Ps module configure doc / bpp

hi,
can any body send me the configure doc. or bpp of any organisation where Ps module is implented along with process to be follow in operation and tagging of master data with the financial data based with any link.
regards

Hi,
Please refer the links below.
http://help.sap.com/saphelp_47x200/helpdata/en/04/926eae46f311d189470000e829fbbd/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCPS/CAARCPS.pdf
J12: Project System (Basic PS configurations)
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
It can be much useful to you.
Regards
Tushar
P.S.Reward points for useful answer.

Similar Messages

  • File Adpater Module Configuration

    I have a scenario where i need to send the file to webservices,the file is in xsd:base64 binary format,the file is getting splitting up in the moni inbound message payload,I think this can be rectified by using module conifguration in file adapter by using tranform beam & converting to base64 binary,Can any one please tell me how to use processing sequence & module configuration for base 64 binary.....
    Advance thanks for your help
    Sriram

    Hi,
    Check this blog
    /people/sap.user72/blog/2005/07/15/copy-a-file-with-same-filename-using-xi
    HowToGuide-
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
    Regards,
    Moorthy
    Message was edited by: Krishna Moorthy P

  • File Adapter-Module configuration

    Hi All,
    I have the following requiremnt.
    "Duplicate files should not process"
    Following are the File Access Parameters.
    Source Directory: ABC (ex: contains aa1,aa2,aa3,aa4 files)
    Filename: *
    File name mask: aa*
    My doubt is if they place aa1 file again in ftp , i should not process.
    For this I'm thinking to write module configuration.
    Can any one suggests , whether this is the correct approach? If it is could u explain how to write this module and where to write this module and how to import in xI, do i need to pass any parameter name in module configuration.
    Regards,
    venu.

    Hi Venu,
    You can go with Module in the Sender File Adapter.
    First you need to check the file name and you need to store this file name in the Database.( you can use Java Database).
    If there is an entry in the database for that file, then reject the whole file as per the business requirement. So that you can avoid , overhead of Mapping. Because if there is an error set the flag in the message and check this flag in your Receiver Determination, if it is an error send into error directory.
    Another way is outside the XI, i.e using shell scripts.
    Regards,
    Moorthy

  • Parameter name in module configuration of adapter module in comm channel

    Hi Experts,
    I have developed an adapter module to read a excel file , have used the module in the sender file adapter.
    What entrie should i put in parameter name and parameter value  in module configuration of adapter module in comm channel.
    Im too confused,,pls help

    Hi Ivan,
    The code is basically to read the all colums add em under xml tags and read from second row on wards the data
    please find below the module data code
    public ModuleData process(ModuleContext mc, ModuleData imd)throws ModuleException
                             Object obj = null;
                             Message msg = null;
                             MessageKey amk = null ;
                        amk = new MessageKey(msg.getMessageId(),msg.getMessageDirection());
                        Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"Module called");
                        try {
                                  obj = imd.getPrincipalData();
                                  msg = (Message) obj;
                                  XMLPayload xp = msg.getDocument();
                                  if (xp != null)
                                        byte by[] = convert(xp.getContent());
                                             xp.setContent(by);
                                       imd.setPrincipalData(msg);
                              catch (Exception e)
                    return imd;
                   public byte[] convert(byte src[]) throws Exception
                        String xmldata = "";
                   try
                             ByteArrayInputStream byteArr = new ByteArrayInputStream(src);
                             Workbook w = Workbook.getWorkbook(byteArr);
                             xmldata ="<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n\n"+ "<ns0:""MT_ExcelFiles"" ""xmlns:ns0=\"""urn:xyz:abc"+"\"> \n";
                               int a = w.getSheet(0).getRows();
                               int b = w.getSheet(0).getColumns();
                        for(int j=1;j<a;j++)
                                   for(int i=0;i<b;i++)
                                                  xmldata = xmldata + "<"w.getSheet(0).getCell(i,0).getContents().toString()">"w.getSheet(0).getCell(i,j).getContents().toString()"</"w.getSheet(0).getCell(i,0).getContents().toString()">";
                        xmldata = xmldata"</ns0:""MT_ExcelFiles"+">";
                        w.close();
              catch (Exception e)
           return xmldata.getBytes();

  • New g/l a/c configuration Doc.

    Hi SAP Gurus,
    PLZ can any one send new g/l a/c configuration Doc.
    my email id  :-  [email protected]
    thanks in advance
    Regards,
    Mahendra

    hi Jostna..
    could you send the material to my mail ID
    ID : [email protected]
    Thanks
    Madhu

  • Mail adapter and MessageTransformBean module configuration issue

    Hi All,
    I am trying to use module configuration in Receiver Mail adapter. Below is my configuration. (We are using SAP PI 7.11)
    Parameter/General tab:
    Message Protocol : XIPAYLOAD
    Use Mail package option is selected.
    Content Encoding = none
    Module tab:
    Processing Sequnce:
    AF_Modules/MessageTransformBean  : XSLT
    sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean : mail
    Module Configuration:
    XSLT    Transform.Class                        com.sap.aii.af.sdk.xi.adapter.XSLTConversion
    XSLT    Conversion.XSLTFileName     /tmp/GL_POST_RESPONSE_EMAIL.xsl
    XSL works outside of PI . However, when i test with a message, I am seeing following errors in Runtime workbench:
    Please let me know what could be wrong in the above configuration
    23.03.2011 15:24:39 Information MP: processing local module localejbs/AF_Modules/MessageTransformBean
    23.03.2011 15:24:39 Information Transform: using Transform.Class: com.sap.aii.af.sdk.xi.adapter.XSLTConversion
    23.03.2011 15:24:39 Error Transform: Transformer Conversion1.0.0610 Error initializing XSLT Mode:; caused by javax.xml.transform.TransformerConfigurationException: Could not compile stylesheet
    23.03.2011 15:24:39 Information Transform: transforming the payload ...
    23.03.2011 15:24:39 Error Transform: failed to execute the transformation: com.sap.aii.af.sdk.xi.adapter.trans.TransformException: Error converting Message; nested exception caused by: java.lang.NullPointerException: while trying to invoke the method javax.xml.transform.Templates.newTransformer() of an object loaded from local variable templates
    23.03.2011 15:24:39 Error MP: exception caught with cause com.sap.aii.af.sdk.xi.adapter.trans.TransformException: Error converting Message; nested exception caused by: java.lang.NullPointerException: while trying to invoke the method javax.xml.transform.Templates.newTransformer() of an object loaded from local variable 'templates'
    23.03.2011 15:24:39 Error Adapter Framework caught exception: Error converting Message
    23.03.2011 15:24:39 Error Delivering the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.adapter.trans.TransformException: Error converting Message; nested exception caused by: java.lang.NullPointerException: while trying to invoke the method javax.xml.transform.Templates.newTransformer() of an object loaded from local variable 'templates'.

    Hi All,
    Issue has been resolved. There was some minor issue in the XSL. The XSL Stylus studio was not reporting this as an error. However PI's XSL engine was reporting that error. This error message was not showing up in runtime workbench. However, when i looked at the default trace, there were few more errors. After fixing the XSL, I am able to received the email
    Thanks
    -Pradeep

  • PI SFTP RECEIVER ADAPTER MODULE CONFIGURATION

    Hi,
    I am new in SFTP adapter. I want to transfer file from proxy to SFTP. I want to output file is in csv format. But now it is in  xml format.
    Please help me!!!
    My module configuration is in attachment..

    Hi
    I have got the problem. You have to modify your target structure in the below format
    <row>
    <column-name1>ABC</column-name1>
    <column-name2>12345</column-name2>
    <column-name3>Text1</column-name3>
    </row>
    Create any parent node and inside that create the sub-eliment STATUS and USERID
    something like
    MT_Succefactor
       <record>
       <STATUS>
       <USERID>
        </record
    Then you will get the desired output. Use the below content conversion paramters

  • Adapter module configuration

    The message that reaches the file receiver channel is
    <EDI_DC40>
                  structure1
    </EDI_DC40>
    <EK1NA1M>
                  structure 2
    </EK1NA1M>
                 So i wanna write a module configuration which will rename the first tag as <ek1na1m>. Plz help

    Hi Sumaya,
    you are creating the adapter module using the document i told or not...
    if you are using that document, then see in the process method you will write all your code......you will take the message as a string........then you can manipulate your string as you want - means you can rename your node..........then you can set this string as your XMLpayload.....
    Thanks,
    Rajeev Gupta

  • Receiver Module Configuration Issue

    Hi All,
    I have done the following Module Configuration in Receiver JMS Adapter, but facing issue in the Length of the Flat File received in JMS.
    it is having only 512 characters, i got clue that is because of   localejbs/SAP XI JMS Adapter/ConvertMessageToBinary.
    Binary can accept only 512 characters.
    I  need convert the message to TEXT. Please help me on this.
    Processing Sequence
    1                  localejbs/AF_Modules/MessageTransformBean            Local Enterprise Bean                          XML2Plain
    2                  localejbs/SAP XI JMS Adapter/ConvertMessageToBinary   Local Enterprise Bean                          convert_XI2Bin
    3                  localejbs/SAP XI JMS Adapter/SendBinarytoXIJMSService  Local Enterprise Bean     exit
    Module Configuration.
    XML2Plain     Transform.Class     com.sap.aii.messaging.adapter.Conversion
    XML2Plain     Transform.ContentType     text/plain;charset=utf-8
    XML2Plain     xml.addHeaderLine     0
    XML2Plain     xml.conversionType     SimpleXML2Plain
    XML2Plain     xml.endSeparator     'nl'
    XML2Plain     xml.fieldFixedLengths     10,15,10,10,15,13,13,13,15,2,30,1,10,10,10,10,8,10,10,10,8,11,11,3,3,1,1,15,10,15,1,30,15,15,10,8,15,10,10,15,15,4,8,1,2,8,35,11,10,10
    XML2Plain     xml.fixedLengthTooShortHandling     Cut
    exit     JMSMessageType     Text
    Regards,
    R.Ragu

    Hi Ragu,
    Can you please elaborate on this issue a bit more...?
    The Module Configuration looks fine to me.....
    Thanks
    Dhwani

  • Debugging JMS adapter with Module Configuration

    Hi.
    I have a problem debugging my JMS adapter with module configuration.
    All I get from the Message Monitor is a status "System Error", and no error category or error message.
    I know there's an error in my Module configuration design, since it works fine without.
    My configuration looks like this:
    PROCESSING SEQUENCE:
    1     localejbs/AF_Modules/MessageTransformBean     Local Enterprise Bean     XML2Plain
    2     localejbs/SAP XI JMS Adapter/ConvertMessageToBinary     Local Enterprise Bean     convert_XI2Bin
    3     localejbs/SAP XI JMS Adapter/SendBinarytoXIJMSService     Local Enterprise Bean     exit
    MODULE CONFIGURATION:
    XML2Plain     Transform.Class     com.sap.aii.messaging.adapter.Conversion
    XML2Plain     Transform.ContentType     text/plain;charset=utf-8
    XML2Plain     xml.conversionType     StructXML2Plain
    XML2Plain     xml.addHeaderLine     0
    XML2Plain     xml.recordsetStructure     STARTRECORD,DATARECORD,SERVICEYDELSERRECORD,SLUTRECORD
    XML2Plain     xml.STARTRECORD.fieldFixedLengths     2,8,6,7,10,7,3,3
    XML2Plain     xml.DATARECORD.fieldFixedLengths     2,8,6,4,35,17,7,7,7,5,5,5,18,18,18,18,18,18,18,18,18,9
    XML2Plain     xml.SERVICEYDELSERRECORD.fieldFixedLengths     2,8,6,4,3,20,18,18,18
    XML2Plain     xml.SLUTRECORD.fieldFixedLengths     2,8,6,7,10,7
    XML2Plain     xml.STARTRECORD.fixedLengthTooShortHandling     Cut
    XML2Plain     xml.DATARECORD.fixedLengthTooShortHandling     Cut
    XML2Plain     xml.SERVICEYDELSERRECORD.fixedLengthTooShortHandling     Cut
    XML2Plain     xml.SLUTRECORD.fixedLengthTooShortHandling     Cut
    The structure of the message looks like this:
    <STARTRECORD> (occurence = 1)
    <DATARECORD> (occurence = 1..unbounded)
    --- <SERVICEYDELSERRECORD> (occurence = 0..unbounded)
    <SLUTRECORD> (occurence = 1)
    I've crosschecked every field, and it length and all looks like it should!
    The worst part is the one not getting the reason why it fails. Any way I can get this information?
    I've tried to look in the Adapter Framework log, but I have no clue where to look for anything usefull.
    Help
    Regards Peter

    Hello,
    Below is the module configuration in my JMS sender channel:
    Check Message          Local Enterprise Bean          key
    ConvertJMSMessageToBinary      Local Enterprise Bean      convert_JMS2Bin
    ConvertBinaryToXMBMessage     Local Enterprise Bean      convert_Bin2XI
    CallSapAdapter                Local Enterprise Bean          call_AF_MS
    CheckMessage is a custom module which does some check on the incoming message.
    Now what I want to know is at which position should I include the DynamicConfiguration Bean? Should it be included at position 1 or at position 2 or someother position?
    ~Thanks.

  • With out Controlling module configurations, can we Configure PP module dire

    < MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Use an appropriate title. >
    Hi Experts,
    With out Controlling module configurations, can we Configure PP module directly?
    Thanks
    Chandra

    Hi,
    Yes you can configure PP with out CO but you will not get Product Costing results for the materials used.
    You will not be able to link Activities, Cost Centers, Over Heads which are production activities.
    Cost Analyisis for the Order will not be possible.
    To say in brief Cost related entries or break up is not possible if CO is not implemented.
    Regards
    Balaji

  • Ach payment configuration doc

    hi experts,
    can anybody will provide the ach payment process configuration doc, i have to configure in my project. kindly help me in this regareds
    gopal

    Please use T-Code FBZP for configuration of APP.
    Br,Vivek

  • Please help me P M Module configuration document.

    Hi friends,
    I am planing to learn SAP PM Module, I want know process wise flow, please help me P M Module configuration document.
    Regards,
    Murali.
    help.sap.com

    Lynn
    Had me stumped for a while too ...
    On the screen that presents all your "Blank" documents, simply touch the word "Blank" under the preview (not the actual preview) and you'll get a dialogue to name your document.
    Simon

  • BIC in Module configuration

    Hi All,
    We have imported Seeburger SWCV into IR and i can see different message types(orders,invoices etc) in external definitions and some standard mappings like(E_ORDERS_96A_to_I_ORDERSO5_LIST, T_ORDERS_V9_to_I_ORDERS05, etc)in message mapping.Does the suffix T stands for Tradacom, E stands for edifact are corect assumption?
    If i'm using the external definition(source message) and the message mapping from here, Do i still need to give the parameters in BIC module.
    Please confirm.
    Thanks,
    Smith

    Hi Paul,
    According to the existing structures which are present in the external defintions proceed.. and dont forget to deploy the .SDA file in the XI server using SDM..
    before that u need to create an Project which contains active mapping in which u need to move what ever the mappings and structures which u needed from there u can generate .SDA file and u can deploy it in server..
    and at the same time u need to some configuration steps in MODULE CONFIGURATION to call the BIC mapping designer program which was deployed as .SDA file in the server.
    revert back with ur exact queries..
    regards,
    Kishore

  • QM module configuration notes

    Any one please help me to get some QM module configuration notes.
    Do help me.if you have some notes "step by step notes of QM configuration"
    Also,if you know any sites please advise.
    thanks in advance.

    Hello Sandip,
    due to the fact that the necessities vary for the implementation of QM I would say that it is near to impossible to offer you the desired information. The implementation guide gives you an idea of what you can set up how and what you set up is an individual decision.
    If you need assistance in this case I would recommend contacting a correspondent
    QM-Consultant who can help you in this process.
    Regards,
    Isabelle

Maybe you are looking for

  • An error occured while created webi rpt on BEx and displaying data?

    Hi Experts, I have a problem which many couldnt able to provide a better solution and solve it. Need your expert solutions. Installed SAP BI with BO(R/3) integration kit SP3. Created WEBI report on BEx report via Universe. While trying to load/ refre

  • We are unable to manage our ACS

    Accidentally the power to the ACS server was switched off and then on again. But after the power on though the device came up successfully; we are not able to manage it. We are unable to manage our ACS. We have a configuration back-up. 1)       by HT

  • Need BAPI name to change the PO data in SRM.

    HI All, Need BAPI name to change the PO data in SRM. The BAPI_PO_CHANGE is not available in SRM. If there is no BAPI to change PO in SRM, what is the alternate solution? Regards, A.I.Rajesh.

  • Turn "Delete Resource Account" for Active Directory into rename/move/unlink

    My Windows sysad would like me to stop deleting Active Directory users; he's tired of cleaning up from dangling SIDs, and I don't particularly blame him. Instead, he would like the process of "deleting" an AD account to be more like: 1. disable 2. re

  • Where can I find a link to download Lightroom 2?

    Yes, this is an actual question.  After spending nearly 4 hours bouncing around Adobe's support system, I was told by an Adobe Support manager to 'try the forum'.  He told me that Adobe 'erases' previous versions of all products to make room for curr