PS- Network Teco - Undo ?

Dear PS gurus,
Request pl help in how to do undo if the Network is technically completed (TECO) applied in Network & saved.
In Project WBS & Definition, we have provision of UNDO or cancel the TECO & Close, but in network, we don't find the undo/cancel in Status, why?
Pl help, thanx in advance
Regards
Srihari

Hi,
You can check activation of user status in the project builder. In Project definition / WBSE / Network, in user status filed if some display is there, then your status has activated.
In SPRO also, you can check in project profile, wheather any user status has assigned.
Regards,
Rakesh

Similar Messages

Airport wireless trying to connect to my laptop

just purchased my first imac desktop also purchased the airport wireless everything works fine on the desktop what do i need to do to get my laptop to work on wireless ive tried to connect and use the password i've put in on the setttings still won't let me connect

kasba,
Welcome to Discussions!
Some users have an issue with the type of security method. Perhaps your laptop has some way of allowing you to also choose the security method prior to inputting the password. If you used WPA2 in setting up your iMac and AirPort base station, it may be that your laptop is not upgraded to include WPA2. WPA2 is currently the best to use, although not every computer or wireless router can handle it.
Another alternative is that you may have chosen to have a closed or restricted network. Undo (uncheck) that temporarily until you've established your laptop connection to the network. After that you might be able to successfully re-close your network.

Undo track as intruder in Network Magic

Hi,
I accidentaly created a problem. This is what happened: my router is not password protected (long story), therefor I regularly check Network Magic (for which I never registered so I guess I have limited options) and when I see something I don't recognise I click on 'track as intruder' and then remove it from the network. Now it seems I accidentaly branded a cell phone we use in the house as an intruder and removed it from the network and now it won't connect to Wifi anymore. I can't find an option to undo the tracking as intruder because the divice won't show up in Network Magic anymore.
Can someone tell my how I unblock the phone? You might suggest removing Network Magic from my PC and reinstalling it, but I have no install cd or anything.

A device tracked as intruder would still be able to connect to the wireless network. The said feature would just notify you each time a device tracked as intruder tries to connect to your network. What you can do is to forget the wireless network profile on your phone and try to reconnect. Also try to reboot your phone and your wireless router. Once the phone is already connected to the network, you should see it on the network map, so you can undo track as intruder.
Intruders Found in the Network

How to delete a PS network with status 'Technically Completed' (TECO)?

Dear all,
We have Webdynpro application, which will create a PS network in background. In the past it was working fine and many PS network are created. Now we have a scenario where some of the networks which are with status 'Technically Completed' (TECO) needs to be deleted from system. I tried to delete it from CJ20N, but it was not possible as the status is set to TECO. Please let me know how to delete a PS network which is with status 'Technically Completed' (TECO).
Thanks in advance.
Regards,
Vijay

The cluster goes out and finds all networks that are available. This is an automatic process. As long as there is a network there, it will show it. If you don't want it to show, disable the interface and it will disappear.
. : | : . : | : . tim
Thanks a million Tim! Disabling the correct interface made it disappear!
Actually, I had disabled the interface before I started this thread. When you posted the suggestion, I went back and looked at the network connections again and found out that I had disabled the wrong interface! My bad!
However, here is the interesting thing:
After I disabled the NIC and it disappeared from the FCM I physically disconnected its cable (actually I disconnected all unused / unconfigured NICs) ....then I re-enabled it. Now I see that FCM does NOT pick it up again.
I think FCM picked up those NICs because at one time I had put that NIC in the production VLAN (from the switch side).
One observation:
If you have NICs in a HV machine which are not connected to a switch, they do NOT show up in FCM. Once you connect them to some network, they start showing up. I guess by connecting them to a network, they are able to see NICs in other HV nodes.
Take a look at this screenshot. I have 6 NICs in there which are disconnected, none show up in FCM
-Rajeev rajdude.com

Authorization object for "set TECO" and "undo TECO"

We want to control the authorization for "set TECO" and "undo TECO",but we can't find relevant Authorization object. Is there any Authorization object for these two functions? If there's no Authorization object for them ,then how can we achieve the same result? Thank you very much!

Hi,
Under one user ID the auth object B_USERSTAT will have the authorization key in which user will be responsible to change the TECO user status.
One user will not have any authorization key under B_USERSTAT Auth_Object.
Hope it's will give you help.
Regards,
Vishal Kr. Sharma

Problem in undo TECO

dear
all
we have done teco to WBS element.now we want to UNDO
teco it is not happenig , and also it is not giving any message how to solve this problem.
Thanks and regards
madhu

Hi Madhu,
The system should give some message for not allowing the status change.
Please check if your there is any user status for this WBS element.
Please let us know the feedback.
Regards,
Amit

TECO Network Status

Hi,
Can you please help, Iu2019m getting error message when Iu2019m trying to change my Network Status to TECO. A purchase requisition for $3600, 000 was created and 2778636.16 were converted to purchase order and the service entry was accepted, $1,353,423 is on remaining order plan in S_ALR_87013558 and is consuming my budget. Now Iu2019m getting an error message no: 06411 that says Sum of quantities > 2< larger than total quantity.
Regards
Sandile

Hi,
I set the final invoie indicator because it was a purchase order for service but still i can't TECO my NETWORK status
Regards
Sandile

How do i undo 'forget network' on iphone 4

I clicked in 'forget network' when setting up my wi-fi connection on my iphone 4. Now I cannot access my wireless network, how do I undo this?

Copied from my previous post.
Selecting Forget this Network for a wireless network your iPhone has successfully connected with should not prevent the network from being shown as an available network to join and rejoining the network.
The Forget this Network option on the iPhone is for forgetting or erasing a wireless network on your iPhone that your iPhone has connected with so your iPhone does not automatically connect with the network when returning within range of the network.
This is not for not having an available wireless network from appearing in a list of available networks to select and join the network. There is no option on a computer or device to prevent an available wi-fi network from appearing to select from when in range of a network that is being broadcast.
If you don't want to join this network, don't select it, but you can't prevent the network from appearing as an available wi-fi network to join.

Undo of deletion flag for network activity

Dear Gurus,
When I am uploading the network activity from MSP, unfortunately deletion flag was set to all the activities and network. I undo the flag for network, but I couldn't find and activity under the network. Also, I am unable to create with the same number as well.
Kindly help me undo the deletion flag for the act ivies.
Regards,
Punith.

When you are in CJ20N, click settings and option, there select "Display deleted objects", now open your project, you will see activities with deletion flag status now. select and undo the deletion flag status.

How to undo (open) a closed network?

I closed the network but can't figure out how to open it again. When I go into Admin Utility the name appears but the "close the network" box is NOT checked. But the name does not appear on the Airport drop-down menu
Running OSX 10.3 & recently updated everything online. Dual USB base station.
TIA

Did you try simply pulling the Airport Base Station from power for a moment, then plugging it back in again to force it to reboot?

How do i undo "forget this network"

so i finally find out why my ipod touch 4g wont automatically join my home wifi network when my wifi was reset and i rejoined i accidently clicked forget this network so i have to keep amnually joining it i know its not an ipod issue since it automatically connects fine to my friends house it may be the router contributing too since its old but i think it was the forget this network so if theres anyway that can be undone id like to know thanks

This advice didn't do the job for me--at least not entirely: "Reset network settings: Settings>General>Reset>Reset Network Settings. You will have to rejoin all networks." I followed those directions and still had to keep signing in each time I returned home.
Elsewhere there was advice to reset the router. Instead of doing an entire reset of the router (which seemed daunting since it required re-installation of a firmware upgrade to this 6 year old AirLinki101, Model AR420W), I used the current router software to change the "Network Name (SSID)" from "default" to something that sprang from my imagination. With this new name, I've been able to connect now without having to enter the password anew.

Opening closed networks to update planned cost without un TECO'ing

Hello,
I need a way to be able to change planned costs for activities that have been already user status closed and TECOu2019ed, without un TECO ing the WBS.
Thanks for your assistance.

Hi,
Once an activity is set to TECO it gets greyed out and you cannot make any changes. You will have to cacel the TECO to make any further planning changes.
Regards
Sreekanth

Reversing TECO status for Multiple WBS elements

Hi,
Question on setting and then reversing TECO status for a WBS element.
When a project is closed technically in project builder, all underlaying items (wbs, network/activity) are technically closed as well.
When you try to undo this, only the status of the top element is changed, not the underlaying items.
Is there any way in which we get the underlaying items changed as well (mass change is not an option)
Regards,
Jatinder Bansal

You can try two methods :-
1. Open project in project builder, Select project definition and then go to WBS Overview under project definition, now select all WBS Element and then undo TECO status. Now all the WBS status will be updated. But, this will not have any effect on network and its activities.
2. Open the project in planning board, now select all the objects, now undo the TECO status. This will change the status of all selected objects like WBS,Network and activites....

Firefox won't open a link in a new window, crashes my xp desktop, locked my laptop out of the network. Uninstalled for now. Both systems fixed themselves.

Started having trouble on my IBM compatible XP desktop about a month ago, dominated CPU anytime a link used java to try to load in a new window, used 99% of capacity. Discovered old XP Laptop couldn't go to the internet or network last week, tested all hardware. Happened to uninstall Firefox on a whim. Laptop could go to internet, and I successfully backed up over my network.
Firefox version 3.6.12 I think. Doesn't seem to be opening new windows today either. Uninstalling until a fix can be found.

What in particular didn't you like about Firefox 6?
You can undo a lot of changes, either via changing settings or prefs on the <b>about:config</b> page or via extensions.
*https://support.mozilla.com/kb/common-questions-after-updating-firefox
Do a clean reinstall of the version that you want to use.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

How do I delete files from HFS+-formatted network drive

Relevant system components:
Very recent iterations of a MBA and MBP both running 10.7.4
Cisco Linksys e4200v1 wireless router, FWver1.0.04
Seagate 1.5 Tb FA GoFlex external drive
Full-size, single partition reformated by DiskUtility to HFS+ (Mac extended volume, Journaled)
Connected by USB to storage port on e4200
Storage set to share at root with either Anon r&w access or admin level user acct.
Demonstrated read and write access
I have set up an external drive as above. The drive is to be used to archive large amounts of uncommonly used data (not a backup) and then is backed up to crashplan+ off-site.
The drive came formatted as FAT32 (I believe.) As we still have one PC and all individual files are smaller than 4Gb, I set up the archive drive as formated out of the box.
Data was written to the drive without issue, backed upi off-site with no issue and accessed a couple times.
The issue came when recently upgraded some itunes albums. These albums had been previously removed from the library and from the computer and stored in the archive drive. These albums were upgraded and redownloaded from apple generating a copy of the album data, but in a superior format (no-drm, greater sampling rate.) This made the archived files obsolete and generated a risk of mixing versions. I decided to delete the obsolete files from archive.
When I attempted to do this by selecting, right-clicking and chosing "move to trash" I was prompted that this was not a "undo-able" action, suggesting that while I was selecting "move to trash," the action would not generate a copy in the trash. Next I was prompted to enter my user and PW. The only user and PW combo that would not cause the dialog to "shake it's head" at me, was my computer user-specific password. The network or drive associated user and PW combos would not take. When I entered my computer user and PW, it was accepted, but a dialog labeled "Trash" popped up with small font, reading "The operation can't be completed because you don't have permission to access some of the items."
Trying to delete only a random selection of one or two files would not work.
I checked the drive permissions and was only able to see "You have custom access." This is not modifiable. I attempted to alter my access permissions from the router, but made no headway. Again, I could read and write, as the router setup suggests, but not "modify," to use a windows term.
Assuming, with little data, that the FAT32 was perhaps at issue I unmounted the network drive, connected it by USB and reformated as above. After formating, I tried the same procedure with no change in outcome.
I am nearly 100% sure that when the drive was connected by usb, I could delete to my heart's content, but not when it is connected via network.
I will note that the drive is accessed by first connecting to the router, which the mac sees as a "PC." This access can be controlled, but can be set to anon.
When I connect I see two identically named folders. One is a sharepoint folder and one is a volume. They access the same data. Deleting thorugh either route has identical outcomes.
As I am a complete newb to Macs, I am really not sure where I should even begin to look for access. Should I bind my router access to my user acct? Is this even doable? Can I reset permissions to this folder through the terminal? Is this really a Cisco or Seagate issue?
Any knowledgable advice is appretiated. I can do the speculating.

Ugh.
This is not an Apple issue. This is a permission issue associated directly with the router. No settings on the mac need to be touched to solve this issue.
In this specific case, it was required that I enter into the router storage settings (192.168.0.1,) disable all anon access, save settings, log in as admin (or just r&w) PRIOR TO deleting the files, then delete the files.
I was trying to enter login info AFTER trying to delete the files. Obviously, that didn't work.
Anyway. I hope this might help someone.

PS- Network Teco - Undo ?

Similar Messages

Maybe you are looking for