PS3 and wrt310nv2

Hi,
Hope someone can help me.
I have the wrt310nv2 and a PS3 both the the most up to date firmware.
I've set up the router settings for the ps3 that i found on this site and i'm having trouble with streaming video from my media server. I can stream music perfectly but anykind of movie/video file it stutters so bad it's not worth watching it.
Here's the settings I've changed per what I found on this site:
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
On the set-up tab change the MTU Size to 1365 and click Save Settings...Click on "Administration" tab and disable the option UPnP and click Save Settings...Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 80 and End box type in 80, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
2) On the second line in Application box type in DEF, in the start box type in 443 and End box type in 443, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
3) On the third line in Application box type in GHI, in the start box type in 5223 and End box type in 5223, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
4) On the fourth line in Application box type in JKL, in the start box type in 3478 and End box type in 3479, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
5) On the fifth line in Application box type in MNO, in the start box type in 3658 and End box type in 3658, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
6) On the sixth line in Application box type in PQR, in the start box type in 10070 and End box type in 10080, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings
7) Now assign the given ip address on your PlayStation ip address :- 192.168.1.20, subnet mask :- 255.255.255.0, default gateway :- 192.168.1.1...
8) Also assign the dns addresses on the PlayStation Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
9) Turn off your modem, router, and PlayStation...Wait for a minute...
10) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the PlayStation and test it...
I changed the router to be the actual router as 192.168.0.1 instead of the ISP 192.168.1.1 noted in the above instructions
I've also changed the following in the router setting to "Wireless G only" anf filter multicast is off.

My ISP would not be relevant. I assume you mean what type of internet connection do I have?
I do have DSL. How would I put my router into bridge mode?
Thx

Similar Messages

I can't use PS3 and Laptop at same time ?

OK I'm hoping although strange this might be a simple as changing a setting in my hub or laptop, here goes:-
Like many housholds nowadays I have many things connected to my Hub, Desktop, Ipod, Phone, Sky, games machines,etc
Well the problem I have, is when I stream Netflix or Amazon prime on my PS3 it buffers a lot or wont go HD for quite some time, no problem I switched to a wired set up, which helped with speed a lot, happily watching movies of an evening,
then one evening, it kept saying it's taking a long time to sign in, and wouldn't, I re check my network settings, and it shows unable to obtain an ip address,
so I set up the wirless again, and the same problem,
anyway after a few nights of this, I get a bit fed up, then out of the blue, it works again, both wireless and when I switch back to wired,
so I settle down to watch a film, fire up laptop, and after a few mins it flashes on my PS3 I have been disconnected, I peice things to gether and realise, when I have laptop on I cant connect PS3, even if laptop is wirless and PS3 wired ?.
I assume they are both using the same ip ?, I deleted the laptop from my Hub in the hope it would assign another, fired up PS3, and then re booted laptop, but straight away it kicks out PS3.
I have mooched arround in hub advanced settings, but I dont know what I'm doing, so not going to adjust anything, so if it is just a case of modifying my laptop or hub settings, if someone could instruct me I would be greatful, and if its not thought to be that HHEEEEEEEEEEEEEEEEEEEEEELLPP Please
Thanks in advance
Chris
P.S. I have searched the forums, there seems to be a lot of PS3 connection problems, but nothing that matches my particular problems

No I'm afraid that didn't work either

Can i stream the content on my airport extreme to my PC, PS3 and iPad ?

I want to purchase either the Airport Extreme (and plug in a 1TB external hard drive) or the Time Capsule. I want to know if it is possible to share the media in either of the drives (movies of all formats avi flv wmv mp4 and songs etc) wirelessly on my PC, PS3 and iPad.
I basically just need an airport express because i need to extend my wireless range by plugging in an ethernet cable. But if i will be able to share the content in a hard drive wirelessly without much mess, then i'd go for the capsule or the extreme. I've googled around and found that its incredibly messy to stream non-mp4 videos on iPad, u need to copy the entire movie onto ipad to watch it and blah blah.
Can anyone tell answer me like u talk to a non-tech freak ? Thanks

See this older post from another forum member Zevoneer covering the different methods available for copying content from your iPod back to your PC and into iTunes. Once you have successfully done that, you can safely choose the Erase and Sync option.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

What do I need to hook up XBox w/Kinect, PS3 and Wii Gaming Consoles

Hello all,
I have a Flat screen TV purchased about 3 years back. It has 1 HDMI port and it has I believe two sets of the red/white/yellow ports (a set on the left and a set on the right). I want to connect the following:
1 – Xbox with Kinect
1 – PS3
1 – Wii
I know I need 1 HDMI cable
We have Comcast wireless internet and the modem/router is in a neighboring bedroom.
What else do I need to purchase in order to hook up all units?
Thanks for your time and assistance.
Solved!
Go to Solution.

You can buy a HDMI switcher with a remote. It will require 3 HDMI cables but you can switch from the Xbox or PS3 with the remote.
The red/white/yellow ports doesn't put out HD resolution so you can use the Wii for that.
So you can get a HDMI switcher or plug HDMI to either Xbox or PS3 and the two remaining will be connected by the red/white/yellow ports.
I believe the new Xbox, most PS3, and the Wii have built-in WiFi adapter already.

Formatting external hdd for PS3 and final cut.

I recently purchased a 1TB external hdd. I would like to partition this drive so I have 320gb to back up my PS3 and the rest to use to store my Final Cut express projects.
Does anyone know if this is possible? I know the PS3 only reads FAT32 and I am wondering if it will be able to pick up my external hard drive if part of it is not formatted FAT32.

Oskar,
This is the Final Cut Express Forum, not a PS3 forum. There's no reason to expect anyone in this forum to be able to answer questions about PlayStations. Tom was quite reasonable suggesting that you search elsewhere.

Can i plug my ipod 4gen via usb into my ps3 and play zombies off the app

Hi is there an app for cod zombies online so i can plug my ipod 4 gen into my ps3 and play it

Just what do you mean by play? You can likely charge you iPod if you connect the iPod to a USB port on the PS2. The USB cable in on the dock cable does not support out except syncing

Skype for Sony Playstation 3 ( PS3 ) and for Sony Playstation 4 ( PS4 )

There is a huge amount of Sony Playstation users who would like to have Skype available for their consoles. The client is already available for PSP and PS Vita. There are ton of thread with this request, but none of them has received a clear answer and that's why I open a new thread. We know that there are a lot of alternatives like smart TV, Blu-ray and other compatible devices, but the request is clear : could you please let us know if there is any plan to implement a client for Sony Playstation (PS3 and/or PS4) or not? If not is it possible to know why?Thank you,Dashie

Tsunamidevil wrote:
So thereAre you 12? Tsunamidevil wrote:
watch your tone buddy. I didn't see anyone give you a "tone" until now. People answered your question. On top of of that, you aren't really anyone to be demanding any sort of tone from anyone else. I'll explain why:
Tsunamidevil wrote:
Yea that true MSFT own Skype but Sony own the Blu-ray which now available on XBox One. So fair is fair that MSFT should return a favour to give Sony 'Skype' as well.......Ya should had done your research before making that comment.And you should have a basic understanding of business before making yours. Return a favour? Really? Blu-ray is a standard. It's in Sony's best interest to allow it to be available on more platforms, so it moves closer to superceding the DVD, AND they get to make revenue from licensing the standard as a result. In the case of Xbox One, Sony make between $2 and $3 per unit according to a Wedbush Securities estimate.
Skype is a service. And for most users, a free one at that. The revenue from it comes from people paying for the premium services such as inbound numbers, which are very unlikely to be users basing their presence on video game consoles. Given the climate of the next gen releases, it is in Micorsoft best interests to give their console offering a certain exclusive. No matter how small. In short. Comparing Blu-ray to Skype is rediculous. Just write it off as a shame that business is business.

Skype for Sony Playstation 3 ( PS3 ) and for Sony ...

There is a huge amount of Sony Playstation users who would like to have Skype available for their consoles. The client is already available for PSP and PS Vita. There are ton of thread with this request, but none of them has received a clear answer and that's why I open a new thread. We know that there are a lot of alternatives like smart TV, Blu-ray and other compatible devices, but the request is clear : could you please let us know if there is any plan to implement a client for Sony Playstation (PS3 and/or PS4) or not? If not is it possible to know why?
Thank you,
Dashie

Tsunamidevil wrote:
So there
Are you 12?
Tsunamidevil wrote:
watch your tone buddy.
I didn't see anyone give you a "tone" until now. People answered your question. On top of of that, you aren't really anyone to be demanding any sort of tone from anyone else. I'll explain why:
Tsunamidevil wrote:
Yea that true MSFT own Skype but Sony own the Blu-ray which now available on XBox One. So fair is fair that MSFT should return a favour to give Sony 'Skype' as well.......Ya should had done your research before making that comment.
And you should have a basic understanding of business before making yours. Return a favour? Really?
Blu-ray is a standard. It's in Sony's best interest to allow it to be available on more platforms, so it moves closer to superceding the DVD, AND they get to make revenue from licensing the standard as a result. In the case of Xbox One, Sony make between $2 and $3 per unit according to a Wedbush Securities estimate.
Skype is a service. And for most users, a free one at that. The revenue from it comes from people paying for the premium services such as inbound numbers, which are very unlikely to be users basing their presence on video game consoles. Given the climate of the next gen releases, it is in Micorsoft best interests to give their console offering a certain exclusive. No matter how small.
In short. Comparing Blu-ray to Skype is rediculous. Just write it off as a shame that business is business.

Best 32" lcd for ps3 and tv

Hi all
I have been searching forever for the best 32" lcd to be used for ps3 and hdtv. I also will be using the blue-ray player alot. I was very disappointed in the 32" sony Braviakdl32l5000 i looked at today . Any help would be so appreciated!!!
Thanks

What didn't you like about it? There is a 1080p model with 120hz if you want to take a look at it. At that size, there's not much in the way of image quality but the one you looked at is ideal simply because it doesn't have 120hz processing which screws with your gaming image and introduces lag.

Ps3 and Xbox 360 already asked many times but no solution works

Hi,
first of all I'd like to share with all of you my real disappoint for having bought this Airport Extreme Base Station. I really hope that someone at Apple will read my post and come to my house because I would have just a few words to tell them.
After 4 years of proficuous cooperation my Netgear WI-Fi router left me and I immediately thought to replace it with an Apple product just to be sure that it would have been easy to install and on top of performances.
I chose the Airport Extreme which is much more expensive than quite all the other same product but I didn't care about it because I would have brang home an excellent product.....or...at least I thought it !
Once in my room the soap opera began. I'm not a genius but I consider myself a medium skilled user and, in any case, even it is not my real job, I configured many bigger LANs than my personal ones and I never had such kidn of problem.
I read many posts where people were asking for information because they couldn't connect their Airport Extreme to their PS3 or Xbox 360 but I never had such kind of problem. It really worked immediately and both consoles worked in few moments.
My REAL problem is that both of them are terribly slow and I can't do anything online. I can't see streming videos, I can't play online and I can't neither play videos that are on a LAN DLNA server !!!!! It takes about 35 seconds to play a video and some times it has to stop for empty buffering reason. This is really unacceptable.
I tried so many configurations and nothing changed and I also took a look at some guides but they had been written with old firmwares so they are quite unuseful for me.
After having asked a friend of mine to give me his router (a Netgear ones) for some days I finally made myself sure that the problem is the Airport Extreme.
It also has a very poor signal because my iPhone has difficulties to keep the connection in areas where my old router worked fully.
If only I could turn back time I'd never buy it again but now, having spent to useless my money, could you please let me know a working configuration for the latest firmware 7.4.2 ? I tried to use the previous firmware but I have the same problems.
There is only a wall separating the Airport Extreme from the PS3 and Xbox and both of them get a 100% of signal but I really don't know what to do.
Thanks for all the help you could provide me.
Bye.
Christian

Sorry but I have no way to measure the actual throughput for any of my devices (I have 2 Xboxes which have the same problem and even my iPhone suffer of a bad connection).
In any case I really can't understand why the connection is so bad. I can even get in touch with my ISP to ask them if there is some problem with the connection (maybe a coincidence and the Airport Extreme has nothing to do with it ?????) but the facts remain: even my DLNA server and PS3 connection is slow and I can't clearly see the movies I have in my intenal LAN and also the iPhone show a poor connection to the Airport Extreme and it is because of the Extreme for sure.
I really don't know what to do.

Help - WRT400n how do I get better hard wired speeds on PS3 and Xbox 360

I wanted to get better speeds while playing on-line on the PS3. I bought the WRT400n router (I had the WRT54G) and it seems to be working ok. I just hardwired the ps3 and the speeds are a little slower. Wireless I was getting 12.0 Mbps down and 1.0 Mbps up, now wired I am now gettiner 10.0Mbps down and 2.0 Mbps up. I numbers are lower wired, how come? I have a new Cat 5 cable and I just had a direct cable dedicated to the router put in. I thought I was going to see much better speeds. Can anyone help me out? I am very confused about the the speeds. People were telling me when I hardwired I would get get speeds up to 50 to 100. What am I doing wrong?
Thanks..............

On your Router setup page, below change the MTU size to 1365 and below click on Save Settings, then click on the Wireless tab and below change the Wireless Channel to 11 and click on Save Settings, then click on the sub tab under wireless "Advance Wireless Settings" and below Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Once you are with this settings, then click on the 'Security" tab and below Uncheck "Block Anonymous Internet Request" and click on Save Settings...
Now unplug the power from the Router and Modem,wait for 30sec and then first plug the power to the Modem and once all the lights are solid then plug the power to the Linksys Router. Now you can check the speed on your XBOX.

Will installing PS4 and ACR 5 wreck my current PS3 and ACR 4?

If I installed PS4 (and of course ACR5) into a separate directory in my hard drive, will that stop my current copy of PS3 and ACR4 from working? I don't mind if new versions takes over the file extension associations, but will it totally corrupt my current versions making them unusable?

If I can humbly add an extra comment to the DEFINITIVE EXPERT answers;
Installing the upgrade version of CS4 without removing CS3 also leaves CS3 functional. Now I just have to figure out if I can safely remove CS3 without messing up anything.
However this is the paid for (upgrade) version. With an install of a trial version a couple of numbers back, removal of the trial damaged Bridge and after a lot of troubleshooting, I had to completely reinstall the whole earlier suite (I have CS2 suite as well) to get back. Since that was an upgrade as well it ended up being a painful and long winded recovery.
The best solution is just to buy whatever version of CS4 you qualify for and forget about trials. There are a LOT of really useful improvements as well as a big leap with layers and masks and non-modal edits. Brilliant!

Best format for ps3 and apple tv

What is the best format for viewing movies on a hdtv (1080p) via ps3 and apple tv?
Not sure what my best option would be in the sharing/export options, also should I make it 16:9 even though all the footage was 4:3?
Message was edited by: rwltrz4

Thanks.
I've posted up on their forum too (the folks over there are not as responsive as you guys, helpful, but not in the same volume )
I kinda hear what you're saying, but the encoding time (fps and time taken) is pretty slow on my PPC G5 iMac at the moment, and if the Turbo.264 is doing most of the processing then from what you say it'll stay the same on a new Intel Mac. I really hope not, or it'll be me throwing in the whole notion of recording TV on my Mac and heading off down the shop for a PlayTV for the PS3.
Either that or hope for a decent upgrade to the Mini at Macworld, sling the Apple TV on to ebay (film rental selection here in the UK is still pretty weak) and replace with a Mini, plug the tuner in that and watch native EyeTV recordings without the need for lengthy encoding. I reckon Front Row, and an iPhone Remote will do almost as good a job for my music as the Apple TV does.
One day we will look back and laugh at the notion of an hour long TV show being 'encoded' for playback at all, let alone waiting more than 2 minutes for the process to happen!

PS3 and linksys WRT54G. found a fix!!! please look

http://vibrantreality.wordpress.com/2007/10/27/ps3-and-linksys-wrt54g-the-solution/ not sure if it has been posted but it works!!! enjoy

Let me review my setup. I have a WRT54g Version2 Linksys Router. The Router firmware has been updated. I have two computers wired to the router and they work fine. I have a Linksys Media Center and a Laptop that work in a wireless environment and they work fine. The ISP is Comcast.
The PS3 is wired through a Linksys switch to the same Router. The switch is a Linksys Etherfast 10/100 8-Port Workgroup Switch EZXS88W ver 3.1. On the PS3 I have tried all the combinations of DNS that I can identify. The setting for MTU is at 1492 which matches the status shown on the Router screen. I have tried UpNp in both the Disabled and Enabled modes. I am currently using the DNS's that appear on the Status page of the Router.
On the Router I have set the IP address for the PS3 up as a static address in the DMZ as 192.168.1.2 UpNp is currently disabled. I have assigned ports to the static IP in the Gaming screen and enabled them..I have entered the DNS's numbers from the Status page on the Setup page for the Router as static IP DNS's.
If I connect the Laptop to the same wire that the PS3 is currently connected to, the laptop comes up fine on the Internet. The PS3 finds the IP address but continually gives me the DNS failed (80710102) error message. This is also true if I run the PS3 in a wireless environment.
Your assistance is greaty appreciated.

PS3 and WRH54G

How do I setup my PS3 and the WRH54G for optimal use. is port forwarding, Mac address etc.
THanks
nick

Hi,
Click here to configure ur PS3 !
Network Security Administrator (EC Council)
linksysfirmwares.googlepages.com/

PS3 and wrt310nv2

Similar Messages

Maybe you are looking for