PS3 associate with UC520W Wifi
Recently I come this weird error when PS3 connect to UC520W Wifi.
PS3 version 2.53
UC520W IOS 12.4(22)T
Does anyone know what causing this and how can I solve it ?
000193: Dec 22 23:14:23.151: %DOT11-7-AUTH_FAILED: Station 00XX.XXXX.XXXX Authentication failed
000194: Dec 22 23:14:24.835: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station 00XX.XXXX.XXXX Associated SSID[MYSSID] AUTH_TYPE[OPEN] KEY_MGMT[WPAv2 PSK]
000195: Dec 22 23:14:34.659: %IP_VFR-3-SYSTEM_ERROR: BVI1: IP VFR System failure - Unable to create fragment chain
000196: Dec 22 23:14:34.659: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853CDAD0, count=0, -Traceback= 0x80F1D668 0x80205388 0x81D03BE8 0x81D04A40 0x81D05608 0x81D06EA8 0x813638F4 0x80B5F20C 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588
000197: Dec 22 23:14:34.659: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853D7A48, count=0, -Traceback= 0x80F1D668 0x80205388 0x8026A110 0x80B5F1D4 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588 0x80026588 0x801AC2E4 0x801ADC20 0x801ADECC
000198: Dec 22 23:14:34.759: %IP_VFR-3-SYSTEM_ERROR: BVI1: IP VFR System failure - Unable to create fragment chain
000199: Dec 22 23:14:34.759: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853DB33C, count=0, -Traceback= 0x80F1D668 0x80205388 0x81D03BE8 0x81D04A40 0x81D05608 0x81D06EA8 0x813638F4 0x80B5F20C 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588
000200: Dec 22 23:14:34.759: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853D1790, count=0, -Traceback= 0x80F1D668 0x80205388 0x8026A110 0x80B5F1D4 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588 0x80026588 0x801AC2E4 0x801ADE28 0x801ADDB8
000201: Dec 22 23:14:34.963: %IP_VFR-3-SYSTEM_ERROR: BVI1: IP VFR System failure - Unable to create fragment chain
000202: Dec 22 23:14:34.963: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853C4E54, count=0, -Traceback= 0x80F1D668 0x80205388 0x81D03BE8 0x81D04A40 0x81D05608 0x81D06EA8 0x813638F4 0x80B5F20C 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588
000203: Dec 22 23:14:34.963: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853C7BE4, count=0, -Traceback= 0x80F1D668 0x80205388 0x8026A110 0x80B5F1D4 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588 0x80026588 0x801AC2E4 0x8230B09C
000204: Dec 22 23:14:35.367: %IP_VFR-3-SYSTEM_ERROR: BVI1: IP VFR System failure - Unable to create fragment chain
000205: Dec 22 23:14:35.367: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853C744C, count=0, -Traceback= 0x80F1D668 0x80205388 0x81D03BE8 0x81D04A40 0x81D05608 0x81D06EA8 0x813638F4 0x80B5F20C 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588
000206: Dec 22 23:14:35.367: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853C59B8, count=0, -Traceback= 0x80F1D668 0x80205388 0x8026A110 0x80B5F1D4 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588 0x80026588 0x801AC2E4 0x801AFB44
000222: Dec 22 23:14:53.591: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 00XX.XXXX.XXXX Reason: Sending station has left the BSS SSID[MYSSID]
Use nothing for encryption with mac filter and see if you can associate. Then move up to static wep. The PS probably doesn't respond quick enough for your controller. You might increase EAP timeouts from the cli.
Similar Messages
-
I'm currently sharing my apple ID with my wife. We'd like to create a new ID but are unable to associate her existing email address to a new apple ID. Is there a way she can maintain her existing email address while creating a new apple ID?
Leave her ID alone and create a new one for yourself with your email address.
-
Q10 os upgrade 10.2.1.537 Wifi dos not associate with network
Hi all, have a BB Q10 and since monday have updated the OS and since then i am not able to connect to my networks at work and home. I have delated both saved networks and re done them, and it keeps telling me not able to associate with network. Can you help me? Mo
I'd recommend this Knowledge Based: Article ID: KB14477 Unable to connect to a Wi-Fi network on the BlackBerry smartphone. And also the documentation of troubleshooting wizard: http://docs.blackberry.com/en/smartphone_users/deliverables/48934/wifi.jsp
If the problem persist, it's time to call your ISP. They must know specific setting based on the router model that you are using.
Good luck.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution -
For those having issues with networking (wifi) after 10.6.7 installation
Hi everyone,
I don't want to get your hopes up, but I MAY have found at least a temporary solution to this very annoying problem. It involves deleting a preference file and restarting, so it's worth a shot. I can't promise that it's a permanent fix since I've only just gotten my connection back up and running, but it is a start. This also works for those who are getting the "self-assigned IP" error.
Simply go to your Library/Preferences/ folder and look for the com.apple.alf.plist and delete it by holding shift+apple+backspace. You may want to back up this file prior to deleting this, as this file is associate with your firewall. Any changes you made to your firewall will need to be reapplied, so keep that in mind. After deleting the file, simply restart and make sure your wifi settings are right. This worked for me after one restart, and I've now been running solid for about an hour. Again, I don't know if this will be a long term fix since the connection seems to fail after a few days of use, but at least it's a step in the right direction.
Please let me know if this has been of any help.Veggibacon,
I've been having the same connection dropout issue since 10.6.7 but with ethernet rather than wifi. Saw your post a couple of weeks ago and figured I could safely ignore it since my firewall was off and I wasn't connecting with wifi… silly me. Came back to this post (out of desperation, really) and even with the firewall off, deleting the com.apple.alf.plist file and restarting seems to have fixed my problem, for the time being. Considering the success, or total lack thereof, that I've had with every other "fix" that I've tried I'm curios how it is working out for you after a month. Has it really fixed the problem or has the problem resurfaced? -
Failed 2 associate with network
hi i recently have purchased a bb 9360 and im tryin to connect to my home wifi but the error msg comes up sayin failed to associate with network. ive also tried it at my other family members house on there wifi and gettin the same msg, i use 2 hav a bb 8520 and had no problems conectin to the wifi. plz plz plz could someone with any info how 2 solve this problem help me out with sujestions as i live in a area with poor signal so i use the wifi for bbm, internet etc...
many thanks juniorHey Junior,
Welcome to the BlackBerry® Support Community Forums.
This can be caused when media access control (MAC) address filtering is enabled on the Wi-Fi® network,add the MAC address of the BlackBerry® smartphone to the accepted MAC address list for the Wi-Fi network.
How to find the MAC address of a Wi-Fi enabled BlackBerry smartphone
http://btsc.webapps.blackberry.com/btsc/KB13233
I hope this helps.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
On 3G we cannot send Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine. We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this.Contact whomever supports the email account and get the correct Outgoing email server settings from them.
-
My Time Capsule does not work with existing WiFi
Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it. -
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
How can I share my itunes items with my wife?
Anyone know how I can share items in my itunes library with my wife? We both have Iphones but I don't know how to be able to let her download from
my library.Fingers crossed, the following document may be of some help with that:
iTunes: Setting up Home Sharing on your computer -
How can I share my schedule information with my wife on her accounts and devices?
My wife and I have separate accounts in our MacMini and MacBook. We each have an iPhone. She uses GMail. I use Mac Mail. How can I share my schedule information with my wife on her accounts and devices?
It is not advisable to follow the above suggested method. The following will do what you want without complications.
1. On your Mac, go to http://help.apple.com/icloud/#mm6b1a9479 and follow the instructions to share a calendar privately. If you have more than one calendar you want to share you will have to do each individually. You can choose whether she is able to edit it or whether it should be read-only.
2. If your wife does not have an iCloud account she will need to obtain one. When you share a calendar and nominate her to access it she will receive and email. All she has to do is to open the email and click 'Join Calendar'. This will add the calendar to her Calendar app on all devices and on icloud.com without affecting any other data. Again, this will have to be done individually if more than one calendar is involved. -
How can I share my iPhoto library with my wife's iPad?
Is it possible to share my iPhoto library (Yosemite) with my wife's iPad? She doesn't have a separate mac, but she does have her own apple ID.
No
You can share selected photos using PhotoStream - you can not share the library
Next year the Photos App for the Mac should be able to share the library on iCloud using iCloud photo library
LN -
how can i share my itunes purchaes with my wife who is working in Dubai while I am in UK she is so isolated and this would mean a lot to us
Just email it.
In iTunes, drag the file to the desktop.
On the desktop, select the file right click Share > email.
I just want to send my sister one song from my iTunes because its a recording of her daughter when she was 2. She no longer has the file and I only have it saved in my iTunes from a long ago. The only known file is the one I have saved on iTunes.
You do make regular backups of your computer, correct?
Use Time Machine? -
Hi, I share an iTunes account with my wife. Sometimes she gets my iMessages and I don't and vice versa. Also if people face time me it goes to her phone. How can I stop this from happening?
You can share the same Apple ID in
Settings > iTunes & App Store > Apple ID: here
But for all other Apple services like:
FaceTime, iMessage, iCloud, etc, one of you should use a different Apple ID. -
How do I set up different network locations with different wifi?
I am having an issue setting up different network locations with different wifi profiles on each. I want to do this to enable fast switching of wireless networks. In my house I have two wireless networks, my own personal one and one that is created by using a wifi modem supplied by my company. If I use the company wifi network then I can get into all my work applications without having to enable VPN access separately. It is also faster. However, they also block many applications including sending email from my personal email account, dropbox, etc. So throughout the day I need to switch wireless networks back and forth.
I was looking for a faster way to switch and thought I would try network locations. Was able to set up a new network location without issue. However it seems that whatever wireless preferences, changes, or wifi network order I put into my "Work" location it carries over to my other location which is the standard "Automatic".
What I would like it to have my "Work" location only to be able to connect to my work wifi and my other network (Automatic) to just connect to my home wifi only. That way I can enable faster wifi switching and can even use my launcher program (Alfred) to provide shortcuts.
Anyway to do this?
Thanks in advance for any help or advice.Just thought I would bump this up in the conversation. Doing a further search I came across this discussion which is similar: Connecting to a wireless network via applescript?
However, I tried to build the Automator application as discussed and cannot get it to work. Very much a novice at Applescript and Shell Script but have created customized Automator services before. All I get now is "Shell Script command encountered an error". No more detail. I copied and pasted the script as shown in the email thread. Is there any other line or command I need to place in front of it?
Thanks again for any help -
How do I set up my new Macbook Pro to associate with my Apple ID so I can download purchased music?
How do I set up my new Macbook Pro to associate with my Apple ID so I can download purchased music?
Under 'Manage Devices' it only lists my iPhone and iMac. I've bought stuff on my new Macbook Pro using my Apple ID, but I can't find music I previously purchased using the iMac.Oh, wait, I've found it. Silly me!
Maybe you are looking for
-
PSE, multiple Windows users for same files - how do use the same profile?
I have collected all my digital media into a NAS unit, available on my LAN. All users have their own users on to the LAN, but I would like to share one "profile" for all when it comes to the PSE view of my pictures, so that we can all use the same ta
-
How can I download free applications in AppStore without having a credit card?
Please, reply to these message. I really love to utilize my gadget but I don't have a credit card I am not able to download free applications in AppStore, and it makes me disappointed, please help me out what process can I do to avail free apps in yo
-
I have had an iphone 3, 4, 4S, and now a 5. Every picture I have ever taken is saved as "photo". How do I change the auto naming format to a more sequential name?
-
How to open a ai file with some layers named in Japanese with a AI CS5(English Ver)
I can't open some ai files that may contains some layers named in Japanese. I am using AI CS5 (Eng Ver) and how can I open them? Thx!
-
I'd like my text to conform to whatever width the user chooses to browse at. iWeb seems to only provide for dynamic padding to a fixed block of text. Is there a way to configure it so the layout isn't fixed?