Ps2 mouse and usb problems

sometimes when using my logitech cordless mouse on the ps2 port it will lock up, i have to unplug it and put it on the usb port instead to get it to work.
other times it stops working on usb.
a freind with the same board has the same problems with his typhoon cordless mouse.
any ideas ???

Same problem here with my Destop Optical Cordless from Logitech (Keyboard + mouse)
I must admit I changed MB and installed my actual 875P Neo FISR without reinstalling windows XP, I just made a repair install to detect new hardware since XP refused to boot when I changed MB.
Then, on a basis of 1/2, when I reboot the system, my cordless PS2 mouse wasn't detected, and this is really 1 windows start on 2.
I just unplugged the PS2 connection of the receiver, including the keyboard and mouse, and used the single followed USB cable (part of keyboard cable) to plug the wireless receiver. Now my mouse and keyboard work perfectly through a single USB connection for both.
I thought it was maybe not enough power delivered to the wireless receiver through the PS/2 port
If your problem persists on USB, it's clear the explanation is elsewhere

Similar Messages

PS2 mouse and USB Kb don't work with K8n Diamond

Hi all,
So, I've a USB keyboard and a PS2 mouse, on every boot the mouse freeze but the keyboard work.
If I connect a PS2 keyboard (and unplug the USB keyboard), the PS2 mouse works.
I've read the posts on this forum but I don't find the solution
(sorry for my english)

Up plz

10.4.7 update and USB problems

I have been experiencing problems with my USB devices (other than my Apple mouse and keyboard) since updating to 10.4.7. I have a card reader, a Palm device, a USB midi keyboard and a digital camera dock connected to a USB hub connected to the back of my Studio Display.
Randomly they start to beep like they do when the system boots or they are connected or reconnected without anything or anyone touching them. Sometimes they just beep, other times I lose functionality until I disconnect and reconnect the hub or device.
I have disconnected all, and connected just one or another (without the hub as well) but no matter what is connected I still get the same issue of the system thinking the devices are connecting or disconnecting at random times. This is new with 10.4.7, as I have had the same hardware connected as far back as 10.2. Anyone else having this problem, loss of USB functionality or sollution for such since updating to 10.4.7?

I too am having many of the same issues as all of you. I have my keyboard, mouse, and printer hooked up to a NEC USB 2.0 Manual Share Switch Hub. The hub is connected to a non-factory USB 2.0 card I installed in my PowerMac. Before the 10.4.7 update, I had none of these following problems.
Everything works and has worked great until I put the computer to sleep. Upon waking, the USB hub refuses to acknowledge my computer. I also get two strange beeps as it is waking. And because my input devices are hooked up to the hub, I am unable to do anything but restart the computer, upon which all becomes well again with the usb hub.
I defintely prefer to put my computer to sleep rather than restarting it everytime. Hopefully apple provides a fix soon; I really don't feel like messing with extensions. I could always revert back to 10.4.6, but I guess I was being optimistic that the fix would come soon. APPLE, get on it!
PowerMac G4: Dual 500 mhz, 1 gig RAM Mac OS X (10.4.7)
PowerMac G4: Dual 500 mhz, 1 gig RAM Mac OS X (10.4.7)
PowerMac G4: Dual 500 mhz, 1 gig RAM Mac OS X (10.4.7)

Strange issue with USB mouse and USB headset.

Good day everyone.
I was experiencing a rather strange issue with my mouse and headset(both USB).
I am using KDE and ALSA, if that matters.
They are working just fine, but sometimes, when I try to lower\raise volume, my mouse derps out. I can move it around, but I can't click on anything(sometimes though, I can click on stuff in window that was active before and sometimes only on KDE panel) until I re-plug my headset. Then, nothing can use my headset until I reboot.
Anybody ever had that problem?

I've had similar problems for some time now. Unfortunately, I don't know what the issue is either, but perhaps we can come up with some setup similarities and narrow it down. I have similar trouble with just alsa or with pulseaudio, so that's not it. It is unrelated to the DE, as it happened for me in both gnome 2 and xfce 4. It is not related to the machine either, as the same quirks occur in other machines with the same headset. I have had inconclusive results with downgrading to kernel26-lts, the ancient kernel. I thought at some point it messed up and I was sure the older kernel didnt help, but after trying recently-ish, I had no trouble for days -- until I found that I didn't have trouble on the main kernel either. ... then a few days later, it showed up again. Very irritating!
https://bbs.archlinux.org/viewtopic.php?id=122475
Does my old thread sound like your issue somewhat?
Essentially, at times, if the headset (wireless) is changed into a different power state (unplugged/plugged) or the mic state is toggled (mute/unmute), things that could be clicked on normally cant unless theyre in the window already focused -- mostly.
What headset are you using? 32 or 64 bit arch? Have you tried downgrading to kernel26-lts?

Help Please Software/Hardware Mouse And Keyboard problem.

I have a Corsair Vengeance and a Razr Black widow keyboard and the problem is that when i right click it wont let me select any options, it will flicker violently only when i move the mouse and im getting strange yellow highlight boxes whenever i drag
the left mouse button(ex Volume Sliders). The keyboard will only bring up shortcuts and the start button on my keyboard will open narrater settings. Ive noticed that it only happens when my computer falls asleep and when i turn it back on the problem will
start. Ive just installed advanced system care and ive done he maintanence. Can that be the problem? Ive already uninstalled it but the problem keeps happening.

Try reinstalling the driver http://www.razerzone.com/au-en/gaming-keyboards-keypads/razer-blackwidow/
Also run a "sfc /scannow" from the command prompt
Also in advanced power management setting disable the USB power saving options (think its called USB hybrid power saving)
Regards Jake Gardner If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties
and confers no rights! Always test ANY suggestion in a test environment before implementing! Sorry if my grammar is incorrect as I am probably on writing to you from my phone.

Z87-G45 Ethernet and USB problems. And BIOS flash problems

Hi. I kind of have a problem and hope you guys can help me.
I got this motherboard yesterday but I got a major problem with the Ethernet connection. It will simply not work, it’s totally dead. I have tried to enable everything that has to do with the Ethernet (Settings/advanced/intergrated peripherials) but it still will not work. There is no light at the back side that indicates that there is signal when I plug in the cable. I have tried the cable on my laptop so I know there is signal.
There is no problem installing windows, but I can’t install the drivers for the ethernet. I get an error message then that there is no hardware that can use this drivers.
Are there any places in the BIOS where I can enable it? How can I get this up and running?
And my USB driver is kinda messed up too. My 120MB UBS pen is found and can be used, but my 64Gb flash pen and my 500Gb USB HDD will now work with the USB. I only get the USB "ping" connection sound over and over and over and over again with the windows error, drivers not installed.
The other thing about the USB is that every time I restart the PC, I have to unplug the mice and put it into an other USB to activate it.
I have tried to flash the BIOS, but when I try (after pushing m-flash and connecting the USB and finding the file), the whole BIOS just freezes up and nothing happens. I try to wait a bit but nothing happens. I have to manually restart the machine by "force" (Turning the power to PSU off and on again. Ayone know if there is a problem with flashing the BIOS from USB? Or maybe that the USB system is messed up? Any other way I can flash the BIOS?
I have downloaded all the latest drivers and updated.
Best regards
Robert

Quote from: flobelix on 08-January-14, 00:44:08
Again do not try to use MFlash. Try the board outside case like suggested.
THis is making me frusterated now......
I have now had the motherboard on my wood table with a antistatic tablecloth and antistatic armband.
I only plugged in 1 ram, power, a monitor and mouse/keyboard(USB).
I manage to get the USB pen bootable so I could do the memtest and biost flash.
The USB ports are still unstable. I still have to move my mouse and keyboard from slot to slot when I restart the machine. It feels like if random USB conection is being turned off and on for every time I start the computer.
I connected a HDD to install Windows 7 64bit.
The computer will still not read USB storage with larger then my 120mb storage in both the BIOS and Windows (I suspect that 1GB is the limit for some rason). It only shows that USB device was not installed.
After I isntalled the USB 3.0 drivers that came with the mother board, the USB 3.0 system just stoped working. I tryed to update the drivers to the latest ones, but they still dont work. The USB 3.0 drivers do work in BIOS, but the drivers that came with the motherboard does not support windows 7 64bit. Or this motherboard.....
The ethernet conection is still FUBAR. When I try to install the drivers from the CD, the "LAN picture" is still grayed out. And when I try to force install the drivers, nothing will accept the network connectin. Trying to install the Killer Network Manager just ends up in "No supported hardware found in your system". It is like that the ethernet system is turned totally off.... But in the BIOS is marked as enable.
I have tryed to installe Realtek drivers, Intel drivers and the Atheos drivers, but non of them will install, all just say that there is no network that supports this drivers.
I am at my wits end right now. During the last 15 years I have build about 20 computers and this motherboard is taking 1st price for being the worse one ever.

Mouse and keyboard problem after updating to Mountain Lion

Hi!
This is the strangest problem I got on a Mac for 20 years...
I work on a Macpro 3,1. I upgraded my 10.7.5 os to 10.8.5 (needed it to use GTX 680 card).
The upgrade went fine and then... The mouse and the keyboard don't react.
After resetting the SMC they began to react but the mouse is deadly erratic and the keyboard repeats few time each key (impossible to write), for instance I hit n and got nnnnnn.
Resetting PRam does not help. Redoing the os update did not help.
This is really bad cause I can't use my Mac at all right now. I think I'll do a Fresh lion install and move my data back to it before I find something for that Mountain.
Its a real pain, does someone have an idea?
Thank you,
Milosz

Hi!
For those interested, I found the solution reading others forums.
Here it is:
I had to remove my optional old apple airport card (atheros a/b/g) and everything works fine now.
Hopefully I don't wifi on that Mac, otherwise I would need to buy another one. Which one? I don't know.
Too bad Mountain Lion isn't supporting anymore that apple card…
Have a nice day

[VIA Series] memory and usb problems

Hello...... I have the MSI PM8M-V motherboard, intel celeron 2.93 ghz processor and 256 meg kingston ram. I am upgrading about 50 pcs with this setup. On some, the system will not see any of the USB ports and on almost all of them, the system reports that I have 192 meg of ram instead of the 256. Is this a normal thing with the memory and has anyone else had the problem with the USB ports. Thanks

Quote from: Maesus on 20-December-05, 15:37:44
part of the RAM is taken by the video. That's why you only see 192MB instead of 256MB (64MB is taken by Video).
USB ports? make sure you enable them in the BIOS.
Make sure you have the Chipset Driver updated for the USB problem.
You might also check how you have the Front panel USB’s hooked up to the header on the Mobo. Make sure it is correct.

Nissan Altima BlueTooth and USB problems

Just picked up my 2010 Nissan Altima with Premium Sound Package (includes BlueTooth and USB). Palm P100EWW on Sprint.
Problem 1) Bluetooth pairs and connects, allows me to make or receive calls. However, it did not download my phone book, so I am not able to call people by saying their names. If I say List Phonebook, it says that there are no entries to list. Help!?
Problem 2) I want to play music via the USB. When I connect my Pre, the car screen says "Check Device" and will not do anything else. Help!?
Thanks in advance,
JimR

Class action lawsuit. I hate saying that as I think lawsuits are frivulous but ...
1) Bought my 2010 Altima in Oct. 2009
2) Non Nav System
3) Phonebook will not download
4) Phonebook works in Nav system
5) Engineer was brought in to research
6) engineer even had problems with other phones in non nav altima
7) i replicated issue and fix for the engineer in under 30 seconds
8) Fix = nav system works 100% no issues
9) Received phone call yesterday from Nissan telling me I'm FU&&ED!!!
10) requested they upgrade to nav system as that works
11) answer = I'm FU&&ED!!!

Keyboard, Trackpad, Mouse and USB ports - Not Responding

Hello,
Here is my problem. Today when I started my MBP, there was no keyboard, no mouse(USB), no trackpad, no USB ports. I restarted it several times, but nothing changes. If not everything looks fine My desktop is availble, also the backlight on the keyboard works fine, but I can do nothing, my MBP is unusable. Only the power button works fine. I tried to connect an external USB keybord without success, the same with usb drives. I'm running 10.5.6 on MBP, Core Duo 1.83 GHz, 2 GB RAM.
I found many discussions here about the same problem( http://discussions.apple.com/thread.jspa?threadID=1568210&tstart=0 ), I tried a restart without battery etc.... Nothing helps.
Please help, my warranty passed away
Message was edited by: gvassilev

As this is literally a brand new imac, I would hope that the ports aren't giving up as I am sure they are very expensive to replace.
If it is that new you should be under applecare so you could take it your nearest apple store and let them deal with it (or call apple first if you want).
Besides the keyboard do you have anything else connected to the usb ports that may be drawing off too much usb power? In which case you may need a powered usb hub.

Mighty Mouse and USB Overdrive

I have a new Mighty Mouse which worked fine until I downloaded USB overdrive. The middle click (where you click the ball) has now stopped working, as well as the two side buttons. I have trashed the overdrive application and repaired permissions. The ball scrolls fine and everything else is doing its normal job. Do you think there would be remnants of the usb overdrive application that may have hijacked the mouse?
Any tips?
Thanks,
Phil
iBook G4 Mac OS X (10.4.3)

I've fixed my own problem - the usb overdrive application puts an uninstall program un your Utilities folder! Hope this may help others who run into the same problem. The main thing for me is that I couldn't see a use for usb overdrive.
"Uninstalling the USB Overdrive X
To uninstall the USB Overdrive, use the Uninstall USB Overdrive application that's located in the Utilities folder inside your Applications folder. If you deleted it by mistake, you can reinstall the USB Overdrive (even if it's already installed) and then remove everything with the Uninstall application."
Phil

[Athlon64] Ram and USB problems!

Hi to all, this is my first post so be kind and patient.
My system:
(Hardware) K8T Neo2-F (VIA K8T800pro & VT8237), Athlon64 3200+ 939, 2x 256mb Kingston KVR400X64C3AK2 (Nanya) ram sticks, Maxtor DM 120mb SATA drive connected to SATA1, Liteon DVD connected to IDE2, Liteon 350 power supply.
(Software & Drivers) Win-XPpro SP2, VIA Hyperion 4in1v456v, VIA RAID OM74 v4.12, VIA USB2 V260-L.
I’ve got 2 problems:
Firstly, the board will not post unless I stick the 2 ram modules in DIMM 1 (Green) and DIMM 2 (Green) and ONLY reads 256mb while there is 512mb in there.
It also operates in single channel mode and not duel channel mode.
I checked the 2 ram stick with Cpu-z and it registered 512mb in single channel mode.
I tried putting 1x256mb in DIMM 2 (Green) and 1x256mb in DIMM 4 (Purple) as the manual says but NO GO!
I tried putting 1x256mb in DIMM 1 (Green) and 1x256mb in DIMM 3 (Purple) but also NO GO!
Secondly, when ever I try to plug in any USB device it slows the computer to a disabling pass especially when starting up window.
Can any one help please?
Many thanks.

Thanks Tiresmoke,
I updated the Bios to v3.3 and every thing is much better now. The board reads 512mb; one 256mb in DIMM1 (Green) and another in DIMM3 (Purple), and in duel channel too.
The only problem I have now, is that after XP loads there is about 20 secs of darkness and I have to move the mouse a little before I can enter in to XP's desktop, otherwise it restarts and goes into F8 (the safe mode screen)!!
That will have to do right now untill I find a solution for the moving mouse thing!
Thanks again.

Mouse and memory problems (975X Pl pe)

First Hello,
this is my first post here, hope you can help me
PC configuration in my signature
OK. Here goes
1.   And most annoying problem – mouse problem (A4tech NB-90 mouse, connected to usb)
Mouse stops working, randomly (maybe once every month). It’s happening when booting windows. Mouse doesn’t work, actually all the led’s are blinking but it’s not recognized by windows. Disconnecting and reconnecting doesn’t work (nothing happens). Rebooting windows doesn’t help (still not working).
Solution to my problems is to shutdown the computer and disconnect the power cable from my PC, then reconnect it again and start the PC all over again. NOW it’s working!! WT ?
I tested mouse (3 months) on the other pc and it works OK there, so he is not the problem.
o yea, I formated hdd, and installed fresh windows and still no luck.
2.   Memory problem on 800MHz – I think this is because of incompatibility with motherboard or too weak psu
By default (motherboard)memory works on 667MHz. (and with this setup everything is fine)
The problem starts when I put it on 800MHz in bios – than system becomes instable (random reboots)
a.   Memory tested with memtest at 667MHz (both and than separate modules, 4 hours each test) -> NO ERRORS
b.   Memory tested with memtest at 800MHz (both and than separate modules) -> Never saw so much errors in my life :(
I doubt I’ll solve this problem (except buying new memory modules), but you guys know more than me so I’ll let you decide.
and yeah, sorry for my bad English!
Thanks
Bas
edit: memory problem solved. Patriot @ 800MHz needs 2.0V

hehe here you go
Quote
F E A T U R E S
PSD21G8002
Patriot Signature DDR2 1GB CL5 PC2-6400 (800MHz) DIMM
• PC2-6400 (800MHz) Data Rate
• 240-Pin Dual in-line memory module
• Non-ECC Unbuffered
• 2 Rank Double-sided module
• 7.8US Refresh Interval
(8192 CYCLES/64MS)
• 1.8V Power Requirement
• Auto and self refresh capability
• PCB height: 1181 (mil)
• Serial Presence-Detect (SPD)
• 100% Tested
• Lifetime Warranty
• RoHS Compliant
Quote from: Maesus on 26-March-07, 20:51:54
well... check the spec on website.

10.5.6 update and USB problem.

Since upgrading to 10.5.6 whenever I attach my ipod or sony reader it now takes 4 or 5 minutes before the computer recognises that a USB device has been plugged in.
Anybody else had a similar problem or knows what is causing it.
Many thanks,
Allen.

I had a kernel panic with a USB-connected scanner. After a lot of experimenting, I changed the USB port the scanner was plugged in to and everything worked fine.
Try plugging your USB accessories into different USB ports. It couldn't hurt

Asha 501 and USB problems with MAC OSX 10.9

I checked everywhere and I could not find any threads about this problem, so I'm asking here, in the official support forum.
The problem is:
Connecting the Nokia Asha 501 to the mac (via USB cable), and selecting "external memory", the memory card is mounted and I can browse the contents, BUT the photos show corrupted. I even lost some, because I tried to open them in the Preview app on the mac. (take a look at the attached photo of this post, a screenshot clearly showing corruption)
Importing the photos via Bluethoot works, and the photo on the phone are showing fine. The memory card is okay, I checked with an external card reader.
Also:
- This problem does not show with Windows 7/8
- This problem does show with other Mac OS X
The phone is updated, I flashed it with the Nokia Software Updater and I formatted the memory card.
Any help?
Attachments:
Schermata 2013-11-11 alle 17.13.07.png ‏285 KB

I have the same problem. Would be great to have a solution. I have some photos on the phone I'd like to use and keep, but at the moment they are stuck on the phone.
John

Ps2 mouse and usb problems

Similar Messages

Maybe you are looking for