PS has moved error in Launching PSCS4

when first launching ps cs4 i get an error message that 'PS, application has moved. this application hes been moved from the location in which it was originally installed. some setings need to be repaired.' giving me the choice of canceling or repairing now.
it doesn't seem to effect the operation of ps which button i chose canel or repair. because the next time i use the computer the same diagloge box open when launching.
what's going on here and how do i fix it?
running mac pro tower 2.93 GHz Quad core Intel Xeon, OSX 10.6.2
jene

Please see if these docs help.
Launch Plan for an existing plan in instance upgraded to 12.1.2 gives NullPointerException [ID 1187736.1]
Mscscpps Fails With Ora-00001 Msc_int_operation_bor when alternate resources exist [ID 563846.1]
Thanks,
Hussein

Similar Messages

'ttaexecpe_pid:9730_75' has rejected" Error while launching ssh from webtop

Hi All,
I receive the below error message when I launch the SSH application from the webtop.But other application like RDP works fine. We use SGD v4.31 and tectia for SSH.
Can anybody please advice ASAP , what need to be done ?
2008/09/17 14:24:43.546 (pid 19623) pem/launch #242
Sun Secure Global Desktop Software(4.31) ERROR:
Protocol engine 'ttaexecpe_pid:9730_75' has rejected the request, error: ErrInvalid
The current launch has failed.
If the problem persists, restart the server.
Thanks and Regards,
Sudhakar

That too bothers me, however it's certainly not random when ssh publickey auth works. Something, somewhere, is blocking authentication. When it works is before that process has a chance to intercept ... the authentication mechanisms of sshd? I don't know.
Booting in safe mode results in the same.
I've rarely used the "format and reinstall" approach to fixing problems. I'd like to think myself fairly adept at diagnosing, researching and repairing complex issues, but I think this might be the time that a format and reinstallation might be the most logical choice.

ITunes downloads but has dep error on launch then shuts down

Hello,
Computer specs are
HP dv7 pavillion 145ca running vista premium 64bit. Enough hard drive space to choke an elephant. Required 4gigs of ram. Current version of norton anti virus spyware loaded.
The issue!!
Downloaded the new verssion 10.6.3 of iTunes from the iTunes website. When opening I receiving an unexpected error and the program stops then gives me a dep compatible error.
Solutions tried.
Updates for apple downloads has been repaired and tried
Turn on dep for all applications(vista will not let me deselect iTunes and add to the list
Removed QuickTime and reinstalled... Several times
Removed iTunes and reinstalled.... Several times
Dos prompt To remove lsa.
And some others that I can't think if right now.
If some one from apple support is reading this I would greatly appreciate some help on how to install and run iTunes... Right now I cannot access computer to update one of the numerous mobile apple products that I own.
2 iPod touch
2 ipad2gen
1 iPhone 4
And soon to be 1 phone4s if I can get iTunes loaded onto my computer.
Regards
Chuck

So people viewed this, obviously there is a problem with iTunes 10.6.3 but no one has a solution? Not even apple support?

Error " the document has moved "

on updated mozilla firefox 25 i go to my yahoo home page, every other thing i click on sending me to new page, ends up with error at top left, blank white page, says: the document has moved.
then i am forced to click on the link to go to page, so its an extra step i did not have to do until i updated, seems something is wrong with mozilla, does not happen in explorer.
i have windows 7 home premium on lenovo laptop

You're welcome.
Thanks for reporting which extension caused it.

Photoshop CS6 Application Moved error

Today I have started getting an error message that Photoshop has moved. I only get this message if Photoshop is not running and I right-click on something and choose to Open With Photoshop.
If I launch Photoshop first and then right-click open with photoshop everything is fine. If the Application really had moved then shouldn't Photoshop complain when I double click on it in the Finder or open it through spotlight?
I have read some other threads and it seems their problem was caused by migrating Photoshop from another Mac. That is not my case. Photoshop was working fine last week. No changes over the weekend.
Ideas?

Sounds like you have 2 copies for some reason.
You need to find and remove that second copy.

LICENSE MISMATCH error on launch

I'm receiving the following error on launch of Here Drive Beta:
    LICENSE MISMATCH
    Your navigation license isn't valid in this country or area
    MCC=208
Here Drive was functioning perfectly for me in the US. I have TMobile HTC 8x. I recently moved to France, when I first tried to use the app it launched but gave me an error about not being able to perform navigation (which is expected based on the license from Nokia).
I've unlocked my phone and I'm on a French carrier (Free). I've uninstalled and reinstalled the app but I'm getting this error each time I try to use the app. From what I understand, the Here Drive Beta license allows me to use the app in the same country as my SIM. Since both are France this should work but for some reason it's failing. Any suggestions as to how to troubleshoot or fix this?
I really like the app and want to be able to use it here for navigation so I'd really like to get this fixed. I'm happy to pay for the upgrade to Drive+ if that is an alternative option.
Thanks in advance for your help.
Solved!
Go to Solution.

Hi HighSpeed,
Welcome to the Nokia Support Discussions!
Here Drive application uses a regional license which is based on the first SIM card (MCC) you have used to activate the service. In your case, you have used a US based SIM card and currently trying to use the service in France, correct? US and France has different MCCs, which explains the reason why you are getting that code. Even if you uninstall the app, the data is still stored on the phone. If you want to use the service in France, your only option is to reset the phone.
Hope this info helps.

I get this error upon launching PS5: "could not open a scratch file because the file is locked .."

I get this error upon launching PS5: "could not open a scratch file because the file is locked or ou do not have the necessary access privileges. Use the 'properties' command in the Windows Explorer to unlock the file". The applicaiton will not launch.
Supporting information - I recently changed the scratch disk from C drive to D drive (the back up/restore drive). The application wont launch so I cant change it back to the C drive.
Questions:
- How to I fix this .. from windows explorer how do I find "the file" that the error message refers to?
- Other ways to fix this?
Thanks Steve

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!

I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!

Hey socestlavie,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.

Please help me. I am getting an error while launching an web start applic

I am getting the following error while launching an java web start apllication.
Exception in thread"javaWSApplicationMains"java.lan.NoClassDefFound:SimpleSerial.
The jnlp file i have used is as follows:
<?xml version="1.0" encoding="utf-8"?>

<jnlp spec="1.0+" codebase="http://zycomm:8080" href="Aeon.jnlp">
<information>
<title>Aeon HHBM Manager</title>
<vendor>ME</vendor>
<description>Aeon HHBM Manager</description>
</information>
<offline_allowed/>
<resources>
<j2se version="1.4+"/>
<jar href="aeon.jar"/>
</resources>
<application-desc main-class="Aeon_PManager" />
<component-desc/>
</jnlp>
The java code is as follows:
SimpleSerial.java
import java.io.*;
//import java.lang.*;
//import java.lang.ClassNotFoundException;
Interface class for SimpleSerial.
If you don't know what an interface is, don't worry. An interface defines the functions
that can be called by implementors of this class. Currently there are two implementors,
SimpleSerialNative, and SimpleSerialJava. There might be more in the future.
SimpleSerialNative requires the file "SimpleSerialNative.dll" to be in the same folder as your Java
project file. It's that simple.
SimpleSerialJava requires the correct installation of Sun's Javacomm communication package. It's much
more powerful, but it can be tricky for the newcomer to configure, and use.
If you have problems with one, why don't you try the other.
A VERY SIMPLE IMPLEMENTATION:
public static void main(String args[]) {
SimpleSerial ss; // delcare the SimpleSerial object
ss = new SimpleSerialNative(2); // The argument is the commport number. There is no Comm0.
ss.writeByte((byte)'a'); // write a byte to the serial port
// Give the PIC chip time to digest the byte to make sure it's ready for the next byte.
try { Thread.sleep(1); } catch (InterruptedException e) {}
ss.writeByte((byte)'!'); // write another byte to the serial port
String inputString = ss.readString(); // read any string from the serial port
System.out.println("I read the string: " + inputString);
A few important things to note:
1. When you write data to the serial port, it just writes the data, whether or not the PIC chip is
ready to receive data. There's no handshaking or signaling. If you send data and the PIC chip
isn't ready for it, it will be ignored. Some PIC chips have a hardware UART which will buffer a
few bytes of data for later retrieval. But this isn't a cure-all. If the buffer fills up, it
creates an error condition which prevents further data from being read. You need to include
custom PIC code to reset the error flag.
2 In contrast to the PIC chip, the computer has a rather large hardware buffer. If the PIC chip
sends serial data to your computer when you're not around to read it, it gets stored.
3. If you make a call to readByte(), and there's no data to be read, readByte() waits until there
is data. If you want to know how much data (if any) is available, make a call to available().
4. Conversely, if you make a call to readBytes() or readString() and there's no data to be read,
readBytes() returns a byte array of zero length, and readString() returns and empty string.
5. If you want to use Sun's JavaComm package instead of this code, subsitute your calls to
new SimpleSerialNative(2);
with
new SImpleSerialJava(2);
public interface SimpleSerial {
// These are copied right out of WINBASE.H
// Most applications should be fine with the defaults.
public static final int NOPARITY = 0;
public static final int ODDPARITY = 1;
public static final int EVENPARITY = 2;
public static final int MARKPARITY = 3;
public static final int SPACEPARITY = 4;
public static final int ONESTOPBIT = 0;
public static final int ONE5STOPBITS = 1;
public static final int TWOSTOPBITS = 2;
Returns the number of bytes available at the time of this call.
It's possible there are more bytes by the time readByte() or
readBytes() is executed. But there will never be fewer.
public int available();
public void waitForData(int n);
public boolean writeString(String string);
returns TRUE if port is fully operationsal
returns FALSE if there is a problem with the port
public boolean isValid();
Be sure to close your serial port when done. Note that port is
automatically closed on exit if you don't close it yourself
public void close();
Reads a single byte from the input stream.
Return value will be from -128 to 127 (inclusive)
If no data at serial port, waits in routine for data to arrive.
Use available() to check how much data is available.
If error, returns 256.
public int readByte();
Reads all the bytes in the serial port.
If no bytes availble, returns array with zero elements.
Never waits for data to arrive
public byte[] readBytes();
Reads bytes from serial port and converts to a text string.
DO NOT use this routine to read data. Char->Byte converstion
does strange things when the values are negative. For non-
text values, use readBytes() above
public String readString();
Writes a single byte to the serial port.
This writes the data, whether the PIC is ready to receive or not.
Be careful not to overwhelm the PIC chip with data.
On pics without a hardware UART, the data will be ignored.
On pics with a hardware UART, overflowing will loose data AND require
the UART on the PIC to be reset. You can reset the UART in PIC code,
or manually turn the PIC off and then on.
NOTE: A byte has a value in the range of -128 to 127
NOTE: If you want to write a character, you need to cast it to a byte,
for example: simpleSerial.writeByte((char)'b');
public boolean writeByte(byte val);
For more advanced use. Gets the input stream associated with serial port
public InputStream getInputStream();
For more advanced use. Gets the output stream associated with serial port
public OutputStream getOutputStream();
Please help I am the beginner in web start.Please

Notes:
1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

For many of us there is an error when launching iTunes 9 - try this first.

If you are among the many that has the error about a dll file not found, you might want to look at this thread and try the reccomended fix (installing an update to directX).
http://discussions.apple.com/message.jspa?messageID=10400226#10400226
But BEFORE you do, make sure you aren't already using a version of directX that is higher than that shown (click start, run, and type dxdiag then enter. this is the directX diagnostic tool built into Windows.). The link in that thread is to Microsoft's download page for updating directX9.0c and all PREVIOUS versions.
However, if you're in any way like me, and have been maintaining your computer somewhat diligently, you are already using directX version 10. This fix probably doesn't apply in this situation, and needs further analysis from both Microsoft and Apple.
Good luck! Post your results, please, so that we can all benefit and resolve this annoying error!
Message was edited by: Dusty-[dirtycar74] (I forgot to insert the link (Duh!))

Perform a hard reset on your iPhone (press the Home button and the Sleep to screen off)
Connect the USB cable to your iPhone and launch iTunes
It's time to position your iPhone into DFU mode (Device Firmware Update) how: Press the Home button and the Sleep for 10 seconds (remember 10 seconds!), After ten seconds, release the sleep button and press and hold the Home button for 10 seconds (if you do it all correctly and the time is right) then it will display a message from iTunes like this.
If you do not get a message like that, repeat step 3, until you get a message like the above on your iTunes.
After step 3 successfully, iTunes will start restoring your iPhone firmware to its default alias originis firmware
After the restore process is complete, your iPhone will reboots and if your iPhone is connected to iTunes, so flame, iTunes will offer the iPhone restore from backup that you created (which will restore the contacts, music, video, photo, and application), if you previously never backed up your iPhone, you should select this option.
The process of backing up restore your iPhone will take approximately 2 to 3 hours, so you should be patient.
Once completed, iTunes will inform you and your iPhone will reboot again
The next process, sync your iPhone your iTunes, if the iPhone has been running with the normal synchronization process would not be a problem.
Congratulations, your iPhone is running normally again.

Media Encoder crash in CS6. Could not read from the source. Check if it has moved or been deleted.

I'm having a problem getting Media Encoder to get past the dynamic link portion of encoding a time line sequence.
I can send it over to Media Encoder, but it crashes consistently after the yellow bar saying something about dynamic link.
I have CS6 installed in my computer here at work, it previously had CS5.5 installed on it.
I read some answers about CS4 having this problem and tried to create a shortcut and put it in the dynamic link folder, but that didnt work.
I would hate to have to reinstall the software here at work as the IT department is a pain- but I can't encode video on one of the computers we use here.
Any ideas on what may be happening and how I can solve the problem?
Thanks!
Its a Dell Workstation with Windows 7 Ultimate installed dualE5620 processors at 2.4GHz. .
only 6 GB RAM, and a RAID 5 hard drive setup with 3- one gb drives giving the C drive space of 1.8Gigs
Its got an NVIDIA Quadro NVS 420 video card.
I'm upgrading this computer to better work with editing video, so this is a good time to get this all cleaned up.
Im adding RAM (24GBs)- replacing the video card to a GTX 780 3GB running 3 monitors.
I'd also like to either split up the RAID (ugh)..or just add 2 internal SAS HDDs. to split up the video and the cache and the OS/programs as is usually done with editing video.
Thanks for your help in advance...
Mike

...more information...problem still not solved....
After searching more in the forums, I tried a couple more things:
I tried to restart AME and clearing the preferences. This didnt help.
I also deleted the ...appData/Roaming/Adobe/AdobeMediaEncoder/6.0 folder and all subfolders No help here either.
I also tried to import the sequence via AME rather than export via PP. This worked. The sequence loaded immediately and processed perfectly.
When I export via PP, I hit the queue button, it hangs for about 3 mins, then the yellow bar appears saying "Connecting to Dynamic Link server"
it then hangs for approx 3 mins again and then I get the Failed alert.
the error log reports:
Encoding failed
Could not read from source. Please check if it has moved or been deleted.
any help available here????

Error when launching Crystal XIR2 report ..."Table could not be found."

We have a customer that sees an error when launching any report in InfoView for Crystal Server XIR2:
Description: Error in File E:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\slvnsb41.pageserver\slvnsb41.pageserver\child.2\temp\procReportTemp\mgrTemp\ps_13ec5b68e6bfbc0.rpt: The table could not be found.
These steps have been taken:
1) The Crystal Server Business View install and BIAR file imports are successful.
2) Database connection has been configured and tested.
3) All the tables are browseable in the Business View Manager and contain data.
4) All the required tables exist in the database.
Options or suggestions anyone?

Can someone tell me how to open this as a SUPPORT CASE that someone will actually help solve?
Sorry to say but I don't find these forums of much use.

Error when launching Acrobat XI Pro

I get an error when launching Acrobat XI Pro:
Adobe License Utility has stopped working.
A problem has caused the program to stop working
correctly. Please close the program.

Hi toeneez,
Please try repairing Acrobat and check.
Try running the licensing fix patch available at : Error 213:19 | Problem has occurred with the licensing of this product | Acrobat X and XI
Regards,
Rave

Could not read from the source. Please check if it has moved or been deleted

hi all,
when i try to render a afx project from media encoder i get the following message
"Could not read from the source. Please check if it has moved or been deleted"
i've read on the forum that this is due to an old installation of Premiere.
I'm using a brand new computer. the only software installed is my cs5 master collection and the updates from adobe website.
win7 pro
i7
16 gig ram
cheers
s

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
Steps to reproduce bug:
1. i export anything by button "queue" from premiere to Encoder
2. Encoder will start encoding
3. Encoder does not show the window of media encoding (down left )
Results: sound of sheep occur,
in encoding error file is this reason of canceling the encoding :
01/02/2014 10:10:48 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

After Effects Plugin Error when launching

I recently installed Red Giant Knoll Light Magic Pro plugin and get the following error when launching AE CS4 9.02 on a 2.53Ghz Intel Macbook Pro with 4Gb Ram and Snow Leopard.
After Effects has encountered an error.
[/Chincillada/pro/ext/adobe/MediaCore/MediaLayer/VideoFilterHost/Make/Mac/../../Src/AEPlug inVideoFilterModule.cpp-107]
then I get:
After Effects can't continue: An output contract violation has occured!
then:
After Effects warning: Failed to initialize mediacore
I have also lodged a support ticket with Red Giant but wanted to see if anyone had experienced, or could shed any light on this error code.
Thanks

As a start, move the KLF plug-in out of the shared MediaCore folder (Library:Apllication Support:Adobe and something; not on my Mac ATM) to the conventional AE plug-in folder (Applications:Adobe After Effects CS4:Support Files:Plug-Ins) I've reminded my friends at RG a hundred times, but their installer stil luses bad default locations. If that doesn't fix it, then indeed you have a problem. Which version of the plug-in are you using? Most complaints revolve around v2.5's GPU usage, which is on by default and causes a lot of trouble. Older versions do not do this, so they are more stable....
Mylenium

PS has moved error in Launching PSCS4

Similar Messages

Maybe you are looking for