PS CS6 gettin "not registered" message

I re-installed PS CS6 from my CD, but it thinks it is the cloud version. How do I fix the problem?

If should ask for s/n. And the cloud does not have s/n.

Similar Messages

Class not registered message opening project

I have re-installed Macromedia HomeSite 5 using my serial
key. I have also copied from my old to new lap top a folder with my
projects and all the .html files. When I now use on my new lap top
the Homesite 5 and take the Project - Open option I am shown a
message "Class not registered". Any ideas?
I saw this on the forum earlier from 2005 but the 2 links are
no longer available.

Hi,
In the event error, can you read what {GUID} encounters the error message? Please also let us know the full error message.
Based on my search, this issue can be caused by the incorrect registry permission settings.
Please launch Registry Editor and navigate to HKEY_CLASSES_ROOT\CLSID\{GUID} to verify the permission settings.
If it does not work, you may run Process Monitor to check what process encounters this error.
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Here is the related blog for your reference:
How to troubleshoot the “Red Arrow” issue in Component Services ( I )
http://blogs.msdn.com/b/asiatech/archive/2010/02/22/how-to-troubleshoot-the-red-arrow-issue-in-component-services.aspx
Kate Li
TechNet Community Support

"Dependent component 368A93BD-833B-11d3-9E98-00105AE811B7:1 was not registered" message appears after installation

After I finished installing the iPlanet Calendar Server 2.1 using the installer,
the following message appeared in the console window:<BR>
<P>
dependent component 368A93BD-833B-11d3-9E98-00105AE811B7:1 was not registered.
<P>
What does this mean?
<P>
It appears that the installation of Calendar Server completed successfully.
The message above will not affect you and can be ignored.

Richard,
I have just applied patch to upgrade from Portal 3.0.9 to 3.0.9.8.1 (Patch applied to loginserver and portal schema) and the External Applications that were previously set up have gone from the portlet.
Does this relate to your note at the bottom:
"Minor issues with Bulk action. 1840420 CUSTOM WRITTEN EXTERNAL AUTH MODULE NEED TO BE UPDATED AFTER 3.0.9 UPGRADE SSOXOID.PKB DOESN'T LOAD.
External authentication modules that were written before 3.0.9 need to be updated after upgrading to 3.0.9. ssoauthx.pks is updated in 3.0.9 and contains additional routines that need to be implemented." ??
If I go to the "Login Server Administration" portlet and select the link "Administer External Applications" I get a list of 5 External Applications that have previously been set up.
If I go back to the Home Page and select "customize" on the "External Applications" portlet I get the message "Your Login Server administrator has not registered any external applications".
Does that mean I should just run 'ssoauthx.pks' & 'ssoxoid.pkb' or do I need to do something else ??
Thanks
Simo

Undeployment of ear-file, "domain ... not registered" message in log

Hello,
We're developping a Java Web Application for SAP NetWeaver Web AS.
It consists of an ear-file, which contains a webmodule (war-file).
NetWeaver writes some error log messages in it's log file (defaultTrace.0.trc) when the software is undeployed from Web AS.
That should not happen.
The message looks like
[permissions_collection_operator]: domain [apps//CN.com/CN Server/servlet_jsp/cn-server/root/WEB-INF/lib/log4j12.jar] not removed, because is not registered
CN.com is the company name, cn-server the context-path.
It seems, that Web AS logs this error for every jar file it finds in web-inf/lib and some additional things.
How to avoid this message? How can the domain (or jar-file) be registered or what's needed?
Surely some simple entries must be included in the ear-file... application.xml...
application-j2ee-engine.xml...
... in any of those files. But where?
Where can one obtain detail information about the log entries

Nobody an idea?
It must be possible to avoid those stupid log messages.
What is needed for deploying a jar-file inside an ear-file into the famous WEB-INF/lib - directory?
Any special steps necessary?

IMessage not getting messages on mac but I receive them on my iPod

I get messages on my iPod so I know people reply but when I look on my mac iMessage I don't have the messages. Same account everything its like my mac isn't receiving push notifications. Is there anyway to "reboot" iMessage on mac. I quit and open. I've signed out and signed back in on Accounts but nothing seems to work.
Thankyou for your help.

Hi,
Can you Send from the Mac ?
Do the Contacts names go red every time you try them in the 'to Spot to Start a conversation ? (Not Registered message)
Or do you get an alert under the text you just sent that read "Not Delivered"
After that check the Contacts app on both are syncing.
NOTE.
com.apple.ichat.StatusMessages.plist only contains this info
It is the info in this drop down
This side has nothing to do with the iMessages accounts.
The same menu appears in the Menu Bar Drop down (if you display it) and the Messages > My Status item.
You could try deleting com.apple.imagent.plist as this holds all the accounts that Login in Messages and FaceTime and may give it an suitable "restart"
9:05 pm Wednesday; April 1, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Cisco SIP Phone 9971 will not register on CME 8.6

Hello,
I'm trying to configure a Cisco SIP Phone 9971,
but it won't register on CME 8.6, which is running on a 2811
The Phone shows this error message: Phone Not Registered.
And when I check the the Status Messages in the Phone, I see the following:
VPN Error: vpn is not configured
Actually, it shows all these 4 messages in a constant Loop:
12:01:59a SEP189C5DB6BD09.cnf.xml (TFTP)
12:01:59a No Trust List instaled
12:01:59a Updating Trust list
12:02:00a VPN Error: VPN is not Configured
It seems that this VPN Error is keeping the Phone from registering.
This is repeated for ever and the Phone never registers; at least that's what it appears.
However, when I do a sh voice register pool, I get the following:
C2811#sh voice register pool 1
Pool Tag 1
Config:
Mac address is 189C.5DB6.BD09
Type is 9971
Number list 1 : DN 1
Proxy Ip address is 0.0.0.0
Current Phone load version is Cisco-CP9971/9.4.1
DTMF Relay is enabled, rtp-nte
Call Waiting is enabled
DnD is disabled
Video is enabled
Camera is enabled
Busy trigger per button value is 0
call-forward b2bua busy 68600
keep-conference is enabled
registration expires timer max is 3600 and min is 120
username adm password adm
kpml signal is enabled
Lpcor Type is none
blf call list is enabled
Transport type is udp
service-control mechanism is supported
registration Call ID is [email protected]
Registration method: per line
Privacy feature is not configured.
Privacy button is disabled
active primary line is: 1010
contact IP address: 172.35.140.12 port 5060
Phone SIS Version: 6.0.2
GW SIS Version: 1.0.0
Dialpeers created:
Dial-peers for Pool 1:
dial-peer voice 40001 voip
destination-pattern 1010
session target ipv4:172.35.140.12:5060
session protocol sipv2
dtmf-relay rtp-nte
digit collect kpml
codec g711ulaw bytes 160
no vad
call-fwd-busy        68600
after-hours-exempt   FALSE
Statistics:
Active registrations : 4
Total SIP phones registered: 1
Total Registration Statistics
    Registration requests : 4
    Registration success   : 4
    Registration failed    : 0
    unRegister requests    : 0
    unRegister success     : 0
    unRegister failed      : 0
    Attempts to register
           after last unregister : 0
    Last register request time   : 18:11:43.551 UTC Mon Feb 24 2014
    Last unregister request time :
    Register success time        : 18:11:43.551 UTC Mon Feb 24 2014
    Unregister success time      :
C2811#
This sh voice register pool seems to indicate that the Phone has actually registered.
But I still get the Phone Not Registered message on the screen!
I did some Debugs and they also seem to indicate that the Phone has indeed registered:
Feb 24 18:01:12.399: VOICE_REG_POOL: Creating param container for dial-peer 4000
1.VOICE_REG_POOL pool->tag(1), dn->tag(1), submask(1)
VOICE_REG_POOL pool_tag(1), dn_tag(1)
Feb 24 18:01:12.399: VOICE_REG_POOL: Created dial-peer entry of type 0
Feb 24 18:01:12.399: VOICE_REG_POOL: Registration successful for 1010, registration id is 1
Feb 24 18:01:12.411: VOICE_REG_POOL: Contact matches pool 1 number list 1
Feb 24 18:01:12.411: VOICE_REG_POOL: GW SIS: X-cisco-cme-sis-1.0.0
Feb 24 18:01:12.411: VOICE REGISTER POOL-1 has registered.
                               Name:SEP189C5DB6BD09 IP:172.35.140.12 DeviceType:Phone
So frankly, I have no idea why the Phone keeps showing the Phone Not Registered message.
I'm pasting the Router's config.
I hope somebody is able to point me in the right direction.
Here is the config. Thank you!
C2811#sh run
Building configuration...
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname C2811
no aaa new-model
dot11 syslog
ip source-route
ip cef
ip dhcp excluded-address 172.25.140.1 172.25.140.10
ip dhcp excluded-address 172.35.140.1 172.35.140.10
ip dhcp pool Data
network 172.25.140.0 255.255.255.0
default-router 172.25.140.1
option 150 ip 172.25.140.1
dns-server 172.25.140.1
ip dhcp pool Voice
network 172.35.140.0 255.255.255.0
default-router 172.35.140.1
option 150 ip 172.35.140.1
dns-server 172.35.140.1
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
voice service voip
allow-connections sip to sip
sip
registrar server expires max 3600 min 120
voice register global
mode cme
source-address 172.25.140.1 port 5060
max-dn 40
max-pool 42
load 9971 sip9971.9-4-1-9.loads
authenticate register
authenticate realm cisco
tftp-path flash:
create profile sync 0004820400584603
voice register dn 1
number 1010
allow watch
name Phone10
label Phone10
mwi
voice register pool 1
id mac 189C.5DB6.BD09
type 9971
number 1 dn 1
presence call-list
dtmf-relay rtp-nte
username adm password adm
call-forward b2bua busy 68600
codec g711ulaw
no vad
camera
video
voice-card 0
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1879153754
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1879153754
revocation-check none
rsakeypair TP-self-signed-1879153754
crypto pki certificate chain TP-self-signed-1879153754
certificate self-signed 01
(details ommited)
license udi pid CISCO2811 sn FTX1146A44H
username admin privilege 15 password 0 admin
redundancy
interface FastEthernet0/0
no ip address
duplex auto
speed auto
interface FastEthernet0/0.25
description Data VLAN
encapsulation dot1Q 25
ip address 172.25.140.1 255.255.255.0
interface FastEthernet0/0.35
description Voice VLAN
encapsulation dot1Q 35
ip address 172.35.140.1 255.255.255.0
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
tftp-server flash:P00308010200.bin
tftp-server flash:P00308010200.sbn
tftp-server flash:P00308010200.sb2
tftp-server flash:P00308010200.loads
tftp-server flash:SCCP42.9-3-1SR3-1S.loads
tftp-server flash:apps42.9-3-1ES19.sbn
tftp-server flash:cnu42.9-3-1ES19.sbn
tftp-server flash:cvm42sccp.9-3-1ES19.sbn
tftp-server flash:dsp42.9-3-1ES19.sbn
tftp-server flash:jar42sccp.9-3-1ES19.sbn
tftp-server flash:term42.default.loads
tftp-server flash:term62.default.loads
tftp-server flash:SCCP45.9-3-1SR3-1S.loads
tftp-server flash:apps45.9-3-1ES19.sbn
tftp-server flash:cnu45.9-3-1ES19.sbn
tftp-server flash:cvm45sccp.9-3-1ES19.sbn
tftp-server flash:dsp45.9-3-1ES19.sbn
tftp-server flash:jar45sccp.9-3-1ES19.sbn
tftp-server flash:term45.default.loads
tftp-server flash:term65.default.loads
tftp-server flash:/Ringtones/Ringlist.xml alias Ringlist.xml
tftp-server flash:/Ringtones/DistinctiveRingList.xml alias DistinctiveRingList.x
ml
tftp-server flash:sip9971.9-4-1-9.loads
tftp-server flash:kern9971.9-4-1-9.sebn
tftp-server flash:rootfs9971.9-4-1-9.sebn
tftp-server flash:dkern9971.100609R2-9-4-1-9.sebn
tftp-server flash:sboot9971.031610R1-9-4-1-9.sebn
tftp-server flash:skern9971.022809R2-9-4-1-9.sebn
tftp-server flash:/g4-tones.xml alias United_States/g4-tones.xml
tftp-server flash:/gd-sip.jar alias English_United_States/gd-sip.jar
control-plane
mgcp profile default
telephony-service
max-ephones 24
max-dn 48
ip source-address 172.25.140.1 port 2000
cnf-file location flash:
load 7960-7940 P00308010200
load 7942 SCCP42.9-3-1SR3-1S.loads
load 7945 SCCP45.9-3-1SR3-1S.loads
load 7962 SCCP42.9-3-1SR3-1S.loads
load 7965 SCCP45.9-3-1SR3-1S.loads
max-conferences 8 gain -6
dn-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Feb 11 2014 07:18:32
ephone-dn 1
number 1001
description Phone 1
name Phone 1
hold-alert 30 originator
ephone-dn 2
number 1002
description Phone 2
name Phone 2
hold-alert 30 originator
ephone-dn 3
number 1003
description Phone 3
name Phone 3
hold-alert 30 originator
ephone 1
device-security-mode none
mac-address 001C.58FB.6E0F
button 1:1
ephone 2
device-security-mode none
mac-address 0014.A981.7F8A
button 1:2
ephone 3
device-security-mode none
mac-address 0006.5356.A4B8
button 1:3
alias exec con conf t
alias exec sib show ip int brief
alias exec srb show run | b
alias exec sri show run int
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
line vty 5 15
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
scheduler allocate 20000 1000
ntp master 1
end
C2811#

VPN is not Configured prints on all phones now with the built-in VPN client if VPN isn't configured. That's normal and is just cosmetic. That should not be causing your registration issues.

Cs6 does not regiser in my Win 7 Registry

I tryed to change my .JPG files to default to CS6, I go thru all the procedures but CS6 does not show up in my sysem default program list. The answer from Microsoft is the CS6 did not register in the system registry when I installed it. How do I accomplish this?
Ruben

Microsoft people are correct ...it is the registry issue because of which the problem is coming up.
NOTE:- Please create a system restore point and do the registry Back up before making any changes , as playing with the registry could be fatal for your computer.
Navigate to Computer\HKEY_CLASSES_ROOT\Applications and find your .exe name ex:- Photoshop.exe
Navigate under its name to shell>open>command.
In the Default change its location to the actual location of the executable, Ex:- "C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe" "%1" ( at my end)
hit okay and then try and reassociate the file type as you normally would.

How can I get the serial number for CS6 - I did not register it on my adobe account and I don't have the invoice/email from Aug 2012 nor the box anymore. I need the number to move software to a new computer.

I am trying to move Indesign CS6 to a new computer.
To do this I need the serial number of the license.
It seems I did not register the number on my Adobe account as nothing is there.
I bought the software in August 2012 - and no longer have the invoice.
i think we got the software by box but am not sure.
Please help!

Hello Karen,
in this case you should search for Adobe's staff members by writing a personal message. They can often help better than we, we the users like you. Please have a look in the forum to persons with this icon under their avatar:
Hans-Günter
P.S.
Very often Preran works as the "good spirit".

Help. Trying use imessage and keep getting an error message that says the person is not registered with imessage

I am trying to use imessage and everyone I am trying to send to I keep getting a message that they are not registered with imessage. They all have iphones and I know for a fact they are all registered. I have tried all the trouble shooting steps I have found so far. I made sure my imessage is turned on and set under my apple id and email, I'm connected to wifi. etc... I can use facetime but can not message anyone. Thanks in advance for you help

Hi, reagans3.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues with iMessage. I am not sure what troubleshooting steps that you have processed; however, there are some additional steps in the article below that may help.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Cheers,
Jason H.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

TS4268 I am able to imessage from my ipad all phone numbers in contacts but one. With it a get an error message that say "number is not registered with imessage". However I am able to imessage that number from my iphone. Any suggestions?

I am able to imessage from my ipad all phone numbers in contacts but one. With it I get an error message that says "number is not registered with imessage". However, I am able to imessage that number from my iphone. Any suggestion?

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

When trying to send a message an error says phone not registered in imessage.

When trying to send a message from my ipad some numbers say not registered with imessage. How do I register a number?

Hi lkgallagher24,
If you are talking about registering your own phone number with iMessage, you may find the following article helpful:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
- Brenden

Working w/adobe cs6 - it now won't update adobe acrobat. Adobe found that I am not registered in a sudoer file and said that I had to call Apple. They said I should submit it to this forum.

I have installed Adobe cs6. After doing so, Adobe Acrobat will not update. I have been trying to solve this problem with Adobe now for 3 months. Today they say they discovered that I was not in a file named "sudoers file." They told me they could not solve that but that I had to call Apple for a solution. I called Apple and they told me that they could do nothing about it (I'm still not sure whether or not they even admitted that it is one of their files). They suggested coming to this forum for a solution.

Their latest is that my file is not registered in sudoers, whatever that is
There are two files named sudoer.vim on my drive (each in a different folder). They're text files. Both are very well hidden and the contents of either would mean little to anyone not versed in terms used in the text. What Adobe could possibly mean by "your name not being in the file" is anyone's guess. My actual name or user account name isn't in any of the files, either, and my apps work just fine.
There is another text file named sudoers (no file extension) that appears to be a list of who has sudo privileges. But again, it's well hidden, requires an admin password just to open it, and means nothing without knowing what to modify, or how without ruining the file.
Which kind of leads back to this:
"Adobe Acrobat application was modified."
Have you run Monolingual or other utility that removes foreign languages from the drive? If so, you can't let it touch certain apps (like anything from Adobe) or you will run into problems like this. Usually, Acrobat won't even launch if pieces of it have been removed, even if those pieces are completely unimportant.
If nothing else, just reinstall Acrobat from the original disk or downloaded .dmg purchase.

When I send a message it says "user not registered"??

When I send a message on new ipad mini, it says "user not registered"??

Oh, sorry I didn't understand what you meant.
There are some third party apps that let you send text messages from the iPad - to any phone - Android or iPhone.
Some come with a fee or a monthly fee to send the messages. I don't know that much about the, but you can search the App Store or use a Google search.
Here is one example above.

SMS in Yosemite messages not working. "Not registered with iMessage"

Just updated today to Yosemite. Macbook Pro 2013 (current retail model) with upgraded RAM and flash storage. iPhone 6 running 8.0.2 with recent back up to iCloud.
When sending iMessages to my normal iMessage contacts, everything is ok. This update should also allow for continuity with SMS, that they show up as Messages in the same application. I cannot get any messages which are not iMessages to send out. Each time I attempt this, I get the error "User is not registered with iMessage." Which, yes, duh. That's the point. I've sent and received SMS messages on my phone with out error, but still have not been able to initiate or respond on my Mac with Messages. My contact card only has the same phone number which is registered to the same iCloud account for both the phone and the Mac.
I've restarted the phone and logged in and out of iMessage in hopes of a refresh. I'm out of ideas as to how to get them to sync up, or whatever it is they need to do.
Is there a step that I am missing? It should, in theory, just work, but I can't find any messages on this. Any guesses?
Thanks!

Hi,
It seems that some people are experiencing issues with Logging in fully to the iMessages Servers from their Mac.
There is one Error Messages that is seen that is known to be very similar.
This Error can only be fixed by Contacting Support.
What is does prove though is the The Apple ID in use can be rejected on a Device by device basis, i.e. it will work on a iOS device or even another Mac but not on one particular one.
Sometimes deleting the Keychain item for the iMessages Login can help (then Restarting the app)
It is called IDS: yourApple ID- Auth Token
If deleting this does not work try repairing the Keychain.
After that I would contact Apple Support. You may have to speak to a Level 2 person as Level 1 people try to fit everyone into Software or hardware issues and charge for Out of time Apple Care.
Fixing and Apple ID/Account is free.
7:22 pm Tuesday; January 13, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

PS CS6 gettin "not registered" message

Similar Messages

Maybe you are looking for