PS Elements 8 on Windows 7 - Photomerge Panorama not available

I have PS Elements installed on Windows 7 and when I go to File/New/ the "Photomerge Panorama" is grey and not available to use, while all the other Photomerge options are available.
How do I make it available?
thanks,

You need to select mulitple images to make panaroma. Try selecting few images and see if the option is enabled.

Similar Messages

I am trying to install windows on my mac via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available.

I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006 via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?

You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation

Windows support software is not available

I'm running MacOS 10.6.8 (Snow Leopard) on a 1st-generation Macbook (Core Duo, won't run Lion). When I tell Boot Camp Assistant to download the Windows support software, I get a message that "The Windows support software is not available." I do have the Snow Leopard install disc, but it (obviously) did not come with my computer so it seems like I should not use that option. How can/should I proceed?
Never mind, right after posting (despite previously searching for relevant discussions), I found my answer in a different thread. According to Fortunny, this is not required for Boot Camp 3.0.

Correct. The Windows support/driver software is on your OSx install disk unless you are running Lion. If running Lion you download the support software.

Photomerge panorama not working in elements 11

Hi:
I cannot make the photomerge panorama function work in elements 11. It simply
generates the standard Window 7 error message and when it can't find a solution
the program closes. In previous versions ( 9 and 10) it always worked and never
caused a problem.
Attempting to rebuild the preferences file as suggested for a similar problem affecting
earlier versions was also done but to no avail. Its a function I use quite frequently so
until it is resolved I will keep using version 10.
Anyone have a solution for this anomaly??
Michael

The error message pops up right away and is generated by Windows not PSE. The java script that generates the familiar combo box that gives you the various panorama options for merging doesn't even have a chance to get started. The scripting support plugin is in Photoshop Elements 11>Required>Plug-Ins>Automate. This location is a change from the previous versions.
Thank you
Michael

Elements 8 - Mac OS10.6 Photomerge Panorama Problem

When I click on the File>New>Photomerge Panorama an error message "JavaScript code was missing" appears. And Photomerge Panorama will not open. I have uninstalled and reinstalled PSE8 but the problem persists.

No. I did ask Adobe Support and they said it was a problem with the operating system. Which to me is a dead end. Hopefully somebody out there can figure out what and where the JavaScript file Elements is looking for and tell the rest of us.
Sorry for not having an answer. Good luck on your quest.

Photomerge panorama not activated

At the moment I am testing Potoshop Elements 9. I would like to test the Photomerge Panorama function. But it ist not activated in the menu either is it available in the edit area.
How can I get to it?

Nemo,
The Photomerge Panaroma only works when you are in the Full Edit mode or the "vollständig" mode. It will not work under the Quick ("schnell") or the Guided ("geführt") mode.

Photomerge Panorama not initiating in PSE7

After reading many other threads on problems with Photomerge Panorama in PSE7 I wasn't able to find one that had the same problem with me.
When I add the selected pics to the Organizer and choose Photomerge Panorama, a new Editor window opens with the select pics shown along the bottom with an additional blank file called Untitled_Panorama1. The process then stops here. No error message pops up or anything.
I am running Windows 7 with 4 gb of ram. Any help would be appreciated!

There's nothing out of the ordinary about that image size, either. I don't have PSE7 installed, and I didn't find any troubleshooting information about panoramas and PSE7 when I searched the Adobe website, so I can't offer any more advice.
I think you'll be impressed with that Microsoft program.
If you're thinking about purchasing PSE10, you might want to wait another month until the new version is released.
Ken

PSE 8 - Photomerge Panorama not working?

Trial version (is Panorama disabled in trial?), XP, default preferences
File->New->Photomerge Panorama and select either 2 open files or 2 files off disk. Tried Auto reposition, manual , and in both cases, the program thinks for a couple seconds and then shows me an empty file on screen (checkerboard) entitled Untitled_Panorama1.
Tried a series of different photos, and have done this before in PSE7 with no trouble, so this is puzzling.
Is this a bug?

John, I want to add some other information for you concenring this problem with Photomerge Panorama in PSE 8 that you have been looking into, as I too get the error message you detailed in your earlier comments on this problem. I tried your solution (saving for the web) and found that it did work but, of course, it is a pain having to do this workaround. Then, quite by chance I found that Photomerge Panorama was working correctly and so I tried several files, some of which had not worked before!
Tonight, the old problem returned and I have been able to replicate both the problem and the solution. If I have the Organiser open (which I must) but not the Editor, then it works fine. If I then try to do another panorama with new files, then it usually throws up the error message and fails to work. Any further attempts with the image files (or previous ones that have worked) also fail, ending with the error message. However, if I close the application completely, and then reopen it, the same files will work perfectly with Photomerge Panorama.
Maybe this throws some new light on the cause for you? (and hopefully Adobe if they read this posting). Is it a memory problem? (I have 1 GB of RAM)
It is certainly very odd.
On another matter, but kind of memory/processor related, although I doubt if you will remember this, but last year when PSE 7 was announced but before it was available, I queried the processor spec moving up to requiring a 2GHz processor (it was a huge leap in spec from previously required processors and also not a size much then available for PC Notebook users!
You kindly advised that you thought it was more a case of "sloppy marketing" which seemed to be borne out by some later advice that I received and sent you and others from Adobe Technical suppoort. Recently, when I saw that PSE 8 required a 1.6 GHz or faster processor (the website spec sheet) I was pleased and thoughtful! Today, my purchased copy of PSE8 arrived. (I have been using a free trial version). Guess what, on the box the processor specification is "2 GHz or faster" So now we have either another case of "sloppy marketing" or perhaps, it DOES need 2 GHz and maybe this is the problem/part of the problem with Photomerge Panaroma not functioning correctly/consistently?
Maybe though, it IS just a bug and one that I really hope that Adobe can address and rectify AND thsat we don't have to wait until PSE 9. That would be very, very poor.
How do you report bugs/possible bugs to Adobe or will you further report the issue, assuming that you can replicate what I have found with Photomerge Panorama?
Hope this posting is helpful to you and others experiencing this problem with PSE 8
Kind regards

Photomerge Panorama not working

Okay, I posted this in the tips and techniques forum, but am getting no responses--and I believe it is a technical issue anyway.
I recently purchased PSE7 and am trying to make a panorama out of 3 pictures. I choose new-photomerge panorama and get a couple outcomes. If I choose auto--the "finished" result after the program chugs and flips through the pictures and looks as if it is working turns out as a "panorama" of only the middle image. Oh and it's 4x6 of just that middle picture. So, I try and choose the interactive panorama, choose my three pictures, it chugs and flips through pictures like it's doing something and then goes to a blank editor screen. That's it.
I have tried uninstalling and reinstalling the software--twice. Someone posted that PSE doesn't play well with Norton, so I uninstalled and reinstalled. Still didn't work, so I tried again, using KB articles from Adobe on what files to manually uninstall, etc. For the reinstall, I installed in Clean Boot mode on my XP system.
So, what now--why is the panorama portion of the software not working? If I contact Adobe will they be able to figure it out or are they just going to tell me to uninstall/reinstall which I've already done?? Please help!

>> If I choose auto....turns out as a "panorama" of only the middle image.
If this is the case then maybe the images you are using to create the panorama are not clicked for this purpose. To create panorama using auto feature you should use images which have some degree of overlap between the images.
In case you still want to create a panorama with images that were not clicked with this aim, you use the 'interactive' feature.
>> and then goes to a blank editor screen.
Do you mean that the images selected by you don't appear in the image strip as well?
I suggest you go through PSE7 help link for Photomerge panorama. http://help.adobe.com/en_US/PhotoshopElements/7.0_Win/WSae2ea3b149d0c3591ae939f103860b3d5 9-7fcf.html
In case you find PSE behaving differently from as described in the help file then there might be a problem.
Let us know in either case.

Elements 9 photo collage - message "valid size not available for this creation"

Hi There,
I am trying to creat a photo collage in Elements 9 and always get the message "Valid size not available for this creation.". Has anybody figured out a fix for this bug????????????
Thanks
Roy

http://kb2.adobe.com/cps/927/cpsid_92734.html

HP Deskjet 3920 driver for Windows 7 64 bit not available anywhere

Printer HP Deskjet 3920
No drver software is available for operating system Windows 7 64 bit
This is the 4th week since I started search.
This question was solved.
View Solution.

Hello I am an employee at HP and I just replied to another person on the same type of problem. I don't know if you already did this but I had the same problem on a different printer and it worked for me. You have to have the printer turned on and hooked up to your PC and then do a Windows Update. With Win7 update the process will see that you have the printer and need a driver and should give you the option to download it. You can then select it and download it and it should work. Here is also the text from the HP website. I hope this works for you.
NOTE:When you connect the USB cable to the printer, and then to the computer, Windows 7 activates Windows Update. Windows Update searches online for the most recent product driver on the Windows Update site. If the online driver is more recent than the driver stored in Windows 7, the computer downloads and installs the updated driver.The Windows Update process takes place automatically. Therefore, you might not notice that the process is in progress.

Windows Repair tools when a Windows 7 DVD is not available?

Hello all!
I'm assessing my options for a Windows repair when: 1. No Windows DVD/CD is available, 2. The factory restore is not an option, and 3. When Windows SFC and Chkdsk don't seem to find a problem and even a tool from Tweaking called 'All-in-One'.
doesn't seem to restore full functionality.
Specifically I'm trying to repair a .net issue that is preventing the 4.5.2 update from installing (windows update fails with code 643), but with this particular computer, I'm also trying to repair other things.
Thanks!

1. Give try to Aaron Stebner .NET removal tool and reinstall .NET.
2. That is why it is recommended to backup vanilla plain system...
3. Ask someone from your friend or ask computer vendor support (if you have OEM).
Rgds
Miulos

The Windows support software is not available.

This error message appears when I try to download the windows support software. What do I do?

Reboot in Safe Mode and try these tips:
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Boot in Safe Mode and try to download the Windows Support Software again.
Then follow these tips:
Advanced Network: Proxy Settings, I uncheck "Auto Proxy detection" and make sure you have the interface you use selected and none others.
"Go into System Preferences - Network - Advanced - Proxies Uncheck "Auto Proxy Discovery", click OK, Apply"
After Unchecking "Auto Proxy Discovery" I also had to Uncheck "Use Passive FTP Mode (PASV)" and then Restart Boot Camp Assistant.
odiggy's comment and tried restarting Boot Camp Assistant. That did the trick, even though the Auto Proxy Discovery checkbox ended up the same as it started. Windows support software is now downloading... if you're downloading to an external drive make sure there's a least 1 GB of free space because the WindowsSupport folder is around 700 MB and presumably will grow with time.
https://discussions.apple.com/thread/3223773?start=15
Also, Change Domain Name Servers to OpenDNS IP address servers - that should be at the router firewall rather than the OS but may be in both for some people. You may be using the defaults your ISP uses, save those if you want, and try these:
208.67.222.222
208.67.220.220
Make sure you are not using LittleSnitch or Symantec (probably other 3rd party firewall)

Windows 2008 R2 randomly not available

Hi,
We have a weird problem with one of our Windows 2008R2 server (not virtualized).
It randomly "freezes" actually i can ping it, but as i see most of the services are stopped when the event happens.
Unfortunately i have no logs, because when it freezes the server's log service is also stopped.
The freeze itself is totally random, last time was midnight, no one used it, so i think it couldn't be a load problem.
This is a remote desktop server. When the above problem happens and i try to log in via RD or console i have an endless login process which says "waiting for user profile service". So the only solution so far -> reset :/
Are you have any idea how to find out what cause the problem?
Thanks, Robert

Hi Thund3rw,
The server hang can caused by many reason, such as the hardware work abnormal, driver defects, the ususlly step we can try to uninstall new installed software, disable the AV soft then monitor whether the issue re-occur. It's suggested to contact
Microsoft Customer Support Services (CSS) so that a dedicated Support Professional can help you on this issue.
To obtain the phone numbers for specific technology request, please refer to the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS¡¯
If you are outside the US, please refer to
http://support.microsoft.com for regional support phone numbers.
Thanks for your understanding.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Encrypted Profile Migration from XP to Windows 7 (Windows & Program Files Folder not Available)

I'm trying to migrate a few encrypted profiles from Windows XP to Windows 7
I have a disk without "Windows" and "Program Files" Folder with the userprofiles without a backup of recovery agent and related certificates.
By USMT or in another way it is possible a deployment and recovery (also partial) of these userprofiles folders? These data can be accessible in some way or there are lost forevar?
During USMT deployment by scanstate/loadstate cmdline tools: I used to be specify a KeyString
after the switch command "/encrypt /efs:". I can blank "/efs:" argument during USMT Deployment?
Thank you.

Sadly, without a backup of encrypted userprofiles, related data are unusable after scanstate phase.
Anyway, what
Hetti
Arachchige V Aravinda had written is very important to know when you copy or move ecrypted folder and files in a different partition or in a another disk.
Thanks Hetti
Arachchige V Aravinda for your good info and tips.

PS Elements 8 on Windows 7 - Photomerge Panorama not available

Similar Messages

Maybe you are looking for