PS integration with Microsoft EPM

Hi,
My company is in the midst of integrating PS with Microsoft EPM solutions.
Is there anyone out there has experience in performing this integration?
We would like to hear your story and opinion as we don't have much experience on the integration part.
Would like to know whether the integration will work both ways between PS-EPM or it should only be done from PS-EPM only.
Appreciate your reply
Fadhil.

Hi Fadhil,
When trying to integrated SAP PS with EPM, i would advise an off the shelf product rather that developing a bespoke solution. TPG's PSLink is the world leading integration tool in this area, is SAP certified and offered bidirectional interfacing of data.
Regards,
Peter

Similar Messages

  • ECC 6.0 integration with Microsoft Dynamics CRM

    Hi All
    I am working on a ECC 6.0 integration with Microsoft Dynamics CRM. I need to send the customer master data, va01/va02, vl01n/vl02n/ vf01/vf02 to CRM system. One option I have is to send in the form of IDOC with TRFC - TCP/IP. But looks like this needs a middleware like Biztalk.
    Is there a way I can send this data using a Internet service in ECC 6.0 ??? As this would cut the cost of the Biztalk.
    I really appriciate your thoughts on this. We don't have XI either.
    Thanks a lot
    Van

    HI Van Dan Jan,
    We have just implemented integarion of SAP with Microsoft stack (Microsoft CRM, Share point and Axapta), But in all integration BizTalk as a middleware used.
    There is two way requirements :
    1. whenever Most of the control are at the Microsoft level like : Customer creation, Creation of orders, which need to be synchronus activity we have used RFC which internally calls BAPI. (So SAP adapter Configured at BizTalk). and whenever Biztalk receives request file from CRM or share point to there location they call SAP RFC's.
    2. When DATA is needed from SAP to microsoft stack like to syncronize the missing transaction like customer pad and all.
    Scheduled job at BizTalk end which call SAP to get the DATA via RFC mode :
    In SAP we have two things
    1.  if DATA size is small (below 2 MB) like  in last 1 hrs what are the sales contract created in SAP that need to updated in Microsoft other system than Biztalk will trigger a job at 1 hr interval or on deemand to get the detail which directly we pick from data base or using BAPI to get the detail via RFC.
    2. If Data Size is large (more than 2 MB)  like total transation happened in a day for all customers: then we wriiting the data in OS or application server  and that job also get initiated from Biztalk end by sending any parameter to SAP.
    advantage of using BizTalk is most of the control you can give it to them so they can run there job on deemand basis.
    There is a something known as web service we can use to avoid Interfacing tool, but I dont have much Idea about that,
    and  please check how many interfacing point is there with SAP in your project, because if Interfacing points are more then I think it is not good to write a web services for so many things.
    do let me know if you need further information.

  • SAP Workflow integrated with Microsoft Outlook

    Hello All,
    I have the following question. When an work item comes in the SBWP inbox, as soon as the work item is executed by the user
    the workitem disappears from the SBWP. Now my question is if SAP Workflow is integrated with Microsoft Outlook (so that email containing the work item as a link reaches Outlook), is there a way to make the email disappear from the Outlook as soon as the SAP work item is completed.
    Can someone throw some light on the same.
    Thanks,
    Sachin

    Hi,
    Duet workflow scenario is available. SAP Application sends workitem to Duet Server and Outlook client has Duet add-in. You need Duet Server and user license.
    Also SAP MAPI Service Provider is available. You can access SAP Inbox items from your outlook client. I think SAP MAPI Service provider is free.
    Regards,
    Masa

  • DPM integration with Microsoft Azure backup queries

    Hi All,
    We have made the test set-up environment with installed the below details
    DPM 2012 R2 on VM (Windows 2012 R2)
    We are using a raw disk of 200 GB for disk staging.
    DPM integrated with microsoft azure.
    Able to take file backup and databases backups from DPM and can perform the restore from Disk staging as well as from azure
    Queries:
    Will DPM support deduplication for exchange (2007,2010,2013) databases and for sql databases (2000, 2005,2008,2012,2014) ?
    on the wire compression is enabled but how to verify that?
    Is it possible to mount the raw disk to some other drives except local Disk (C:\)
    How to do granular recovery in DPM 2012 R2 for microsoft exchange?

    Chris,
    Really sorry for the delay in response.
    I found lots of warning messages in the logs like below one:
    578    788    24-Apr    20:49.7    18    readeriterator.cpp(587)    [000000002435A140]    0BABF215-19DF-49F5-B8DF-7210CB336DD5    NORMAL  
     "CFileReaderIterator:GetNextFileReader -> Skipping Hardlink with Physical FilePath: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy34\Windows\WinSxS\amd64_microsoft-windows-i..l-keyboard-0001042b_31bf3856ad364e35_6.2.9200.16384_none_f8e4c1f6d2951dd3\KBDARMW.DLL,
    Logical FilePath: \\?\Volume{bd3973d0-2f82-11e4-93f6-806e6f6e6963}\Windows\WinSxS\amd64_microsoft-windows-i..l-keyboard-0001042b_31bf3856ad364e35_6.2.9200.16384_none_f8e4c1f6d2951dd3\KBDARMW.DLL"
    578    788    24-Apr    20:49.7    18    readeriterator.cpp(587)    [000000002435A140]    0BABF215-19DF-49F5-B8DF-7210CB336DD5    NORMAL  
     "CFileReaderIterator:GetNextFileReader -> Skipping Hardlink with Physical FilePath: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy34\Windows\WinSxS\amd64_microsoft-windows-i..l-keyboard-0001042e_31bf3856ad364e35_6.2.9200.16384_none_fa395780d1ba2b68\KBDSOREX.DLL,
    Logical FilePath: \\?\Volume{bd3973d0-2f82-11e4-93f6-806e6f6e6963}\Windows\WinSxS\amd64_microsoft-windows-i..l-keyboard-0001042e_31bf3856ad364e35_6.2.9200.16384_none_fa395780d1ba2b68\KBDSOREX.DLL"
    So, I'm checking with concerned guys in here about this. I'll get back to you once I receive any update from them.  However, if it very urgent and need immediate assistance, I suggest you to open up a support ticket with Azure technical Support team
    as they will be able to provide you very quick solution.
    Regards,
    Manu

  • CCME integration with Microsoft Business Contact Manager

    Hi,
    Can anyone tell me, if a CCME can be integrated with Microsoft BCM such that when a call comes in details of the client pop up, should they exist in the Business Contact Manager.
    Finding exact information is like find a needle in a hay stack.
    Regards
    LN

    Hi Swinster,
    Apologize for the late reply.
    What is your current situation? As JS2010 stated, also in this KB article:
    http://support.microsoft.com/kb/2101557
    During the 'Specialize phase' of Sysprep, Sysprep.exe looks at the Last Modified Date of the ntuser.dat file for each user profile to determine which user profile to copy to the default user profile. However, the earlier cleanup functions of sysprep.exe
    loads each Ntuser.dat file to make security ID (SID)generalizations. You cannot predetermine which user profile will be copied if more than one user profile exists.
    How about we skip the copyprofile option?
    Further, see if the following article would help to customise the user profiles settings:
    Configuring Default User Settings – Full Update for Windows 7 and Windows Server 2008 R2
    http://blogs.technet.com/b/deploymentguys/archive/2009/10/29/configuring-default-user-settings-full-update-for-windows-7-and-windows-server-2008-r2.aspx
    Or we may consider seek help at the office outlook forum for the BCM deployment.
    Best regards
    Michael Shao
    TechNet Community Support

  • Groupware integration  with microsoft exchange server

    I have a query regarding Groupware integration with microsoft exchange server.whether we require IIS server and microsoft exchange server on the same machine for groupware integration.or they can be on different machines.
    thanks,
    Pramod

    hi,
    We actually implemented integration of SAP with microsoft exchange server. It is not necessary for server and IIS to be in the same machine.
    regards,
    Ganesh.N

  • Oracle HRMS Integration with Microsoft Exchange Server 2007

    I would like to know if it is possible to integrate Oracle HRMS 11.5.10.x with Microsoft Exchange Server 2007 using Microsoft Identity Lifecycle Management (ILM) 2007?
    Has anyone ever come across something like this and successfully achieved it? Does anyone know of a step-by-step guide (or forum discussion) to achieve this?
    Response(s) will be highly appreciated.

    hi,
    We actually implemented integration of SAP with microsoft exchange server. It is not necessary for server and IIS to be in the same machine.
    regards,
    Ganesh.N

  • Integration with Microsoft Exchange!!! How is it???

    Hi!
    I need to know in which level of integration has Oracle Portal with Microsoft Exchange?
    Do we have any Pre-Built Portlet?
    Thank you!

    Eduardo,
    Download the MS Exchange portlets here, and look at the documentation here.
    regards,
    Stewart

  • Dreamweaver Integration with Microsoft Sharepoint

    Can pages designed in Dreamweaver be integrated with a
    website run on Sharepoint (a Microsoft Office application)?

    I have successfully copy/pasted code from Dreamweaver into
    SharePoint Designer, and imported images and scripts into Designer
    so the relative paths resolve. I found your post because I'm
    searching for info about using only Dreamweaver without Designer as
    an intermediate step.

  • SAP Integration with Microsoft

    Hi,
    what are the different ways of integration from SAP to Microsoft and Reversal ?
    For Example:  SAP-> MS SharePoint , SAP -> MS ChangePoint (PSA Software)

    Hi Nawaz,
    Check these, about Sharepoint integration with SAP PI:
    Sharepoint integration with SAP PI
    Interoperability between Microsoft .Net 3.5 and EHP 1 for SAP NetWeaver PI 7.1 (Article)
    I havent work with Changepoint, but if i was you i would read about the kind of interfaces that support to take the more appropriated in SAP PI.
    Regards,

  • OIM integration with Microsoft CRM by using webservices? (OIM: Oracle Identity Management)

    Hi Guys,
    can you provide me integration document for my new project
    OIM with Microsoft CRM, by using webservices.
    Venkat
    [email protected]

    user1106726 wrote:
    We currently have ILM 2007 in our environment with limited usage at the moment. We are looking at purchasing Oracle Identity Manager to implement an enterprise wide IAM solution.
    We were wondering if it is possible to continue using ILM like a middleware between our AD forests and the Oracle IdM. Where the Oracle IdM is the overarching IAM solution and Microsoft ILM 2007/FIM 2010 is like the metadirectory for our AD forests.
    Is this possible without installing the Oracle Management Connector on any of our DCs and using ILM as the directory that Oracle IdM connects to. All AD account provisioning/de-provisioning, acct updates, password sync/reset will be initiated from the Oracle IdM to ILM and then implemented on AD. In order words no direct interaction with AD domain controllers from Oracle IdM, everything will go to ILM and ILM in turn applies it to AD.
    Is this possible?yes
    >
    Is there a custom connector that will work with ILM 2007/FIM 2010Yes, if you write one you will have a custom connector
    >
    Is this a simple customization or something that can be problematic and expensive?It won't be simple. Problematic and expensive maybe, depends on how good you are with OIM and ILM

  • CUPS 8.X integrated with Microsoft OCS

    Hello all,
    I'm looking for a list of pros cons for whenever you integrate presence with Microsoft OCS is there a doc out there that will tell you which features you will not have in OCS if you do an integration like this ?
    or is there a document that will show what features are supported ?
    thank you

    Not sure if it helps but in the first pages of the document below you have an overview of the integration with the supported / unsupported features and the limitations
    http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns784/870259.pdf
    HTH
    Christos

  • Portal Integration with Microsoft Exchange 2007

    Hi all,
    I would like to integrate MS Exchange 2007 with portal so that I can enable all the groupware services including calendar, emails, appointments, availability etc.
    Our Exchange landscape is integrated with our ADS, but portal uses its own user data store with a different set of User Ids.
    I need to implement SSO between both these systems, where the user id is different.
    I found few articles in SDN explaining how to configure SSO, but i couldn't quite find anything on how i can accomplish my objective here.
    Can any of you help me out?
    Thanks a lot
    Shobin

    Eduardo,
    Download the MS Exchange portlets here, and look at the documentation here.
    regards,
    Stewart

  • Portal Integration with Microsoft Active Directory

    We are working on a project to integrate Oracle9iAS Portal with Microsoft Active Directory. I am wondering if anyone has any experience with this and hence suggestions. Particularly, I'm wondering if its possible and how to use Active Directory to manage the Portal user accounts and group relationships?

    Please note that we finally got this working. For Active Directories sake, I would suggest using userPrincipalName or sAMAccountName as the Unique Attribute. Also, note that Active Directory uses OUs for organization, not CNs, so the search base should be either just the DN of the domain or an OU in the domain. Also, be sure to specify the full DN of the Bind DN as in CN=Administrator,CN=Users,DN=domain,DN=com

  • Tandberg Codian MCU 4505 integration with Microsoft Lync server 2010

    Hi,
    We are trying to integrate Tandberg Codian MCU 4505 with Microsoft Lync server 2010.
    We do not have any VCS in the setup.
    If anybody has tried it before, please suggest configuration to be done on Tandberg Codian MCU 4505 and Lync server.
    Regards,
    RN

    Hi,
    so, i have the same environment. Lync 2013 and a cisco 1000V router on esxi with VRFs.
    here is m config:
    vrf definition Mgmt-intf
    address-family ipv4
    exit-address-family
    address-family ipv6
    exit-address-family
    voice vrf Mgmt-intf
    voice service voip
    no ip address trusted authenticate
    address-hiding
    media disable-detailed-stats
    allow-connections sip to sip
    no supplementary-service sip moved-temporarily
    no supplementary-service sip refer
    sip
      bind control source-interface GigabitEthernet0
      bind media source-interface GigabitEthernet0
      listen-port non-secure  5066
    voice class codec 1
    codec preference 1 g711ulaw
    codec preference 2 g711alaw
    codec preference 3 g729r8
    voice class codec 2
    codec preference 1 ilbc
    codec preference 2 g722-64
    codec preference 3 g711alaw
    codec preference 4 g711ulaw
    interface GigabitEthernet0
    vrf forwarding Mgmt-intf
    ip address 172.16.1.164 255.255.255.0
    negotiation auto
    dial-peer voice 15 voip
    tone ringback alert-no-PI
    numbering-type unknown
    preference 1
    destination-pattern 4.
    rtp payload-type comfort-noise 13
    session protocol sipv2
    session target ipv4:172.16.2.207:5068
    session transport tcp
    voice-class codec 2
    dtmf-relay rtp-nte
    dial-peer voice 17 voip
    numbering-type unknown
    preference 1
    destination-pattern 7.
    rtp payload-type comfort-noise 13
    session protocol sipv2
    session target ipv4:172.16.1.32:5060
    session transport udp
    voice-class codec 2
    dtmf-relay rtp-nte
    gateway
    timer receive-rtp 1200
    sip-ua
    keepalive target ipv4:172.16.2.207:5068 tcp
    172.16.1.32 - Asterisk with a extensions on it.
    172.16.2.207 - Lync 2013 mediation server with other extension on it
    i can call from Asterisk extension via router and to Lync extension.
    i cannot call from Lync to Asterisk.
    TCP session with the router from Lync on port 5066 does not come up. three way handshake seems to come up.
    strange. lync person seems to configured everything correctly
    any thoughts?

Maybe you are looking for

  • Trying to preserve video quality in end result

    Hi, my big question is re the problem of quality reduction in the final product, say a disc image. Even though the video is short, just 1/2 hour (no stills), during "processing" it becomes grainier and loses color saturation. Is there no way to keep

  • Itunes wont open i have tried literally EVERYTHING

    i unpgraded to 6.04 and it wouldnt open, so i tried downloading 6.03 again, then i tried using the ipod cd and it wont open... Ive read all the posts i have downloaded ewido, and deleted the sc file, i have removed and reinstalled at least 10 times,

  • PO release strategies

    Hi all, A requirement arose in my company, to get all the details of PO release strategies exist now. That is, when you consider a single department we identify that department in SAP by purchase group code allocate for that particular depaartment. A

  • Forms Builder - HTTP Response: 500 - Internal Server Error

    Hello, When starting the Forms Builder in our dev environment, the new java window pops up and I get a an error pop up that says:HTTP Response: 500 - Internal Server Error. I click OK on this and it comes back several times. After a while the forms b

  • Computer makes clunking sound after installing OS Lion

    Ever since I installed OS Lion, my iMac now makes a quiet regular clunking sound all the time in the background, as if it is processing something. ....Never noticed this before. Any ideas what this could be?