 Ps installation on two different boot volumes of same machine?  Ps 11.0.2 Mac PPC  and then...

Hello, I'm new to this forum.
My goal here is to have two different Photoshop 11.0.2 installations on two different boot volumes of one and the same Power Mac (PPC) G5 Quad, one being a Tiger 10.4.11 system and the other one a Leopard 10.5.8 system, for the purpose of installing two different modalities of the same Epson Photo Stylus 2200 printer, one with the printer set to use the photo black ink cartridge for luster and glossy papers, and the other one using the matte blank ink.
This is because I prefer to simply change the startup disk when switching inks rather than having to delete and re-add the necessary printers. (This particular printer does not support ink cartridge switching under any version of Mac OS X.)
Photoshop is currently only used on this one machine. Obviously this intended scheme fits well within the EULA conditions.
My three questions are:
(a) whether there is any technical issue I have failed to consider,
(b) whether each copy of Photoshop on the same machine will have to be activated separately (in other words, is the activation tied to the CPU or to the boot volume drive?), and
(c) if the answer to the latter question is yes, whether this will count as one or two activations for purposes of later installing a single instance of the Photoshop 13.x ("CS6") upgrade on an Intel- MacBook, since obviously C6 will not run on my PPC Mac. Again in sum, will I be able to continue to run Photoshop 11.0.2 on two different volumes of the same PPC machine and the Photoshop 13.x upgrade on the laptop?
As further explanation, I would use Photoshop 13.x on the Mac-Intel laptop only in order to run ACR 7.x, but would keep my PPC G5 Quad as my photo editing and printing machine running Photoshop 11.0.2, since an upgrade of my desktop machine to a comparably powerful Mac Pro is simply not an option for both financial and technical reasons (the Classic environment is essential).
Any and all input and guidance will be appreciated.
Message was edited by: station_one

Thank you for the lightning-fast response—and on a Sunday morning too!
MichaelKazlow wrote:
…Is it technically a violation, that is something I'd leave Adobe to answer.
From my previous visits to other forums as a lurker, I was under the firm impression you were in fact an Adobe employee, Mr. Kazlow. I hope that is still the case and you are only referencing your participation in these user-to-user forums as a volunteer, not as an official representative of the corporation.
Much obliged.

Similar Messages

Two different projects in the same machine sharing some objects

Hello dear all
I got this scenario:
Same machine;
2 clients (70 and 80);
2 Projects
- AR Payment Process (prototype) for an existing company
- New company configuration
Coding Block (e.g.: for experiences in AR - prototype )
In the end - same Production machine
Projects running simultaneously
AR payment project (prototype) > New company configuration (in terms of duration)
Description
I got 2 projects running at the same time. At least somewhere in the time they will run simultaneously. One will consist in a new AR-Payment process for an existing company, and another one consisting in a creation of a new company.
So, Iu2019m afraid that those projects cannot run simultaneously once for payment process we will use coding block for sure.
We will have to change some standard tables (e.g. SPL Table) with different fields (two, to be more precise) u2026.. We do not have time to make one, and after another one, and then put them together and adjust it.
So, at this point Iu2019m not pretty sure about the direct influences, and in case of influence occur, what can be the solutions to avoid them.
Is there any way of controlling all the possible changes that will be made in the shared objects?
We really need to run these projects.
Thank you all in advance

The fastest way I can advice is...
1. edit your credits sequence (the clips you want to keep going as your credits roll)
2. nest the clips in a new sequence then you have a timeline with a nested sequence in your track 1...
3. Select your nested sequence in the track 1 and use the motion tab to scale/rotate/crop/move your image wherever you want in the canvas...
3. create a second track for your rolling credits...
4. create your rolling credits
5. if you have different clips for your rolling credits you may want to nest these too...
6. select your rolling credits and use the motion tab again to scale/crop/rotate/move your credits wherever you want in the canvas
Hope this help...

Sharing iMove Projects Libraries with different users on the same machine

I was wonder how two different users on the same machine can
share project libraries. Some Context:
My daughter has some finished projects in her project library and
I either want to import those project into my library or share them
so both user accounts can access the projects (similar to how the
event library is accessible)
Note: I've already moving the project library to a shared disk (the one
the event library is on) with no luck
Using iMove 09
tia...

You need to move each project to the external drive from within iMovie. Be sure to use command-drag so you move, not copy.

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details?

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details? (In order to be able to use the older applications no longer supported in 10.9)

If you want to add a second partition to the internal drive (in Disk Utility, select the drive, then open the partition tab and just click the + button), you should first be sure that you will have enough room to accommodate whatever the second volume will be. I am currently doing this for Snow and Mountain Lion.
To get to whatever volume is not the startup disk, restart and hold down option/alt at the chime, which will bring up a selection of the two volumes. Use the left or right arrow keys to select it and then hit enter/return.

I am trying to store music for two different iPods on the same computer, against two different Apple IDs. When I try and download content from the Cloud I get an error message?

I am trying to store music for two different iPods on the same Windows 8 computer, and when I try and download content from the Cloud I get an error message. Is it possible to have two different Apple IDs on the same computer?

Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

How can I interact between two different frames in the same indesign template as well as from one template to another.

I am looking for the best way (or any way) to interact between two different frames in the same indesign template as well as from one template to another. It's for a DPS app which needs to carry some button initiated data from one page to another and then present it in a table.

There is no simple way to do it, as itunes wont let you use it on another computer without wiping the contents first.
However if you really want to transfer songs to another computer then you could try this;
* make sure that your ipod is accessible as a disk drive (ipod options)
* when you plug your ipod into the computer you want to transfer to make sure you select "no" or "cancel" when it asks to wipe the contents. Leave the ipod connected and quit from itunes.
* go to "my computer" and access the ipod directly. You probably have to select "view hidden files" from windows. You will see a lot of folders with odd names like ZX838aff with similar named files inside.
* copy these files to a folder on your computers hardrive. Now remove the ipod and start itunes.
* import the files from the folder you made in the last step.
* Now your music is on itunes, but with unrecogisable names.
This is the only way I have found to do it, but there may be another way, say with an application to do the hard work for you.
Generic homebuild PC Windows XP
Generic homebuild PC Windows XP

How can i deploy two different versions of the same application on the same server??

I have two different versions of an application. One is a released version. And another version under development. I need to port this version of the application to the same server. I'm using the same classes and packages(except for some new ones). Is it sufficient if i change the name of my ear(application name). Or should i change my code also.

Hi
You can repackage the new versions of ear,jar and war with different names. I hope that should work well.
Cheers
-pradeep

HT201269 Can I set up two accounts for two different iPhones on the same iTunes account. Jimmy

Hello,
CanI set up two accounts for two different iPhones on the same iTunes account. Thanks JIMMY

http://support.apple.com/kb/ht1495
You can use the same apple id for two separate phoones to share apps/music, however you would need a separate apple id for both phone for imessage/facetime/icloud.

How do I sync two ipods with two different IDs on the same computer?

How do I sync two ipods with two different IDs on the same computer?

Simply connect them. One computer with one iTunes can manage multiple devices. They're tracked by S/N but you might wish to assign them unique names so that you can track them yourself.
The only minor issue is app updating and purchases while on the computer. It's necessary to log out and back in to the "correct" ID. Much easier to do these things from the iPods.

Can you run premiere pro on two different computers with the same log in?

can I install and buy adobe premiere pro and run it on two different computers. Got a desktop at home that I work from and a laptop to bring to clients... So far my trial only want to work on one of the assets?? Many thanks

Hi Dream5,
Please check the below forum discussion.
Creative Cloud multiple computers
Also, check this link for more information and errors.
Error "Activation limit reached" or "Sign in failed" | Adobe products
Regards,
Vinay

Two different itunes libraries on same computer

I hope someone can help me! How do i set up two different libraries on the same computer for two different ipods? My ipod is on a computer i no longer have and I'm trying to put it on a computer that has a different ipod on it. My ipod appears in Windows as (H) and not in itunes.
I've tried all the tips I found already with no luck!

if the computer cannot be turned on, one option would be to remove the hard drive and put it in an external enclosure that can be connected to the working computer.

I would like to import two different cf cards from two different cameras into the same project/folder and have them be in order of the times they were taken, is there a trick?

I would like to import two different cf cards from two different cameras into the same project/folder and have them be in the order of the times they were taken, any ideas on how to do this?

Just import them normally and sort the project by date. They will fall into place. If you tried this and it isn;t happening then make sure the data and times on the two cameras are identical and make sure you are sorting by date and time and nothing else.

Control two different parameters at the same time

Two motors were connected each other rigidly. One motor controlled torque and the other motor controlled speed. I generated some torque and speed data which represented one cycle of motion from a motor simulation. I like to send these two different data sets (torque and speed) to two different motors at the same time. Torque data sends to one motor and speed data sends to the other motor to see the response of the load profile. In order to do this, I thought about using multithread, but I am not sure it will work for this application. Usually multithreading delay the CPU time so the overall control process might be delayed, right? If you have better idea, please let me know.

If you are using one motion controller to control both motors, you will probably run into problems if you try to use multithreading on the PC. However, you can execute up to 10 programs (threads) at a time, in addition to host communication, using on-board programming. For more information on on-board programming please refer to the following tutorial: Developer Zone Tutorial: On-board Programming in FlexMotion
Best wishes!
Dawna P.
Applications Engineer
National Instruments

EP Implementation with two different CRM client on same EP environment

Hi All,
I have the following scenario
We want to use same EP instance for connecting to two different clients in ECC 6.0 system (say Client 100 and 200 ).
But we also want to use Single Sign On.
Then my problem is
1. When I am logging on to EP through URL it should directly Log on to master client (say Client 100) setup during the single sigh on.
2. But then if another user wants to connect to Client 200 how he will do that ?
Is connecting two different client from same system from Single EP instance is possible ?
Pls help me on that. It's very urgent.
Thanks and warm regards
Purnendu

Purnendu: as I mentioned in your duplicate thread. It is certainly possible to connect two different client of the same system - but you have to have two different iView and two different system objects from them. You can have a single role and two iVIews inside that one connecting to 100 & another to 200 client respectively.
Regards,
Shubhadip

Can we access two different Siebel BO in Same OPA Rule Base

Hi all,
can we access two different BO's from same rule base.
what i means is,can we pass siebel data to OPA Rule Base from two different BO's .
Thank you for your help in advance.

There are two approaches to do this and they both involve making some small changes on the Siebel side.
You can create an Integration Object which contains all the business components that you want to send to OPA if you are using an Integration Object mapping.
If you would prefer to use a Business Object mapping then you will have to create a new Business Object which combines the BCs of all the Business Objects that you want to send to OPA.
As you can see, although one approach involves Integration Objects and one involves Business Objects they both work by creating a single object which is an amalgamation of the information that you want to send to OPA.
Cheers
Frank

 Ps installation on two different boot volumes of same machine?  Ps 11.0.2 Mac PPC  and then...

Similar Messages

Maybe you are looking for