PS CS6x64 Liquify Crash Win7 x64
HELP - PS CS6x64 Liquify Crash Win7 x64
current version installed: Photoshop_CS6_13_0_1_3_upd
current version when viewing About: 13.0.1
Liquify tool works, but crashes after closing Liquify window. A simple 5x5in 72 DPI file will cause it to crash.
nVidia GTX 680 current drivers.
Deleting Prefs did not help.
Step 1. Hold down the Alt + Ctrl + Shift keys as you click on the icon to open ps. When asked if you want to delete the settings file, say yes.
Step 2. Reset the preferences as above.
Step 3. Close ps and let the file regenerate.
Message was edited by: sadicus
We have seen similar problems in house. We found the 335.23 and 334.89 drivers can cause crashing or hanging on Liquify exit. But the 332.21 driver seems to work without problems. The 332.21 driver is available from the NVidia website.
We are working with NVidia to resolve this.
Similar Messages
-
PS6b1: "The GPU Sniffer Crashed" Win7 X64
PS CS6B1 reports "Photoshop detected an error in your display drive" and disables GPU settings when running on Win7 x64 system with Asus EAH 6970 (AMD Radeon 6970) graphics card. I verfied that the latest Asus/AMD drivers are installed and working properly.
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3200 MHz
Built-in memory: 24566 MB
Free memory: 18591 MB
Memory available to Photoshop: 22238 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
The GPU Sniffer crashed on 3/24/2012 at 8:27:58 AM
Display: 3
Display Bounds:= top: 146, left: 2560, bottom: 1226, right: 4480
Display: 2
Display Bounds:= top: 178, left: -1920, bottom: 1258, right: 0
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1440, right: 2560
No video card detected
Serial number: Tryout Version
Application folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: E:\scratch\
Photoshop scratch has async I/O enabled
Scratch volume(s):
E:\, 1.82T, 1.70T free
Required Plug-ins folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1642
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 5,0,10,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Bas Relief 13.0
BMP 13.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
ZigZag 13.0
Optional and third party plug-ins:
Camera Raw 7.0
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEWhat display driver version do you have?
Try this: Go to the ATI web site (really, it's the AMD web site), and locate and download/install the latest Catalyst package for your hardware and OS (if memory serves, it's 12.3).
-Noel -
AIGPUsniffer.exe Crashes Win7 x64 - Illustrator is Unusable
Hello!
I have recently installed Illustrator via the Creative Cloud onto a brand new Lenovo X1 Carbon (Intel HD graphics). Upon launching the program an error is thrown saying AUGPUsniffer has crashed. If I ignore the error window Illustrator will still launch but when I try to open a file it will crash and require a force close. I have reinstalled the GPU drivers and Illustrator itself. Any help at all would be appreciated as there is not a single mention of the AIGPUsniffer crashing in this community.
AISPUSniffer.exe has stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: AIGPUSniffer.exe
Application Version: 0.0.0.0
Application Timestamp: 536d33bf
Fault Module Name: ig75icd64.dll
Fault Module Version: 10.18.10.3621
Fault Module Timestamp: 5376e483
Exception Code: c0000005
Exception Offset: 00000000001680ca
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033
Additional Information 1: 082c
Additional Information 2: 082cbe90057efa4e1e359196c0bde49e
Additional Information 3: ee67
Additional Information 4: ee67b51aa986774002e5960ec98ebe9eI'm seeing this issue as well. I have Illustrator install on two machines--a Surface Pro and a 2013 iMac, both running Windows 8.1 (fully updated). On the Surface, Illustrator successfully connects to and syncs my Libraries from Create Cloud. On the Mac, it doesn't. Similar to what MrJDuff saw, AIGPUSniffer.exe is crashing on the iMac.
Crash info, copied from the event in Event Viewer:
Fault bucket 85990926477, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: AIGPUSniffer.exe
P2: 1.0.0.1
P3: 547efa5f
P4: AIGPUSniffer.exe
P5: 1.0.0.1
P6: 547efa5f
P7: c0000005
P8: 000000000001631e
P9:
P10:
Attached files:
C:\Users\[user]\AppData\Local\Temp\WER5AE8.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\[user]\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_AIGPUSniffer.ex e_ab4c8ab98c6b5b8adb8123f468de186e16b62e_2d18b687_169d5c30
Analysis symbol:
Rechecking for solution: 0
Report Id: fde87079-8410-11e4-8291-c8e0eb326620
Report Status: 0
Hashed bucket: de70e9428f446ad6333f9b84e4a30dba -
Minefield crash after opening. Safe mode OK Win7 X64 ATI HD4890
When I launch Minfield it's open then crash in a second. Launching in safe mode it's working.
My PC use Win7 X64 graphic card ATI Radeon HD 4890.
This happen from 5 builds. before it was working perfectly.
Does it mean that I have incompatible soft version ?
It crash even if I disable all add on.
Safe mode is OK
Thanks for your help
I love FirefoxThanks for your legwork in searching for this solution. I had the exact same issue, and it was the ''javascript.options.tracejit.content = false'' tag that I had to change from true, and now minefield starts up normally.
-
PrE-10 Will not start in Win7(x64)
I sincerely hope this is not redundant, but I have spent days on this forum looking for answers, but with no luck. I have seen many similar questions, but none of the 'fixes' proposed are relevant, or do not work for me.
History:
I have been running PrE-10 since its release, on Win-7(32-bit). I recently had a system crash after installing Windows-8 Beta and had to wipe my hard drive and start from scratch. This time I loaded Win-7 (x64). All my original apps I had stored on an external drive. Some re-installed, some not. I had to re-download PSE-10, and PrE-10 as 64-bit apps.
PSE-10 and the associated Organizer, work fine as before. PrE-10 however does not start. I get the splash screen, with the options of NEW, OPEN and Organizer. Of these, only Organizer opens. The other two options either bring up a Windows Error box 'Pre-10 has failed to start', or it just sits and does nothing.
It is not a system limitation as I have far more than the requirements needed to run it and as I said, it worked fine in the 32-bit version, and nothing else has changed (that I have input), so I am baffled.
As I said, I have done many of the proposed fixes I have seen on the forum, if they are pertinent to my system, and even some that were not. I have now completed the reinstallation of most of my applications, and so far only PrE is causing a problem, but it is very important to me as I am working on a project that requires it.
I have done a Belarc report, but I do not see a link to upload it. I see links for images, videos, tables and weblinks, but nothing for files (pdf). I will attempt to load it as an image and see if this works. I do not want to post it as text or HTML as it is 7 pages long! (Nope, it does not insert). Perhaps someone can tell me how to upload the file.
Here is a system summary:
OS Name
Microsoft Windows 7 Ultimate
Version
6.1.7601- Service Pack 1 Build 7601
Other OS Description
64-bit
OS Manufacturer
Microsoft Corporation
System Name
DOUG-IQ775
System Manufacturer
HPQOEM
System Model
SLIC-CPC (TouchSMart IQ-775)
System Type
x64-based PC
Processor
AMD Turion(tm) 64 X2 Mobile Technology TL-58, 1900 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date
American Megatrends Inc. 5.15, 11/26/2007
SMBIOS Version
2.4
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume1
Locale
United States
Hardware Abstraction Layer
Version = "6.1.7601.17514"
User Name
DOUG-IQ775\DOUG
Time Zone
US Mountain Standard Time (AZ)
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
4.00 GB
Current Available Physical Memory 1.68 GB
Total Virtual Memory
8.00 GB
Available Virtual Memory
5.32 GB
Page File Space
4.00 GB
Page File
C:\pagefile.sys
STORAGE
USB Flash Memory, s/n 001D0F1FCF2DC8C08406020B, rev 1.00
Generic Flash Disk -- drive 8, 8GB s/n 03483DBB, rev 8.07
WDC WD16 00BEVS-60RST0 -- drive 7, 160GB s/n WDC WD1600 WD-WXC108351497
Generic CF Reader -- drive 5, s/n 058F12M111B, rev 1.01
Generic SM/SD/MS Reader -- drive 6, s/n 058F12M111B, rev 1.00
Century EX35SW4_SB4-A USB Device -- drive 1, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-B USB Device -- drive 2, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-C USB Device -- drive 3, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-D USB Device -- drive 4, s/n 011E011D3B, rev 0100
HARD DRIVES
c:/D:(NTFS on drive 0) *
500.11 GB
k: (NTFS on drive 7)
160.03 GB
w: (NTFS on drive 1)
250.06 GB
x: (NTFS on drive 2)
250.06 GB
y: (NTFS on drive 3)
250.06 GB
z: (NTFS on drive 4)
250.06 GB
WDC WD16 00BEVS-60RST0 USB Device [Hard drive K:] (160.04 GB) -- drive 7, SMART Status: Healthy
WDC WD50 00AAKS-65TMA SCSI Disk Device (500.10 GB) -- drive 0, s/n WD-WCAPW3069745, SMART Status: Healthy
Drives new – drive encryption
Memory Modules c,d
1660.37 Gigabytes Usable Hard Drive Capacity
914.49 Gigabytes Hard Drive Free Space
CD/DVD
TSSTcorp DVDR/RW TS-T632L ATA Device [Optical drive]
Software Versions & Usage
i Adobe Download Assistant
i Adobe Help
i Adobe Photoshop Elements Editor Version 10.0
ı i Adobe Photoshop Elements Version 10.0
ı i Adobe Premiere Elements Version 10, 0, 0, 0
i Adobe Systems Incorporated - Elements Organizer Version 10.0
ı i Adobe Systems Incorporated - ElementsAutoAnalyzer Version 10, 0, 0, 0
Adobe Reader and Acrobat Manager Version 1.5.7.0
i Adobe Reader Version 10.1.3.23
i Adobe Systems, Inc. - Shockwave Flash Version 11,3,300,270
ı i Adobe Updater Startup Utility Version 2.2.0.2 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)
ı i Adobe® Flash® Player Update Service Version 11,3,300,270
i Amazon MP3 Downloader Version 1.0.0.0
i Any Audio Converter Application Version 3, 3, 8, 1
i Any DVD Converter Application Version 4, 0, 1, 1
ı i Apple Inc. - QuickTime QuickTime 7.7.2 (1680.56)
ı i Apple Push
i Apple Software Update Version 2.1.3
ı i Belarc, Inc. - Advisor Version 8.2g
i Canon IJ Driver Uninstaller Version 1.2
i Canon IJ Utility Uninstaller Version 1, 3, 0, 0
ı i CANON INC. - CNSLMAIN.EXE Version 1, 4, 3, 0
i CANON INC. - MP Navigator EX Version 1, 0, 7, 0
i CyberLink - CLDownloader Version 2.3.0.2715
i CyberLink - DZM Version 2.05.3206
ı i CyberLink Corp. - PowerDirector Version 9.0.0.2930
ı i Google Chrome Version 21.0.1180.75
ı i Google Update Version 1.3.21.103
ı i GSpot Codec Information Appliance Version 2, 7, 0, 1
ı i Igor Pavlov - 7-Zip Version 9.20
ı i INR Desk Version 2.0.0.0
ı i Microsoft Corporation - Internet Explorer Version 9.00.8112.16421
ı i Microsoft Corporation - Windows Installer - Unicode Version 5.0.7600.16385
Microsoft Corporation - Windows® Search Version 7.00.7600.16385
ı i Microsoft Malware Protection Version 4.0.1526.0
i Microsoft Network Inspection System Version 4.0.1526.0
ı i Microsoft Security Client Version 4.0.1526.0
i Microsoft ® Windows Script Host Version 5.8.7600.16385
ı i Microsoft® .NET Framework Version 2.0.50727.4927
i Microsoft® .NET Framework Version 3.0.6920.5011
i Microsoft® .NET Framework Version 4.0.31106.0
ı i Microsoft® CoReXT Version 7.250.4232.0
ı i Microsoft® Windows® Operating System Version 12.0.7600.16385
i OpenOffice.org 3.4 Version 3.04.9590
i OpenOffice.org Base Version 3.04.9590
i OpenOffice.org Calc Version 3.04.9590
i OpenOffice.org Draw Version 3.04.9590
ı i OpenOffice.org Impress Version 3.04.9590
i OpenOffice.org Math Version 3.04.9590
i OpenOffice.org Writer Version 3.04.9590
i OpenOffice.org Writer(Web) Version 3.04.9590
ı i Orbitdownloader.com - Orbit Downloader Version 4, 1, 1, 1
i PlotSoft L.L.C. - PDFill PDF Editor with FREE PDF Writer and PDF Tools Version 9.0.0.9
i PlotSoft LLC - PDFill FREE PDF and Image Writer Version 9.0.0.9
ı i Realtek - ReStart Application Version 500, 1001, 719, 2007
ı i Realtek - RtlService Application Version 700, 1004, 1207, 2009
ı i RichVideo Module Version 2.0.1.5417
i Safer Networking Limited - Secure Shredder Version 1.9.0.0
i Safer Networking Limited - Spybot - Search & Destroy Version 1, 5, 2, 0
i Safer Networking Limited - Spybot - Search & Destroy Version 1, 6, 0, 30
i Safer Networking Limited - SpyBot-S&D Version 1, 6, 2, 0
ı i Safer Networking Ltd. - Spybot - Search & Destroy Version 1, 6, 0, 0
i SmartSound Sonicfire Pro Version 5.7.1
i Sun Microsystems, Inc. - Java(TM) Platform SE 6 Version 6.0.0.105
i The Audacity Team - Audacity® Version 1,3,13,0
Can anyone help me get this app going... please!!
Thanks in advance!
DNThis is frustrating! I just answered this post at length, but when I posted it it disappered!
Guess I have to start over and hope for the best!
Is that an HP laptop?
No, it is a desktop. However it is an HP 'hybrid' all-in-one, and uses a lot of laptop hardware and software to keep the low profile case.
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
I read this and it does not apply to my system.
Otherwise, unless I missed it, I do not see mention of your graphics/video card brand/model and driver number
This is why I asked how to upload the Belarc report! Too much info to post. Here is the Graphics info.
Name
NVIDIA GeForce Go 7600
PNP Device ID
PCI\VEN_10DE&DEV_0398&SUBSYS_2A40103C&REV_A1\4&1BC86A40&0&0020
Adapter Type
GeForce Go 7600, NVIDIA compatible
Adapter Description
NVIDIA GeForce Go 7600
Adapter RAM
256.00 MB (268,435,456 bytes)
Installed Drivers
nvd3dum,nvd3dumx.dll
Driver Version
7.15.10.9804
INF File
oem12.inf (nv_NV3x section)
Color Planes
Not Available
Color Table Entries
4294967296
Resolution
1440 x 900 x 59 hertz
Bits/Pixel
32
Display
Nvidia Flat Screen [Monitor] 19.25" vis
Driver
c:\windows\system32\drivers\nvlddmkm.sys (7.15.10.9804, 5.73 MB (6,006,696 bytes), 1/25/2007 6:43 PM)
Check the ATI or nVidia or ??? website to be sure you have a current driver
Another interesting story, that! Nvidia/GeForce does an auto detect and correctly identifies the graphics card, and sends me to a link to upgrade the driver. The driver page says it is for Vista x64 and Win7 x64 (even its long name has 'win7-x64' in it). I download and attempt an install, and it comes back with "you are running Windows 7 64-bit. This driver is for Vista only. Installer closing." I went back and tried 4 other Win-7 x64 drivers, all reported the same thing, even though they state on the site they are for Win7 x-64. I then went to the Device Manager and tried to update the driver, but it reported using 'the most current driver available'. So I uninstalled the current Nvidia driver, which put me into VGA mode. I then went to Windows Update and did a search for updates. It found a missing Nvidia driver and called it 'Nvidia Driver for Win7 x64'. I downoaded and installed it and my system returned to normal 1440 x 900 display. I checked the driver info and it is the same driver as the original, including the release date, so apparently the original driver was in fact x64 compatible, and there does not appear to be an updated driver for it.
Also, for laptops... if that is what you have
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modul es.html
-http://forums.adobe.com/thread/1001579
It is not a laptop, but as it uses many laptop softwares and hardware, I will check these and see if they help. I will post the results.
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
There are no DISPLAY options in my BIOS setup. There is also no update available for the BIOS from HP
Thanks for the help.
DN -
Adobe programs don't work on Win7 x64 with IE8 x32
I have been working for the last 2 hours trying to get adobe flash 10.1 downloaded and installed on Win7 x64 and IE8 x32. It downloads and crashes and never finishes the install, even though sometimes the adobe site tells me it's installed. when I access a website it asks to download the flash player each and every time.
Mind you I don't have a lot of time to troubleshoot and fix adobe issues. I have clients to take care of and if your not going to make your product easier to use then I will block all adobe flash sites from my clients computers. Needless to say this will make them angry at me but let me tell you I don't forgive. I will bash you each and every time a client calls me.I don't understand - in your post you mention "new Flash Player" several times, but in the subject you mention 10.2...?
What is the exact FP version you have?
For your blue box problem, have you tried to disable Hardware Acceleration? -
Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO
I have a brand new:
i5 4570
MSI Z87-G45 Gaming
250GB Samsung 840 EVO
1x 8GB Corsair ValueRam DDR3 1600
I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
Bios settings are okay, everything is recognized
USB Legacy - Kingston Datatraveler
HDD Legacy - Samsung 840 EVO
Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
What I've tried so far:
Switch out the SATA cables and power cables
Switch through the various SATA ports on the MB 1 through 6
Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
Update UEFI to V 1.50
All the above result in the case mentioned.
I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
What am I missing here, I would really want to install Win7 instead of Win8
Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
Any clues, tips, hunches??Quote from: Bernhard on 25-October-13, 18:33:41
Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
Hmmm not sure, thanks for the reply, will have to look into that later today!
I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
::EDIT::
Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued -
Hi,
My SD card reader is not able to write or delete and format sd cards.
WIN7 x64 Home Basic, 0x80070013 when I trying to write or delete files. When I trying to format I can see a message that disk is write protected.
The card is not locked, it's work in Lenovo Idea Pad s10 without any problem, It's also work in my Pentax camera.
I'm almost sure that the problem is software, but can't find solution.
Could Any one help me please?
Laptop is new, 8 days in use.I have network shutdown 2.0.1 installed and the pcns process normally would be abend in 1 or 2 minute's time. What could be the problem ? Consider to upgrade the network shutdown to 2.2.1 version. Could the problem be resolved in new version ? Any precaution needs to be taken when installing the new version ?
Terence. -
IPhone name not recognized by Win7 x64
Hi,
I have 2 iPhone 4, both are using one Apple universal docker to connect to PC, phone has its own name, and diaplay properly on PC wherever the device name is used, ie, under My Computer, Portable Devices. iPhone 4 are shown as A's iPhone or B's iPhone, as Digital Camera.
I encountered this issue after installed iTunes 10.5 or upgraded to iOS 5, I am not sure which one caused the problem. The issue is, B phone is no longer recognized as B by Win7 x64, while A phone has no problem at all, both are with iOS 5.
When I put B phone to docker or even connect to PC directly, it is always recognized as A, the device name is always A's name, but the content (camera photo etc) is still B's content.
When using iTunes, phone's name displays correctly.
I connected B phone to another USB port which is never used by iPhone before, Win7 detected and tried to download/install and finally, B phone is shown as Apple Portable Device, no Phone Name, not as Digital Camera as before. Again in iTunes, both phones are shown correctly with their own name.
Not a big issue but a little bit confused, how to correct device name here?
ThanksType "iphone not recognized by itunes" in the search box at the top of this page.
-
ITunes (Win7 x64) is no longer opening after the latest version update
iTunes (Win7 x64) is no longer opening after the latest version update - I have attempted an un/reinstall - can anyone offer other suggestions?
I am running Windows 7 64-bit, and am trying to reinstall the 64-bit iTunes from the iTunes website. I previously have had this working for the last few years with no major issues, the Apple Software Updater has been pestering me for some time so I finally got it to update. However now iTunes will not start, if I select the icons nothing happens. There are no iTunes applications running in the background in Task Manager either.
I look forward to your suggestions.
Thanks,
James.1. First check if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
2. If that fails, refer to following article to remove SC Files
http://support.apple.com/kb/TS2363
3. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REAPIR. -
Win7 x64 Installation on late 2007 MBP+Mountain Lion
Dear All,
As a long time mac and bootcamp user, I've never expected to face this problem but I've been trying to do this for 3 days.
I'm having trouble installing bootcamp (win7 x64 ultimate) into my late 2007 MBP (2.4GHZ core 2 duo)
Pretty much use the bootcamp assistant from start to finish, tried using install dvd and create boot-able USB stick (by changing the plist.info on the bootcamp assistant package, as my MBP isn't supported.)
With USB stick created by bootcamp assistant, my mbp just simply won't read it even during startup and rEFit startup.
Sometimes it goes into the blank state and says no bootable device.
With win7 install DVD, whenever I use built in superdrive, it got ejected after 2-3 mins,
When I tried using Samsung external dvd burner/player, in place of who-knows dead superdrive, it went into blank screen with only a dash blinking (just like when the first time you start a PC) then disc stop spinning after awhile.
Burned few copy DVDs from extracted ISO (from the orginial install disc) and came up with same results
Recent changes, current condition,etc:
- Changed the stock 160gb harddrive into WD500GB blue scorpio.
- Installed fresh OSX Mountain Lion downloaded from App Store (was Lion) and updated everything.
- Had the very same win7 on bootcamp 3 installed on snow leopard few years ago and keeping it even with Lion (the exact same dvd!)
- Superdrive cannot be used to write but can read normally (install DVD shows up normally in OSX environment.)
- With USB created by bootcamp assistant, rEFit shows "legacy booting" and can't find files inside the USB
- Installation is working flawlessly on my 2011 iMac.
- Can still boot into bootcamp on old internal stock hdd (using external case)
- DVDs burned are Verbatim DVD-R and Sony DVD-R, both are top brands.
- Burner I tried to burn them are 2011 iMac's, 2012 MBP's, Samsung external dvd burner (all fail to boot on my 2007 MBP)
- Tried the method to create usb stick on windows 7, still can't boot.
- Burned DVD using Nero and alcohol 120% on windows 7, still fail.
I wonder if you guys can help me, I'm a designer and I really need to install Corel Draw on bootcamp so I can work on some CDR files on my MBP. And other stuff such as office's finance control program that can only work under windows.
Thanks in advance!Found a workaround, to sum it up, it's pretty much my dead internal superdrive (as for unbootable USB, that's still a mistery). What I did was moving the HDD to my 2012 MBP and install from there. The problem is now that since I installed it on another machine (with ofc all different hardwares) I got blue screen whenever I tried to start Windows7 (in 2007 MBP after moving the HDD back there).
Next step will be replacing the superdrive on 2007 MBP with 2012's. Or if someone got a suggestion like installing the drivers via target disk mode etc, please advice -
Photoshop CS4 (64bit) & Win7 x64 problem fixed
I just wanted to post this to help anyone who might be having this problem.
Here's the problem. When you use Photoshop's lasso tool, you can press ALT at the same time, and it would turn into a magnetic lasso tool that you can use to make straight lines.
Well, what would happen is that I would be making a selection, and then suddenly the screen (both screens, as I'm using a dual screen setup) would flicker, and the selection would complete by itself, and I would be SOL, as, obviously, the selection is not what I wanted.
I could replicate this without fail. I'm halfway done with making a perfect selection, and bam!, this crap happens, and I have to start all over again. It happens ALL the time, no matter what Photoshop setting I used. Photoshop was completely updated, and all my device drivers (video card, mouse drivers, etc.) were all at their latest. So I started looking outside Photoshop, as I was thinking it might be another software problem.
After much trial and error, I narrowed it down to Task Manager. I had Task Manager running in my tray. If I closed Task Manager (not minimize, close), restarted Photoshop, and made my selection using the lasso tool, the issue would go away, but would come back randomly.
The fix? Run Photoshop CS4 in Vista compatibility mode. This solves the problem completely.
I know a lot of you will probably say that you have Photoshop CS4 running flawlessly on Win7 x64, but I have 3 computers, each with completely different configurations, one of them being a laptop, that I was able to replicate this on. Once I ran Photoshop in Vista compatibility mode on each computer, the problem was completely solved.
So I hope this helps anyone who has run into this problem.I confirm he is a blond wanna be.
function(){return A.apply(null,[this].concat($A(arguments)))}
Hudechrome wrote:
It won't work for me. I never used Vista.
(I will neither confirm or deny I am a blonde!)
Thanks for sharing. -
Premiere CS5 (win7 x64) won't recognize my Mini-DV camcorder.
I have Premiere Pro CS5 installed on a Windows 7 64-bit system.
When I try to Capture, I keep getting the error message: "Can't Activate Recorder. Try Resetting Camera."
the whole set-up worked fine on my XP system with Premiere Pro 1.5.
Extra info:
The Mini-DV camcorder is a Panasonic NV-DS33 (but personally I think it has nothing to do with my camera because I have seen so many threads online regarding this issue and no-one has any decent answer!)
the firewire cable is fine because it works on my old XP computer.
in premiere, if I change the camera to an HDV, then suddenly I can CONTROL the camera, but I can't capture)
Windows 7 (x64 bit) recognizes the Camcorder in the Device Manager (and says it is working properly).
I have tried several other DV capturing softwares (Stoik, Scenalyzer, WinDv). I have even tried my old Premiere Pro 1.5 on my 64-bit system.. and NONE OF IT WILL CAPTURE MY CAMCORDER!
This is very frustrating. I need my new win7 (x64) Premiere CS5 to capture successfully. I have spent a LOT of money on this new system. What on earth is the problem?
(i saw one thread on a similar issue regarding a 32-bit installation of Win 7, and it is marked as ANSWERED! but in my opinion, (from the amount of forums on many other sites) this issue is definitely not fixed.
is there any update to Premiere CS5? or a workaround? or anything else I should know?
PS: it is not an option for me to keep using my old computer to Capture video and then transfer it to my new system. i am passing my old system on to another person.
many thanks
Marc
[email protected]I agree that the "Legacy" FW driver solution should be a stickie, or FAQ. Since Win7-64 was released, it has caused no end to the grief. Maybe Jeff, or Todd will have a better solution to getting the word out.
It was Harm Millaard, who brought that to MY attention, and he's posted it to many, many threads. In nearly every case, it's solved the issue.
Good luck, and thanks for reporting Colin's success,
Hunt
PS - per your suggestion, I just published this "fix" in the Tips & Tricks sub-forum for PrElements. -
32-bit ODAC 11.2.0.2.1 Installed on Win7 X64 with Oracle 11gR2 x64
I have Visual Studio 2010 x64 installed on a Win7 x64 Enterprise system, along with Oracle Express Edition 11gR2 x64. I downloaded and installed 32-bit ODAC 11.2.0.2.1 so I could use Oracle databases with Visual Studio, along with SQL Server.
When I tried to run InstallAllOracleASPNETProviders.sql in SqlExplorer, I got an error
D:\app\PaulK\product\11.2.0\client_1\ocijdbc11.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform. Vendor code 0.
Everything was working fine before I installed ODAC 11.2.0.2.1.
I've seen references to a beta x64 version of ODAC. Where do I find it? Do I have to uninstall the 32-bit ODAC first? Will uninstalling the 32-bit ODAC fix SqlExplorer?
Thanks.PaulK wrote:
I have Visual Studio 2010 x64 installed on a Win7 x64 Enterprise system, along with Oracle Express Edition 11gR2 x64. Not sure I follow. Neither VS 2010 or XE 11.2 exists in a 64-bit release. What precisely do you have installed?
I downloaded and installed 32-bit ODAC 11.2.0.2.1 so I could use Oracle databases with Visual Studio, along with SQL Server.Since VS is a 32-bit app (though it can run on 64-bit OS and produce 64-bit binaries), it needs 32-bit libraries, yes.
Is MS SQL Server instance a 32-bit or a 64-bit install? Perhaps both 32-bit and 64-bit clients are needed for planned setup.
D:\app\PaulK\product\11.2.0\client_1\ocijdbc11.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform. Vendor code 0.It seems you are running SQL Developer on a 64-bit java machine. The 64-bit jvm obviously can't load a 32-bit dll, which I'm guessing was found via the 32-bit ODAC's PATH entry. Entry was listed first since Client/ODAC was installed last. Did you use Connection type TNS in SQL Developer? (Or Use OCI/Thick driver ticked in the database / advanced options, in Preferences.)
What's the version of SQL Developer?
Everything was working fine before I installed ODAC 11.2.0.2.1.If I'm correct in various assumptions, you have to cater for different environments/requirements.
E.g to run SQL Developer with correct set of libs.
set PATH=<path to libraries for sql developer/jvm>;<remaining PATH stuff>
x:\some\path\here\sqldeveloper.exe
Another way could be to use Instant Client and drop required lib files (.dll) in proper location within SQL Developer home. (So that it will find proper dlls directly in "cwd" instead of searching via PATH.)
I've seen references to a beta x64 version of ODAC. Where do I find it? There are both production and beta releases.
64-bit ODAC home page:
http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
Edited by: orafad on Dec 3, 2011 10:20 PM
Edited by: orafad on Dec 4, 2011 1:31 AM -
MDT 2012 Win7 x64 capture fails - boot loop
Hi everyone,
I'm pretty new to MDT and having a problem capturing a Win7 x64 reference image.
It seems to start out fine doing the Sysprep and so on, but then it has to restart the computer and after that it goes into a boot loop. After this, I have been forced to format and reinstall Win7 on the computer. This picture shows what it loops through
in about 20 seconds - and it shows nothing else than what's on these pictures :)
www.jaded.dk/boot_loop.png
I have been Google'ing alot, but can't find any post with the same issue, since most other get an error msg which I dont.
Here is some info about the setup.
I'm deploying the task sequence locally using these commands:
net use * \\mdtserver\DeploymentShare$ /user:domain\username
cscript \\mdtserver\DeploymentShare$\Scripts\LiteTouch.wsf
Server running MDT 2012 U1 - Win server 2008 R2, 64 bit
The laptop on which i'm trying to capture the ref img is a HP Elitebook 8470p. It is fully patched with windows updates and I have installed a few apps like Office 2010, flash player, reader etc.
The "Rules" on my MDT Workbench is like this:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
SkipProductKey=YES
SkipComputerBackup=YES
SkipBitLocker=YES
SkipTimeZone=YES
SkipLocaleSelection=YES
InputLocale=0406:00000406
KeyboardLocale=0406:00000406
KeyboardLocalePE=0406:00000406
SystemLocale=0406:00000406
UILanguage=0406
UserLocale=0406:00000406
My task sequence looks like this:
www.jaded.dk/task_seq.png
I don't know where to find a log of the capture, to get a hint of what has gone wrong.
Hope you can help me out here :) And please let me know if you need more info.
Thanks
MortenThank you both for answering.
ccatlett_sogeti:
I didn't seem to have Windows Deployment Services installed on my server. I just installed it and added WinPE boot files as bootimage according to this guide: http://blogs.technet.com/b/manojnair/archive/2011/11/23/exploring-mdt-2012-beta-2-part-6-of-10-integrating-mdt-2012-beta-2-with-windows-deployment-services-wds.aspx
Is that correct?
Keep in mind that I don't use PXE at the moment, if that makes any difference :)
David:
I will try to add SLShareDynamicLogging. I set it like this - hope it's correct:
SLShareDynamicLogging =\\MDTSERVER\DeploymentShare$\Logs\%ComputerName%
Maybe you are looking for
-
NAS! Is it possible to store files and catalog on a lokal NAS.
I would like to be able work on both my desktop and my laptop.
-
How to improve on insert-select query performance
Hi, Would like to get some opinion on how to improve this query inside my stored proc. This insert stmt has run more than 4 hours for inserting around 62k records. I have identified the bottleneck is in the function within the select stmt. Could anyo
-
Where can i download version 3.6.x?
I need to submit a FAFSA with the Version 3.6.x!! Where can I go to, to download to my laptop? I have Windows Vista. Please Help!!!
-
5d Mark III support when?
I'm fully aware that this is just a release candidate but that should be close to perfect.. I also fully understand the issue with being first off the line and get the latest camera. But this is the second release of CR that doesn't support the 5DIII
-
Override hashCode() method
hi, I'm writing a very simple hashCode() function (3different way), which uses 2 string to calculate the hashCode, it looks somethings like this: 1)... public int hashCode() { str1 = "abc"; //Can be replaced by any string str2 = "cde"; //Can be repla