PS Elements 12 Depth of field, simple edit stopped wrkg while I was using it

I was editing using depth of field, simple and it stopped as I was editing. PS12 does open. This particular feature will not work now. HELPPP PLEASEEE Thanks

Go to the editor's preferences>general, click this button and restart the editor:

Similar Messages

Photoshop elements 13 depth of field guided effect

Why when I tried to use in the guided section of PSE 13 the depth of field simple effect, it did blurred the image, but after that the gradient action to clear one part of the image did not work, does anybody have an answer to that. thanks

Please note that the Depth of Field guided edit works only when done in the sequence as mentioned in the panel.
For example, if you use the focus tool *after* using the blur slider, it would result in darkening of the image and the black blobs. In such a case:
Reset the changes made in the depth of field by clicking "reset panel"
Click the button to "add blur"
mark the area in focus.
you can use the focus tool multiple times to preciously mark the area in your image with no blur.
To add the finishing touch, move the blur slider to add any extra blur required

Elements 11 Depth of Field in Guided Mode

I get black blobs whenever I drag my cursor to mark the area specified to be in focus. Am I missing a setting to make that blackened area invisible? When I click "done" the part of the photograph to be in focus is still covered with black.

Please note that the Depth of Field guided edit works only when done in the sequence as mentioned in the panel.
For example, if you use the focus tool *after* using the blur slider, it would result in darkening of the image and the black blobs. In such a case:
Reset the changes made in the depth of field by clicking "reset panel"
Click the button to "add blur"
mark the area in focus.
you can use the focus tool multiple times to preciously mark the area in your image with no blur.
To add the finishing touch, move the blur slider to add any extra blur required

Depth of Field tool in Elements 11

I have a problem with the depth os field tool in Elements 11. When I add focus, the focus area becomes a black smudge, is there a fault? Your help is appreciated.

Hi,
OK, in case it makes any difference, what operating system are you using?
To me, it looks as though you are trying the simple method.
Are you clicking on the Add Blur button first? - Does the image go out of focus after you click on the button?
After that, then you select the area to be in focus as mentioned above.
It is important to do things in the order top to bottom.
The guided mode really uses layers, one of which is the black mask you are seeing. For interest sake, if you manage to get it to work properly, if you switch to Expert mode, you will see the layers it has created.
Good luck
Brian

To change a field to edit ,which is in customer fields tab of an item in crmd_order transaction.

Hi All,
My requirement is to change a "field to edit" which is in "customer fields tab" of an item in "crmd_order" transaction.
Please find the screen shot.
Please help me with this issue

Use easy enhancement workbench
The Easy Enhancement Workbench is a development tool with which SAP applications (called Business Objects in the following document) can be extended in a simple manner.
Customer enhancements to a Business Object are defined via wizards. The Workbench then does all development work for the user; databank tables, screens and application logic are created automatically. Finally the customer enhancement is included in the SAP standard.
This also allows users without ABAP knowledge the simple possibility of extending the SAP standard.
An extension created using the Easy Enhancement Workbench does not differ technically from one created manually. In both cases transportable ABAP objects are created and the same Customer Exits, Business Transaction Events or BAdIs are implemented
You need to use EEWB feature to achieve the same.
Tutorial
http://www.scribd.com/doc/6755615/Eewb-Steps
http://help.sap.com/saphelp_crm50/helpdata/en/9f/a19c921f0911d6b1d500508b6b8b11/frameset.htm
In addtion check this note
Note 484597 - Customer enhancement of CRM applications
a guide is attached to it for telling u steps
Hope query is solved
Regards
Prakhar

Editable field with F4 help in alv tree output using cl_gui_alv_tree

HI
i need Editable field with F4 help in alv tree output using cl_gui_alv_tree
Regards
Naresh

Hi Naresh,
Pass the field catalog with the additional parameter (ls_fcat-edit = 'X'.).
for F4 help if the data element have the search help it automatically will come. other wise include the additional parameter in the field catalog (ls_fcat-F4AVAILABL = 'X')
Reward if found helpful.
Regards,
Boobalan Suburaj

Elements 10, windows 8, 64 bit, epson artisan 835 printer: prints are really dark even after using enhancements like adjusting lighting. Prints are darker than photoshop edit screen. Prints are acceptable using paint, windows photo viewer, or gallery.

Elements 10, Windows 8, 64 bit, Epson Artisan 835 printer: Prints are really dark even after applying enhancements, like adjusting lighting. Prints are darker than Photoshop Edit Screen. Prints are acceptable using Paint, Windows Photoviewer, or Photo Gallery.

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Depth of field glitch

Hi,
I'm having some trouble with the depth of field in a scene that i'm animating. When the depth of field is turned on, a weird pixelated grainy bar appears across my image. It is definitely the DOF that is causing this as it disappears when turned off. The weird bar also seems to move about, get thicker and thinner in relation to the DOF settings. Is this a problem that anyone has come across before?
I've tried completely rebuilding the project from scratch and it's still there and it's also happening on two different machines now which is very strange.
Any thoughts would be much appreciated.
Thanks,
- Lewis

Hi Rick,
I've set up another simple project and all it has in it is one 3D layer, which is a map, and the camera. Hopefully you can see from the image attached that there is a weird patch on the image. This is there no matter what part of the map I try and focus on. It sometimes moves or changes shape but it never goes away. There are no effects or anything, just the map and the camera. The map itself is High resolution but I've tried using a much lower res image and the same thing happens.
Thanks,
- Lewis

Is it a bug about element's depth?

I have two elements in one frame and if I use:
alert(fl.getDocumentDOM().getTimeline().layers[1].frames[2].elements[0].depth);
alert(fl.getDocumentDOM().getTimeline().layers[1].frames[2].elements[1].depth);
It shows me 0 and 1, It is all right!
But if I don't select two of them , the depth is 2 and 2!
How it possible!!!!!
Is it a bug?

Hi,
It works correctly for me. Can you share your test file along with the steps so that we can have a look at what's going wrong for you?
Please note that simple shapes(unselected) at the same layer have the same depth. If you have a drawing object or a symbol instead, then their deapth would be different.
-Nipun

Why does Premiere Elements 9 keep crashing during basic editing?

Recently purchased Premiere Elements 9 to do some reasonably simple editing combining videos and photographs. After about 2mins to 10mins of using the software it unexpectedly crashes for no apparent reason. I have only ever had 2 or 3 layers in the video and often when I go to view a preview (but not exclusive to this) it shuts down. Sometimes its when I am manipulating text or trying to add effects. I'm using a brand new iMac and the only other programmes I am running concurrently are Safari and Photoshop although I have tried it with no other programmes running and it still happens. I've added details below of the processor and graphics card I am running to see if there are clues there. I get an error report but its a bit large to paste here although if anyone wants to take a look it would be much appreciated!
Model Identifier: iMac11,2
Processor Name: Intel Core i3
Processor Speed: 3.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 4 MB
Memory: 4 GB
Chipset Model: ATI Radeon HD 5670
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x68c0
Revision ID: 0x0000
ROM Revision: 113-B9850H-133
EFI Driver Version: 01.00.416
Any help or thoughts would be much appreciated.

Thank you for the clarification. Titles should not be an issue at all. You are correct,they are an intrensic part of PrE, and should cause no issues.
I think that Neale's link will be useful. A lot of that material should be X-platform, but you will see some that is Windows-specific, especially as PrE was not X-platform, until PrE 9, and some of the suggestions, while still applicable, were when the program was only on the PC. Also, I gathered up some of it, and have to admit that I am a Mac-illiterate.
Something is definitely wrong with your PrE 9.0, with your system, or with its setup. Steve Grisetti, our MOD here, uses PrE 9.0 on an iMac, that is not a powerhouse computer, and has had few issues. I'd like to hear his comments, as he is X-platform, and many of us are only PC-guys. It's not that we do not want to help, as we do, it's just that many of us do not know the ins-and-outs that might be specific to the Mac.
Now, aspects of performance, such as the nVidia, or ATI video drivers, updating QT and updating PrE are not platform-specific, and are places to look first.
Also, when PrE crashes, do you get any error messages? I can tell you where to look for OS errors and warnings on a PC, but am lost on the Mac. There has to be some process logging function in OSX, like Event Viewer in Windows. It basically logs every call to every service, program, or process, and monitors the response. When things do not go, as they should, a warning, or error message is written to Event Viewer. Some of those are just cryptic code, and meaningless to even a Windows engineer, but some will have real, useful data, and the best will have links to say the MS Web site, or maybe to a driver mfgr. with tips on what went wrong, and best of all, what to do about it. Unfortunately, I cannot even begin to tell you where to look on a Mac.
One other potential concern would be the amount of free space on your HDD's. PrE creates very large working files, and needs a lot of real estate, just to work. How much free space do you have on each of your HDD?
Sorry to just be thinking out loud here, and wish that I had some wonderful, and useful insight.
Good luck,
Hunt

How do you stop the camera depth of field affecting one text layer?

Just as the heading says it really
, i'm doing a fly through sort of thing and as the camera slows down to give the viewer time to read some text the depth of field of focus runs out and the text begfins to get a little blurry, is there a way to stop the text from being affected by camera DOF? Do i have to make the text a non-3D layer?
thank you very mnuch in advance
paul

Hi, Thanks for your response,
I could adjust the focal length on the camera to match the text but that then makes some other elements in my project change their focus, or 'blurryness'. I was just hopeing to keep the camera as it was and just make the text layer be not affected by the camera's focal length. Turn off DOP for the text type of thing. Is there such a setting? Thank you so much for your time
paul

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

Photoshop Elements won't create a file, edit a file or save a file...

Hello all,
I just bought an Epson 600 scanner which came with a copy of Photoshop Elements (v7, but that's another question for another day). Was working fine for awhile (a few weeks) but now I'm unable to edit any files. This is on an Intel Mac Pro running Windows 7 (natively, not in VMWare) with 8 cores and 8 GB of RAM and terabytes of free disk space.
Here's a sample sequence of events:
1) Launch PE
     - Get selection screen for organize, Edit, Create, Share.
2) Select Edit
     - Launches editing workspace normally
3) Click File->Open
     - Get the file browser window with thumbnails (standard windows stuff)
4) Click a TIF file (or a JPG file) and click Open
     - File browser window closes and I'm taken back to the editing view but there's no picture. No sign that it did anything (all the menus that are greyed out when the editing screen is empty are still grey etc - including the File Save menu option)
5) Try to drag a file into the editing workbench from windows explorer (either a TIF file or a JPG)
     - Same behavior - switches back to the workbench, but everything is still greyed out and the file isn't there.
6) Try to create a new file
7) Click File->New
     - New file dialog pops up asking me to name and size it
8) Give it a random name and leave it at the default 6x4x300dpi and click OK
     - New file dialog goes away and returns me to the editing canvas, but it's still blank and all the menus remain greyed out
I get the exact same behavior if I try "Open As" or "Open recently edited files" etc
I AM running Symantec anti-virus and I've noticed some people mentioning that that can cause issues for Adobe, but turning it off really isn't an option. So if there's some rule I need to set up to allow some background process to talk, that's fine but I can't just disable it to use PE.
Is there any debugging log kept somewhere? (I suppose I could check this site more thoroughly for that info)
Any help or suggestions would be most welcome!
Thanks,
Jason

Try resetting the PSE preferences by
   1. Close Elements.
   2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Edit.
   3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
try and let me know your comments.
-Garry

How to change the screen element of a single field in a table control

Hi Gurus,
I want to change the screen element of a single field (or the whole row) in a table control according to a condition.
I have 2 columns in the table control. One is an input column and one output only. When user enters values into the input column, they need to be compared against the values in the other column, and if there is a discrepancy, the row where the discrepancy is needs to be highlighted.
I have tried the following code which highlights the whole column ...
CONTROLS: TC_ZVOYG_BINS TYPE TABLEVIEW USING SCREEN 0500.
DATA: wa_tc_zvoyg_col LIKE LINE OF TC_ZVOYG_BINS-cols.
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          wa_tc_zvoyg_col-screen-intensified = 1.
          MODIFY tc_zvoyg_bins-cols FROM wa_tc_zvoyg_col TRANSPORTING
          screen-intensified WHERE screen-name = screen-name.
        endif.
      endloop.
    endif.
endloop.
And also the following code which makes no change ...
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          screen-intensified = '1'.
          modify screen.
        endif.
      endloop.
    endif.
endloop.
Thanks in advance.

Hi,
The modification of a screen element attribute (LOOP AT SCREEN...MODIFY SCREEN) must always be done in the PBO (for a dynpro, it will be in a PBO module, i.e. declared by MODULE ... OUTPUT)
About the loop at the internal table, it is done automatically by the system, also during the PBO, you'll find something like LOOP [AT itab] ... WITH CONTROL ... in the PBO part of the screen flow logic (note: you may have to complete with a supplementary READ TABLE if you don't use AT itab). So you don't need an additional loop.
Best regards
Sandra

Make 1 field non-editable while using transaction VA02.

Hi,
I want make a field non-editable under tab 'shipping' for transaction VA02. I know one way of doing it by adding code to MV45AFZZ -> USEREXIT_FIELD_MODIFICATION. is there any other way ( other user-exit / BADI) to achieve the same.

Hi,
Please go through this link... It tells you the step to follow....
http://www.sap-basis-abap.com/sapbs010.htm
Also please refer these posts..
Re: Transaction Variants & Variant Transactions
Re: Transaction Variants

PS Elements 12 Depth of field, simple edit stopped wrkg while I was using it

Similar Messages

Maybe you are looking for