PS Tool Palette Not visible from Aperture 2 Edit

I have looked through the manuals, but haven't found anything on this problem.
I have an image I want to edit in Photoshop Elements 4. When I make the request in Aperture, PS loads up, but the only thing available is the burn and dodge tools at the top. The entire tool palette is no where to be seen.
Why is this the case? How do I get a file to load up so I can use PS to edit it in full capability mode? I have Aperture exporting it to PS as a PSD format.
Any suggestions or council?
Thanks.
Matt

I assume you're choosing "Edit with" from the Images menu, but are you certain you're not choosing the "Dodge and burn" sub-choice, just under the Adobe Photoshop sub-choice?

Similar Messages

  • Tools palette not visible or accessible

    I have been using the particular installation of Labiew (V 6.0, under Windows XP) for a long time without the following problem.  All of a sudden, one day, the Tools Palette was not visible, and I was not able to get it back.  Tried, of course, clicking "Window >> Show Tools Palette" but this does nothing.  I can still cycle through some of the tools using the keyboard (Tab and space bar).   Tried cold rebooting -- nothing.  Hopefully, I don't have to reinstall. 

    Here's something to try...perhaps the Tools palette location got stored in the LabVIEW INI file with some funky location, such that it is showing up, but not within the visible bounds of the screen.  I'm not sure what the INI entry would be, but it's probably something human readable, like "ToolsPalleteLocation="2000,2000".  If you see an entry like that, delete it and restart LabVIEW.  But if you don't see anything immediately obvious, you could close LabVIEW, delete (or rename) your LabVIEW INI file, relaunch LabVIEW, and see if your Tools palette shows up again.  If so, then it's definitely something fishy in your INI file.
    Also, I seem to recall from my days long long ago in the AE department that there might be a KnowledgeBase entry, or a previous Dev Exchange post, on this issue.  So if my suggestion is no good, try checking those resources.
    Good luck,
    -D
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Actual and Forecast not visible from Planning App -- VERY CRITICAL ISSUE ,

    this is a very critical issue.. need immediate help..
    my customer cannot see the Actual and Forecast not visible from Planning App. please help me with the same. tell me the possible solns as i cudnt have a web confrerence with the custmer till now.
    thanks/

    John ,
    they are seeing the application in planning. they created a scenario dimension containing , budget, actual and forecast.. but in the planing application they can only see budget. the rest 2 are not visible.
    thanks..

  • Mail send from iPhone not visible from Macbook

    Any mail I sent from my iPhone (latest OS) is not visible from my Macbook Pro (latest OS) in the sent box. 
    I need this to be fixed. How? I have read through the forums and there seems to be no fix to this. And yes, I have everything configured properly (ie. to keep sent messages on server, etc).
    Any help to fix this would be appreciated as I need to access all my emails for work from my computer.

    Please ignore the above .  I have discovered what I did wrong - but don't know how to delete the question!
    Sorry

  • Export from Aperture to edit in Windows Live Photo Gallery

    Hi.
    I'm hoping to work collaboratively with a colleague, in a scenario where I take & edit photos, then pass them over for a possible final touch up before being forwarded to clients.
    I use Mac OSX 10.6 and Aperture. He uses Windows Vista and Windows Live Photo Gallery.
    The problem we've come up against is this: he is unable to edit the image I've exported from Aperture. I'm exporting as .JPG, and he's able to read them ok - i.e. load it into Windows Live Photo Gallery, but not alter the image.
    Does anyone have a similar workflow, exporting from Aperture, then editing in Windows Live Photo Gallery?
    Thanks in advance,
    PB

    Hi Frank.
    Thanks for the response.
    Agreed, the pertinent question is why can't my colleague edit the JPG exported by Aperture. It's probably also worth pointing out, the same problem occurs with JPGs exported from iPhoto.
    The Windows software usually plays nicely with JPGs by all acounts, just not the ones I send - which I do via eMail or my public space on Mobile Me incidently.
    So, another key question is: all settings being equal (color profile, quality, etc.) are the JPGs as produced by iPhoto and Aperture indistinguishable from those produced by other apps on other platforms - i.e. does the use of JPG enforce a common standard?
    If that is the case, I suspect ours might be a permissions issue.
    According to the Microsoft support page on editing in Windows Live Photo Gallery, the inability to edit a picture is commonly caused by unsupported file type, or read-only attribute set on the file.
    Unfortunately, he and I are not in the same place, and he's not particularly au-fait with this type of problem solving. Hence, before involving him, I'd like to know:
    1. it's possible (i.e. someone else does it), and,
    2. what's involved (at my end and/or his).
    Thanks again,
    PB

  • Profile description is not visible from Application which the LDT file has.

    Experts,
    I am running into strange issue.
    Dev created a LDT file for a profile and requested to upload it through a one-off patch.
    The profile got updated into the DB for all the 3 languages - US, KO and AR.
    However the description is not visible for US when tried to verify from the Forms.
    Further analysis gave a tip that the description is NULL only for US and exists for other 2 Langs (KO and AR).
    SQL> select PROFILE_OPTION_NAME, DESCRIPTION, LANGUAGE, LAST_UPDATE_DATE, LAST_UPDATED_BY, CREATED_BY, CREATION_DATE
    2 from fnd_profile_options_tl where
    3 profile_option_name='INL_ITEM_CATEGORY_SET';
    PROFILE_OPTION_NAME DESCRIPTION LA LAST_UPDAT LAST_UPDATED_BY CREATED_BY CREATION_D
    INL_ITEM_CATEGORY_SET {Category Set to determine the items that will be  AR 09-NOV-12              122        122 11-JUL-11
                              LCM trackedسÙÙ
                                             اÙ
    ٠سÙÙ
          اÙ
    ٠سÙÙ
          اÙ
    ٠سÙ}
    INL_ITEM_CATEGORY_SET {Category Set to determine the items that will be  KO 09-NOV-12              122        122 11-JUL-11
                              LCM trackedâ
                                          ¦'+++ '+++ '+++ '+++ '+++ '+++ '+++ '++
                              +Ã
    INL_ITEM_CATEGORY_SET                                                                            US 12-MAR-12             *2330*        122 11-JUL-11
    SQL>
    Also identified the Last Updated By is from FND User - "PROCESS_OPS"
    SQL> select USER_ID, USER_NAME from fnd_user where USER_ID in (122, 2330);
       USER_ID            USER_NAME
           122               ORACLE12.2.0
          2330              PROCESS_OPS
    SQL>
    What could be the reason behind this change?
    Why the profile description only for US Lang is not getting updated whereas for other languages it got updated by FND User - "ORACLE12.2.0"?
    It clearly shows on 09-Nov-12 there were some changes happened and that to by User_ID 122 which updated for KO and AR.
    For some reason the same was not applied for US Lang.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    HI Hussein,
    I am waiting for your update only.
    We have requested Dev to chek the same got to know that,Yes, when tried with CUSTOM_MODE=FORCE, it is working fine.
    But they are insisting on how the other Langs got updated and why it would not update for US alone.
    Just check the Profile from FND_PROFILE_OPTIONS about the profile details and found below.
    SQL> select APPLICATION_ID, PROFILE_OPTION_ID, LAST_UPDATE_DATE, LAST_UPDATED_BY, CREATION_DATE, CREATED_BY
    2 from fnd_profile_options where PROFILE_OPTION_NAME='INL_ITEM_CATEGORY_SET';
    APPLICATION_ID PROFILE_OPTION_ID LAST_UPDATE_DATE LAST_UPDATED_BY
    CREATION_DATE CREATED_BY
    9004 1011555 12-MAR-12 2330
    11-JUL-11 122
    SQL>
    For some reason the TL got lastupdate_date and 09-NOV-12 and the same is not reflecting in FND_PROFILE_OPTIONS.
    Please advise.

  • Dialog not visible from sidekick when using dialog participant step

    I am using the Out of the box dialog participant step in my workflow. I have created a dialog and using in the dialog participant step. When i start the workflow, the dialog is only available/visible when I complete the task from inbox and not visible when completing the task from sidekick.
    Any suggestions/pointers are Appreciated.
    Environment : CQ 5.5, Windows 7

    Unfortunately, It is known issue.  Please file daycare & provide the business importance & a schedule.

  • Hd connected to my bbox not visible from iMac. the message : La version du serveur auprès duquel vous essayez de vous connecter n'est pas prise en charge

    le disque dur FAT32 connecté à ma BBox Bouygues n'est plus visible de mon IMac depuis Mac OS X Lion.
    j'ai le message suivant systématiquement quand je clique sur l'icône BBox :
    La version du serveur auprès duquel vous essayez de vous connecter n’est pas prise en charge

    Hi Mac Attack,
    My computer will not disconnect from the internet.  It seems to find a clone router and continues even when I shut down and unplug my my own home iy
    Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
    If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
    Have a look at your settings in Safari > Preferences. Especially General and Privacy.
    Reset Safari to remove cookies and other stored data.
    System Preferences > General
    Have a look at your settings in System Preferences >  Security & Privacy.
    Call back with more questions.
    Regards,
    Ian

  • HT3529 I can't seem to use the imessage app as the icon is not visible from my home screen is it possible to reinstall one?

    I could not send messages via imessage. The imessage icon is not visible on my home screen; however, when i type it on search bar the app appears. I it possible that i have deleted the app? If i did, can i reinstall one?

    Go to Settings>General>Reset>Reset Screen Layout. The app/icon is just somewhere where y can't find it.

  • Illustrator CS - Tool Palette not showing

    I am using Illustrator CS and for some reason there is no option to view my tool palette. I have searched every option in illustrator but there is no option for the tool palette. I can't figure out what the problem is. It is hard to use illustrator without the tool palette. Please Help me resolve this problem

    Anthony,
    It is time to FAQ #2, or to
    Move the folder

  • Mavericks disk not visible from Windows 7 Bootcamp

    Mavericks disk is not visible under Windows 7 Bootcamp. Every other drive in the machine and everything else on the network shows up. Any ideas?

    CoreStorage logical volume groups (1 found)
    |
    +-- Logical Volume Group 760EBA5D-A4B0-49CD-B1BA-087764922062
        =========================================================
        Name:         Untitled
        Status:       Online
        Size:         2999733223424 B (3.0 TB)
        Free Space:   0 B (0 B)
        |
        +-< Physical Volume 5A04D434-DEAC-4D83-ACDB-0EE9BFE6E686
        |   ----------------------------------------------------
        |   Index:    0
        |   Disk:     disk2s2
        |   Status:   Online
        |   Size:     2999733223424 B (3.0 TB)
        |
        +-> Logical Volume Family 762D431D-888C-489A-854C-F2151D121F99
            Encryption Status:       Unlocked
            Encryption Type:         None
            Conversion Status:       NoConversion
            Conversion Direction:    -none-
            Has Encrypted Extents:   No
            Fully Secure:            No
            Passphrase Required:     No
            |
            +-> Logical Volume 96DD2E04-244F-4559-9C89-2DAE309B4994
                Disk:                  disk4
                Status:                Online
                Size (Total):          2999414448128 B (3.0 TB)
                Conversion Progress:   -none-
                Revertible:            No
                LV Name:               Thurgood
                Volume Name:           Thurgood
                Content Hint:          Apple_HFS

  • Wifi printer not visible from wireless devices after becoming a wired printer

    Lexmark S515 printer: Wireless worked fine for about a year, now it doesn't stay connected to my EA-4500 router (I suspect the printer wifi radio is flaking out).
    So I hooked it up via ethernet cable to my EA4500 router.
    Now, I can only access ther printer (static IP: 192.168.1.101) from other wired devices on the EA-4500; can't access it from  wirelessly connected devices.
    Anyone know what I should change to get it to be visible from wired and wireless devices on my home network?

    Try to check what's the IP Addresses of your wireless devices. Powercycle your whole network - unplug for 10 seconds and plug them back again. Start with the modem > router > printer > computers/wireless devices. You can also try connecting your printer directly to your wireless laptop and check if it can detect the printer.

  • IMAQ write palette not visible

    I have installed NI Vision 2011 but IMAQ write file vi is not visible but IMAQ write file 2 vi is visible. No idea what is the problem.
    I am using labview 2011 on windows 7. 
    Kudos are always welcome if you got solution to some extent.
    I need my difficulties because they are necessary to enjoy my success.
    --Ranjeet

    Write2 replaces Write.  It handles file formats differently.  I believe there is a legacy option during install that will put these earlier versions of Vision VIs into a separate folder, if needed.  Check the Device Drivers Install CD, and DVD 2.
    Machine Vision, Robotics, Embedded Systems, Surveillance
    www.movimed.com - Custom Imaging Solutions

  • SP 2010 Publishing - Rollup and Page Images not visible when entering page edit mode

    All:
    Hello, I have an odd issue recently appearing after installation of FEB 2013 CU install. When users select to Edit a Publishing Page the Rollup Image and also Page Image(Article Page Layout) are not visible. Only the "Click here to insert Image from
    SharePoint" link is visible.
    The issue has be confirmed in 5 servers across two farms
    DEV, QA, and PROD on client recently updated
    DEV and PROD in a completely separate client farm
    I have confirmed the issue does not exist in two separate farms running April 2012 CU. In both of those environments the image appears with issue even in Edit page mode.
    In the farms where the issue exists you can click the insert image link and simply hit OK to see the image again. An easy enough work around for tech savvy but my client's content admins are very confused/frustrated by.
    Is this a bug? I have confirmed in two separate farms including brand new web applications using out of the box publishing site templates.

    Hi.
    We have been facing the same issue in a 2013-environment (SP1), but in this case an upgraded 2010 Solution, which still runs in 2010-mode. Because of this, SharePoint still use resource-files in the 14-hive (as we have not performed an upgrade of Master
    Pages etc.) The problem is also reproduced on a clean 2010 Site Collection in the same 2013-environment.
    I have managed to find the cause of the problem (at least in our environment), and that is that as long as the selected picture/image has
    not defined an "AltText"/"Alternate Text" the problem seems to occur.
    In other words, try to define an Alternate Text and click OK in the "Edit Image Properties" Dialog.
    I don't know if this may be the case for everyone else, but give it a try.
    From this, I've further discovered (after hours of js-debugging) that there is a minor change (from 2010 to 2013) in a js-file called "SelectorControls.js" which is responsible for updating the various controls used in Page Layouts etc.
    The problem exist in a method called ASO_UpdateButtonsAndPanels(), which checks whether the Image Control in question has content or not (Url). The local variable "hasContent" is then determined of an if statement, if(this.AssetData.ManageLinkDisplayText)
    which in 2010 (14-hive) seems to be "true" regardless whether the Control is of type Image or Hyperlink. Further the code checks for AssetText (Alternate Text) which on an Image may be left empty.
    In 2013 (15-hive) however, this if statement has been changed to, if(this.SelectorType==ConstLinkSelectorType), which clearly states "Image" or "Link" depending on the type of control.
    I don't know if this is the cause of the problem in 2013, but in 2010 it seems to be exactly that.
    Pending a solution from Microsoft, we have modified SelectorControls.js to overcome this issue until the customer decides to do a Visual Upgrade to 2013.
    This is by all means not a supported nor a a permanent solution to the problem, as future Hotfixes, Service Pack etc. may "reset" our fix.
    Below is a copy of the working solution:
    function ASO_UpdateButtonsAndPanels()
    {ULSuBa:;
    var hasContent=!!this.AssetData.AssetUrl;
    //SharePoint 2010: ManageLinkDisplayText is always "True"
    //var hasContent=!!this.AssetData.AssetUrl;
    //if(this.AssetData.ManageLinkDisplayText)
    //hasContent=hasContent && !!this.AssetData.AssetText;
    //SharePoint 2013
    //var a=!!this.AssetData.AssetUrl;
    //if(this.SelectorType==ConstLinkSelectorType) a = a && !!this.AssetData.AssetText;
    //Fix for preventing existing selected image to disappear when saving page and/or editing a page with existing image.
    if(this.SelectorType!=ConstImageSelectorType)
    if(this.AssetData.ManageLinkDisplayText)
    hasContent=hasContent && !!this.AssetData.AssetText;
    if( hasContent )
    if (this.ClearAssetButton !=null)
    this.ClearAssetButton.EnableButton();
    this.GetAssetSelectedPanel().style.display="inline";
    this.GetEmptyPanel().style.display="none";
    else
    if (this.ClearAssetButton !=null)
    this.ClearAssetButton.DisableButton();
    this.GetAssetSelectedPanel().style.display="none";
    this.GetEmptyPanel().style.display="inline";
    I hope this helps anyone else struggling with the same problem.
    Thanks!
    Øyvind

  • MobileMe albums not visible in Aperture after upgrade from iPhoto

    I've just upgraded from iPhoto to Aperture and all went well, except that my mobileme albums aren't appearing. I published a test album which worked, but my existing ones don't appear.
    I've read on another thread that a dodgy character in an album name caused a similar problem but I can't see anything that looks odd in my mobileme album names.
    Any ideas?

    I had the exact problem and found the solution here.

Maybe you are looking for