PS Elements 11 print behaviour

If I have several photos open, but only one selected, and I want to print the selected one, it shows this one as a print preview but aslso prints the others. Why is this?

Thanks, Brett. With Barabara's help I've worked out whay my mistake was!
JKohn

Similar Messages

Adobe photoshop elements 10 - printer install

Just downloaded free trial of Photoshop elements 10. When going to print it is asking me to install a printer. My printer is a Xerox Phaser. I have managed to print a couple of times from editing side of elements, so my printer is obviously installed, but now just keeps saying that I need to install a printer. Having looked on this forum it seems that this is a common problem with elements but no advice that is given on this seems to sort out the problem. I have previously had Adobe photoshop CS6 on the computer and had no problem whatsoever with printing. Help please

The only other suggestion is to check the print drivers. PSE10 will rely upon the latest printer drivers being installed. Some manufactures have web sites which enable you to run a scan to ensure you have the latest drivers. Apart from that I’m out of ideas, except to use the dedicated printer, or uninstall and re-install Photoshop Elements or print single images from the Editor. I can understand the frustrations because others have experienced similar problems where the printer works perfectly with all other application except Photoshop Elements.

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

Photoshop Elements 9 prints and Previews are blank

Recently installed Elements (not the trial, the paid version) on a new MacBook Pro, and it not only won't print, the Print Preview is blank. Wondering if it was the document, so I created a new document with Elements, painted a few strokes, and tried printing again. Same result. The Print Preview is blank. The thumbnail of the image DOES show up in the Print dialog box. I re-installed the software. I deleted and re-installed the printer. I restarted the computer. All other apps are able to print, and Preview app is able to print the same documents that Elements will not print. I've been doing IT for years, and I've never seen anything like this. Any suggestions?

I may have just found a solution. In the print dialog box, under more options, colour management...if i leave the Colour Handling to Photoshop and change Printer Profile to Apple RGB or to my Printer colour profile then I could print. However, colour is off although it looked nice in print preview. So, instead I downloaded ICC Colour Profile for Mac from adobe and change back the Printer Profile to Adobe RGB(1998) which is same as above Image Space profile.
And I am quite satisfied with the print output.
Begin forwarded message:
From: Alina Hashim <[email protected]>
Date: May 11, 2011 8:25:20 AM GMT+04:00
To: [email protected]
Subject: Re: Photoshop Elements 9 prints and Previews are blank
Yes, sorry for the confusion. Normally i go to the web link to post message but it didn't work this time, so i replied directly from email and that seem to be ok.
Anyway, my printer is Canon MG5240. After reading your thread, I installed updated driver from Apple (printer driver for Mac) and when still cannot print, I called a canon rep here and asked about it and he said to go into canon website only. So I loaded driver from Canon website which also didn't seem to change anything. When I was using Elements 9 trial version i did not have problem printing from the software.

Photoshop Elements 10 printing

Why is it that in the Photoshop Elements 10 print menu, the print quality option always shows 720 dpi even though the settings in the Epson printer menu are higher?

I appreciate that but the dpi still has a bearing on the quality of the final print - your output resolution could be high but it won't mean anything if you print at draft quality!
I can't still see that there has been an answer to my query. Why doesn't the Photoshop print menu reflect what's going on in the printer dialog box?
Why is it stuck at 720 dpi? The paper type changes, so why doesn't the print quality ?
Can nobody throw any light on this? I have found only one reference to it so far online, which suggests it might be a software bug. I suppose the only thing to do is print a lot of stuff at various printer settings and see if there is any connection between what Elements is saying and what actually comes out of the printer.

Photoshop Elements Help | Print or share photos online

This question was posted in response to the following article: http://helpx.adobe.com/photoshop-elements/using/print-share-photos-online.html

How do you e-mail photo

Photoshop elements not printing correct image size

My photoshop elements 12 prints images larger than called for by the settings. A 3" square image, for example, printed at "actual size" comes out at about 3.5 inches. This is a new problem, as I've use PSE for years without it happening. I figure I must have unknowingly changed a setting somewhere, but can't figure it out. Any suggestions?

I did that, and also reinstalled PSE, both to no avail. Here's a shot of the print dialog. I don't know where the numbers shown by my arrow came from, or how to change them, but when I print the page, and the photo I am printing, are scaled up to 11x8.5, thereby expanding the image proportionately. This particular image is 3x2 inches actual, but comes out 3.75x2.5 inches. There seems to be a built-in border of some sort that I've never had to deal with before.

Photoshop elements 13 - print area cannot be opened - appcrash.New installation - same problem. What can I do?

Hi,
I wanted to print a picture in Photoshop Elements 13, which was installed yesterday.
But when I push the print button the message appears: Ph. Elements 13 does not work any more. Search for solution ...
Details: Appcrash. PhotoshopElementsEditor.exe
I was searching for online solution: program closed.
Does anyone have an idea?
Shall I go back to version 12?
Thank you in advance.

I wanted the bullets on the slide to appear one line at a time that's why I chose to create the slides in PPT. As far as I know this feature doesn't exist in Captivate.
What I found ended up fixing the problem is creating a brand new ppt slide, with a brand new text box and typing in the list. The copy/paste appears to be one of the bugs that causes the cut off text. I created a new captivate project importing the PPT slides and when i confirmed it worked in preview, I copied the slide (in captivate) and brought it into my original project.
That's a lot of rework but now I know what to avoid.
Thank you for the link.

PC running Windows 7 with Photoshop Elements 7 printing to an EPSON Stylus PHOTO R1800

Please help! I am an amateur photographer. This printer produced excellent photos until my old PC died. I just bought a new Dell XPS 9000 with Adobe Photoshop Elements 7 and connected my printer. The photos look terrible. Clearly, the PC and Printer are not working together properly (syncronized COLOR wise). To consistently obtain the best, life-like colors in my pictures, what do I need to do? WHICH (Photoshop Elements or the Epson) should manage the color, and what settings should I use? Each has a setting to allow the other to control the color. Which will produce the best photos? I have tried many different combinations of settings without success. All of my photos come out brownish yellow. I am feeling desperate. I am an older,retired person with a limited understanding of computers, so I need simple,detailed,step-by-step instructions on how to correct this problem. Thank you.

This might be helpful.
http://www.youtube.com/watch?v=tzozX9kyCPc
http://www.photokaboom.com/photography/learn/printing/1_set_up_PSE_for_printing.htm
http://photo.net/digital-darkroom-forum/00Rnws
-garry

Elements 6 Printer Profile not showing up on Elements 10 when I go to Print

A third party created a printer profile that I successfully used on Elements 6. However that Printer Profile is not functioning with Elements 10. I would definitely like that Printer Profile to operate when I print on Elements 10. What to do to accomplish that goal? That's the overview. Here's the details: In Elements 10, I press Print. then Change Settings. Then Print Quality (Listed as default 720dpi,terrible print quality). Press Change. That takes me to Epson Stylus 3800 Properties. That box has the right Printer Profile I used in Elements 6. I press OK to get it embedded in Elements 10, but it won't embed and I'm stuck with the 720dpi default. Can someone help with this enigma? I thank you in advance for your time,expertise and willingness to help me!

Hi,
How do you set this up, direct or thru an access point (AP)? Please check your setup with this book
http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Print behaviour different from 'Print Preview' in PM Order

Hi gurus,
We have a requirement to check a user status at the Operation level before a print can be triggered from a PM Order in IW32. After changing the code to satisfy the requirement at the print program level, we are able to prevent the print if the user status is not set, when the user clicks the Print Preview button. However, if the user clicks the Print button, the header system status is being set to PRT, though the print program prevents the print from being output. After debugging, we found that the behaviour of the standard SAP ABAP code is different for Print compared to Print Preview.
Looking at the userexits "IWO1*", we weren't able to identify a suitable one that allows one to make this check before a print is triggered.
Have anyone come across this / a similar problem ? Is there a solution ? Any ideas ??
Cheers,
Ashok.

Hi Narasimhan,
Yes, your guess is correct. We have tried out the possibility of controlling the print from the user status configuration side of things, but as the user status is at an Operation level, the system status at the header level still gets set, confusing the user that a print was created.
Any other ideas / alternates ?
Cheers,
Ashok.

Elements 7 print selected area only

Have just upgraded from Elements 4 to 7.
Under old version I could easily print a small rectangular selection from a possible A3 print for evaluation before printing the whole thing. There was an option after File>Print to 'Print selected area', after first making a rectangular selection on the image.
Perhaps I am missing something but I cannot find an equivalent command in Elements 7.
Couls someone please enlighten me? - Thanks.

Hello Nicole,
Thanks for that, it seems strange that such a useful feature was discontinued - A3 size paper and ink is too expensive to just run tests. Once or twice, having marked a selection using the Marquee tool, I have found that if I click on 'custom' size the selection only will appear in the print preview. Unfortunately it does not always happen and I have no idea of the criteria required to make it do this on demand.
Cheers.

How to hide elements to printer inside muse? / Como esconder elementos a la impresora en muse

English
Hello guys, there is any option to hide elements on muse site for no printing, I'm working on a catalog with pront option but i dont want the navigation menu buttons on my print sheets, any idea?
Spanish
Hola a todos, hay alguna opcion que bloquee elementos de ser impresos? estoy trabajando en un catalogo online, pero no quiero que se impriman elementos como los los botones de navegacion. tienen alguna idea?

You would need to hide page contents using custom code , you may try these options :
http://imar.spaanjaars.com/240/how-do-i-hide-screen-elements-when-a-page-is-printed
http://stackoverflow.com/questions/4816937/use-css-to-hide-contents-on-print
Thanks,
Sanjit

Elements 9 prints wrong sizes

I keep getting a different print size than I specified in Elements 9: I will specify for example a 7x10" image on 8 1/2 x 11" borderless paper, but the image will fill the whole sheet; or I will specify "scale to fit media" and the paper will be filled with a larger picture cropped to fit. How can I prevent this? Or has the problem been solved in Elements 10?

Hi Andromeda14,
Thanks for your interest, but I've moved on from last March.
If no one at Adobe is monitoring these queries and coming to their customers' aid, then they shouldn't be surprised if punters look somewhere else.
I wish you a good and fulfilling life,
Cheers
T H
14 Jan 12
PRIVACY NOTE: NEITHER MY EMAIL ADDRESS, NOR THE CONTENT OF THIS MESSAGE,
MAY BE DISCLOSED TO ANY THIRD PARTY WITHOUT MY SPECIFIC AND PRIOR APPROVAL

Ordering Photoshop Element Album Print on Kodak Gallery

I have spent many many hours creating an album using Photoshop Element 7,0 and then wanted to print using Kodak Gallery. Did not work. Here is what happened:
Click on the PSE file on the organizer.
Then click 'Order print' and landed on Kodak Gallery site and logged in, I can see my album there but could not find a way to simply order a print copy of it. Only choice seems to select 'New album' which then would force me to redo all the work, reselecting templates etc...
What am I missing ?

A bit more details should help here. Essentially, I am talking about trying to export a PSE album file from Photoshop Element to the Kodak Gallery website to order a print copy. Here how I did it:
1. Went from 'organiser' to Create Photobook, imported all my pictures and created the pse file using Photoshop Element 6,0 templates, backgrounds etc.
2. Saved it in Organiser and on a separate file located on my desktop.
3. Reopen Organiser, clicked on Share, Order print which directed me to Kodak Gallery site. I could see there my pse file or album.
4. Tried to find a print album function to just order a print copy but did not find anything like it.Always forced to go through their 'New album' function which essentially meant redoing all the work.
5. Tried to use the print photo function but then would not import or use pse file, only jpeg.
Hope this help.

PS Elements 11 print behaviour

Similar Messages

Maybe you are looking for