PS Elements 8 - "Save As" PDF File Sizes Huge
In Photoshop Elements 8.0, Photoshop PDF file sizes are huge when using the "save as" function, using JPEG compression.
No matter which "Image Quality" is used, the resultant PDF is huge. At "high" quality the file is 20 MB. At "medium" quality, the file is 15 MB. At "low" quality, the file is also 15 MB, much too large. This was not a problem in older versions of Elements. File sizes were typically just more than 3 MB.
If I save the image as JPEG files using "maximum" (10) quality, "medium" (5) quality, and "low" (3) quality, I can insert the image(s) into Word and use the Acrobat Pro PDF printer driver to get PDF file sizes of 1.8 MB, 1.3 MB, and 1.1 MB. These PDF files are perfect. Even the lowest quality is perfectly readable for my purposes. The older versions of Elements worked fine so I didn't need to take the step of saving in JPEG format, importing to Word and then printing.
Does anyone know if Photoshop Elements Version 8 is capable of saving PDF files in the smaller file sizes? Is there a plug-in I can purchase that would give better results?
Photoshop Elements Version 8.0 (20090905.r.605812) with all updates applied.
OS = Windows 7 Enterprise (6.1, Build 7600).
Thank you for any help or adevice.
I'm dealing with the same situation.
With Photoshop Elements I use to scan a picture at 300 dpi, save as PDF file, jpg compression medium low
quality and alway got files under 5 Mb, even lower than that. Colour or black and white pictures.
Now with Photoshop Elements 8.0 did the usual procedure but the pdf are huge, larger than 8 Mb, even more
than 10 Mb !
Am I missing any detail in settings program, perhaps ?
Thanks for any suggestions.
Similar Messages
-
Snow Leopard - Save as PDF file size
Since my Acrobat Printer no longer works after upgrading to Snow Leopard, when I "save as PDF" the file size is several times what the output used to be using the Printer. So saving Illustrator or InDesign files where the Mac OS PDF printer can't be used, I end up with a 600k file that used to be 80k.
Are there settings in the Save As PDF dialog that can get that size down? It always worked fine before for my purposes so I don't know the advantages gained with this huge files size.
Steve Hornwebsentia wrote:
But I'm not using the Mac PDF creator. So what I am asking is a way to use the File/Save As/Adobe PDF
That is the Mac PDF creator. The PDF printer is hosed in Snow Leopard so you basically won't be using Acrobat at all.
File/Export/Adobe PDF command or even the Print Dialog/ Adobe PDF
In InDesign? If so, use the smallest file size setting. Also, that's not Acrobat.
websentia wrote:
Distiller still can make small files but with added steps of creating objects that fill the artboard (rectangle with white background or whatever), save as EPS, drop into distiller, then multiply all that by the number of pages in the document..
Again, you can use "Save As" in Illustrator to save it as a PDF file. Check the advanced settings to be sure they're tuned up for what you want. In InDesign, use the "export" command to create a PDF using the InDesign PDF generator. Check your presets and choose the one that works best.
Both of the above are just as easy as printing to the Adobe PDF printer. You just need a little practice using them to get started. -
I am currently using Word 2008 to produce a club newsletter for email distribution. The Word (.docx) file can be up to 2.4MB in size. When I use Print > Save to PDF the resulting file can be as large as 12MB! I tried using the CUPS-PDF virtual printer option and got a file 26MB is size!!
A friend used his Windoze machine to print to PDF and got the file size I was after at just over 1MB. I also tried the Adobe Online "convert to PDF service" and got file sizes lower than 1MB.
What is going on with the Mac OSX conversion? How can I get smaller PDF's without having to shell out for Adobe Acrobat Pro?Peter Ongley wrote:
How can I get smaller PDF's without having to shell out for Adobe Acrobat Pro?
This may not help or may degrade any images in your document, but try this: Open the PDF file in the Preview application. Invoke File -> Save As, then set "Quartz Filter" to "Reduce File Size", give the file a different name, and save the file. -
How can converting a MS Word file to a pdf make the file 5x bigger? Can someone tell me how to update the "save as pdf..." feature when "printing" a file in MS Word (Word:mac 2008, ver. 12.2.5). The problem is that using this to create pdf files gives huge files when the Word file has graphics pasted as pictures from Powerpoint, even for simple graphics and when first exported at low resolution (180 dpi) as jpg files from Powerpoint and inserted into Word.
Here's a little more info on the save_as_pdf issue. It is Word files in 97–2004 format (doc) that get 5x bigger. The conversion works fine and file size is normal if the Word file is saved in most recent Word format (docx rather than doc). Somehow MS Word can't save its own files properly in pdf format. Thanks Bill for all the frustration.
-
Why does PDF file size increase each time I "save" tagging tasks?
Why does PDF file size increase each time I "save" tagging tasks?
Given:
1) I'm running Acrobat Pro 11.0.07 (this is most current version)
2) My file size starts at 750mb and ends up 15mb when finished tagging.
3) Only certain documents experience this increase, i.e., no visible pattern of document characteristics
4) PDF's are not full of images...in fact, mostly <H1> <H2> <H3> <P> <Figure> alt text, ect.
5) Occurs with text PDF's and/or fillable forms (again, does not happen to all documents...only some)
6) File increase occurs incrementally as tagging tasks are performed; i.e., each new save increases file size a few megabytes.
7) Occurs whether I "save" or "save as"
8) Difficult to optimize these files without corruption
9) I'm running Mac OS 10.9.4 (this is most current version)Thank you so much for responding! I've been experimenting with the SAVE AS vs. SAVE for the past few days...and you are correct. It's funny because I've been tagging files for 2 years and never noticed this. Probably b/c I use both methods depending on the tagging tasks...some are more complicated than others and should not be overwritten. In those cases I SAVE AS new file.
I love this forum...thank you again! -
I use Adobe Acrobat Pro XI (11.0.08) When performing "Save as" "Reduced file size pdf" Adobe processes for a while then completely stops, and has to close down. Just started doing that today.
I have Windows 8.1, and when I right click on the Windows flag (bottom left), the menu gives me a "Search" option. When I enter "%temp%", it goes to " "my username"/ appdata/temp" which is a list of file 1718 file folders. Many are empty but I did a small sample. Is that the right place to delete? I tried Windows- Disk Clean, but that did not help.
-
Reduce PDF File Size - any ideas?
Hi all,
I have a C++/C# programs that generates PDF's in Adobe Reader using Infragistics. This is a recent change from using VS View as our old method of illustrating - we now use Infragistics. This has resulted in our PDF File sizes almost doubling due to us now using Bookmarks within the PDFs and also having to embed the fonts. There are some pictures used but these are already very small so they are not the issue. I was wondering does anyone have any ideas of how we could possibly reduce the size again or any possible work arounds.
Any help would be great.
Colly (Ireland)Where do these EPS files come from Photoshop or Illustrator?
Illustrator
There may be nothing wrong with EPS files technically, they are considered archaic in a modern workflow. Best to save as a .ai with pdf compatible file - or to save them as PDF x4a with Illustrator Editing Capabilities enabled.
But I don't think there's any need to run out and convert all your files - perhaps keep it in mind going forward.
Photoshop
EPS is really not the best format. If it's pure raster then PSD or TIFF would be preferred format, if it's Raster + Vector Shapes, Vector Masks, Text Layers then PDF is preferred over EPS (with photoshop editing capabilities enabled).
File sizes react differently depending on the content on the choice of compression. Heavy Vector files from Illustrator can cause Huge file sizes in PDFs.
See this article (and more importantly the comments!)
http://indesignsecrets.com/creating-smaller-pdfs-from-a-vector-dense-book.php
If you can provide a bit more info on your workflow and what settings you are using to save it would be great. -
PDF File Size - any way to compress further?
We have are using the Crystal for .NET export method to export a report to a .pdf file, and are having an issue with the pdf file size on a report that contains images. The images are stored in a SQL2005 database as blob or varbinary(max). The report executes a stored procedure that selects data (including images) to produce a quotation. There are input parms to decide which images to print (for example A, B or both A&B). Both types of images can appear at the line level on the quotation. Type A images print in the main report, Type B images are in a subreport. Both the main report & subreport execute a stored procedure to select an image type.
Our issue, when both Type A and B image is selected to print on a 293 line quote. The PDF file size is 44.23MB
When Type A only is selected, the PDF file size is 2.64MB
When Type B only is selected, the PFD file size is 43.95MB.
There are more Type B images that would print at the line level than Type A, but is there any way to compress this down further as it is too large to email.You mention that you are using Crystal for .NET, but not what version; CR for .NET 2003, 2005, 2008. 2010?
Applying the latest fixes for the correct version of CR would be the first thing to do.
Next, I'd have a close look at image B as it appears to be the one adding the most "bulk". How is this image different from image A?
General tips re. images:
Save the files a BMPs.
When .jpg image is inserted into Crystal Reports it is converted into bitmap format and as the result of the conversion the report may loose some quality, scale and other issues may arise... E.g.; Crystal Reports is not so good a graphics management tool
When an image is saved as a .bmp, then there is no conversion required and thus the quality of the image should be preserved.
Best practice: save the image with high resolution and required size as a .bmp format then insert this image into Crystal Reports.
Resize the image to the smallest possible size and downgrade the DPI to 72. This will ensure your image is as small as possible and Crystal Reports will have to put in the least amount of work to display it.
Have a look ar KB [1241630 - Exporting a Crystal report (XI) to PDF generates a big PDF file|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233343331333633333330%7D.do]. This KB, may apply to your version of CR, or not. In any case, you will have to use the KB as a guide and determine what the appropriate registry entry would be for your version of CR.
One more thing. Many people like to use jpg files as they are smaller than bmp files. However, as far as Crystal Reports is concerned, this is inconsequential. The report file will be the same size if a file is inserted as a jpg or a bmp. This is due to the jpg conversion to bmp Crystal Reports does internally.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
Using Examine Document Remove increases pdf file size !
Hi,
I have Adobe Acrobat Pro v9.3.0
I've been editing a lot of scanned .pdfs - rotating and cropping pages.
All this has previously worked fine with v8 but now I find that Acrobat 9 is increasing the .pdf file size after using Examine Document and clicking Remove
For example:
original file: 16,861 Kbytes
file after cropping 74 pages (from A4 to A5): 16,879 Kbytes
file after running Examine Document > Remove cropped metadata : 79,914 Kbytes !!!
With Acrobat 8 this process would normally have halved the file size.
Am I now doing something wrong ??
Thanks in advance.Hello - This problem is still here !
Acrobat 9 Pro version 9.4.2
I've got a .pdf created by an agency (so not a scanned image) which I want to make as small as possible for emailing to hundreds of people (I'll attach it if possible somehow ?)
I open it up when it's 331Kb
Click Document > Examine Document
Check the Metadata and Deleted/Cropped items
Click Remove
Click File > Save As and hey presto, the new file with all that stuff supposedly removed is 2,588 Kb
Surely I'm not the only one who's bothered about .pdf file size ? -
Hi,
I am using Adobe Acrobat Elements 7.0 in my computer to convert files like .txt and .doc to .pdf files. But currently I'm facing a problem with the converted .pdf file size. For example, my .doc file is 5MB and after I convert to a .pdf file, it becomes 10MB. The file size basically multiplies itself by 2.
I've tried converting .txt and .doc files and it gives me the same problem. I've tried reinstalling, tried all kinds of settings, and recreating user profile but it doesn't help. Can anyone help me? Thank you very much.Sorry. The problem is caused when I want to password protect a .pdf using elements. So I used Adobe Reader to open the .pdf file then I'll print using Adobe Printer so that I can password protect it and output file size is actually 10 times the normal .pdf file.
Please help!! -
Having problems reducing PDF file size.
Really frustrated...
Mac 10.6.8
Acrobat Pro X 10.1.4
I do not have access to the originating files for the PDF in question. Original file is 268MB.
6.25" x 10.25" document size.
I have used Save As Reduced file size. Increased file to 312MB.
I have Save As Optimized PDF with smallest file size. and got the file down to 247MB.
I printed out to a .ps file and ran it through Distiller with a custom Smaller File size taking it down to 72dpi (.ps file was 2.6GB) and got the file to 216MB.
I did another Optimize of the 216MB file clicking everything [flattening, fonts, images, etc.] and the file came out to 530MB. (Really?!?!)
[This also took 3.5 hours.]
Ok, content stream at 97%. I don't know what that is or how to reduce it.
I'd love to get this below 100MB and below 50MB would be great.
Any help / hints / tricks / tips are greatly apprectiated.I'm not sure that printing to a new PDF is the answer. When I print to a PDF, my pdf size balloons (often by 3x the original size). I've checked the settings in the print profile (verifying I'm printing to black and white, and lowering the DPI from 1200 to 300) but even at that, the finished product is often 2.5x the original. (Background on the document ... it was paper, I scanned it at 400 dpi. The file size was around 3 MB. I added a footer and then printed to pdf. The finished product was 9 MB.) Any other thoughts would be greatly appreciated. Thanks
-
How do I save a pdf file in version 1.3?
I'm currently using Adobe Acrobat 9.0 PRO.. and I need to save a PDF file in version 1.3. How do I do it?
Please help w/ any kind of reply!!!Use either Reduce file size (under the Document menu now in AA8) or the PDF Optimizer under the Advanced menu.
-
Large PDF file sizes when exporting from InDesign
Hi,
I was wondering if anyone knew why some PDF file sizes are so large when exporting from ID.
I create black and white user manuals with ID CS3. We post these online, so I try to get the file size down as much as possible.
There is only one .psd image in each manual. The content does not have any photographs, just Illustrator .eps diagrams and line drawings. I am trying to figure out why some PDF file sizes are so large.
Also, why the file sizes are so different.
For example, I have one ID document that is 3MB.
Exporting it at the smallest file size, the PDF file comes out at 2MB.
Then I have another ID document that is 10MB.
Exporting to PDF is 2MB (the same size as the smaller ID document)... this one has many more .eps's in it and a lot more pages.
Then I have another one that the ID size is 8MB and the PDF is 6MBwhy is this one so much larger than the 10MB ID document?
Any ideas on why this is happening and/or how I can reduce the file size.
I've tried adjusting the export compression and other settings but that didn't work.
I also tried to reduce them after the fact in Acrobat to see what would happen, but it doesn't reduce it all that much.
Thanks for any help,
Cathy> Though, the sizes of the .eps's are only about 100K to 200K in size and they are linked, not embedded.
But they're embedded in the PDF.
> It's just strange though because our marketing department as an 80 page full color catalog that, when exported it is only 5MB. Their ID document uses many very large .tif files. So, I am leaning toward it being an .eps/.ai issue??
Issue implies there's something wrong, but I think this is just the way
it's supposed to work.
Line drawings, while usually fairly compact, cannot be lossy compressed.
The marketing department, though, may compress their very large TIFF
files as much as they like (with a corresponding loss of quality). It's
entirely possible to compress bitmaps to a smaller size than the
drawings those bitmaps were made from. You could test this yourself.
Just open a few of your EPS drawings in Photoshop, save as TIFF, place
in ID, and try various downsampling schemes. If you downsample enough,
you'll get the size of the PDF below a PDF that uses the same graphics
as line drawing EPS files. But you may have to downsample them beyond
recognition...
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com -
I have just upgraded from CS3 to CS5. I set my documents up for print and when saving to pdf small file size the file size have increased dramatically. A typical previous size would have been about 600 to 700k now the files are comming out at about 1.7 mb. I am getting complaints about this from clients. I have tried the save as reduced file size pdf, but it really doesn't make that much difference. Can anyone help?
Try creating your own job options file in Distiller. You can change the job options setting to reduce the file size as you see fit. You may want to make sure you font subset or you can turn off font embedding entirely. You can make sure your graphics are as small as you feel appropriate.
-
How can I make the pdf file size smaller?
How can I make the pdf file size smaller?
Hi vickyb,
Reducing the file size of PDF requires Acrobat (one way is by choosing File > Save As > Reduced Size PDF). If you don't have Acrobat, you can try it free for 30 days. See www.adobe.com/products/acrobat.html for more information.
Best,
Sara
Maybe you are looking for
-
I changed my apple ID on my Macbook but I am unable to sync calendar from my iphone 4s. When I go to settings in the phone, my old ID is there, but it is greyed out and I can't change it. I was able to change the app store ID, but the one in iCloud
-
How to Change the Text Box to LOV where the Text Box displayed dynamically
Hi All, I have to Change the Text Box to LOV. But the Text Box is not the static one. In the Expense Screen, when i select the particular expense type, additonal infomation is getting displayed. There is a one additional field called 'Portfolio Code'
-
Applying changes to multiple images . . .
i'm relatively new to macs but i've been using aperture comfortably for the past few months. having just returned from a long photography trip and upgrading aperture to 1.5.1, i'm finding that i am unable to apply changes to multiple images like i us
-
Trying to run simple procedure in SQL Workshop
Hello, I'd like to test how procedures work and APEX so I setup a simple one that I'd like to run in SQL Workshop (below). I try the follow to execute the procedure: begin MY_TEST_PROC; end; But it results in the following error: ORA-06550: line 2, c
-
Quiting when clicking a button.
One of my clients is having a strange issue. I've created a lesson for them and each slide has a button at the bottom labled "Resources". When the "Resources" button is clicked it opens a document and makes a "Click To Contuine" button visible. The