PS LE 5.0 upgrade to 5.2* issue

I have PS le 5.0
I try to upgrade to 5.2*
it says it cannot find Adobe PS LE 5.0 in the directory and yet it is right there, htere is no other palce it can be, exectly the same C:\Programs\Adobe\Photo Shop 5.0
The upgrade says ythe directory does not exist, then how amd I usiong the program?

This is where my Adobe PS 5.0 is installed (C:\Program Files\Adobe) and is where Adobe wanted to download the upgrade to, but it keeps givng me an error message saying I dont have this directory and cannot find the Adobe file.
SO you see why I am confused/frustrated, I rebooted, reinstaled 4 times, and I get the same responce. I even tried to copy the file but it would not let me. I cant get that far into it.
It just wont work.
I read in some online blogs where others had similar issues while others did not and nothing there was helpful.
I tried opening it in its own window as well. I think someone would remember what to do about this.
Thks

Similar Messages

Win 10 Upgrade and Power Manangement Issues

I have an S230u Twist. After upgrading to Win 10 I have the following outstanding issues: The most problematic is that after the upgrade I have an issue with the unit going to sleep. Upon waking, the screen brightness resets to about 5%. It doesn't do this all the time but often enough be irritating. I've turned off adaptive brightness but this doesn't help. I've run System File Checker which made some fixes to corrupt files and this helped somewhat. Lenovo Solutions Center reports that the Power Management Software is not installed even though I 've upgraded the Power Management driver with the Win 10 version. I'm at a loss to know what to check next to fix this. The other issue concers the start menu - the "Most Used" doesn't seem to update with the Most Used programs I use (most which are on the Task Bar). Any support I can get on the Power Management issue would be most appreciated.

I spent more hours trying to resolve. Down loaded driver 355.60 Win 10 64 bit (355.60-notebook-win10-64bit-international-whql)Uninstalled current driver and software via device manager.Expanded the driver and ran setup. Performed a custom install without GF Experience. Install went through fine and rebooted after removing software.Came back up and continued install and completed with no errors. Ran device driver and confirmed driver installed. Set GoogleEarth to run with graphics processor.Everything seemed okay.Set desktop to include in notification tray and Display GPU Activity so I could see that GE was running in processorThen launched GE with 3 buidings and citties. Ran site seeing tour.Crashed after a couple of minutes with System_thread_exception_not_handled and rebooted. When it came back up I turned of to show in notification tray and turned off GPU activity.Re-Ran GE and it lasted a bit longer and then crashed with the same errorSystem_thread_exception_not_handled and rebooted. Would welcome any further help.

Oracle Database upgrade to 11G (Host_Command Issues)

Sorry I'm posting this again. Original post in Database - Upgrade. I'm not getting a lot of clicks in that category
We recently upgraded to Oracle 11g (Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production). Our PL/SQL release: (PL/SQL Release 11.2.0.2.0 - Production). We use a lot of host commands inside our PL/SQL stored procedures. One of these included fetching data from an external server and pushing the data into Oracle Tables.
Most of this process is running fine, except the execution never completes. There is no issue data wise. It's just that the Host_command doesn't receive the completion status and seems to be running even though there's nothing going on in the background.
The Oracle e-business suite's concurrent program based on this stored proc also never completes, though it doesn't do anything in the background. For testing purpose, our DBA used 2 insert statements one before and one after the host_command. The insert before the host_command worked but not the one after. Please help! This is happening after we upgraded to 11g 3 weeks ago!
Thanks, Naveen Gagadam.

Pl do not post duplicates - Upgrade to 11g, Host Command Inside Stored Proc doesn't end.
I have moved your duplicate post to the EBS forums
Srini

Firmware upgrade?? Printing Issues?? HP Designjet Z6100ps

I have a Designjet purchase as a demo in 1/2008. The last firmware upgrade that is currently installed is GG-GG_9.0.0.4. I am having printing issues where it prints about 4" of my prints from Apogee Printdrive (which comes from a windows computer) and then wants a restart with the firmware error code. Prints from the MAC are fine and will go straight thru. I have tried multiple firmware upgrades (the latest is GG-GG_11_00_00-2_mvl40-x86-opt_B.dmg) and it is all invalid. After a week of trial and error and trying different upgrades from different computers I am at my whits end. We print to the this printer presslayouts to look at before plating for press. Printing Banners from the MAC is no problem. Anyone have any suggestions. And of course, warranty and service is nill.

I am linking you to the the Designjet forums below. Please just repost your question their it will have better chance of getting answered.
Designjet forum

Weblogic 8.1 to 9.2 upgrade of web application Issues

Hi,
I am trying to migrate an Weblogic 8.1 web application project (based on netui/struts/pageflows) to 9.2 using the workshop upgrade utility. During the upgrade, i get the following errors(note, this is not after upgrade but during upgrade itself).
====================================================================================================
!SUBENTRY 1 com.bea.wlw.upgrade <ERROR> <RESOURCE: /RMSPortal/WebContent/visitorTools/skeletons/edittogglebutton.jsp> 2010-07-06 16:37:51.341
!MESSAGE Exception caught during upgrade of "edittogglebutton.jsp"
!STACK 0
java.lang.LinkageError: loader constraints violated when linking javax/xml/namespace/QName class
====================================================================================================
Please let me know if this is an issue or can be ignored ? or how can i get rid of this error ?
Regards,
Ram

Hi,
I am trying to migrate an Weblogic 8.1 web application project (based on netui/struts/pageflows) to 9.2 using the workshop upgrade utility. During the upgrade, i get the following errors(note, this is not after upgrade but during upgrade itself).
====================================================================================================
!SUBENTRY 1 com.bea.wlw.upgrade <ERROR> <RESOURCE: /RMSPortal/WebContent/visitorTools/skeletons/edittogglebutton.jsp> 2010-07-06 16:37:51.341
!MESSAGE Exception caught during upgrade of "edittogglebutton.jsp"
!STACK 0
java.lang.LinkageError: loader constraints violated when linking javax/xml/namespace/QName class
====================================================================================================
Please let me know if this is an issue or can be ignored ? or how can i get rid of this error ?
Regards,
Ram

Oracle upgrade 10.2.0 issue with sql

we have recently upgrade oracle 10.2.0.After upgrading we found that some query returns the order of rows.Just like we have query which returns data in ascending order and which displays on to the screen.But now it screwed up the order of dispalying the rows.How do i fix it?

user10374087 wrote:
we have recently upgrade oracle 10.2.0.After upgrading we found that some query returns the order of rows.Just like we have query which returns data in ascending order and which displays on to the screen.But now it screwed up the order of dispalying the rows.How do i fix it?Let me guess, you've always relied on the fact that the GROUP BY statement returned the data in an ordered fashion?
Here's news for you. It was never documented that GROUP BY would order your data, that was just a side effect, and a side effect that has now been corrected. If you want ordered data you should include an ORDER BY in your query, as you always should have done anyway if you'd written the queries properly. ;)

CRM2007 upgrade and IC webclient issue.

Hi all,
We have successfully upgraded from crm4.0 to 2007 last weekend.
However when I launch IC Webclient, it is blank. Is there something that I missed?
Also, I have applied note 1144511, still same issue.
Regards,
KG
Edited by: KG on Mar 17, 2008 7:06 PM

Hi KG,
May I know how you started the IC webclient in CRM 2007?
Are you using crm_ic transaction?
For CRM 2007, different steps have to be used.
For CRM 2007, you might have to use transaction
bsp_wd_cmpwb and component = crm_ui_frame to test.
This will start the new WEB UI with a user id has business role related to IC Webclient. The standard role is IC_AGENT.
You may have to assign it in ppoma_crm for the position using the same step as you assign a ic webclient profile, but instead, you need to assign a business role = IC_AGENT.
Hope these could do help!
Hongyan

Has Firefox been optimzied for the new Mac OSX Lion? I've been having issues using the browser since upgrading to Lion. Issues include using some websites as well as google e-mail...icons do not appear etc.

when checking mail in google I am not able to 'star' an e-mail or mark it etc. I don't get the option to do that, as I did before upgrading to Mac Osx Lion

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

Want to upgrade to CS6, but issue with AVCHD scrubbing might stop me

I've been using the Adobe Creative Suite for years and really love it. The last version I stuck to was CS5. Premiere Pro CS5 had no problems scrubbing my AVCHD footage (mts wrapper from GH2 cameras) and I wanted to upgrade to CS5.5 when this became available. Then a problem occured: although the project files (old and new) loaded a lot quicker than before, it was no longer possible to scrub through the footage. The lag was just incredible and I can see (and hear) my drives go mad as I try to scrub through the footage. I assume this is because certain things are no longer loaded at the opening of the project, but just when you look at the footage on a timeline.
I hoped the issue would have been fixed in CS6, but after a colleague kindly installed the software for a few days on my machine (spare licence he had, since been uninstalled), it is clear that it is still impossible to use. WHY?
I'm happy to upgrade some of my system to try and make this work, but I need to know what the problem. My current set-up is (no longer) cutting edge, but hardly bottom of the pile either. Any advice would be appreciated.
Current Spec:
6 core AMD processor 3.6Ghz
8 GB of ram
Nvidia GT440 card (cuda enabled)
MTS files and project files are on a 2TB raid 0 (though windows 7, not dedicated card) (2 drives 1TB each 7200RPM sata 3)
Thanks for any help.
PS: I tried with and without cuda, moved the media cache to other drive, disabled sound whn scrubbing,... pretty much everything

Niels,
I've seen them and will add them to the results page later today.
You end up around rank #630, somewhat as expected. Your disk score is quite acceptable and reflects your raid setup. However, your MPEG score is disappointing, but that may be attributed to only 8 GB memory and the relatively meager GT 440 card. However, in comparison with other Phenom II X6 systems, nothing really stands out.
Your dilemma to improve the scrubbing behaviour is twofold: You are hindered by the slowness of the Phenom II X6, and whatever you will upgrade, but keeping the AMD CPU will only marginally improve performance. If you really want to improve performance you need a completely new Intel based system, but that is costly, requiring a new CPU, mobo and memory.
Upgrading memory does not look attractive, since it will not really help performance and is not portable to a new Intel system.
The only things that can help IMO and that can be ported to a new system in the future are extra disks and a better video card. I would start with additional disks, see if that solves the scrubbing issues. If that still is not enough, you can consider upgrading the video card to a GTX 670 or even a GTX 560 Ti if your PSU can handle it.

ITunes upgrade and iPod syncing issues

I opened itunes and it said there was an upgrade for it. I installed it and when I plug in my ipod, it syncs, then when I try to sync it again, it does not. on the initial opening of itunes I noticed that windows has the ipod drive listed as "G". upon syncing it disappears. I unplugged the ipod and then plugged it back in. windows again recognizes the ipod and the ipod automatically syncs when connected so it can find it in itunes. as soon as its done syncing, again it disappears from windows. there has to be a fix for this. as far as I can tell its in the itunes software that is causing this because I have not changed any drivers. any help would be greatly appreciated.

If you don't want to do manual update, theres nothing else we can really recommend. You might want to invest in a cheap External drive and put all your music on it. You can get one for 100 or less if you shop around

Upgrade 7.1.1 issue

I get the following error after I installed 7.1.1. The error did not happen before the upgrade and I can use audio with other apps. I have tried reinstalling several times.
Can I go back to the previous version which run fine. I am on Windows XP.
Error
iTunes canot run because it has detected a problem with your audio configuration

iTunes canot run because it has detected a problem with your audio configuration
that one is typically caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
the following article may be of some assistance.
iTunes 7 for Windows: iTunes had detected an audio configuration problem

Upgraded to CS6..issues with printing

We upgraded one of our Macs to CS6 and since then when a InDesign project is saved and exported out as a PDF, we get the JPG image imbedded in the PDF as all pixilated.
We can take the same PDF and print it to the same printer, but use CS5 and have no issues.
Anyone else seeing this??

Please post full details including screen shots in the InDesign forum.
Bob

Mavericks upgrade Xerox C2200 Print issues

Previous templtes and options on 10.9 setup to print envelopes on the bypass tray on my C2200, upgraded to Mavericks and now envelope printing on the bypass tray printing 90 degrees out. Preview looks fine as it always has before clicking print. Using the Xerox Driver 4.0

Thanks Carolyn, Xerox support site has to be the slowest in the world... The OS X driver is older than the OS X 10.8 driver, 26/8/2011 vs 29/5/2013, though if you click view other drivers on either you get access to an updated driver dated 26/9/2013... Updated driver hasn't helped.

V10.1.5 upgrade - Adobe PDF printer issues - font embedding

Hi,
Accepted the 10.1.5 (Acrobat Standard) upgrade. Have started having "Adobe PDF" printer failures with MS Outlook 2010: Font embedding issues.
Is there a setting somewhere I need to tweak to tell it to substitute with another font when it runs into licensing issues?
I've re-installed CutePDF as a workaround, but would prefer to use the Adobe printer.
save-as-filename.log:
"%%[ ProductName: Distiller ]%%
%%[ Error: LucidaSans cannot be embedded because of licensing restrictions. ]%%
%%[ Font vendor (B&H) does not permit this font to be embedded in PDF. ]%%
%%[ Error: invalidfont; OffendingCommand: xshow ]%%
Stack:
500
/l
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%"
Regards,
JD

In the settings file you should be able to set to continue even if the embed fails. In that case, I think you will simply have the PDF without the one font being embedded. You can also set to never embed it in the settings file (if you can find it on your system).

About WLC 5508 version 6.0 upgrade to 7.0 issue

hi guys,
I have tow WLC , version is 6.0
One of the WLC successful upgrade and after rebooting the normal
the another WLC successful too , but after rebooting the system version or 6.0
Thanks in advance

Hi,
it seems the one that shows 6.0 was not successfully upgraded. give it another round.
Rating useful replies is more useful than saying "Thank you"

BO Excel 2007 Upgrade- Help ..Graph Issues

Hi All,
I am wanting to troubleshoot some formatting challenges we are having and would like to add Excel 2007 as a download format to see if it cures my issue. Can I request somewhere or can we upgrade to 2007?
My challenge is that the chart formatting in BO is perfect but the excel file changes things like size, frequency of labels, etc. I am hoping because we dump in 2003 excel that somehow the compatibility is making those adjustments on its own. I can only test that theory if 2007 is available to BOu2026 make sense? Currently takes me about 25-30 minutes to adjust in excel where that could be a zero time. 
Regards
Sanjeev Gubyad

After upgrading the SAP Business One to 2007B version, When I looked into the user tables and user defined fields, all nvarchar fields got changed to nvarchar(max) from nvarchar(n). Why did it change so? How should I proceed in this?
System habit the nvarchar(max). Create keys (indexes cannot be defined over it).
In CR your should cast the User Defined fields as nvarchar with limited length for grouppin , summarize and parameters
(cast (U_TEXT as nvarchar(10)) as U_TEXT in your CR Query.
Regards,
János

PS LE 5.0 upgrade to 5.2* issue

Similar Messages

Maybe you are looking for