PS in CS3 will not open, even as admin, all other programs work, and PS did until recently. W7-64

All other programs in CS3 work just fine. I got PS to open last week when I got this probem, by right clicking and selecting "run as administrator".
I have run a "repair" through install programs in the control panel. there was an error that some shared components did not install properly, (I only repaired PS, not the other program)
I have made sure windows drivers are up to date.
Turned off anti-virus when repairing install
Turned off anti-virus when trying to open
Googled and searched on web - found nothing other than run as admin - which I did - and it did not work.
Error message: Windows cannot access the specified device, path, or file. You may not have the appropriate permission to access them.
I am not a geek, but would appreciate any help, since this program has worked on W7 un until recently, and last week I got it to open by "run as administrator", but alas, that does not work today.
NANCY. Thanks to any for assistance.

You need to fix the permissions on whatever "device, path or file" this erro message points to. This could be anything from trying to load a plug-in, access a device driver (printer, scanner, tablet etc.) to color profiles to your Photoshop scratch file. Impossible to tell. Check your Event Viewer. Perhaps there's some clue there...
Mylenium

Similar Messages

CS4 will not open NEF files. I installed DNG converter and it did not help.

CS4 will not open NEF files. I installed DNG converter and it did not help. Also, I tried to just "update" photoshop and it did not work. It is a new camera (Nikon 1).

Yes, you need CS6. DNG Converter is just a standalone tool to convert RAW to DNG files which then may be possible to open in older versions of Adobe tools.
Mylenium

Itunes will not open on computer says it has stopped working and it must be closed. My computer tells me its an incompatible app. Is there a problem with the new itunes or is it my computer?

I have recently downloaded the new itunes. My computer will open itunes but then a screen pops up that says Itunes has stopped working and must close. This happens every time and i can not by pass it. I am afraid all my music is gone as well. I found on my computer that its an incompatible app. What does that mean exactly? Was itunes installed incorrectly? I have had itunes on my computer before and worked just fine and had no problems. Is it possibly a computer issue or Itunes? Need help thanks

Not completely sure. But if you think it is an iTunes issue...... follow through this: Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
ALSO, if you feel like all your music will be gone as well follow through these 2:
> Downloading past purchases from App Store, iBookstore, and iTunes Store
> How to use your iPod to move your music to a new computer
IF YOU THINK ITS A COMPUTER ISSUE, RESTART YOUR COMPUTER BEFORE DOING ALL THIS.

After upgrading to 6.0 firefox will not open ant websites at all, while my other browsers work correctly: help, please

i run windows 7 on a sony y series. before upgrading to 6.0 firefox worked seamlessly. now it will not open any websites at all. i have uninstalled and reinstalled it to no avail. thoughts? help? ...

I will be using IE9 until this is fixed. Perhaps for good!!

Adobe Premiere CS3 will not open!

Adobe premiere CS3 will not open. When I click on the Adobe icon on my desktop, I get this message: This application has failed to start because prm.dll was not found. I've tried several things such as: uninstalling the program then reinstalliing it. I tried to open Adobe by clicking on one of my projects by opening MY Computer from start on the taskbar, then click on c drive, etc. but it will not open. Before I started getting the error message stated above, when I clicked on the icon, the program would load to the point of showing the top portion of the page (file, edit, etc.) then stop. It would never fully load. HELP!!!!! I'm in the middle of trying to meet several deadlines.

First, search your system for every instance of prm.dll. See if you have one (could be corrupt, but a Repair Install should have repaired it) in your PrPro CS3 folder hierarchy. Do you have any more? How do the dates and sizes compare to the one, if there is one, in PrPro? Here is a LINK to a .dll site. I do not know this site, so cannot even comment on their .dll's. I'd do the first suggestion, well - first.
Also, I do not know this .dll. It could be a VST from an Audio editing program, or similar. Some of these have been known to bring PrPro to its knees, at launch. Might be worthwhile to check into it a bit more.
Also, take a look at Event Viewer. This ARTICLE will give you some tips on what to look for. Could be more happening, than the error message might lead one to believe.
Good luck,
Hunt

Photoshop CC with CS3 will not open Nikon NEF files for the D610.[was:CC]

Photoshop CC with CS3 will not open Nikon NEF files for the D610. Is there a fix for this? Fast Eddy

I assume you're running Photoshop CC (not sure what you mean by "with CS3" unless that's the version you upgraded to CC from)
Download Camera Raw 8.3RC
http://labs.adobe.com/technologies/cameraraw8-3-cc/?tabID=details#tabTop

InDesign CS3 will not open

WinXPsp3 - Dell GX620 1 GB Ram - InDesign CS3 v5.0.4
Welcome window - starting up, executing, Initializing, Completing
Then Error window
Adobe InDesign CS3: InDesign.exe - Bad Image
The application or DLL C:\Program Files\Adobe\Adobe InDesign CS3\Plug-ins\DICTIONARIES\LILO\LILO.APLN is not a valid Windows image. Please check this against your installation diskette.
CS3 has worked for 2 years so why and how to fix.
Thankyou J.

I did a system restore on my system (Windows XP Pro) and cannot open Indesign CS3. When I tried the following error message appeared:
"The licensing subsystem has failed catastrophically. You must reinstall or call customer support."
I tried some of the suggestions here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402004
Indesign CS3 will not open so I cannot deactivate. The instructions say if you have an entire Suite installed, then you only need to deactivate from one application. But I cannot find deactivate anywhere in the other apps. Without deactivating, I cannot uninstall to reinstall.
There was no FLEXnet Licensing Service showing in services.
I tried renaming the FlexNet folder.
tried moving the cache.db file.
After trying these suggestions I now get the error:
"You cannot use this product at this time. You must repair the problem by uninstalling and then reinstall this product or contact Adobe customer support for help."
What next?

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

You're welcome.
But, no, don't look to Epson for fixes to their driver in newer versions, and Adobe has deprecated the TWAIN plug-in. Hoping for a solution there is futile. That has not happened and it's never going to happen. The consensus is that it's pretty foolish to tie up Photoshop to scan. Honestly.
Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever. When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software. If you think about it, its most inefficient.
VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist. VueScan is not free, but it's a pretty good value, IMO.
As for the Epson CD printing software, I have no clue. Sorry.

Safari will not open, even after reboot

I have been having all sorts of problems with my iMac since installing Mavericks (Gmail integration was freezing everything, Maps just didn't work).
The latest is that Safari just will not open, period. I have rebooted several times and even reinstalled OS X via the Cmd+R on reboot, nothing. It hangs upon opening and needs a Force Quit. When restarting again, it asks if you want to reopen windows and it makes no difference if you say Yes or No.
Any ideas on what to do?

Try deleting the com.apple.Safari.plist
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/com.apple.Safari.plist. Move the .plist to your desktop.
Open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
Thanks to leonie for some information contained in this.
You might need to redo the View settings after an update.

App will not open even after reinstallation

How do I resolve this? Reinstalled multiple times, tried shuttting iPad down, is it a settings issue?? Running iOS 5.1.1 still, is that the issue?

I'm sorry to hear that you have trouble running
PS Touch. Please try to install via iTunes. This normaly helps.
-Guido
Am 02.02.2013 um 06:34 schrieb "seankelleher" <[email protected]<mailto:[email protected]>>:
Re: App will not open even after reinstallation
created by seankelleher<http://forums.adobe.com/people/seankelleher> in Adobe Photoshop Touch - View the full discussion<http://forums.adobe.com/message/5041972#5041972

My ipod will not open even after following instructions online

my ipod will not open even after following instructions online

Do you mean you can't unlock it?
We have no way of knowing exactly which online instructions you may have tried.
Apple - Support - iPod touch - iPod touch Troubleshooting Assistant
iPod touch: Hardware troubleshooting

My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. What should I do?

My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recoverymode use one of these programs.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When clicking on a link within my Outlook Express, it will not open to the website. This has worked flawlessly in the past. What has changed? Thank you.

When working in Outlook Express and attempting to click on a link in my email, it will not open the website any more. This worked flawlessly before last week and now has stopped working. Please advise.

Hi mcsimmons,
First thing I would do is check [[How to make Firefox the default browser|to see if Firefox is your default browser]]. You could also go to ''Start > Control Panel > Internet Options > Programs Tab'' on your computer and make Firefox the default web browser that way.
Hopefully this helps!

I installed 4.0 and now firefox will not open, though it is running, I have uninstalled and re-installed and it still will not open?

I installed 4.0 and now firefox will not open, though it is running, I have uninstalled and re-installed and it still will not open. Not sure why this is happening

If you use ZoneAlarm Extreme Security then try to disable Virtualization.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]]

Hi, App Store tells me I have installed the latest Pages update, yet it will not open Pages docs created on other machines that DO have the latest version . Any tips?

Hi, App Store tells me I have installed the latest Pages update, yet it will not open Pages docs created on other machines that DO have the latest version . Any tips?

Hi
Pages 5.0 and 10.9.
While App Store tells me there is no update avalable to Pages, which it says was installed Nov. 4, its the old Avatar/logo thingo and, as I say, it will not open the Pages docs created on my MacBook, which definiitely does have the new Pages running smoothly.
cheers

PS in CS3 will not open, even as admin, all other programs work, and PS did until recently. W7-64

Similar Messages

Maybe you are looking for