(PS3)Changing NAT TYPE to Open for router WRT150N

I need help chaning the NAT Type to open because I can't play with some of my friends on Playstation. Tell me how please
loans personal

A known issue with Linksys routers is the NAT Type 3 or anything related to dropping of Internet connectivity during play time. Network Address Translation (NAT) is the ability of a router or firewall to translate a public IP address to a private IP address and vice versa. It adds security to the network by keeping the private IP addresses hidden from the outside world.
Gaming consoles such as Xbox 360®, PlayStation®3, and Wii™ often encounter NAT related issues resulting to poor gaming experience. This problem is resolved by checking the settings on your router which contribute to NAT issues.
This is due to the built-in firewall of the router and to get past this, you will need to open ports on the router. You may do this by either doing Port Forwarding or Port Triggering. Once the ports are successfully opened, the NAT Type issue will change to Open or Moderate thus, making the gaming console work.
Here is the link which resolve the issue: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=2902de6218ed4dc1a4c595595ca1f60a_Resolving_NAT_Typ...

Similar Messages

PS3 - Changing NAT Type

Hi all,
I have a PS3 and it's not allowing me to connect to certain people or even use the communication feature on it. So currently I have Frontier internet with a Gigaset modem, a WRT160Nv3 Linksys router. Currently my NAT type is 3 and I hope to change it to 1 if possible, 2 would be okay as well.
Thanks for your time.

Well here is my Internet IP Address: 192.168.254.1
I'm not sure what to do with that.
Also after looking at the site you gave me, I'm still confused at what to do. This is an e-mail that I got from Sony.
Thank you for contacting Sony Computer Entertainment America (SCEA) about changing your NAT type. Below are the TCP and UDP (firewall) port numbers you will need to connect online with PlayStation® products.
IMPORTANT:
Make sure to enable these TCP/UDP ports in BOTH directions and are entered into the TCP and UDP port fields in your router / modem. Contact your Internet Service Provider or router manufacturer for proper instructions on how to input port information for your network.
SCEA Game Servers
All games published by SCEA (first-party) may use the following ports for communication with SCEA (first-party) game servers:
TCP Ports: 80, 443, 5223, and 10070 - 10080
UDP Ports: 3478, 3479, 3658, and 10070
PlayStation®Network
TCP Ports: 80, 443, 5223
UDP Ports: 3478, 3479, 3658
Please let me know if you have any further questions or concerns.
Regards,
Jason F.
And I don't know what to do with those ports or where to enter them.

Trying to change NAT type to open from strict

I'm trying to change my NAT type on my PS3 from strict to open. My router is a WRT120N and I'm using cable internet. Please help me, and sort of dumb it down so I can understand what you're saying. Thanks a ton!!
fake watches

i think strict NAT type is a double-NAT setup. it would really depend on your modem. what's the brand and model of your modem? does it have routing capabilities? what IP address does it give off?

HT204023 Xbox keeps telling me to change it's Nat type to open for them to run properly together, how do I do that?

When using iphone 5 as hotspot for Xbox 360, how do I change Nat

When I manually download and install I get the message I already have a later version.
Doublechecking before proceeding. Do you also get that message if you try to install the most recent version of Bonjour?
(There's a few different possibilities afoot relating to damaged installation configuration information for Bonjour on the PC here ... fingers crossed, the answer to my question will help narrow down the possibilities.)

NAT type on pc (for mw2)

So for ages now ive been trying to set my NAT type to open for MW2 on my PC, however, all hte guides I find either dont work, or only work for ps3/xbox. Some info about my setup: upnp is ON. DMZ is OF. Firewal is ON. So if anyone knows an easy way to permanantly set the NAT type to open, it would be much appretciated.

I could never get anything less than NAT type 2 when using the home hubs. I switched to a Netgear and now have no issues at all.
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

Need help opening NAT type to OPEN on a model WRT54GS router for xbox 360

I have tried from other people's advice and when i test Xbox Live i always get a Moderate NAT type. I am becoming frustrated with how it is not working and I am hoping someone can help me. Please leave advice/suggestions and thank you for your time.

Open the setup page of the router using 192.168.1.1 by putting the password as admin with username as blank & click the Administration tab & on the same page you will see UPNP.You need to select it as disable in order to help opening NAT type to OPEN.

How to change nat type 3 to nat type 2 for Plastation 4?

how to change nat type 3 to nat type 2 for adaptation 4? i am havng a complicated time with this im'm just trying to play online and been at it fotr 3 days i have tried about everuyhing n portforwarding.com i have a Cisco Linksys E1000

Hi ceasar14. I actually found some steps (from a source) that worked for me. I'm not sure if it will work for you. Here are the steps:
1. Get the MAC address of your PS3. To find your MAC address simply go to
Settings > System Settings > System Information
2. Assign a static IP address on your PS3.
3. Access your router's user interface to open a few ports.
4. Under Applications and Gaming > Port Range Forwarding, open the following ports:
TCP: 80, 443, 5223
UDP: 3478, 3479, 3658
5. Once this is done, powercycle your PS3 and the router.
6. Run a connection test and check if it is now on NAT2.
Good luck.

Trying to change my NAT type from Open to Strict or Moderate.

My NAT type is open but I can't get any games. I told my friend and he said try and change my NAT type from Open to Strict, and that it might help in joining games. I can join CoD4 games, but not MW2 or MW3 games. Can anyone help me? I am playing on XBOX360 and I use wireless internet.

A known issue with Linksys routers is the NAT Type 3 or anything related to dropping of Internet connectivity during play time. Network Address Translation (NAT) is the ability of a router or firewall to translate a public IP address to a private IP address and vice versa. It adds security to the network by keeping the private IP addresses hidden from the outside world.
Here is the link, which will you in resolving the concern: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=2902de6218ed4dc1a4c595595ca1f60a_Resolving_NAT_Typ...

Time capsule, PS3 in NAT type 3

Hi Everyone,
I understand this has been asked many times on many forums, so my apologies here.
I have a BT Home Hub 2.0 (wireless disabled) as my modem, hooked up to my time capsule which is acting as the router (WIFI). I have my PS3 connected wirelessly to the network configured with my Time Capsule.
Playing GT5, i cant seem to get my PS3 off NAT type 3.
Can anybody please advise me on how to solve this??
Many thanks!

I have a BT Home Hub 2.0 (wireless disabled)
Even through you disabled the wireless function, the Home Hub is very likely still providing NAT services for the entire network.
my time capsule which is acting as the router (WIFI
If you have the Time Capsule configured as a router...as you say....then it is also providing NAT services.
You may have an error known as Double NAT on your network. To check and see if that might be the case....
Open AirPort Utility - Click Manual Setup
Click directly on the word Status (2nd line on the summary page)
Are there any messages there about NAT?

Changing NAT type from moderate to open for PS3 on...

Hello,
Pretty simple really.
I want to be able to change my NAT type from Moderate to Open whilst playing FIFA 12 on the PS3.
I am using a BT Home Hub 2. I have read various posts about Port Forwarding and DMZ but what is the method that will open the NAT type indefinitely. I have read that it can only be altered temporarily due to the Home Hub updating it's settings periodically and re-enabling the firewall.
Any help or pointers in the right direction would be greatly appreciated.
Matt

Hi Matt,
Welcome to the forum and thanks for posting. Take a look here for some information on port forwarding. I've also found this whcih you might find useful. Let me know if it helps.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

PS3 Nat Type 3 - Airport Extreme Router

Greetings internet people;
I am an Airport Extreme user (connected to a Motorola 2210-02 DSL modem via ethernet) - with a PS3 who is finding it incredibly frustrating to get my network to work with my PS3 in NAT 1/2 -(Modern Warfare 2 is difficult with variable lag/no party invites).
This is my current network layout:
http://grab.by/ABS
Modem information screen:
http://grab.by/ACb
Our ISP is Bellsouth (AT&T) and the modem is currently set to PPoE. I think I set up port forwarding to a static IP for the PS3, but still, nothing I've done/read online has worked, or I haven't done it right.
(I tried plugging the PS3 directly to the modem and it still remains in NAT Type 3.)
I need the network to stay in tact - so that wireless works etc. I could set up the switch between the modem, but I'm still not sure if that'd do it. ----
Any help would be greatly appreciated, I want to figure this out so I can actually play my PS3 online :<
Peter

I have the same Motorola model 2210, but the screen shots in the original post were different, so you may have to search a bit for things.
The 2210 provides NAT service, and the only way to hook it up to the AEBS to Connect Using "Ethernet" will result in the double NAT because the AEBS is also furnishing NAT services.
You will need to use the web interface for your modem and you will probably need to plug it into your computer to configure it. The setup page(s) on my model will display when you enter 192.168.1.254 into your browser. Check your documentation to see if you will use the name address or a different address.
When you log into the modem, look for an Advanced setting, PPP Location, or similar. You need to change the PPP setting from the current "On the Modem" to "On the computer or router". If there is a setting for "Bridge Mode", you can use this as well. Update to save changes on your modem and it will restart.
Important...you may not be able to get back into the modem configuration again unless you reset the modem by holding in the reset button for approx 10 seconds. Then you will be able to reconfigure the modem if you need to do so.
Reconnect the modem to the AEBS and open AirPort Utility - Manual Setup. If AirPort Utility does not "see" the AEBS, temporarily connect an ethernet cable from your computer to one of the LAN <-> ports on the AEBS and try again.
After you click Manual Setup, click the Internet icon at the top of the setup pane and look for the Connect Using setting. You need to change this to PPPoE. Then enter your user name (probably your email address with the ISP) and password. Important....leave the Service Name area completely blank. Do not enter anything here.
Click Update and the AEBS should restart with a green light in about 20 seconds. You have now eliminated the double NAT between the modem and AEBS. Sorry, I can't help with details on the game console, so there may be some additional configuration needed for that device.
Please post back on your progress.

How to Change the NAT Type of an Apple Router

My dad just bought an apple Router and some new modem. now since i know the router is apple company i want someone to tell me how i change its NAT Type from Strict to either Moderate or Open because its preventing me from connecting to my friends on xbox live. Im also using a Macbook Pro for a computer so its apple software an their shouldnt be any reason this cant be resolved effectively i just need a guide to tell me how to go about fixing this problem.

Unfortunately, the AirPorts are not listed as Xbox Live-compatible routers ... so there is no guarantee doing this will get Open NAT status for Xbox Live!
The following web blog does a great job explaining the NAT issues with Xbox Live! Basically what it comes down to is that although you can get an Internet connection for the Xbox with the AirPorts, you may not get the necessary NAT setting (Moderate or Open) for the Xbox Live! on-line game that you want to play. As such, you basically have two options: 1) Create a DMZ (Apple calls this a Default Host) for the XBox or 2) Configure the AirPort for Port mapping to open the required ports to allow Xbox Live! access ... or 3) Use a compatible router.
Option 1 - Create a DMZ
AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT
Enable default host at: <Enter the IP Address for the XBox>
Option 2 - Configure Port Mapping
The following ports must be available for Xbox Live to operate correctly:
UDP 88
UDP 3074
TCP 3074
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the Xbox 360.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
Click the "+" (Add) button to enter DHCP Reservations.
Description: <enter the desired description of the host device>
Reserve address by: MAC Address
Click Continue.
MAC Address: <Enter the MAC hardware address of the Xbox or the MAC address of the wireless depending on how you connect the XBox to the network.>
IPv4 Address: <enter the desired Private IP address>
Click Done.
2. Setup Port Mapping on the AEBSn.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT > Configure Port Mappings
Click the "+" (Add) button
Service: <choose the appropriate service from the Service pop-up menu>
Public UDP Port(s): 88, 3074
Public TCP Port(s): 3074
Private IP Address: <enter the DHCP Reserved IP address for the Xbox you created earlier>
Private UDP Port(s): 88, 3074
Private TCP Port(s): 3074
Click "Continue"

How to change the NAT type to Open on a Imac using bridged connections

Hey everyone I have a problem. I play xbox live with my friends and i just moved and dont have a wireless adapter anymore. so i have bridged connections with my imac and xbox via ethernet. It works perfectly, but the only problem is that when i connect it say that my NAT type is strict. To play with all my friends i need a open NAT type. Does anyone know how to make the NAT type on the Imac open. And i do have a D-link router model DIR-625. When i called D-link they said to port forward, i did and it still didnt work, they said it must be the fire wall on the mac, microsoft said the same thing, that it might be the fire wall. I checked the fire wall and it said "All Incoming connections are allowed".
I would really much appreciate it if someone helped me. Thank you!

Yes, most likely. Microsoft has provided a list of XBox LIVE!-compatible routers. Since the OS X Internet Sharing feature is limited, there is no way to configure port mapping or placing the XBox in a DMZ with it. Typically, you either use a compatible router or configure port mapping/DMZ for non-compatible routers.

XBOX LIVE. HOW TO CHANGE NAT TYPE FROM MODERATE TO OPEN, HELP:(

I am completely stumped. I am not a technical person but I'll explain the best I can. I have an airport express.. that's connected to my westell wirespeed modem which gives wireless internet to all my computers at my house.
i also play xbox. i use the internet sharing feature on one of our mac mini's to connect to the xbox. however, the nat type is moderate. i have no idea how to change this to open. please help cuz its frustrating because i pay 60 dollars a year and i do not get the most of my subscription. for example, i can't join party's or join some games..
and also, i read online that if i put my ip address to the address bar, you could change your nat type. but the problem is, every ip address i put into the address bar, nothing comes up. in my airport utility, it says my ip address is like 10.0.1.1.
i am so confused. please help!!!!!!!!!

I am completely stumped. I am not a technical person but I'll explain the best I can. I have an airport express.. that's connected to my westell wirespeed modem which gives wireless internet to all my computers at my house.
i also play xbox. i use the internet sharing feature on one of our mac mini's to connect to the xbox. however, the nat type is moderate. i have no idea how to change this to open. please help cuz its frustrating because i pay 60 dollars a year and i do not get the most of my subscription. for example, i can't join party's or join some games..
and also, i read online that if i put my ip address to the address bar, you could change your nat type. but the problem is, every ip address i put into the address bar, nothing comes up. in my airport utility, it says my ip address is like 10.0.1.1.
i am so confused. please help!!!!!!!!!

How do you change the NAT Type to Open?

Hey everyone, I bought the apple AirPort Extreme Base Station (The tall one) and I've bought the xbox one. So I tried joining a party and it didn't work so I checked my nat type and it showed strict how do I make it open ?

You must manually port forward all the ports required because the AEBS does not conform to upnp standard used by MS.
See Tesserax documents for port opening.
https://discussions.apple.com/docs/DOC-3415
Just look up what ports the game requires.
This is the min required for xbox live to work.
Xbox Live requires the following ports to be open:
Port 88 (UDP)
Port 3074 (UDP and TCP)
Port 53 (UDP and TCP)
Port 80 (TCP)
Port 500 (UDP)
UDP Port 3544 (UDP)
UDP Port 4500 (UDP)
http://support.xbox.com/en-AU/xbox-one/networking/network-ports-used-xbox-live
About time apple realise since they don't make consoles anyway it is time to actually help people who do.

(PS3)Changing NAT TYPE to Open for router WRT150N

Similar Messages

Maybe you are looking for