PS Generic settings and configuration

Dear all,
I am configuring the PS module for project based industry (ETO).
I have J12 and J214 config guides from SAP building block library describing the generic settings for PS module.
Are these two docs are sufficient to configure entire PS module / settings?
Pl sggest me if any other useful / important doc exists in the similar context.
Rest all other modules are being configured by different module leads.
Pl dont give ref of SAP help as I am already refering to it but it is very general and covers all the scenarios which is canabalizing the things.
The useful answer will be awarded with full marks.
Thanks in advance.

Hi
If furthur details. Check out Business partner id and password from your company
So from there u can get COOK BOOKS, which will be very much useful for understanding PS and do config
- Pithan

Similar Messages

  • MM - Basic Settings and configurations

    Hi Folks,
    Please tell me what are all the Basic(General) settings and configurations to be made during a Standard SAP Implementation, as a MM Consultant. Please give them in order.
    -Pallu

    hi for basic setting u canrefer first thread of the MM forum
    New to Materials Management / Warehouse Management?
    now for the settings u can also refer the building block notes
    for MM refer following
    http://help.sap.com/bp_bblibrary/600/html/J05_EN_IN.htm
    for CIN use following link
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/cin%252bconfiguration
    More useful for CINwill be following
    http://www.scribd.com/doc/2527809/CINcustomizing-1
    regards
    KI

  • Settings and configuration for APO SNP?

    Hi,
    we want to use SNP in the future.
    Which configuration must be done in the APO customizing?
    Which data must be transferred from R/3 to APO?
    Does anybody has a kind of check list for the necessary settings?
    Thanks,
    Michael

    Ken,
    Ever since SAP discontinued the SCM 5.0 Best Practices, I have never seen all the APO building blocks that actually still exist all stored in a single place by SAP.  I have to hunt around to find them.
    RDS solutions (which sometimes include APO Building blocks) can be  downloaded at
    https://websmp206.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=N&EVENT=TREE&TMPL=INTRO_SWDC_IU_PSP&V=INST&TA=ACTUAL&
    provided you have adequate authority.  Most of the building blocks that can be downloaded at the above link have also been published "somewhere" in help.sap.com.  Also, you occasionally see a non-RDS BB in help.sap.com.  So, when I want to find APO building blocks, and I can't find them under RDS solutions, I go into Help.sap.com and start using the search feature (the "Global search" on the home page, not Trex search). 
    If in your travels you ever find a 'centralized' repository for all APO BB docs that is publicly available, please publish it in SCN, because I am sure that many SCN readers would find this info valuable.
    Best Regards,
    DB49

  • SNC Router settings and configuration

    Hi All, I wanted to open ports only for Production Server in my SNC Router and not for my Other servers please help me how can I configure SNC Router settings for the same. And also please send me the configuring steps of SNC router from SAP notes PDF. I will be thankful for it.
    Regards,
    Prashant Chauhan

    Hi Rupali,
    Thanks for ur reply, I had tried by doing the same settings but it did not worked, below is my current setting of SNC Router, here my SOLMAN Server IP is 192.168.1.135 & my Production Server IP is 192.168.1.84, and when I am using SAP Router string I am able to access all my other servers like Quality, Development or BIW. So I want to restrict those access & want to allow only my Production server. Please help.
    P * * *
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.135 3200
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.135 3389
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.135 3200
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.135 3389
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.135 3299
    #Permission entries to check if the connection is allowed at all
    #P sapserv2 194.39.131.34 3200
    #P sapserv2 172.168.1.228 3200
    #P sapserv2 124.247.200.231 3200
    #P * sapserv2 3299
    P * 192.168.1.135 3209
    P * 192.168.1.135 3299
    P * * *

  • Oracle settings and configuration for PS

    I am attempting to install PeopleSoft 9.0 CRM etc on an Oracle database. I have a new PC (IBM T41) 1 GB RAM 1.6MHZ CPU.
    I have downloaded Oracle 10x, PS 9.0 apps, Tuxedo, BEA, IIS 6.0.
    All, except PS has been installed successfully.
    Question: What are the settings in Oracle that need to be configured in order to get PeopleSoft 9.0 running. [I am not a DBA and do not know the specifics to get Oracle configured properly]
    Is there anyone out there who is able to guide me, either through documentation or a response to this post?
    Charles Cohorst

    Network configuration assistant may have created at least two out of the four listed files at your ORACLE_HOME/network/admin directory:
    tnsnames.ora
    sqlnet.ora
    It can configure, if required the listener.ora and ldap.ora files. Same issue at your ORACLE_HOME. It is important to make sure those files are properly located, otherwise you won't be able to connect to your instance, and if required, your listener won't be properly configured.
    If you want further details on how to configure these files and what the required entries mean, you may want to read the Configuration and Administration of Oracle Net Services reference manual: http://download-west.oracle.com/docs/cd/B19306_01/network.102/b14212/part2.htm#i436475
    ~ Madrid.

  • Can Transport  Visual Admin Settings and Configuration?

    Hi all,
    I'm using EP 7.0 and SP13. Due to reinstallation of  our server  i need to export all the configuration setting of Visual Admin.
    Exported all the visual Admin configuration by using Tool-->Export.
    while exporting the corresponding zip file automatic stored in the server path C:\usr\sap\Server Instance No\JC00\j2ee\admin\J2EE Engine Configuration.zip
    But i dont know how and where to import the J2EE Engine Configuration.zip again into server .
    what can i do..
    Regards
    Thillai J

    Thillai J
    This question is marked both answered and u2018not solvedu2019.
    In case you are still looking for an answer, Config Tool Export and Import should be used instead of Visual Admin.
    Hope this helps.
    PJ

  • How can I get the apple configurator to retain a devices settings and apps?

    Hi there all!
    I have an iPhone that already has apps and email settings on it.  I want to use the configurator to stop the device being paired with anything else not allow it to connect to any other Macs.  I've connected it, backed it up, enabled supervision, then deployed the profile.  Through out all of this I never get the option to restore device settings and when I click on edit stored backups, it contains nothing.  With supervsion disabled I can restore the backup but, snag is to disallow pairing it needs to be supervised.
    Also, am I right in thinking that once it's supervised I can't install any apps directly from the device ?
    Sorry if these are really noddy questions :-)  I just want to stop the device from being able to connect to or pair with anything other than my mac.
    Thanks
    Will

    Jpegs can't have transparent areas. Most likely you had layers and were forced to save "as a copy", which means that the image which remains open in PSE is not the jpg. A file saved as a copy makes a copy in the save format, but it's not like save as where you now see the newly saved version instead of the original. The original remains open and unsaved onscreen.

  • I seem to have lost some of my settings and now I cannot configure my airport connection. How do I get my settings back?

    Hello. First time using this. Still trying to figure out how to post my questions. I seem to have lost some of my settings and now I cannot configure my airport connection. How do I get my settings back?

    If you are using cable and a Nethear router sounds like from the information you provide before your Airport setting are setup improperly. PPoE is not something a cable service would need to work. Fallow the steps I will provide bellow, I will add some screen shots also to assist if necessary.
    1 - Open System Preferences from  (Menu)
    2 - Click "Network"
    3 - From the Network window you are going to wanna make sure Location is : Automatic and Show is : Airport
    4 - Once the Show: Airport is select you should see a window like this, my window is selected for Ethernet simply because I am no longer running Tiger but the window will look the same.
    5 - You will want to click on the PPPoE tab and you should see this
    6 - You're gonna wanna make sure " connection using PPPoE " is not select, if it is make sure to uncheck this option
    7 - Once this is uncheck make sure to click "Apply Now"
    8 - You will want to click back on to the "TCP/IP" tab and make sure IPv4 is set to " Using DHCP "
    9 - If the option to " Apply Now" is available again please click this
    10 - Once this is done go to your Aiport Menu and see if your network is listed and select your network and eneter the password if necessary.
    11 - If after these steps you still have issues I would recommend Power Cylcing your Router and Modem for about 5 minutes
    12 - Make sure all lights are off when unplugging the Router and the Modem
    13 - Some Modems have backup batterys so you may have to push in a tiny button on the back with a pin

  • Browser is not allowing sign in to excite web page. it says my settings are configured to disable cookies and/or javascript. please help

    i just got firefox 4.0, and i tried to simply sign in to myexcite.com, but instead the message "the browser you're using is not allowing you to sign in to Excite. Right now , your browser's settings are configured to disable cookies and/or javascript..."
    Please Help. I am new to Firefox 4.0

    First, create a specific [[Managing profiles|profile]] for Firefox 4.0b8 to prevent interferences between current (Firefox 3.6) and beta (Firefox 4.0b8) versions.
    Then, see [[Cannot log in to websites]].

  • TS3999 when I click on my iCloud panel, Calendars, I get an error message that says, Setup can't continue because Outlook isn't configured t have a default profile.  Check you Outlook settings and try again."  How do I set up these settings in Outlook 200

    when I click on my iCloud panel, Calendars, I get an error message that says, Setup can't continue because Outlook isn't configured t have a default profile.  Check you Outlook settings and try again."  How do I set up these settings in Outlook 2007

    Here are two threads you may want to review. I'm sure there are others. Good luck!
    https://discussions.apple.com/thread/3427840?start=0&tstart=0
    http://www.slipstick.com/outlook/icloud-outlook-problems-syncing-calendar/

  • I am trying to use sync outlook 2013 with icloud and am receiving this error - Setup can't continue because Outlook isn't configured to have a default profile.  Check your Outlook settings and try again - can anyone help me out

    i am trying to sync outlook 2013 with icloud and am receiving this error - Setup can't continue because Outlook isn't configured to have a default profile.  Check your Outlook settings and try again - can anyone help me out

    Here are two threads you may want to review. I'm sure there are others. Good luck!
    https://discussions.apple.com/thread/3427840?start=0&tstart=0
    http://www.slipstick.com/outlook/icloud-outlook-problems-syncing-calendar/

  • Documentation and configuration settings

    Hi Experts,
    Can any one provide documentation and configuration settings  for the following areas.
    Planning and budget,
    PC Industrial,
    Standard Cost Calculation,
    Production Variance Analysis
    Regards
    Balu

    HI Madhu
    I have sent you the Io & Pctr documents to ur mail id. Plz assign points if its helpful.
    Regards
    Rajaram

  • Migration of files,programs and configuration settings from Powerbook G4

    How does one move files, programs and configuration settings from a G4 Powerbook running OSX 10.4.11 to a late 2008 unibody Macbook since there is no firewire capability to use for a target disk.

    If you previously created an user account on the MacBook, open the Users folder, find the folder you migrated, drag it to the desktop, authenticate yourself if needed, and then move the files from the folder on the desktop to the corresponding locations in your home folder.
    (30421)

  • Need quick TIP: remove "Copy access and configuration settings" from added package

    I added a modified package in APPVMAN with the option "Copy access and configuration settings".
    Package is unpublished. But shows AD groups as a current package because I used the option "Copy access and configuration settings"
    QUESTION:
    How to Remove (and then add) the option "Copy access and configuration settings" from added package.
    Cannot find it.
    Thanks.
    --- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

    sorry for the panic :)
    before publishing an updated package to existing groups of initial package I hit the option
    "Copy access and configuration settings".
    But first I wanted to test it for TEST group. Didn't think that AD settings will be applied (do it first time).
    Just to confirm:
    1. I will remove current groups from updated(unpublished package)
    2. Will add Test group and test the package.
    3  In case it is OK I can then add removed(needed) groups.
    I want to be sure that after removing and adding needed groups all other settings will be intact.
    Thanks.
    --- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

  • How do I remove All OS X Server data and configuration settings

    My server app crashed and I deleted the app using app cleaner and removed the server file from the Library folder, owever when I try to reinstall the setup defults to the setting from the initial install.  Is there a way to remove all the stored data, profiles and OD included) as well as any configuration settings, such as those for AEBS and host name and ip address.  Essentially, I would like to perform an install that is the same as the initial, a truly cela install.  I am using a Mac Mini 2013 model as the server and MBP 15" as the main client.

    Completely clean install?  Wipe and install OS X, and then reload Server.app and configure that.
    Might want to report the error to the App Cleaner folks, too.

Maybe you are looking for