PS doesn't recognize arial narrow bold & arial narrow italic fonts

hey all. at the end of my wick here.
i have photoshop 7.0 on a windows xp machine. trying to work with a psd file that uses arial narrow bold and arial narrow italic fonts. when i dragged the file into photoshop, it told me those fonts weren't available. downloaded arialnb.ttf and arialni.ttf from the internet, went into my control panel - fonts folder and deleted the old ones that weren't being recognized and installed the new ones. they are still not recognized. microsoft word doesn't recognize them either. please advise.
i appreciate any and all help that anyone can swing my way. thank you.

Does this help:
http://indesignsecrets.com/hotfix-corrects-arial-narrow-problem-on-windows.php
Bob

Similar Messages

  • Error Message. IE doesn't recognize webkit font, converts to arial

    MuseJSAssert: Error calling selector function:TypeError: 'undefined' is not a function (evaluating 'PIE.attach(this)')
    I get this error in IE only. Also, IE doesn't recognize my font and converts everything to Arial, so it's all bigger and bolder and it doesn't fit how I want it to.
    I'd like to know what this error means and also how I can get IE to recognize the WebKit font that I have used.
    procleansupply.net

    Hi ChoreoGraphics,
    Search and ye shall find [see link below]
    Newsgroups in Safari or Mail?
    Hope that helps.

  • Arial Unicode MS font doesn't appear in PhotoShop CS5 for MAC

    Hello,  I'm having a problem with Arial Unicode MS font in MAC. The other apps such as TextEdit, Pixelmator... can see the font but not PhotoShop CS5 and the other apps in the CS5 suite (Flash, Illustrator...)
    Does anyone have the same problem with me? Could you help me to solve this problem?
    Thanks in advance,
    Chinh Do

    Check the entire font menu, all the way to the bottom.  The font may not be in the alphabetical order you expect, but towards the end of the list, among the Asian fonts or so.
    Wo Tai Lao Le
    我太老了         

  • Photoshop CS6 doesn't recognize my Fuji XT-1 HD Movie File

    Hi all,
    Can anyone give me a hand with this? I keep getting an error message telling me that PSCS6 doesn't recognize this  FFDB.DAT file. I'm super confused because I thought all movies were supposed to show up as .mov. Can anyone help? I'd like to get this figured out asap.
    Thanks so much,
    Stacey
    Message was edited by: Stacey Lewis
    Update: I formatted my SD card and now I see my .mov file and can navigate to it fine. NOW, the issue is that Photoshop just tells me the file can't be opened but I can view it in QuickTime just fine. Does this narrow it down and can someone give me a fix for this? This is a trial version of PSCS6 I'm using.

    Okay, I figured it out...duh.
    My bad...or rather, Nvidia's bad!
    In their app profiler, they set Photoshop to use the "default" settings, which defaults to the integrated graphics.  By changing the profile to make it use the discreet graphics, it worked!
    This also fixed my issue of the background flashing / flickering.
    I know that's a known bug with Windows 8 + AMD (http://helpx.adobe.com/photoshop/kb/image-background-transparent-or-flickers.html)
    However, Adobe should look into this same bug occuring with the Intel HD4000 integrated GPU, because this happened with my laptop.
    Maybe that bug doesn't occur on systems that only have an integrated GPU, but on systems with Optimus, it's definitely a reproducible issue.
    When I switch back to integrated, the issue pops up again.
    It's nice that Nvidia provides an option for us to either use the integrated or discreet graphics, however, Adobe needs to follow through and make sure that Photoshop doesn't wig out when we're using the integrated GPU.  Sometimes, your customers need to do work on battery power, so the integrated flickering /flashing /transparent background bug definitely needs to be fixed.
    Personally, I can get 6hrs out of this laptop running the integrated GPU, but when I use the discreet, that cuts it down to only 2hrs.

  • Font Mapping issue with Arial Unicode MS font

    Hi All,
    I was able to do font mapping for Arial Unicode MS font (.ttf) in BIP version 10.1.3.4.
    But after applying the patch 10256764 I am not able to see the Arial Unicode MS font in the Font Selection drop down box in BIP .
    I have copied some other .ttf fonts to the .\ jre\lib\fonts folder and they are appearing in the BIP
    Does BIP patch 10256764 not support Arial Unicode MS font ?
    Please help me...
    its resolved .Font name extention should be in lower case (.ttf)
    Edited by: deepz on May 5, 2011 10:15 PM

    There is no BOLD font TTF files for Arial Unicode MS.  No resolution at this point of time. Closing the issue.
    Edited by: vamsee m on Apr 27, 2011 9:29 AM
    Closing this issue

  • IPhone 4 frozen with screen image of usb connector with arrow to iTunes logo.  iTunes doesn't recognize my iPhone message says in recovery mode must restore.  Try to restore and get - 1 error.  What do I do now??

    iPhone 4 frozen with screen image of usb connector with arrow to iTunes logo.  iTunes doesn't recognize my iPhone message says in recovery mode must restore.  Try to restore and get - 1 error.  What do I do now??

    Hi there beee19,
    You may find the troubleshooting steps in the article below helpful.
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    -Griff W. 

  • Itunes 10.6 doesn't recognize my iphone 4s 32gb, could you please help me?

    I bought an iPhone 4s 32gb from Singapore. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone.  I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?.  iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
    I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    System manufacturer System Product Name
    iTunes 10.6.1.7
    QuickTime not available
    FairPlay 1.14.37
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.1.1.4
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0013AC2C0E8DEF50
    Current user is an administrator.
    The current local date and time is 2012-06-12 20:13:12.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel(R) G41 Express Chipset
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
    Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.3
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Tue Jun 12 19:48:36 2012
    Lease Expires:       Wed Jun 13 07:48:36 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    iTunes has never successfully accessed the iTunes Store.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    G: Optiarc DVD RW AD-7220A, Rev 1.01
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.1.7 is currently running.
    iTunesHelper 10.6.1.7 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    Well, you do not mention what computer OS you are using, so here are the support documents for both.
    Windows:     http://support.apple.com/kb/TS1538
    OS X:     http://support.apple.com/kb/TS1591

  • ITunes doesn't recognize either of my iPods

    I downloaded the latest update recently and since then iTunes doesn't recognize either of my two iPod touches (4th gen), even though the computer does. My iPad (1st gen) is still recognized normally. I tried uninstalling iTunes and reinstalling it several times, and that didn't work. The iPods are recognized by iTunes on other computers. The computer in question runs windows 8.1, if that makes a difference. From the look of these forums it looks like I'm not the only one who has this problem. Please help.

    Hi Tanskalinen,
    If you are having issues with iTunes not recognizing some of your devices on your Windows machine, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

  • After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?

    After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?
    THis also happened with my old iphone 4s
    I need help!

    Hi loist,
    Thanks for visiting Apple Support Communities.
    If your iPhone is not being recognized by your computer after you click "Trust," the troubleshooting steps found here can help:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jeremy

  • Tecra M4 - DVD drive doesn't recognize any disk under Vista

    Hi,
    after the installation of Vista my dvd drive doesn't recognize any disks !
    No upgrade from XP! It was a clean Vista installation.
    I found several links about the registry entries upper and lower filter this entries doesn't exist in my registry under the class CDROM.
    I tested the drive under XP it works fine and recognizes everything.
    Drivers are correctly installed no problems in the device manager is prompted.
    So i have no idea how to get it working, seems to be a Vista problem
    Could any one help me ? I'm really frustrated about this
    Thanks for your help

    Maybe this helps:
    - Remove the CD/DVD drive from the device manager.
    - Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    - Then reboot the notebook
    But what happens exactly? What disks are not recognized?

  • How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

    How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

    Ask the headset manufacturer.
    Barry

  • This Question is at least 2.5 years old.  But still an issue.  I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7.  Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

    I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7.  Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

    iTunes does not use the .xml it uses the .itl
    If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

  • I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...

    I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...
    HELP HELP

    To confirm, your existing mail client isn't communicating with your existing and remote mail services at Dreamhost? Which mail client are you using (Apple mail?), and how is mail on the client set up?
    It would initially seem that your client is still referencing the server, either for its inbound or outbound mail. (And I'm not sure how unplugging the server helps here, unless there's some sort of a configuration issue, or a duplicate network address or such.) This would usually be something within the configuration of the mail client.
    The Mac OS X Server is significantly easier than the many other servers and server operating systems I've dealt with over the years, but it requires reading the manuals and/or some knowledge of networking and of server environments.
    Small shops and home folks without the time or inclination to "spin up" on these server areas can be well-served with some help initially configuring the server. Servers are different from clients. Stuff that you're implicitly used to using when you're running a client -- the DHCP server, for instance -- are what the servers provide you with.
    As for Mac OS X Server and particularly if you head outside of the default settings and sequences and off into the customizations, which is what has happened here, you might want to engage some assistance. Not just for the direct and obvious initial set-up sequence, but also for getting you set-up and started with backups and other such tasks. Before you get too deep in here and get too much underway and too much saved on your disks, do seriously consider getting somebody in to help set this box up for you.
    Mac OS X Server is not "no IT", but it is rather closer to "less IT" than most. Particularly once you get it configured and running.

Maybe you are looking for

  • Maximum number of files in a folder ?

    Hello, what is the maximum number of files in a folder OS X can handle ? I used a file recovery software called FileSalvage to save some files of an external 300GB with a corrupted disk directory (unable to repair with the usual repair/recovery progr

  • 16x9 on a TV

    Anybody got the Intel Mac Mini to do a 16x9 PAL image. I am connection via s-video to a 16x9 TV but can only get a 4x3 image. According to the producer of Switchresx he has the same problem and thinks it's a limtation in the video card in the Mac. Wa

  • TheVolumeSettings Folder: How to make it disappear

    Hi, I was transferring a large folder from my computer hard drive to an external when I noticed this folder pop up on the external hard drive. When I click on it, it disappears, but I can't seem to delete it. Can anyone explain to me 1) What the Volu

  • Problem with ComboBoxRenderer

    Hi all. I try to paint my combo box in different color when there is no selected value. So, I created custom renderer, and tried to setup background & foreground like this: ----------%<-----------      public Component getListCellRendererComponent(  

  • When i buy music or apps they dissapear before download

    I've been trying to download both music and apps, when I do they proceed to download but then just dissapear. The card details are all alright so I really don't know why this is happening If anyone knows please help Thanks!