Ps3 Airport Utility 6.1 help?

So i'm trying to do two things:
1. Give me ps3 a static IP address and portforward a game.
2. Sharing my 3tb harddrive with the airport extreme via usb port on the ps3.
I've tried doing some research on the first issue and even attempted using portfowarding.com but I only find information on using the older airport utility. Thought it would be straight forward but once I try a internet test on the PS3 it recieves an ip address but no internet connection.
If you need a screen shot of the ps3 settings I'll gladly post one. Just not sure what information i need to take off of it. :|
I found some guides here as well but again using the older airport utility. So any help would really be appericated.
For my second problem, I just recently switched my Linksys router to the Airport Extreme. Before I was able to plug in a harddrive in the back of the router and of course share my moves and files with the ps3. I reformated my harddrive after getting the Extreme from NTFS to Fat32. When i plug the harddrive in I can access it on all my computers no problem (rather pc or mac)...but I can get it to appear on the ps3. I know after you plug it into the ps3 it automaticly drops a file on there for you. So i did that but still no luck after plugging it back into airport. Any help or tips?

Please check to make sure that you are downloading and installing AirPort Utility 5.6 for Mac OS X Lion ......and not AirPort Utility 5.6.1 for Mac.
If you check the data sheet, you will see that AirPort Utility 5.6.1 cannot be installed on a Mac running Lion.
You should also be running Lion 10.7.4 if you are up to date on that operating system on your Mac.

Similar Messages

ITunes can't connect to my new Airport Express even when light is green and see it with Airport utility. Please help!

Hi,
I'm using iTunes with my iMac and like listen the my music collection in my Hi-Fi which is 20 m far from the Mac. Because of the distance in my flat and other obstacles I'm using a power line. I installed the Airport Express through the Utility and no problems: Airport light is green and configured. iTunes air see it but it can't connect to it.
I made several resets, plugged and unplugged the power and no change, but Airport light is always green, see it in iTunes and the Utility.
This is driving my crazy!
Any ideas ?
Thanks

Hi Jim,
Thanks for reacting to my question.
Yes, I did reboot the router, unplugged and replugged the Airport Express with ro result .... iTunes cannot connect to the Airport Express. I'm using power line to carry Ethernet because between my Mac and AE there are about 20 meters, but problems started since I updated AE version to version 3 ...
It is also non sense because the Utility sees it and then suddenly disappears ! but light remians green ...
I think there might be something wrong with the new firmware versions ...
Carlos

How do I connect an external hard drive to the airport extreme using the Window's based airport utility?

I'm having trouble connecting an external hard drive to my home network via a Widows based operating system and the Airport utility. Please help.

No, you can't. Only a printer. You can with the Extreme, though.

HAAALP!!! AIRPORT EXTREME NOT SHOWING UP ON AIRPORT UTILITY

I have two airport extremes one to make network and one to expand it. the one i have to make the network is working fine and is a FINE peice of machinery. but the second one i have to extend my network will not show up on airport utility. and no i am not a stupid and didnt plug in the wires right everything is in perfectly and i use to be able to configure it then one day it just stops so i reset and configure it with airport utility. but after it restarts the airport and updates it. it will not show up on airport utility. PLZ help i have tried everything reset it a millions time and some times it will show up then i will change the settings again!! and it will not show up again!!!!! plzz plzz HELP

they are already in the same room and i am doing it on the same computer and it feels like it has gone into a land it can not come back from. also i just realized that it stays amber constantly like its in its startup process. and after a while the light just goes OFF. so idk and i have hard reset it and isnt it supposed to flash lights (cause it doesnt) when i hard reset it. well idk its weird its like it take forever to startup or something cause all of the sudden it will show up on airport utility but after i configure it again it restarts and can not be found again. ;{

HT4260 Is there an airport utility 6.0 tutorial?

Just neede to see if there is a 6.0 tutorial for this setup, thanks!

There is a 50+ page tutorial in the Help section.
Open AirPort Utility
Click the Help Menu
Click AirPort Utility Help

Time Capsule Connectivity Problem with Airport Utility and Mavericks

I have a Time Capsule from 2011 which worked perfectly with my IMac and Airport Utility 5.6.1 but since the upgrade to Mavericks, I cannot get it to work with Airport Utility. Any help much appreciated. Thanks.

When you say.....
I cannot get it to work with AirPort Utility....
What does not work? Can you open up AirPort Utility and take us through the steps? What happens after each step?

Airport Express Install help needed as Airport utility for PC seems to sort of work?

Hope someone can help.
Just bought the Airport Extreme 802.11n Wi-Fi
It is connected to my cable modem, and i have my ps3 hard wired to it.
It is on and sending a signal because this computer is using the internet connect on it right now.
Problem is it is still unsecured as the Airport Utility can find it but then when I click continue to set-it up it gives me the following message.
An error occured while trying to access the apple wireless device. Make sure your network connection is valid and try again.
Error 10057.
Any help would be great. I'm on a PC running Windows 7.

Thanks for the reply.
All we have is the cable internet modem....it provides our phone and internet signals....tons of lights on it the front that are solid green or flashing green when in use.
I have connected a cable from the modem to the airport express (WAN spot). Plugged in the device (power) and then downloaded Airport Utility for windows from apples website (no disk came in the box).
I have have two wired connections running to the extreme as well, one is to my PS3 downstairs and the other I use when I'm at my desk with my office laptop. These shouldn't be affecting anything and I can get internet on my PS3 wired connecton so I know the router is functioning.
I installed Airport Utility and have rebooted my PC running windows 7, I click and opne the Utility. It finds the base station but when I click on the options to continue or manual I get the error message noted in my first post. I have alos noted that the router goes green light to yellow to flashing yellow. It does nothing but flash amber right now.
Hope this helps for solutions?

Airport Utility no longer sees Airport Extreme and I think I need to redo my entire network - can someone help?

I just purchased this new Airport Extreme after my older Airport went down. This Airport Extreme at times is super fast, but it gives me more headaches than the older version because it seems to drop its signal too often. Last week I was able to see my Airport Extreme in my Airport Utility and was able to configure it - now Airport Utility can't find any Airport Extreme, although, it shows that I have an internet connection. I was hoping that someone who knew how to do a nice easy network set-up could help me start from scratch so this is set up right. As of now, our home uses the wi-fi for 2 Wii consoles, a wi-fi printer, cell phones, and an internet connection for my MacBook Pro - not too many connections, but still my connection drops all the time, all day long for no particular reason whatsoever. I want to be able to have one good strong connection for my computer and the rest of the connections could be secondary. I would like if the secondary items used a password, but not the same password as the main connection. It seems to me like I'm not asking a lot, but I have no idea how to set this up because now I can't even find my Airport Extreme to configure it.
So, if anybody has some advice on the best way to set this up and how I would be able to start that process without being able to even detect my Airport Extreme, I would sure appreciate any effort to help me out on this.

Is your profile up to date?? Lion is not so commonly used now.. but was a lot more reliable than Yosemite.
What modem do you have? Actual make and model is a big help.
What is the main router? Is the modem supplied by ISP? Is it a gateway device?
If you use the airport as bridge or router, I also need to know how it is connected into the system. Mostly people have it via ethernet to the main modem or router.. please confirm.
One very important point.. the Wii need WEP security at least for older models.. You must NOT change security on the Extreme.. It must be set to WPA2 Personal (or nothing if you live at least 2km from other humans).
So, if anybody has some advice on the best way to set this up and how I would be able to start that process without being able to even detect my Airport Extreme
reset to factory and you will get control back.
The best way to test is full factory reset.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer or iOS device with latest utility.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen6 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz for each band respectively.. with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem if you are using AE as main router but is a problem for when it is used in bridge.. you have to use dhcp reservation from main router or use static IP on the AE setup.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. If the AE is bridged and still having dropouts use a LAN port to connect to the main router instead of WAN.. we are finding the AE is problematic on the WAN port.

Help! Time Capsule set up help: Airport Utility not cooperating

Hi Everyone,
I'm desperate for help with this issue. I have a Time Capsule, Base Station and Airport Express (all previous generation)at different points throughout the house. At first the issue was with the base station that refused to find my network so I called the helpdesk and got it fixed and all was well until the next day when the Time Capsule and Airport Express began to malfunction.
While everything connected to the network fine, our iphones couldn't find the network while downstairs. I tried to fix the issue but then I realized that while the base station wireless mode said 'extend network' the time capsule and airport express wireless mode said 'join network.'
I believed I overdid it on hitting the time capsule's reset button for a soft reset one too many times and now the slow flicker amber light will not steady itself or move to green and the computer is unable to successfully attach itself to our network. I've tried to restore the factory default settings but this only results in an error message 'there was an error trying to detect apple wireless devices, make sure network connection is valid and try again.'
All computers and phones have been updated with current firmwares etc. At this point, I'm stressed because I rely heavily on the internet for school and research and I don't know what else to do. Should I do a hard reset or just contact apple support?
Thanks,
Michelle

Trinifoto wrote:
I have a Time Capsule, Base Station and Airport Express
Welcome to Apple's discussion groups.
Please identify the "Base Station". Do you mean an AirPort Extreme Base Station? Are all those 802.11n-capable devices?
the base station wireless mode said 'extend network' the time capsule and airport express wireless mode said 'join network.'
That suggests to me that none of those devices is your "primary" router. If that's the case, what is the brand and model of the device that's connected to your Internet feed or Internet modem?
I believed I overdid it on hitting the time capsule's reset button for a soft reset one too many times and now the slow flicker amber light will not steady itself or move to green and the computer is unable to successfully attach itself to our network.
What does AirPort Utility say about the status of the Time Capsule? (If you have trouble connecting to the Time Capsule with AirPort Utility, try plugging an Ethernet cable from a LAN port of the Time Capsule to the Ethernet port of your MacBook Pro.)
I've tried to restore the factory default settings but this only results in an error message 'there was an error trying to detect apple wireless devices, make sure network connection is valid and try again.'
Did you do that reset by holding in the reset button until the status light flashed rapidly several times? Normally after a reset, you have to select the network for that device (usually named in the form "Apple Network xxxxxx") for AirPort Utility to "see" it. That's why an Ethernet cable can be useful.

Since I upgraded to Lion 10.7.2, my external HD is no longer visible in AirPort utility (in the AirPort disks tab). I also installed the AirPort utility for iOS5, it reported a disk problem, but running Disk Utility on the Mac showed no issues. Help!

To expand on the question, I have performed the following steps:
1 - Unplugged external drive (1TB WD MyBook) from the Time Capsule
2 - Reconnected it. At this point, AirPort utility for iOS5 reported a problem with the disk (Time Capsule light was blinking Orange)
3 - Unplugged external drive, connected it to MacBook Pro, ran Disk Utility. It found no problems (disk visible straight away on the MacBook Pro).
4 - Reconnected to Time Capsule - still doesn't show up under the "Disks" option under Air Port utility. Or rather, the hardware is visible (i.e the physical disk) but not the volume.
5 - I tried another external hard drive, and the volume also doesn't appear in the Disk section under the AirPort utility.
The WD disk is formatted as Mac OS Extended (Journaled).
This is a big problem for me, as the drive houses my iTunes library.
Anyone else had a similar problem? It all worked flawlessly until last week.

I love computers.
Have managed to fix this already. Been working the issue for a few days now, and a few minutes after writing the above post I decided to reset the Time Capsule to factory default settings.
After entering all my details again (used same network names, passwords etc) the Time Capsule was rebooted. When it came back on line - guess what? Yep, the MyBook WD drive is now visibile. I can connect via the network from my other machines to the drive, and iTunes is back.
So - thought I would post my resolution in case it helps others.

HT5022 I'm trying to add a "new client" to my wireless network using Airport Utility, but I can't find that option in the new version. I've downloaded all available updates of the OS and the utility.. Help!

I'm trying to add my HP wireless printer as a "new client" to my wireless network using Airport Utility, but I can't find that option in the new version. I've downloaded all available updates of the OS and the utility.. Help!

Why would you need to ADD a new Client. Unless the APE sytem is completely different then any other Wireless router the printer should get an IP address from the router. That is IF the printer is setup to get an IP from the LAN DHCP server.
Now you may want to make that IP it does get a Staticly assign IP address so it never changes, which will screw up printing if it does change. But i don't know if you can do that with APE routers.

AirPort Express won't show up in AirPort Utility... Help?

Both of my AirPort Express base stations have stopped showing up in AirPort Utility. AirPort Utility *does* see the AirPort Extreme base station, but that's it. I have tried both a soft and hard reset on our AirPort Express to no avail... I can see one of the AirPort Express base stations on my iPhone, but can't seem to access it through the AirPort Utility. Help?
I have also tried File > Configure Other & entered the IP address that showed up on my iPhone, as well as a default password 'public' but received a connection error & could go no further. Any ideas you may have as to what I can do to fix this would be awesome.
Thanks in advance,
Erika

do a hard reset on the airport express itself. hold pin button down for about 10 seconds until it flashes really fast yellow. worked for me

Need help with port mapping on Airport Utility 6.1

Ive been trying to port map on my TC with Airport Utility 6.1 and failing miserably. Port still closed. Can anyone advise where Im going wrong? Am trying to set up my home camera to be viewed outside.
I managed to key in the ports etc under Network and Port Settings. But nothing works. I'm tearing my hair out.
Any suggestions to try would be helpful.
Thanks

Use the 5.6 utility.. it is much easier and I think works better.. although you cannot load 5.6 directly into 10.8 the version for Lion actually works fine.
Download 5.6.
http://support.apple.com/kb/DL1482
Download unpkg
http://www.macupdate.com/app/mac/16357/unpkg
Open the AU 5.6 dmg and drag the pkg over the open unpkg.. it will create the directory on the desktop. You can either run it from there or drag the utility to your utilties directory.
Take screen shots of each step. Post them here.
That way we can tell you where it has gone wrong.
What port exactly does the camera need open?
How are you connecting remotely?
ie do you have a fixed public IP?? If not how are you getting IP?
Is the TC the only router in the network.. it is irrelevant unless the TC is the one and only router.

HT1218 My airport utility no longer works, but I have just changed my router. Is there something I need to do ? The orange light shows up on my airport, rather than the green one it should have. Please help !!!

My airport utility no longer works, but I have just changed my router. Is there something I need to do ? The orange light shows up on my airport, rather than the green one it should have. Please help !!!

**** little info about your equipment.
If you just replaced the router with an Airport Extreme or Express:
disconnect the modem from power, disconnect the new router from power, connect the modem to power and wait till it os fully started up, then connect the new router to power. After a while the amber light will turn to flashing, then after a while it will turn to green. Then with AirportUtility (in Aplications/Utilities) it should be configured with the password.

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

Ps3 Airport Utility 6.1 help?

Similar Messages

Maybe you are looking for