PS CS6: Images sometimes not saved when using Close All and instructed to save

I thought I had made a crazy mistake when this happened earlier today, but it just did it again and I was paying close attention. 
I often open multiple images to make several changes, then use Close All and when it prompts "Do you want to save changes to ... before closing?" I check off the box to "Apply to all" and say Yes.   This saves lots of time when adjusting several multi-hundred MB images.  Imagine my surprise today when it closed an image without saving!  I had to repeat about 30 minutes of work as a result. 
I thought I had somehow accidentally clicked "No" to saving, so I made sure to pay close attention the next few times I used Close All to save work.  It worked fine until a moment ago when it did it again.
Has anyone seen something like this?  I can't find anything in searching.  In all my time using this feature in PS I never once had a problem before.

Thanks for the reply.
I just upgraded to CS6 from CS5 a few days ago, and this is my first week in heavy usage. 
I do have Save in Background turned on.  I am saving locally.  I also have auto recovery saves turned on, at 5 minute intervals (CS6 has crashed a few times on me)
Yesterday I used Close All with Save maybe 10 times, and it exhibited this behavior 2 of those times. 
In the two cases, I had 3 PSDs open, each a little over 400 mb in size.  It seemed to save two of the images, but left one unsaved.  I noticed that instead of spending several seconds saving, it would quickly just close that image - as though it believed no changes had been made.  The changes that had been made to the image were routine - add some adjustment layers, some masks etc.
I have tried to reproduce it by opening the same images, making similar changes and then repeating Close All with Save, but so far no (bad) luck.  Idle speculation - could it have something to do with the frequent interval of autorecovery saves that I do? Some kind of conflict?  Or is it something to do with background saves?  Definitely never saw this in previous versions of PS.
As a workaround, I have made a simple action that saves an image and apply it in batch.  I just can't risk losing work.

Similar Messages

  • I am able to change and add bookmarks, but these changes are sometimes not saved when I restart Firefox.

    Since updating to Firefox 4, changes to bookmarks are saved sometimes after restart, but not usually (maybe 25% of the time). The problem sounds exactly like what is described on the [[Bookmarks not saved]] help page, yet after making all the recommended changes, the problem persists. I have also performed the recommended actions on the [[Toolbar keeps resetting]] help page, with no luck there either.
    The only other thing that I can think of that may be helpful is that I use Firefox Sync between two computers, and both seem to be having this problem.

    I have some more information, in case it helps. During one Firefox session, I made about 8 changes to my bookmarks.When I restarted Firefox, the first few changes I had made were saved, but the rest were not. Additionally, the favicons that were present during my last session (that I hadn't had before that session) were reverted to the default favicon. I hope this helps!

  • Image does not diplay when using "Pull Down Menu with image"?

    Image not displaying when attaching image to the Parent in the New DHTML Pull down menu list.Displays a blank grey image. Any Ideas?
    Cheers.

    Hello,
    Yes, it seems pretty obvious that you would have to replace all for of them otherwise in that condition the generic one would show up.
    But to spell it out you need to replace in . List Template Current , List Template Current with Sub List Items , List Template Noncurrent , List Template Noncurrent with Sub List Items.
    This is one of those thngs you should have just tried it took me longer to type all this out than it would have taken you to test.
    Carl

  • Tabs not saved when Firefox closes!

    Why oh why has Firefox 6.0.2 (on Mac) stopped automatically saving and re-opening TABS when restarted?
    I've read a million Help articles and verified all the recommended settings are applied but I'm sorry, this new Tabs functionality is counter-intuitive and just plain misleading. Firefox saves Tabs, but only if it's closed in *this* particular way? Please. I'm having enough trouble adjusting to the use of a Mac, without Firefox compounding the problem by removing / obstructing the use of a feature that was previously easy to use, and made perfect sense! If we click "Show my windows and tabs from last time", it means we want Firefox to SHOW MY WINDOWS AND TABS FROM LAST TIME! Even if we click the "X" button to close Firefox.
    Anyway the bottom line is that I've lost all my working TABS (again), but this time clicking on the History menu, the "Restore Previous Session" command is DISABLED. What options do I have? I haven't restarted Firefox once since having my Tabs disappear, so they should still be saved somewhere. (in the BAK file?)
    And I don't want to have to sift through months of history to try and find all the Tabs I had open!
    This new logic that makes it more complicated to save Tabs across sessions is NOT an improvement!
    Thanks in advance.

    Tabs are only saved if you close (Firefox > Quit) the Firefox application while those tabs are still showing. If you close a window and still have the menu bar visible then you wont reopen already close tabs. You may need to be able to reopen the three last closed windows via History > Recently closed Windows.

  • Page tiles not showing when using Adobe Muse and Web marketing hosting

    Hello
    I have created a muse site that has the correct page titles showing in the browser when using the web basics hosting. But I need the same site to now contain a blog so have changed the hosting to web marketing, this has resulted in the pages not showing their page titles in the browser
    Does anybody know why this is or what I can do about it?
    thanks for any info
    regards
    Martin

    Page title should not change with site plan change unless it is done manually , or if modified file is uploaded from Muse.
    Please check the titles added on page if they exist or not, if still same issue , provide the site url.
    Thanks,
    Sanjit

  • Versions not saved when using iDisk??

    Right now I am unable to save a document with versions when I am saving it to my iDisk.  Is this not supposed to work with iDisk??  When I save the document to my desktop I can go back and see all the versions.  However when I move that same document to iDisk and open it, I am no longer able to see the different versions??? m
    Is this the expected behaviour??
    Thanks

    As far as I know, versions only functions on documents kept locally (on the internal drive).

  • Quiz slide not advance when using question pools and advance answer options?

    Hi,
    I am using CP 5.5. I created a small test where I have just 2 question in a question pool.  The questions are using the advanced answer options to show some specific feedback. When I insert the questions in to the project using a random question slide, after the user answers where you should be able to press Y or click to move on, I click, but nothing happens.  You can't get off the quiz slide.  The quiz slides work fine when they are inserted in the project as reqular quiz slides, but not when they are being pulled from a question pool.
    Is this a known bug? Is there a workaround? Anyone else run in to this?
    Thanks!
      Lori

    I was having the same problem on the last Random Question slide (total 10 RQ slides), and was able to fix it by following the next steps:
    Make sure Quiz: Pass or Fail actions are set to Continue for both Passing and Failing actions in the quiz preferences.
    Delete the RQ slide not advancing, then duplicate one of the RQ slides working, and assign your question pool to the new slide if different from the original duplicate. This step will make sure you are using a good working RQ slide.
    For some reason, my last RQ slide was corrupted and wasn't advancing to the Score slide at the end of the quiz.
    I can finally finish this project.
    Good luck.

  • In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

    In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

    Please don't post the same question multiple times!

  • HT2506 I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.

    I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.

    I too experienced the same issue.  Here are my details:
    Recently I bought a 15” Macbook Pro and last night I tried to connect and use a Edirol FA/66 Firewire 400 connected outboard audio interface using a Firewire 400 to 800 adapter then connected to a Firewire 800 to Thunderbolt adapter since the MBP doesn’t have a native Firewire port.  What I observed is that the Edirol was not getting power from the bus nor did the MBP (running Yosemite) recognize the Edriol.  At first I thought there was a problem with the Edirol since I haven’t used it in a while but when I connected it to an older MBP that has a native Firewire port, it worked normally.  Is there a known issue with these sorts of external audio interfaces working properly with newer MBP running Yosemite?  I’m hoping that a software update will fix this issue.

  • Images on Facebook do not appear when using different web browsers

    Images on Facebook do not appear when using Safari on my Macbook Pro (I've tried Google Chrome too with the same result).  This makes me think it's a setting within OS Mavericks that I'm missing.  I have not seen this issue on any other computers.  This only occurs on my, and others' profile pictures on my profile page and on the news feed, not photos that are posted in albums or on walls.  and yes, i have images enabled in Safari.
    In safari the images don't appear, and in their place is a small blue "?" square >>.
    In Chrome it appears as a broken image link >>
    Has anyone encountered this?  Is there a fix?  It is very annoying.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

    Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

    You should ask in Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • I'm using iphone 4s, whenever i take a photo using front camera mirror view of the image is NOT saved

    I'm using iphone 4s, whenever i take a photo using front camera mirror view of the image is NOT saved. i.e, left becomes right & vice versa. To elaborate if you take a photo with your left hand index finger on your left chin it shows up as though i'm holding my right hand index finger on my right chin. This was not the case initially, i suspect this happened after photoshop app. was installled. Can someone assist?

    Ok!! After checking couple of my friends phone i realise this is BY design!!.. i still don't understand the logic behind this though.Nevertheless this ain't a bug!!!

  • File browse image item not saving

    Hi,
    Im faced with a problem whereby i created a file browse item to load/save images, thing is the image only gets saved when i edit the record and not on creation.
    Any help please.
    Thanks

    Forms doesn't support multipage tifs.

  • Sent messages are sometimes not saved

    Hello,
    This is a follow up to this thread, which was never answered and is now archived:
    http://discussions.apple.com/thread.jspa?threadID=2213207
    In Mail.app, using IMAP, my sent messages are sometimes not saved. I'd say about 1 in 20 never appear in my Sent folder. The recipients always receive these messages, so it's not a delivery problem. I just don't retain a copy of them. This is very frustrating if I send a cost estimate to a client, or a detailed description of a technical problem that I need to refer back to later.
    I've rebuilt my mailboxes and I've checked my IMAP folders on the server via a webmail interface, and the messages are not there.
    Has anyone else experienced this? It's hard to believe I'm the only one, but it's hard to search for this problem because my search results are always full of people who have lost or can't save -any- of their sent messages. My problem is intermittent and random.
    Thanks,
    -Arlo

    I have a similar occasional problem with an IMAP account using a Comcast Business Class Exchange server. I use Mail and my iPhone to access the account; I'm running OS X 10.6.4 on my laptop but my "sent messages" issue predates the latest release.
    The first time I noticed this issue I thought, "I'll just access my mail via the Comcast web portal. It'll be in the 'sent' folder there." No dice. The "sent" messages simply never stay on the server, yet my recipients get them.
    It's distressing. First, the solution would appear to be a switch to a MS mail client, which I swore off years ago. Second, I rely on having a "sent" message as a record. I switched off IDLE per your suggestion, Ernie, but otherwise I'm in the same boat as the others here. Please keep this thread alive. I'm hopeful that this can be resolved.

  • My Hotmail login details only save in IE, but do not retain when using Firefox as broswer. There seems to be something in FAQ's, but can't resolve

    When using IE, my Hotmail details, always save for next login (using the "keep me logged in" tick box).
    Using Firefox to open Hotmail, my details are never retained and (using the "keep me logged in" tick box also), I have to put full details in each time, rather annoying....does Microsoft do this on purpose to retain IE users?
    As mentioned above, there does seem to be something in the FAQ's, but even following this, i can't seem to get this to stop happening, so whilst wishing to use Firefox more often, for Hotmail access this is a bit of a pain!!!

    I'm not sure whether such Hotmail features work with Firefox.
    Websites remembering you and automatically log you on is stored in a cookie.
    * Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
    Make sure that you do not run Firefox in Private Browsing mode.
    * https://support.mozilla.com/kb/Private+Browsing
    Do not use Clear Recent History to clear the "Cookies" and the "Site Preferences"
    * https://support.mozilla.com/kb/Clear+Recent+History
    Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

Maybe you are looking for

  • Menu Bar In Muse CC 2014 vs. Menu Bar in Muse V7.4

    Ok! I admit to old age and failing eye sight but I something I do not understand is why are their two versions of Muse and which one should I be using? Muse 2014 appears to have more features but the menu bar and subsequent drop down menu's are extre

  • How can I import all photos from iPhoto and delete all the ones currently on my iPad?

    I uploaded all of my iPad's photos to iPhoto('08) thinking it would be easier to delete and organize them. Now that I've done that in iPhoto I need help finding out how to delete all the photos from the iPad and have the iPhoto photos imported from i

  • Dates at header level

    Dear experts Is it possible within WebIC to display dates at header level for a service transaction (such as Service ticket)? Currently the SLADates view only show dates at item level. Thanks a lot Stephanie

  • I tried installing a coupon printer and nothing came up in the download box. Please help!!!

    I was trying to print a coupon for Huggies pullups and it said to install coupon printer follow three steps which I did but when the download page came up it was blank, so I couldn't click open. I tried the troubleshooting page but nothing I did work

  • Different backgrounds for menubar Spry UI 1.7

    All the q/a I've found refer to previous versions of MenuBar, not the newest 2.0 MenuBar that's in Spry UI 1.7 / DW CS5. I want to use different background images for each of the top level MenuBars. I've found the place in the CSS, #MenuBar .MenuItem