PS11 Organizer. how 2 move 1 file(folder) into another? drag & drop doesnt work...

as it does in Win. also how can i create a new file/folder to put other files/folders into. ex a new folder names "Flowers" then put all the other files that contain flowers such as folder "red roses" into the "main" file of Flowers. Cant figure it out even using the book The Missing Manual. Thanks sara

It sounds like this question is for Photoshop. This is a Flash forum. In any case, is your question about real folders on your computer, or server, or are asking about the files and folders in the "Layers" panel? Or, is your question about using the Library panel in Flash?

Similar Messages

Move a large folder into another folder without the need of a time machine backup?

I have a large folder (FolderX) about 40GB and i was wondering if it is possible to move the folder into another folder, but also move it in my time machine backup so it won't see the need to backup, because it will cost me a extra 40GB of storage while the folder is allready on the backup HD.
So to give a picture:
Current situation:
Macintosh HD > Users > Username > Documents > FolderX
Wanted move:
Macintosh HD > Users > Username > Documents > Work > FolderX
Is this possible?

Did you copy the TM files, or move them? If you moved them, the repository is destroyed. Erase the volume and start over.

Images I move from one folder into another are disappearing, at first it was occurring immediately if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location.

Images I move from one folder into another are disappearing, at first it was occurring immediately and only if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location. A few of these images had copies in another folder that remained and the ones I couldn't find may or may not have ever had copies. I had backed up my system with time machine recently as well, so I went into the backup to retreive the lost images. When I searched and found the backup copies I got the error "the file alias cannot be opened because the original cannot be located". The crazy thing is that the images that remained on my computer did not give me the same error and opened like they should.
In short images that I am creating, saving, and using are disapearing so epically that even time machine versions are affected when retrieval is attempted. Any suggestions as to what I could be doing wrong without realizing it? Or perhaps other people have had similar bugs that are software related and have a solution?

Hi Kevin,
I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
Best

How to move a selection into another selection in elements 12

how to move a selection into another selection in elements 12

Open picture B, the one you wish to select something from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position object from picture B.
In the layers palette you should see picture A as the background layer, and object B on a separate layer

Why can't I move a take into another folder?

I've been beating my head against this for days. Seems like I'm missing something really simple. I have two tracks, each of which have folders with a number of takes. I just want to drag a take from one folder into another.
I get that you have to hit that little button in the top right corner of the folder to allow you to grab something. But when I grab a take, it only allows me to drag it around within that folder, and not into another folder. I've searched high and low, what am I missing here? Or is this a bug?

Try unpacking the folder (the region menu).

Function module for transfering a file contents into another?

Hi all,
Is there a Function module for transfering a file contents into another?That is the whole content from a file to other??
Regards,
Shashank.

Hi,
I think there is no such FM. You need to read the data in internal table and then write it in another file.
Regards,
Atish

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

When clips won't play without rendering in the Timeline, it usually means that the clip's specs don't match the Sequence settings.
A .mov file could be made from any number of codecs; the QuickTime Movie designation is merely a container for video files of all kinds. Since FCE only works with the QuickTime DV codec and the Apple Intermediate Codec (AIC) natively, if your mov files aren't one of those two, you need to convert them PRIOR to importing into your FCE project.
-DH

How to recover photos from device that screen doesnt work, and didn't use cloud or a memory card. (chip)

How to recover photos from device that screen doesnt work, and didn't use cloud or a memory card. (chip)

I'm sorry to hear you no longer have access to your pictures ItzKB11. I know they're important, we'll do everything we can to help. However, since you did not back them up to any source and the screen does not work, we only have a couple options. Try using the USB cable to tranfer to PC:
From the Device to a Computer
• Launch Windows Explorer.
Using the computer keyboard, press Windows E ( E) keys.
Alternatively, right-click Start then click Explore.
• Using Windows Explorer, navigate to:
• SCH-I545 > Phone
• Utilize the computer to copy video/picture files from the following folders into the desired folder(s) on the computer's hard drive:
• DCIM
• Download
• Movies
• Pictures
• Disconnect the USB cable from the computer.
If you're unable to retrieve them that way, use this http://vz.to/1zyIQwo.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Canon Scan to Folder (Server 2008 R2) suddenly doesnt work

Canon Scan to Folder (Server 2008 R2) suddenly doesnt work
We have a few Canon Multi Functionals who have been able to Scan to Folder to our Server 2008 R2 File Server.
Since last Windows Updates(13 sep 2012) it doesnt work anymore...
Nothing has changed to the folders or shares. Shares are like:
\\fs01\scans\IT
Shared folder is \\fs01\scans
Share permissions are Full for Everyone
On the folder IT, only the IT department and the Canon Scan user have full conrol...
When I turn off the Windows Firewall on the FS01, it works.
Then i get a SMB = OK on the Multi Functional.
When I turn on the WIndows Firewall, i get a SMB = NG on the multifuntional
I checked the rules, and everthing concerning File and Printer Sharing is allowed...
Can anyone please think what to do?
Because really don't want to go on with the Windows Firewall Disabled.
The Endpoint Protection 2010 Anti Virus is installed on the FS01, but since disabling the Windows Firewall works, i don't think the Anti Virus has anything to do with it.
Update: I just tried it to two other Servers 2008 R2 (with also the Windows Firewall on) and it works! So there is something wrong with that one Server... But as far as I can see, the firewall has all File and Printer Sharing things open...
And when i log on with the Canon Scan user on a PC i can browse to them locations just fine. I also reset the firewall setting to default and reopened the printers and sharing settings

The canon surelly do a check on another port that is not allowed in your firewall.
Run a wireshark on that server. Filter ip.src == ip of a canon.
Check on what port the canon talk to your server and open it.
Last option, does your printer are in another vlan/lan ? Maybe a firewall rule that does not see the printer in your local lan. Thus the rule might block it now.
MCP | MCTS 70-236: Exchange Server 2007, Configuring
Want to follow me ? | Blog:
http://www.jabea.net | http://blogs.technet.com/b/wikininjas/

My iphone 4 is stuck on the reboot logo, ive ried holding both home and power to shut it off snd then keep holding home to let you plug it into itunes but it doesnt work. what do i do?

my iphone 4 is stuck on the reboot logo, ive ried holding both home and power to shut it off snd then keep holding home to let you plug it into itunes but it doesnt work. what do i do?

Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore

I bought a used sprint 4s and tried to put my motorola sim which is also on sprint network into phone but it doesnt work is there something i need to do to make it work or am i SOL?

I bought a used sprint 4s and tried to put my motorola sim which is also on sprint network into phone but it doesnt work is there something i need to do to make it work or am i SOL? major problem is that my current motorola phone is issued to me from my employer but phone ***** so i want to upgrade to the ipone i purchased but it still needs to work like my company phone as they pay the bill. help me pls

A Sprint iPhone uses CDMA when in the US. The SIM is used only when not in the US.
To use it in the US, you have to have Sprint activate it, but it is unlikely they will activate in on your company's account.

How can I move a folder to another catalog using LR 3

I have imported a large amount of folder into cat#1, but now i have decided to create cat#2. I have tried to move the "folders" and not "catalog" using the following workflow:
1- Opening cat #1, make selection of folder to be moved
2- Go to file and select "Export as a cat".
3- Opened cat #2, go to File and select "Import catalog"
4- Importing window shows the entire list of folders I had imported previously (lots of them). They all are checked. I can see the path, but only see the location of the folders, but I can't read the name of the files. I am able to see the total number on each folder
5- I have not even considering "synchronizing" the folder
Oh another thing, when I go to cat#1 and locate the folder I "exported as a catalog". The folder still shows on cat#1, but I don't see it on cat#2. I guess because I didn't complete the task.
I find it very tedious process trying to locate the file. And this is where I'm stuck
I have searched so many ways to find a workflow that would make sense, but I tend to get nothing but responses about how to move a "catalog". I have been thinking doing the following:
1- Remove the folder from cat#1
2- Open cat#2 and import the same folder, but this again seems to redundant, boring and a lot of clicking. Any suggestions.

Hm... Well, for everyone else the reply link is still on the website, and works fine soo....
Tell me about it. I went to catalog #2 and I didn't see the exported
catalog. Then I went back to catalog #1 and I still can see the entire
folder that I had selected to Export. I double checked it the process and it
seemed ok, but apparently there's something missing to complete the export
You seem under the impression that exporting as a catalog removes the images from the first catalog. This is not true. As I said earlier, it makes a copy for you. So of course, when you go back into catalog1, all of your images/collections/etc, are still there. As they should be.
So, you say you didn't see anything in your exported catalog? Are you sure you are opening the same catalog you just exported, or have you opened a new blank one that you created, accidentally or not? That would be my guess.
I think you should start over, and very carefully take it one step at a time.
Dj has suggested not using include negatives, and I can see where that might be useful. However, if you do that, you will end up having images from two different catalogs in the same folder. This will cause problems if you ever use the "sync folder" option, as it will attempt to load all images in that folder into your current catalog. Which means you could easilly end up with all your images in both catalogs. Messy. So to avoid this, use a new place instead. You can also avoid having to do the "import to catalog" step by exporting the negatives at the same time. Don't worry about exporting previews, though.
First, find a new place (external disk, whatever) to create a new catalog in. Do _not_ create the new catalog your self! Make sure you are sending everything to a new place!
Now, go into catalog1, and select all of the images you want to export. They have to be selected, or nothing happens, and you'll just get a blank catalog.
Now, export as catalog those images into the new location, and make sure you are copying the negatives too! Double check before you hit go!
Now, using LR, open that new catalog; you can either double click on the new one, or browse to open it. Either way. Verify that your images are in the new place and everything looks good. You can see in the Folders tab on the left panel to make sure the images are in the right place in the new folder.
At this point, you should have 2 and a half catalogs; your new catalog with only the images you exported, and the old catalog, with all of your images.
Now, you have a couple of choices. But before you do either of them, make sure you backup your system, including all of the images in the original catalog. If you've messed up making the new catalog (you should be able to tell!) then you want to make sure your original catalog can be restored.
Open your original catalog again, and now remove all of the images you exported. You will need to use the "remove from disk" option, as they will stay in the folders if you don't. This would cause the above problem with "sync folder", and of course, use double the disk space.
You can obviuosly see why I said to back everything up first; if you messed up the export by not including the negatives, you could easilly delete your originals, and not have them _anywhere_, in which case you would have to restore from back up and try again.
You now have two separate catalogs.
Remember, backup everything first, and good luck!
Cheers!

How move file with space in the name to another foler on Linux from ABAP?

Hi experts,
My requirement is to move the file on Linux to another folder via ABAP program.
IN SM49 is defined ZMOVE command for "mv" operating system command. In ABAP, fm:
SXPG_COMMAND_EXECUTE calls ZMOVE external command to move the file to another folder.
But in case that file has space in the file name, then the fm gives error and the file can not be moved.
I have tried as given in the Note 1152084 - Parameter for external commands but it doesn't work.
Don't know if the reason is that the note is for Windows or Unix and we have Linux.
So, I have tried with ''%file name%' and '''file name'''.
PLease advice hoe to move file on Linux to another folder from ABAP program if the file has spec in the name.
Thanks in advance.
Kind regards,
Danijela Zivanovic

Hi,
You can also try :
mv "file\ name" /<path_to_new_dir>
(Put "\" before each space)
Regards.
Rajesh Narkhede

How to insert apex_application_files file content into another table?

Hi All,
I am using Apex 3.2 on Oracle 10g.
I have used 'file_browse' item to upload a spreadsheet file into apex_application_files table.
I would like to populate another table with the contents of this spreadsheet file from apex_application_files.
I have spent almost 2 days looking for an answer on how to do this.
Can you please tell me how to do this or point me to a good resource?
Thank you,
Naushad.

Hi Thanks,
I did see this code, but this is not what I was looking for. This code simply inserts the file into another table, but I was looking for the contents of this file (eg. a single column spreadsheet with 10 lines and all ten of these lines to be inserted as rows in a table) inserted as rows into another table.
I managed to implement this by following below link:
http://nzchaudhry.wordpress.com/2011/07/18/uploading-csv-using-oracle-application-express-apex/
Thanks to all of you.
Naushad.

How can you import a canon mxf file (folder) into motion5

I import the full folder into FCP 7 (no problems) but if i want to go straight into Motion 5.0.2 has anyone any ideas how to import the Canon MXF file or the folder?
I have tried drag and drop and file/import etc without any success so far.
p.s. I do not have FCP X
Alan

http://www.musitek.com

PS11 Organizer. how 2 move 1 file(folder) into another? drag & drop doesnt work...

Similar Messages

Maybe you are looking for