PS CS6 Shows Transparent Pixels Over Image When Zooming Past 50%

I'm not sure why, but Photoshop just started doing this after I converted my files to a smart object. When I try to zoom in past 50%, it displays these transparent pixel squares over the entire image. I tried rasterizing and flatting the image back, but that didn't do anything. It seems to keep doing this. Any suggestions how I can fix this?

That sounds like a typical display driver problem.
If you have a PC, visit the web site of the maker of your video card, seek out and download/install the latest display driver for your hardware and OS, and reboot (even if it doesn't require it).
If you're on a Mac, you might find that manipulating the graphics processor-specific settings in your Photoshop-Preferences-Performance dialog (and in the Advanced settings) might help. Make sure to fully Quit and restart Photoshop after making changes there.
-Noel

Similar Messages

AI CS6 vectors turn into embedded image when using clipping mask

AI CS6 vectors turn into embedded image when using clipping mask, how to solve it?

With the Clipping Mask selected go here

Any solution to pixelated images when zooming?

Wondering if there is a solution to prevent pdf images on transparent background from pixelating when zoomed in.
This is a screen capture. There are two knife images. The large white knife is a pdf on a transparent background saved at 108 ppi in photoshop, it is part of a object state/slide show (saved as vector obviously since type is sharp) that fades in. Doesn't seem to matter what size/dimensions I use, it still gets blurry when you pinch and zoom.
See here:
The smaller black knife image at top left is also a pdf on transparent background, saved at 108 ppi in photoshop. It is not an object state,etc.
The knife images look fine at full screen on the iPad, but once you pinch and zoom, both images loose focus and become blurry.
Any solution to this? The images need to be pdf (or png - which I understand will not scale at all), because they are on transparent backgrounds.
Thanks!

Hi gemmie,
Update to latest firefox 15.0 , your system details said you have 14.0.1(because 14.0.1 it is unsupported)
then :
try to [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems#w_turn-off-hardware-acceleration Turn off hardware acceleration] in Firefox and "disable the hardware acceleration" in the Flash Player too :
http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html
also try to [http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3 Disabling Protected Mode in Flash] (the link is for 11.3, do the same for 11.4), see the same in "Last resort" in the next link from adobe forum http://forums.adobe.com/thread/1018071?tstart=0
If you still have crashes you must [https://support.mozilla.org/en-US/kb/flash-113-crashes#w_step-2-install-flash-10-3 Install Flash 10.3] but first uninstall your current version with [https://support.mozilla.org/en-US/kb/flash-113-crashes#w_step-1-uninstall-flash adobe uninstaller program] .
It is not so easy, but not so difficult to, you can do it. If you need any help here we are.
thank you

Why does Fireworks CS5 keep resizing images when I paste them?

I am having a problem in Fireworks CS5 where images that are copied and then pasted into a new document automatically re-size and become either very tiny or very large.
I have taken some screenshots to show this more clearly: (this website only allows me to upload images of 450 pixels across so they are not too clear)
Image 1: I have taken a large image and reduced its size to 100x100 pixels (highlighted in red).
Image 2: I have created a new document which is 100x100 pixels in size.
Image 3: I have copied the image from Image 1 (control + C) and then pasted it into Image 2 (control + V). The image was 100x100 and the new image was 100x100 yet when I paste the image it suddenly becomes 313x313 in size and is too large for the new image. Sometimes it becomes tiny when pasted and is too small for the document.
Can anyone help with this matter? Perhaps I am missing something obvious, but I have tried searching for solutions and tried a range of methods (different kinds of copy and paste etc), but nothing seems to help. Please let me know what I am missing!
Thank you for your help! As I said I am using Fireworks CS5. I am using Windows 7. If there is anything else you want to know just let me know.

I don't know what could be causing the copy/paste resizing issue, but here are a couple of ideas that may help with your workflow:
You can create a new document for animation by choosing File > Open..., selecting multiple images, and clicking the "Open as Animation" option. This will place each image file into its own State.
Consider using commands from the States panel fly-out menu—e.g., Duplicate State, Copy to States, etc.—to move objects from one state to another.
Other commands to copy objects within Fireworks include Edit > Duplicate and Edit > Clone. These do not involve the clipboard and may sidestep the resizing problem.
Sometimes with bitmaps, I like to convert them to symbols, as it allows me to resize the bitmap freely without losing the original resolution. (This might introduce extra steps, but it could allow you to correct the image size after it's been pasted incorrectly.)
It's a longshot, but I wonder if it would help to empty the clipboard contents once in a while, to clear out old data.

Blurry images when zooming in Survey & Grid View

When I am in Survey View and hit the Z key, some of the previews are blurry. The same thing happens in Grid View. However, in Loupe View, the images are fine when I the 'Z' key. Using Survey View would make things go faster when making my picks. Any ideas why this happens?
I tried rendering 1:1 but the returns a mesage that says renders are up to date and rendering was done.

cppasm wrote:
This is definitely a bug. I can see it too, and it's little bit annoying. LR 4.1, Win7 x64.
To reproduce just select two images, render 1:1 previews to be shure they are present.
Then press 'N' to switch to Survey mode, and now press 'Z' to zoom in active photo.
It gets zoomed, but looks like LR zooms in standard (smaller) preview instead of using 1:1 preview - the result is blurry and a little pixelated, it definitely lacks resolution.
But when in the Loupe view (switch view using 'E') and zooming all work just fine - the image is at full resolution and is sharp.
And even if I switch from Survey to Loupe with zoomed in image - it still stays blurry.
To get sharp image I need to zoom out and then zoom in again.
So in short - it looks like 1:1 preview is used only when image is zoomed in from the Loupe view.
At least others seem to experience the same thing so I know it's not just me. I'd say it's more than a little bit annoying because it causes you to second guess yourself and you constantly have to switch to a view to see if the image is actually sharp or not. It really slows down the workflow.

Tiger's Preview application does not antialias images when zooming

On windows when you double click an image and zoom in it uses standard bicubic interpolation to give the magnified image a natural look.
In OS X, when images are magnified in Preview the pixels are magnified 1:1 which gives a horrible pixellated look. On some images clicking "actual size" gives a non 100% scale rendition too.
Is there any hack or trick to let preview magnify images normally or better?
It's weird, you'd think some uat tester would have noticed the pixellated zoom and just changed the magnification algorithm.

In ~/Library/Preferences/com.apple.Preview.plist, there is an entry called
Root->Preview->PVImageHiResDrawingInZoomInMode
which is set to zero by default. Change it to 1, save and restart finder. This should enable interpolation. It seems to work OK but no promises - they must have turned it off for a reason (it's actually pretty rubbish compared to the windows one and for some reason not as good as the one used in slideshow mode?!).
Message was edited by: chris_R

Photoshop CC distorted image when zoomed out. Text, edges and Straight lines.

I get this distorted image when working on a file. When I zoom in its fine. But as soon as I zoom out all the lines, text , and edges start to become distorted. I've checked that all my drivers are up to date. I've re installed photoshop and still the same thing. Any Suggestions. ( files look fine when saved or exported, this just happens while Im working )

That looks like a Moiré pattern. Did you scan the image?
If not, can you tell us what operating system?
And is your video card driver fully up to date from the maker's website?

Canvas gets a red 'filter' over image when transport is stopped!

Hi, I have had this problem in the past, and it mysteriously disappeared, but now it is back- and it doesn't seem to be going away. When I am working in the timeline, and hit PLAY, the video image in the Canvas looks just fine. But when I hit STOP, there is a red hue over the canvas, with an opacity that shows the proper image beneath it. When I hit PLAY again, the red goes away. This crazy situation is making it practically impossible to work on color correction with the 3-Way. Help! This problem doesn't occur in the Viewer window. I am working with Final Cut Pro 7.03 on a Mac Pro 10.7.5
Thank you for any advice on how to fix this weird problem.
Bob

Pull down this menu in the canvas window:
Make sure it's set to RGB instead of RGB+Alpha

Keyboard command mistake activates unwanted guides over image when moving cursor.

inadvertently i have hit a keyboard command that has given me an unexpected result. When I pass the cursor over an image horizontal, vertical and 45 degree angle guides pop up over various parts of the image. Also paths, anchor points, intersects and alignments are defined in very small text that follows the cursor, especially the pen tool. All of these things flash on and off as I move the cursor around the image. I find this very distracting and want to turn off this feature but I don't know which key I hit to turn it on. Any thoughts?

Cmd(Ctrl)-U is the toggle for Smart Guides.

Mountain Lion showing red tints over images,thumbnails and buttons

Hello everyone, I've been having an issue ever since I updated to mountian lion a few weeks ago.
Images are showing up with red tints over them for no reason, and I'm not sure what's going on.
Here is a few examples.
I have a Macbook Pro Mid 2009 edition.
Thank you for your help,
-Max

Here is a link to them,
http://imgbin.org/index.php?page=image&id=9164
http://imgbin.org/index.php?page=image&id=9165
http://imgbin.org/index.php?page=image&id=9166

ID CS5 is pixelating my images when I print booklet. How do I fix it?

When I hit print booklet all my images are pixelated when converted to a PDF in Acrobat Distiller. The resolution of the images are at least 300 dpi and when I simply just export the file the images are very clear. However when I print booklet they are all pixelated. Any suggestions?

Check the distiller settings. It sounds like it's set to downsample severely

Photoshop CS5 shows canvas with old image when opening a NEW file

Hi,
Everytime I try to create a new file in photoshop with FIle->New, the same last image I was working on shows in the canvas.
This is bizarre behavior. Has anyone encountered this problem?
thanks

Sounds like a buffer isn't being cleared in the display driver...
Visit the web site of the maker of your video card and download/install the latest video driver for your particular hardware and OS.
-Noel

Adjusted photos in full screen mode show digital garble over image

Since installing iPhoto08 viewing photos in full screen mode is very disappointing and frustrating. Some images will appear with this (for lack of a better term) digital garble over half or the full photo. Sometimes by switching to the next or previous image it will correct itself. It seems to happen only with photos I've adjusted. This never happened with iPhoto6 that I upgraded from. These photos are all 8 mpix, my mac is a G5 2.0 with 2 GB RAM. I've also noticed that the over all perfomance of adjusting the photos is very slow as well. I posted the image here www.capacitornetwork.com/iPhotoDigitalGarble.jpg. Compare the left and right halves (The photo was originally shot B&W). Thanks!

zaadar:
Welcome to the Apple Discussions. Have you checked the HD with Disk Utility to see if it needs repairs? Not disk permissions but the disk itself. Also delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. A corrupt preference file has been known to cause some strange problems. It's worth a try.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Unable to set a transparent panel over Images for annotations

Hi All,
I am developing a Swing Application for image processing.
My aim is to display the image on a JPanel and over which the user should be able to draw different geometrical figures(line,circle,polygons,etc) and write annotations on that. These drawings should not affect the original image.
Also, these drawings should be movable, like if I zoom the image, drawings over the image should also zoom in the same ratio.
Initially, I thought of using the GlassPane but stuck up with some issues, relating to its implementation.
It would be great, if you could suggest me some guidelines or pont me to some resources for the same.
Any help in this regard will be highly appreciated.
Thanks,
Manu
Edited by: manu_agarwal on May 8, 2009 12:46 PM

Hi Adam,
Thanks for your reply.
My intention is that after draing annotations on the image, if the user wants to zoom or move image(panning), the annotations should also move.
Thanks,
Manu

Blurry Illustrator images when zoomed in within AE?

Hi,
I'm animating images I created in Illustrator CS4 using After Effects CS4, and am having a problem with Illustrator images being blurry when I zoom way in using a camera layer within After Effects. I've tried hitting the 'Continuously Rasterize' switch within AE. But when I do that, the camera layer isn't working right because I'm unable to zoom in or out. I'm a relative novice in both these programs, but I'm puzzled by the problem because right now it involves scaling Illustrator layers down and not up, which I thought would be better even if my layer wasn't vector-based. (Someone suggested making sure my layers are vector layers. I assume they are, because I created them as RGB layers within Illustrator. But please let me know if I'm wrong on this point.) Again, I'm scaling these layers down, and not up, so I'm confused by this problem, because my understanding is this kind of thing usually involves scaling layers up. For some context I'm trying to create a shot where I zoom from an extreme CU on a person's face, to an extreme wide shot of the room the person's in.
Any advice on this problem would be hugely appreciated!
Neil

First thing to do is to determine if your "images" are raster or vector. How were they created? Where they photos that were imported into illustrator? Did you draw them using one of the illustrators tools such as the pen tool, or one of the shape tools? If you did the former, scaling up will cause issues like you have. With the latter you can scale up all you want the continuous rasterization will take care of that.
If it is the latter, it may have to do with how the image is in AE. You said you are moving the camera, but what is the image placed on? Do you have 3d enabled so the z axis is available for your objects and camera?
If it is the former, set the resolution of the photo itself so the area that is zoomed in on is at 720x640 or what ever your medium will be. In other words if you plan on zooming in on a photo, your photo has to be greater than the medium it will be displayed on. If the photo is less than that, you will get pixelation.

PS CS6 Shows Transparent Pixels Over Image When Zooming Past 50%

Similar Messages

Maybe you are looking for