PS: Setting Project Profile as a mandatory field for Project Definition
Hi,
I would like to know how to set Project Profile as a mandatory field for Project Definition (CJ20N or CJ01). I tried to look for controls at OPUK config but the Project Profile is not available for definition - either mandatory, optional, suppressed, etc. Would appreciate if you can share your expertise on this.
Thanks!
Regards,
Vivian
Hi,
I would like to know how to include some additonal fields in OPUK/OPUJ. We have defined some .INCLUDE component / fields to SAP standard table PRPS/PROJ. We want those fields to also appear in OPUK/OPUJ so that we could also defined their characteristics - whether input, mandatory, suppressed, etc.
Thanks!
Regards,
Vivian
Similar Messages
-
Mandatory Field for Entering Delayed Reason for project during scheduling .
Hi Friends
Here I have a question on "Scheduling"?
My Client want an mandatory field for entering the delay reason if any phase or tasks or project definition get delayed.
Your input would be highly appreciated
Regards,
YAGHAGHi Abhijit,
Thanks for your prompt reply.
I am implementing cprojects 4.5 in PLM 7.0 and not in PPM 5.0.
Regards -
Mandatory fields for mapping in ORDERS idoc.
Hi
I m working on File to idoc scenario for creation of sales order in ECC 6.0 , now I want to know what are the mandatory fields in ORDERS idoc which needs to be populated or else disbaled so that the sales order gets created properly in the ECC 6.0..
Pl let me know the method of finding mandatory field for mapping for any idoc and which fileds of idoc are to be disabled.
Pl help ..
ans will be rewarded .
thanks & rgds
mojibHI,
U can disable the control record segment and in the IDOC adapter use the option apply control record from payload.
If you have set the Apply Control Record Values from Payload indicator in the receiver IDoc adapter, the following fields are filled from the IDoc-XML payload:
· MESCOD
· MESCFT
· TEST
· EXPRSS
· STD
· STDVRS
· STDMES
· SNDSAD
· SNDLAD
· RCVSAD
· RCVLAD
· REFINT
· REFGRP
· REFMES
· STATUS
· DIRECT
· OUTMOD
· CREDAT
· CRETIM
read the information in below link:
http://help.sap.com/saphelp_nw70/helpdata/EN/ab/bdb13b00ae793be10000000a11402f/frameset.htm
thnx,
chirag -
Mandatory fields for BAPI_ACC_DOCUMENT_POST
Hi
I am getting the follwing data from the file (Which is coming from oracle) invoice number and the amount,
from that i have to use Fb70 tcode for posting ,Please help me what are the mandatory fields for FB70,
how will get those fields from SAP. How to use the BAPI ?
Regards
Pabshi
check out this thread
Re: BAPI_ACC_DOCUMENT_POST
hope this helps
regards
Aakash Banga -
hai,
what are the mandatory fields to create the datas for xd01.(customer master data).
regards
surenderHI
MANDATORY FIELDS FOR CREATING CUSTOMER DATA ARE:
Account Group---ktokd(field name)
Name---Name1
Search term----sortl
postal code----pstlz
country-----land1.
Regards,
vineela -
Mandatory Fields for IDOC ORDERS01 for Pricing Condition EDI1 to trigger
Hi ,
I'm Testing an Inbound ORDRSP using we 19 for Pricing Conditions EDI1. What are the Mandatory Fields for IDOC ORDERS01
Thankshello,
I think it's better to execute VA01 to create a sales order; in that way you should have an idea of mandatory fields.
Thanks. -
Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST
hi all ,
Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST
what all data i need to give to post a document.
Thanks and Regards
JKHi...
part of my source code:
** Header Data " Sending comp code
wa_documentheader-comp_code = 'XXXXX'.
wa_documentheader-doc_date = '20060620'.
wa_documentheader-pstng_date = '20060620'.
wa_documentheader-doc_type = 'XX'.
wa_documentheader-username = sy-uname.
wa_documentheader-ref_doc_no = 'XXxxxxxx'.
wa_documentheader-header_txt = 'Text Header.
wa_documentheader-bus_act = 'XXXX'.
*it_currencyamount
wa_currencyamount-itemno_acc = '1'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = 1943.
APPEND wa_currencyamount TO it_currencyamount.
*it_accountpayable
wa_accountpayable-itemno_acc = '1'.
wa_accountpayable-gl_account = '1234567890'.
wa_accountpayable-bus_area = 'DIV'.
wa_accountpayable-item_text = 'Text 1 XXxxxxx '.
wa_accountpayable-pmnt_block = ''.
APPEND wa_accountpayable TO it_accountpayable.
*it_accountgl
wa_accountgl-itemno_acc = '2'.
wa_accountgl-gl_account = '1234567890'.
wa_accountgl-item_text = 'Text 2 XXxxxxx'.
wa_accountgl-bus_area = 'DIV'.
APPEND wa_accountgl TO it_accountgl.
wa_currencyamount-itemno_acc = '2'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = ( 1943 ) * -1.
APPEND wa_currencyamount TO it_currencyamount.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
EXPORTING
documentheader = wa_documentheader
TABLES
accountgl = it_accountgl
accountpayable = it_accountpayable
currencyamount = it_currencyamount
return = it_return.
clear it_return.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
EXPORTING
documentheader = wa_documentheader
TABLES
return = it_return
currencyamount = it_currencyamount "currencyamount
accountpayable = it_accountpayable "accountpayable
accountgl = it_accountgl "accountgl
EXCEPTIONS
OTHERS = 01.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'. -
Mandatory fields for vendor master load
Hi Experts,
what are the mandatory fields for the vendor master upload? how can I find that?
Thanks for the help.In addition, you can also refer the links:
http://www.auditnet.org/docs/SAPR3AccountsPayable.txt
http://users.ev1.net/~gmorris/securitydocs/SAPR3AccountsPayableMatrix.doc
Hope thisll give you idea!!
<b>P.S award the points.!!! !!!</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise" -
Mandatory field for TIN No, or Contact Person
HI Expert,
Can anyone please tell me code for Mandatory field for TIN number or Contact person at the time of adding Purchase Order.its possible by SP i tried for it but its variable so pls anyone have any idea.
SudhirHi Sudhir,
Try This.
FOR Contact Person-----
IF EXISTS (SELECT DocEntry FROM [dbo].[OPOR]
WHERE
((CntctCode IS NULL OR CntctCode = '')
AND DocEntry = @list_of_cols_val_tab_del))
BEGIN
SELECT @error =1, @error_message = 'Your Error Msg1'
END
END
For TIN No.-------
IF (@object_type = '22' AND @transaction_type= 'A')
BEGIN
IF EXISTS (SELECT DocEntry FROM [dbo].[POR12]
WHERE
((TaxID11 IS NULL OR TaxID11 = '')
AND DocEntry = @list_of_cols_val_tab_del))
BEGIN
SELECT @error =1, @error_message = 'Your Error Msg 2'
END
END
Regards
Ashutosh T -
Mandatory fields for VF01, ME51, XD01, Co40
can anyone tell me the mandatory fields for the tcodes to do BDC:
VF01
ME1
XD01
CO40Hi,
ME51,VF01 -- No mandatory fields for these transactions.
XD01-- account group and customer number are mandatory.
CO40- Planned order mandatory.
Regards,
Jagadish. -
Make material as a mandatory field for a particular document type in PR
Hi,
Currently we are in SAP 4.6c version. There is a business requirement for making material as a mandatory field for a particular document type of purchase requisition as they don't want the user to raise non material purchase requisition using that document type. The field for material is currently not available in the configuration for Define Screen Layout at Document Level for purchase requisition.
So could you kindly let me know the possible options to prevent user from raising a non material purchase requisition using that document type. If not could you kindly suggest me the user exits available at the time of saving purchase requisition which i could use so that we can write a code to check if the material number is entered or not. If not entered prevent the user from saving the purchase requisitions.
Also it would be helpful if you could let me know how the fields for enjoy transaction (like material,document type) can be made available for selection in the configuration for Defile Screen Layout at Document Level for purchase requisition.
All you help in the solving the above problem is highly appreciated.
Thanks & Regards
RamHi,
Check below method works out for you, if you do not want to proceed with any ABAP development.
Have a custom field selection key with Material Description field as "Mandatory" and "Display" in Basic Data, Item selection group.
Assign this to your PR document type which need material as mandatory. With this you are making user to enter material indirectly as mandatory & user will not have an option of entering text which avoids indirect / service procurement.
"Material Group" option won't help as User can have default settings with some value and it updates even in display mode of field.
Regards,
Ram
Edited by: Ramprashanna S on Jan 11, 2012 11:51 PM -
Grey field for project definition and WBS element
Dear all,
I have created a project and WBS element in CJ01. Now I go via CJ02 to the change mode and the project ID and WBS element ID is not greyed out. But I would like that the system shows these key fields as not changeable anymore, only fields like description should be changable. Can you please tell me, which customizing step I missed to get the grey field for project ID/WBS element ID?
FYI I do not use a project mask to create the project.
Thanks for your answer.
HeidiHi Heidi ,
I don't think you can grey out the Project Definition and the WBS Element fields after the creation .
If you want to restrict the users to change the Proj definition and WBS , a better way is through
Authorization objects and restricting only specified users to change the WBS
Kish -
Set mandatory fields for MSC2N, MSC3N
Hi,
I have done the configurations in Edit Field Selection Control in Batch Management. I've set the mandatory selection for all msc*. But seems it only works for MSC1N, not the others.
Can someone tell me why and how correct it.
Thank you.Go to SHD0
Enter your required tcode e.g. msc3n
Enter screen varient name
mark fields as mandatory u want.
I recomend to creat another tcode if u change settings as I said. -
How to remove mandatory field for Last Name in Personal Data Editing Screen
Hello All,
CUrrently we are using BP_ ERP5ESS1.31 SP5 & SAP_ESS 603 SP5.
All my ESS Services are Displaying fine and working from Portal.I am having the requirement like I need to make Last Name as Non-Mandatory field in Personal Data. While Editing the PD Screen, there i will find the * mark for Last Name filed, i checked through the Global Personalization Make as Mandatory is Not Personalized its showing, i think its defualt prpoerty,so i am unable make any changes from Portal w.r.t Global Personalization.
I checked in SPRO-- Personal Admin> Custmomizing User Interfaces>Change Screen Modifications, there i find the respective Module pool for those Infotypes and country Specific..
I cheked forModulePool MP000200--> P0002 and Variable Key-40(For India) P0002 - NACHIN -- LastName only OF Radio Button is Selected all other Rado buttons are not selected.
I Checked in V_T588MFPROPS view there for 0002 Infotype P0002 -- NACHN Mandatory check box is Checked all other check boxes are Unchecked.
How to make that Last Name field as Non-Mandatory in Personal Data Edit Screen, where i need to make the changes.'
Please list out the Steps..Where i need to do the configuration. And i assigned all the required ESS roles on the backend.
Thanks in Advance
AdapagHi,
I don't think supressing through Global Personalization will change the business logic. Within the Business Logic it checks for the mandatory field.
After the changes I guess you need to make the changes accordingly.
The below link might be of some help.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=profile&title=ESSPersonalInformationUIenhancementwithoutmodification&decorator=printable
Please correct if I am wrong.
Cheers-
Pramod -
Manage Person - Mandatory field for Singapore
Hi,
User requirements have changed and what seems to be marked as a required field for new people in Singapore (field is "Legal Name") is no longer required. I was not involved in the initial implementation.
The only place I've seen to add/remove required name fields and set a mandatory flag is under the "Manage Person Name Styles" task - but when I try to remove it there I get the following error:
Warning: You cannot deselect a name component that is predefined as required. (PER-1531563)
You cannot deselect a name component that is predefined as required. (PER-1531563)
Can anyone help ? Much appreciated!Hi, Have you looked if the name fields are set to required in a customization? The documentation that details how to manage customizations is here.
Maybe you are looking for
-
How to make a BPM restartble at a specific point after error?
Hi, I have a somewhat very simple question. I have a BPM that works like this: 1. receive message A 2. transform message A to message B (using valuemapping) 3. switch with a condition determining if valuemapping was succesfull for all cases. 3.1. Bra
-
I have 2 queries that I do an "union all" and then an order by after the "union all" This seems to be extremely slow. But when I run the queries individually, they are really fast. Could some help me out with this please. SELECT * FROM (SELECT a.*,
-
I didn't notice the problem while filming, but after transferring the tape to my computer, I can see that there's flickering in the footage I shot. I think it may be caused by the lighting from the venue. Is there anyway to fix this, with Final Cut P
-
Where has search view gone in Leopard
Hi Below is a feedback that I have sent to Apple regarding my user experience with Leopard and how things have changed, with the disappointing loss of features and functionality that was present in Tiger. I place this oversight, on Apple's part, on t
-
Error while appending to table BAPISDITM
Hi all, While appending a Z field to the table -BAPISDITM i am getting an error message. Error Message "Field name ZZBRIDGE can already exist in a subsequent system" Please suggest. Regards, Neslin.