Ps edited images not visible under keywords or in collections

Images I edit in PS no longer show up back in the catalog with the orignal under keyword or in a collection.   I can find them when I go back to the orginal folder by the date the original was shot, but I don't work from the folders because that's not how my projects are organized, so they end up being pretty much invisible to me.   when I locate them in the folders, the ps edited image has the same keywords as the original and is in the collection I was working on, but I can't view it when I choose that keywork or the collection.   It shows there is a second image but won't allow you to see it, unless you go to folders.   Is this something in a new version of lightroom, because my ps edited images have always been visible before, next to the orginal within a catalog or by a keyword.   Is there something different you need to do for that to happen now?

By George, that did it! I had regenerated previews, but I missed the main issue.
Why would thumbnails disappear like that?
Thanks for your help.
Steve

Similar Messages

  • Likely bug with external editing (in CS5 not CS6 beta) and edited image not showing back up in LR

    I have come across something strange today that I've not seen before. I'm running LR 4.0 under Win7 64-bit. I usually use Photoshop CS6 beta as my external editor, but invoke CS5 when I have to use some tools that don't support the beta. Here is the scenario:
    * I have CS5 open
    * I externally edit an image in CS5 and Save it from CS5 when I'm done
    * The edited image does not show up in LR
    * I close LR and reopen it
    * There is the edited image!
    I have duplicated this many times this evening. I don't think I've seen it when I've used CS6 beta.

    Something strange is going on because I had the behavior reported of edited image not showing up after using another filter, Nik Silver Efex Pro 2.

  • My Custom repositories are not visible under content tab of ACC

    Hi,
    My Custom repositories are not visible under content tab of ACC ,eventhough i had appended my custom repository in /atg/registry/ContentRepositories.properties to the property
    initialRepositories+=/myCustomRepository.PLEASE HELP ME.

    Kindly make sure,
    initialRepositories+=/com/training/club/tools/myCustomRepository
    I assume you have config/com/training/club/tools/myCustomRepository.properties component. /com/training/club/tools/ is your path of component from config.
    -RMisihra

  • HFS+ formated USB Disk not visible under Windows 7

    Hello.
    I recently purchased an APE and hooked a 4TB HFS+ drive via USB on it. Unfortunately it's not visible under Windows7. Though if I use a Fat32 formatted drive i'm able to access it. I even have macdrive installed. The drive is working properly if connected to the PC or MAC manually.
    Please help

    Hello exalderan. Welcome to the Apple Discussions!
    FWIW. I currently have an external USB drive (NewerTech miniStack) connected to my 802.11n AirPort Extreme Base Station (AEBSn). I can access it from Windows 7 (Ultimate) from either a dedicated Windows PC or from a Parallels VM running Windows 7 without any issues. The 2 TB drive is formatted in HFS+.
    What type of errors are you getting?

  • SP 2010 Publishing - Rollup and Page Images not visible when entering page edit mode

    All:
    Hello, I have an odd issue recently appearing after installation of FEB 2013 CU install. When users select to Edit a Publishing Page the Rollup Image and also Page Image(Article Page Layout) are not visible. Only the "Click here to insert Image from
    SharePoint" link is visible.
    The issue has be confirmed in 5 servers across two farms
    DEV, QA, and PROD on client recently updated
    DEV and PROD in a completely separate client farm
    I have confirmed the issue does not exist in two separate farms running April 2012 CU. In both of those environments the image appears with issue even in Edit page mode.
    In the farms where the issue exists you can click the insert image link and simply hit OK to see the image again. An easy enough work around for tech savvy but my client's content admins are very confused/frustrated by.
    Is this a bug? I have confirmed in two separate farms including brand new web applications using out of the box publishing site templates.

    Hi.
    We have been facing the same issue in a 2013-environment (SP1), but in this case an upgraded 2010 Solution, which still runs in 2010-mode. Because of this, SharePoint still use resource-files in the 14-hive (as we have not performed an upgrade of Master
    Pages etc.) The problem is also reproduced on a clean 2010 Site Collection in the same 2013-environment.
    I have managed to find the cause of the problem (at least in our environment), and that is that as long as the selected picture/image has
    not defined an "AltText"/"Alternate Text" the problem seems to occur.
    In other words, try to define an Alternate Text and click OK in the "Edit Image Properties" Dialog.
    I don't know if this may be the case for everyone else, but give it a try.
    From this, I've further discovered (after hours of js-debugging) that there is a minor change (from 2010 to 2013) in a js-file called "SelectorControls.js" which is responsible for updating the various controls used in Page Layouts etc.
    The problem exist in a method called ASO_UpdateButtonsAndPanels(), which checks whether the Image Control in question has content or not (Url). The local variable "hasContent" is then determined of an if statement, if(this.AssetData.ManageLinkDisplayText)
    which in 2010 (14-hive) seems to be "true" regardless whether the Control is of type Image or Hyperlink. Further the code checks for AssetText (Alternate Text) which on an Image may be left empty.
    In 2013 (15-hive) however, this if statement has been changed to, if(this.SelectorType==ConstLinkSelectorType), which clearly states "Image" or "Link" depending on the type of control.
    I don't know if this is the cause of the problem in 2013, but in 2010 it seems to be exactly that.
    Pending a solution from Microsoft, we have modified SelectorControls.js to overcome this issue until the customer decides to do a Visual Upgrade to 2013.
    This is by all means not a supported nor a a permanent solution to the problem, as future Hotfixes, Service Pack etc. may "reset" our fix.
    Below is a copy of the working solution:
    function ASO_UpdateButtonsAndPanels()
    {ULSuBa:;
    var hasContent=!!this.AssetData.AssetUrl;
    //SharePoint 2010: ManageLinkDisplayText is always "True"
    //var hasContent=!!this.AssetData.AssetUrl;
    //if(this.AssetData.ManageLinkDisplayText)
    //hasContent=hasContent && !!this.AssetData.AssetText;
    //SharePoint 2013
    //var a=!!this.AssetData.AssetUrl;
    //if(this.SelectorType==ConstLinkSelectorType) a = a && !!this.AssetData.AssetText;
    //Fix for preventing existing selected image to disappear when saving page and/or editing a page with existing image.
    if(this.SelectorType!=ConstImageSelectorType)
    if(this.AssetData.ManageLinkDisplayText)
    hasContent=hasContent && !!this.AssetData.AssetText;
    if( hasContent )
    if (this.ClearAssetButton !=null)
    this.ClearAssetButton.EnableButton();
    this.GetAssetSelectedPanel().style.display="inline";
    this.GetEmptyPanel().style.display="none";
    else
    if (this.ClearAssetButton !=null)
    this.ClearAssetButton.DisableButton();
    this.GetAssetSelectedPanel().style.display="none";
    this.GetEmptyPanel().style.display="inline";
    I hope this helps anyone else struggling with the same problem.
    Thanks!
    Øyvind

  • Images Not Visible but Loading within Spry

    I've built out a site using Spry numerous times and never had
    any problems. But the below site I'm having issues with in that it
    works fine in Safari but the images load within the Spry region set
    (div id="mainContent") but are not visible. The images are
    definately there as they can be viewed in a seperate window or
    downloaded to the desktop.
    w/w/w/./sl/im/press/./com (ignore / for domain name)
    I've tried commenting out various elements in the css and
    html and nothing seems to remedy this problem. Any help would be
    super appreciated as I'm super stuck on this! The images don't load
    in Firefox or Explorer. Thanks!

    Hi bkerkay,
    first try a rebuild of the library.
    Try this:
    Before doing a rebuild make sure iPhoto's trash bin is emptied. You can do this by control clicking on the trash bin, or from the menu bar under iPhoto.
    Close iPhoto
    Duplicate the iPhoto Library folder
    Drag the duplicate to the desktop (hopefully you have enough room on your hard drive for the duplicate.)
    Launch iPhoto holding down the Command and Option keys until you see the rebuild options screen.
    Choose the first three options. If you were missing photos in your library, also choose the last option. Be advised that you will get a roll of orphaned photos and it might be quite huge. Most of them will already be in your iPhoto library, but use caution when deleting anything from this roll until you are sure the photos are still in your library in another place. It might be a good idea to share/export this roll of photos just in case you need to import them again.
    Back to the rebuild, depending on the size of your library it might take some time. When it is done, hopefully your photos will be there.
    You might see some unexpected results as I did when I did a rebuild. Photos had been moved to wrong dates, video clips had lost their duration info and some were even orphaned from the jpg pointer file. It took me some time to straighten it out again.
    This is the reason to make a duplicate before you rebuild, in case you do not like the result. If you don't like the result, close iPhoto, then delete the rebuilt library and drag the duplicate back into the Pictures folder making sure the name is iPhoto Library. Launch iPhoto and it should open the library in the Pictures folder.
    iPhoto 4 or later: Rebuilding the iPhoto Library
    Get back with results.
    Lori

  • Folder Structure Not Visible under Content Administration

    Hi all,
    We have EP 6.0 SP13.The Folder structure(Both Business objects and Portal Content) under Content Administration and Folder structure under System Administration is not visible.I have logged in as Administrator and the roles assigned were:
    com.sap.pct.crm.crm_default_services
    Administrator
    ContentManager
    eu_role
    super_admin_role
    When i'm trying to access the portal content,<b>Loading...</b>is dispalyed in Content Area for a while and a message <b>'error occured'</b> is displayed in the status bar instead of <b>'Done'</b>.
    I'm also having a problem in Detailed Navigation.Nothing is visible under Detailed Navigation.
    Any Inputs on the above issues would be of great Help.
    Thanks and regards,
    Vijaya Sai.V

    Hi,
    There could be only 2 problems when PCD objects are not being shown.
    1) You don't have the permission to view it. But since you are an administrator, you don't have to worry about it.
    2) The browser is unable to show the PCD objects.
    Now lets look at the solution:
    I had faced the same issues where when I tried to access the portal using IP address, PCD objects will not show. So the solution is to access the portal through its "name" rather than the IP address.
    I guess you would have tried to access the portal by its name, then you had faced an error in browser and so you are trying to access the portal by IP address.
    if this is true, make an entry in the hosts file in your local machine, mapping the IP address to the domain name.
    If you dont know how to do it, please follow the following:
    Goto the following folder in windows
    C:\WINDOWS\system32\drivers\etc\
    You will find a file named hosts. Open it in notepad and give the IP address & domain name of the portal in the format specified there. Save the file. Now if you access the portal using its domain name, you should be able to see the PCD. If you are still not getting it, restart the machine and try once more. It should work.
    If you are using a Linux system, the file can be found under the \etc under the root folder.
    Regards,
    Vijai.
    Message was edited by:
            Vijai Mohan

  • Can I use iPhoto to view and edit images not stored in the iPhoto Library

    Hi folks,
    I'm a newbie to Mac after 20+ years on PC...just switched 2 weeks ago....wish I'd done it years ago. Everythings so easy and fast...e.g. setup wireless broadband in 25 mins with no probs....and I have never done anything like that.
    Here's my Q.
    I have a load of images, downloads and scans, of old manuscripts, authors etc. which I don't really want in my iPhoto library (which I would like to keep for actual photos. Is it possible to point iPhoto to another location (say in Documents) where it will let me view and edit these images without importing them into the library.
    Alternatively can I view images as thumbnails in this other locations, and not as default file type icons.
    Hope this is plain,
    JP_MAC
    Imac G5 17" 1.9Ghz   Mac OS X (10.4.3)  

    Hi jp-mac,
    iPhoto 5 imports all images into it's own database. (this has changed with iPhoto 6 so you might want to check out iLife 6)
    The other files you want to view but not have in the library...are they image files?
    If so, you can view that folder as icons and then make the icons larger so you can see what they are.
    To do this open the folder in question. click the first icon on top of View in the toolbar. This will make that folder contents view as icons
    Now go all the way to the top of your screen and click on View>show view options.
    Slide the icon size slider all the way to the right to view them larger. Also make sure you have the "show icon preview" checked.
    This will work most of the time, but sometimes if you edit images in other applications they might not make icon previews, so check their preferences to make sure you have that checked.
    There is also a little third party program that will do it for you.
    One is called Pic2Icon
    Pic2Icon
    Another one is a contextual menu item called QuickImageCM.
    QuickImageCM
    check out that page because there are some other useful contextual menu items that I use all the time.

  • Mac OS 9 AFP file sharing volume not visible under Mac OS 10.5

    An old blue-white PowerMac G3 running Mac OS 9.2.2 with file sharing on is not visible on the network for a MacBook Pro running Mac OS X 10.5.5. – However, a PowerBook G4 with Mac OS X 10.4.11 perfectly shows the G3.
    Connecting to the G3 works on the new MacBook Pro with OS X 10.5 if I use the server's IP-address (afp://xxx.xxx.xxx.xxx) but does not work if I use the server's name (afp://<servername>).
    All other shares on the network are visible for both the MacBook Pro running OS X 10.5 and the PowerBook G4 running OS X 10.4.
    Why does the MacBook Pro with Mac OS X 10.5.5 not show the G3?
    Why can't I connect to the G3 using its AFP name?

    I think this is because there is no AppleTalk on Leopard.
    Ah, I stand corrected........
    Go to SystemPreferences > Network
    Select your connection in the left column. Advanced > AppleTalk
    Enable AppleTalk for your connection.
    sp
    Message was edited by: brainslice

  • Work items are not visible under UWL in portal ?

    Hi,
    We are upgrading from SRM 5.0 to SRM 7.0.
    We have observed one issue here. Workitems are not visible in UWL in portal.
    But workitems are available in SAP inbox. i.e SBWP.
    Completed items we can see in UWL.
    Could you please let me know any idea on this.
    Regards
    Venkatesh P
    Edited by: Venkatesh Padarti on Dec 9, 2010 8:28 AM
    Edited by: Venkatesh Padarti on Dec 9, 2010 8:29 AM

    Hi Venkatesh,
    Can you please share the solution? Which base URL was wrong and where did you correct that?
    Your help is really appreciated.
    I had post the same question at SRM workflow - work Item is not being displayed If you want to reply there. I will definitely, reward with points too.
    Thanks,
    Bhavik

  • Edited images not showing up in iphoto

    when I edit images in photoshop elements and save them they do not show up in iphoto. I am saving them as tiffs.

    I am saving them as tiffs.
    But what were they?
    If there is a format change - from jpeg to tiff, from Raw to something else - then you need to save the files to the desktop first and then import them as new files.
    Regards
    TD

  • Edit pane not visible in portfolio

    Hi-
    I am new to Adobe 9.  When I am trying to create a new PDF Portfolio, the edit pane is not visible on the right hand side (so that I can set colors, headers, footers, etc.).
    I have searched through the documentation and can find no reference of how to make this pane visible.
    What am I missing?
    Thanks.

    I understand that - I am referring to the Adobe Portfolio in Acrobat - where you can create a single pdf with multiple pdfs, flash, audio, video, Excel spreadsheets, Word documents, etc.
    The documentation (and other training resources) clearly show an 'edit panel' on the right side of the Portfolio creation window when a new portfolio is initiated.  Mine does not show this pane and I can't figure out how to make it appear.
    See the attached screen shot of what I am pulling from the documentation.  The capture picture is what I am pulling from the documentation.  You will see on the right hand side of this screen it says 'Edit Portfolio'.  That is the pane I am missing, as you can see from the screen shot of my window, in Capture2.
    Thanks for any assistance.

  • VST edit screen not visible after a certain number in a session

    Hi folks, I have a small strange problem. After I add a certain number of VSTs to a project, I can't see the GUI of the VST anymore. It's there, and working, but I can't edit any parameters because I can't see them anymore. Anyone with this problem and why it happens?
    It seems to be worst with new Waves plugins (I have Gold bundle) but it's general with any VST. Strangely, it doesn't happen with DirectX plugins at all.
    Lenovo laptop, i5, using firepod.

    The main screen is scrollable. The sub screen does not need to be. The box frame has been expanded to allow space for the new objects and the entire new space is visable. Only the objects located in the lower portion of the box are not visible.

  • Fill Image not visible with iOS (ipad/iphone)

    Hi
    I created a website with Adobe Muse and I have an issue when surfing with ipad or iphone.
    When you have a coloured rectangle and add a fill image to it, it's perfectly visible with any type of browser on a desktop pc.
    Yet, when using iOS7 the image is not shown, I only see the coloured rectangle.
    This issue only concurs when I use parallax layers. The moment I add a movement to the image, it's not visible on ipad.
    What I exactly do:
    image fill: adapt to fill (in dutch: aanpassen aan vulling) and centered
    movement: start movement up and right both on 0. after movement: up and right both on 0. This way I can create a parallax effect.
    You can look at the example: http://balratmort.businesscatalyst.com
    There are 4 image's not shown.
    Strange thing: the first image with the brazilian flag has the same settings as the others, and the image is visible!
    Could someone please help me in this?

    I found the solution/error!
    my main position in the movement tab was set to 0px.
    So the movement starts when i'm at the top of the page.
    when i reach the image it's already scrolled out of focus.
    I need to set this to the pixel where my rectangle starts, not 0px.
    and that's why the first image with the brazil flag, worked correctly!
    I hope it's clear, since my muse is dutch, not english.

  • Images not visible in Web Dynpro

    Hi All,
    I am trying to show pictures from KM in a Web Dynpro for Java application but I have some issues with some pictures created and modified in Macintosh.
    Pictures/images created in Adobe Photoshop CS2 Macintoch are not visible.
    Any idea?
    Regards,
    Ridouan

    Hi Armin,
    The format is 240 by 340 px, the size is 85kb.
    The browser is displaying the images correctly and I can't open the images with MS Paint.
    I am using Windows viewer to view these images.
    The URL is correct as I have other images (not created in Macintoch) and Web Dynpro is displaying these images just fine. The size is here 10KB.
    If I place a link to the image then it will be displayed but not with the KM code.
    wdContext.currentContextElement().setImage("/irj/go/km/docs/documents/Telefoongids/"  + klaccount + ".jpg");
    IPublicTelGidController.IDetailsElement details = wdContext.currentDetailsElement();
              String klaccount = wdContext.currentDetailsElement().getKlaccount();
              String foto_ok = wdContext.currentDetailsElement().getFoto_Ok();
              String manager = wdContext.currentDetailsElement().getManager();
              if (foto_ok.equals("X") && manager.equals("X")){
                   IWDClientUser wdClientUser = WDClientUser.getCurrentUser();
                   IUser sapUser = wdClientUser.getSAPUser();
                   com.sapportals.portal.security.usermanagement.IUser ep5User = WPUMFactory.getUserFactory().getEP5User(sapUser);
                   //Getting the Resource...
                   IResourceContext resourseContext = new ResourceContext(ep5User);
                   IResourceFactory resourseFactory = ResourceFactory.getInstance();
                   String path = "/documents/Telefoongids/" + klaccount + ".jpg";
                   RID pathRIDimg = RID.getRID(path);
                   com.sapportals.wcm.repository.IResource resourceimg =
                   resourseFactory.getResource(pathRIDimg, resourseContext);
                   //Reading the image file...
                   BufferedInputStream bufIn =
                   new BufferedInputStream(resourceimg.getContent().getInputStream());
                   byte[] imagebyte = new byte[bufIn.available()];
                   bufIn.read(imagebyte);
                   //Mapping the image as a WebResourceu2026.
                   //IWDWebResource webResource = WDWebResource.getWebResource(imagebyte,WDWebResourceType.GIF_IMAGE);
                   IWDWebResource webResource = WDWebResource.getWebResource(imagebyte,WDWebResourceType.JPG_IMAGE);
                   wdContext.currentContextElement().setImage(webResource.getURL());
                else{
                     wdContext.currentContextElement().setImage("");
                catch (Exception e)
                e.printStackTrace();

Maybe you are looking for