PS3 Game Update Stops (WRT54G)

Hey, I have been playing ps3 online for over a year now and had a different router in my old house.  We just got charter set up in our new house today and have a linksys (WRT54G) router.  I'm trying to update a new game's version but it gets to 10%-20% and just stops due to the wireless cutting out.  Sometimes it randomly signs me out to, but I was playing COD earlier and it worked fine.  Any ideas why I can play games fine, but the update stalls over and over?  Thanks!!
Solved!
Go to Solution.

To resolve this you should Upgrade your router's firmware...
Download the Firmware from here
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Also make sure that your computer is set to obtain IP automatically, disable any firewalls, security softwares on the computer before trying to access the setup page...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
Also on the router's Security tab uncheck Block Anonymous Internet Requests and click on Save Settings...
Under the Administration tab disable UPnP, under the set up tab change the MTU size to 1452...

Similar Messages

  • PS3 Game data updates CRAWLING SPEED

    Hi guys,  got a weird issue with my ps3. So I have wired connection and whenever I just try to download game updates they just slow down to crawling speed. they first start off fine but then random just go super slow. I also own a PS4 and this is working fine. i have also tried downloading from the PSN store and this works fine.  I have done the following:  Rebuilt the databaseRestored file systemFormated the ps3Re-installed the firmwarefactory resetted my ADSL modem. Any advice? It only happens when I get PS3 game updates. Downloading anything else is fine

    I've factory reset my modem . I can't get any more restarted then that. The isp is iiNet (Australia) but it only happens to my ps3. All my other devices down files fine. Happens all times of the day for every game update

  • Game Center stopped working

    Game Center stopped updating my progress on the leaderboard of Slot Journey. Has anyone else experienced this and have a solution?

    Hello christinacoco77,
    After reviewing your post, it sounds like a games progress is not being updated in Game Center. I would recommend that you read this article, it may be able to help the issue.
    Using Game Center on your Mac or iOS device - Apple Support
    If you have an issue with a Game Center game, follow these steps:
    Make sure that you have the latest version of the game. To check for updates, go to App Store > Updates.
    Test your connection using a different game. If you can't connect with a specific friend or player in multiple games, they might need to check their Wi-Fi connection and router settings.
    On iOS, try opening the game from the Home screen, rather than from within Game Center.
    If you can't solve the issue, follow the steps in the next section to report the problem to the developer.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • (PS3) GT6 update 1.10 installation fails repeatedly

    Hi, I have a serious problem with installing update 1.10. The system downloaded and installed the 2GB installation package but when the game started and the installation script wanted to apply the update the installation failed during the process. The only option was to press OK button but the update procedure started over and over again with the same result. I did a complete restore of my PS3 to its defaults and formatted the disk (full format). Even after that I couldn't update GT6. The game can run without any updates installed. Once I check for updates, the system downloads all 9 packages and installs them. Then I start the game and the update proceduce fails the same way like before the PS3 restoration. How could I solve it? 

    For those who are still struggling with updating problems...pls try to follow steps mentioned below...at least them worked for me !I found these instructions from elsewhere on this site...--------------------------------Hi mate, sorry to hear of your troubles.   Settle in because I'm about to write a novel.   Seems like you covered most of the big things to try.Unusual that a new formatted HDD is still giving you trouble.Sounds like the issue is probably related to the downloads then, possible packet loss, causing issues with the install. Are you using a wired or wireless connection?Obviously wired is better and you should always use that if possible.Wireless is more susceptible to packet loss during downloads than a wired connection. Do you have a copy of your save file?Are you installing copy that before you try the updates?In other words, any chance the save file is corrupted and causing you issues? Digital download or disc copy?Obviously, also make sure the disc is clean and not scratched, and the laser lens is clean. Only a few things come to mind that you may not have tried.One is downloading the patches in stages.Another is downloading via the new v4.60 XMB option.(Never done it, not sure how it works, but doubtful it will make much difference)The last is an in-game function ... switching off the 'Install Game Data' option.(I'm unsure exactly how this function works) At this stage, considering the game isn't functioning at all, you may as well delete all traces from the HDD.New HDD ... so refomat?Option available from the XMB.XMB ... Settings > System Settings > Restore PS3 System.I believe you will need to update PS3 to v4.60 again.Check HDD looks okay regarding System Software Version and Free Space.XMB ... Settings > System Settings > System Information. Otherwise remove all GT6 files from the console manually.For disc copy   XMB ... Game > Game Data Utility > delete GT6 file.                            XMB ... Game > Save Data Utility > delete both save file (GT6 and GT6 Backup)If digital copy   XMB ... Game > Game Data Utility > delete GT6 file.                             XMB ... Game > delete GT6 icon.                             XMB ... Game > Save Data Utility > delete both save file (GT6 and GT6 Backup)Again, just check HDD looks okay regarding System Software Version and Free Space.  So .... once happy everything is removed, load GT6 onto console.If disc version start the game offline.If digital version download the game only.Start the game offline (or cancel option to Update Software) and confirm it's playing correctly.Play far enough to establish a save file.Quit game, and still 'offline' restart the game and again confirm all is good, and at this point you could consider swithing off the 'Install Game Data' option.Start button > Options > Game Data > Install Game Data.Check link for details.http://www.gran-turismo.com/us/gt6/manual/#!/save_load/autosaveYou may need to manually save to hold this setting change.So you now have a functioning game with a valid save file and the 'Install Game Data' function switched off.  Okay, time to try updates.You could consider doing it in stages.Each patch will download and then install.Once installed, the next patch will begin downloading etc etc.It is possible to cancel out of the download once a file has installed. (circle button) So if it says 'Downloading File 1 of 9' allow for the download and install to finish.When it changes and says 'Downloading File 2 of 9' cancel the process.You should now have updated to the next version ... eg v1.01.You should now be able to play the game (by cancelling the option to Update Software) and check everything is okay. So try updating and installing the first patch file.Check the game is playing correctly.If you have the 15th Anniversary content, you could now consider introducing that the the game data.Access from XMB.XMB ... PSN > Account Management > Transaction Management > Download List.If you have a USB copy of your save file, you could also consider reintroducing that.If you do either of these things, check the game is still playing correctly before proceeding with the other updates. While testing game, you could also consider switching on the 'Install Game Data' option from the in-game menu.You may need to manually save, and then quit and restart game for the function to activate.It's unknown to me exactly how this function works.Whether anything will install immediately after you switch it on, whether it's not until you restart, or whether it will install anything at all, I'm not sure.After giving that a go, you could consider switching it back off again, and manually saving.(As I say, I'm unsure how this function works. Whether this is a worthwhile exercise is perhaps questionable, but apart from wasting a bit of time I see nothing wrong with trying it at each step.)  Then try next patch.Download and install "File 2 of 9'.Cancel download once finished.Check game is playing correctly and manually save.Switch on 'Install Game Data'.Initiate data install, then switch off function and manually save. *Special note for v1.02*There is a known issue for updating forwards from v1.02.Check the link for details.http://www.gran-turismo.com/au/news/00_3266694.html  Continue with 'File 3 of 9'.Repeat process as before. Next patch ... etc etc etc.Checking game and installing data (if available) after each patch. Going roughly from memory ...v1.01 and v1.02 were around 1GB and 1.2GB.v1.03 - 1.06 were all quite small.v1.07, v1.08, and v1.09 were again around 1GB or larger.So you might choose to skip through a few patches part way through if you wish.  As I mentioned earlier, v4.60 introduced a new Game Update function to the XMB.By pressing 'Triangle' while on the GT6 (or any) game icon brings up a menu.On this menu is a new 'Check for Update' option.This allows you to check for updates without launching the game.How it works if it finds an available update I'm not sure. (haven't had a chance to test)So I don't know whether there's any advantage trying to patch GT6 via this option.But it's there if you want to try it out as another alternative.  Obviously, with all that said, there is no guarantee it will work.With a new HDD, a regular full update in one go shouldn't be an issue, so there's a problem somewhere.Maybe the step by step approach will help.Again, and most importantly, wired connection if possible. If no luck it's just a case of try and try again.As you mentioned, using a friends internet, particularly with a different ISP and/or better connection, is a good option.  Please let us know how you get on.Also, please let me know if there's a problem/error/mistake with how I've described any of the procedures.And if you could add anything to that step by step approach, or info. on the XMB 'Check for Updates' function it would be greatly appreciated. Best of luck with it.

  • HT1926 Installation of latest  itunes update stopped, gave error message re couldn't find MSVCR80.dll. Suggested reinstall. Tried but that generated same message. Now get that message when I try to open itunes. I have Windows XP. Help!

    Installation of latest itunes update stopped, gave error message "couldn't find MSVCR80.dll"  Suggested reinstall. Tried but got same message. Now get same error message when I try to open itunes. Help!

    Hey jeight26,
    When you uninstalled and reinstalled iTunes, did you use this article?
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Sincerely,
    Delgadoh

  • HT202157 Apple TV update stopped in step 1 of 2

    Apple TV 3 updating stopped in the 80% of step 1 of 2

    Well this happened to me to. Against the warnings I unplugged Apple TV and plugged it back in. It came back up fine. Ran software update and it downloaded and installed without an issue this time.

  • Why there is no update for WRT54G Ver 7?

    Why there is no update for WRT54G Ver 7? I can only see Ver 1, 1.1, 2, 3, 4, 5, 6, 8

    hi  Gavlin:
    You would downknow the firmware of wrt54g v7 at the www.linksys.com.cn ,this is the chinese web .

  • I have downloaded a game called temple run, it is stuck downloading under the game it sayz 'Waiting' i have 3 other apps like that and my Smurfs game updating it is stuck too like that ! I have alot of apps so i dont want to delete date!!!! Plz help!!!!

    I have 4 apps that i just downloaded and they are 'Waiting' i need some one
    To plz come up with a solution i dont want to erase my data cause i have over
    100 games paid and free PLZ HELP i also have my smurfs game updating
    And i cant get on it now cause
    It wont update plz help!!!!!!!

    These links might be of help:
    Troubleshooting applications purchased from the App Store
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    iPod touch: Hardware troubleshooting
    I would use these links in order { if the info on first link doesn't work, move to second link }

  • When I download the digital copy of the Hunger Games, it stops at 4.0GB and first returns an error code -1309 and then the code -50. Please help me complete the download.

    When I download the digital copy of the Hunger Games, it stops at 4.0GB and first returns an error code -1309 and then the code -50. Please help me complete the download. I have tried removing the .tmp folder and downloading it again, but each time it stops the download in the same place.

    I discovered the solution. The external drive I was saving it to was formatted as FAT32. In that format, the largest files can only be 4GB, which explains why it kept stopping at 4GB. I backed up all the files then reformatted it as Mac OS Extended (Journaled), this is possible since I am on an iMac.

  • Networking with other computers after xp updates stops

    will networking with other computers  be possible , safely after xp updates stops?

    None of the functionality of Windows XP will change.  Everything you can do today you will be able to do next month.  The only thing that is different is the fact that there will no longer be updates issued for XP.  If you
    are doing ONLY internal networking with no internet access, you have nothing to worry about.  If you have internet access, then you will need to be especially certain that the anti-virus is up to date, and you have a good firewall running.
    Please do not read this sentence. Please ignore the previous sentence.

  • Automatic song update stops randomly

    Hi,
    I'm running iTunes 6.0.4 (3) on OS X 10.4.6 with a 40 GB 3G Clickwheel iPod (firmware 3.1.1). It's worked fine for more than a year, but recently I restored the software and now automatic updates of music stop at random places (with no error messages, even after sitting for 24 hours or more!). Manual update (drag and drop, up to 8000 songs at once) works fine. I listen to a number of podcasts so would like automatic update to manage these for me.
    I saw several similar problems posted, including one I found on Google that no longer appears here. Does anyone have a solution for this?
    Thank you.
    ---Karl
    Mac Mini   Mac OS X (10.4.6)  

    Automatic update stops when I use USB 2.0 or FireWire -- no difference.

  • Can I play PS3 games on my MacBook Pro?

    Can I play PS3 games on my MacBook Pro? I want to run PS3 games on a MBP. I have Medal of Honor and  that's the only game I like on the PS3. And does anyone know any good shooting games like shadowgun deadzone. Something offline and that's pretty fun. Someone help me pls.

    The XBox uses three PowerPC processors that run very very hot and need constant power and Mac's use Intel processors that run very cool in comparison.
    It would take a complete rewrite of the entire games code to make it work on a Mac.
    So in short, it can't be done. Sorry.
    But I'll clue you 2 free 3D games you can run on your MacBook Pro
    Cube 2 Suaerbraten and Nexiuz Classic.  That should help get you by.

  • Apple TV 5.2 update stops in the middle of Step 1 of 2

    It look like Apple TV 5.2 updat stops in the middle of Step 1 of 2: Preparing update...  It's been sitting there for over an hour. Why and what can I do?

    Welcome to the Apple Community.
    You can't do much else besides pull the plug. If it causes further problems you should be able to restore as below:
    Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
        1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
        2.    Connect the micro USB cable to the Apple TV and to your computer.
        3.    Reconnect the power cable (only for Apple TV 3)
        4.    Open iTunes.
        5.    Select your Apple TV in the Devices list, and then click Restore.
    On the other hand you may be able to simply start the update again. If however the update continues to fail, you should try the restore routine above.

  • Why did update stop my data, why did update stop my data

    why did update stop my data, why did update stop my data on my iphone4 on straight talk plan and apple unlocked the phone ?
    Always worked before ?

    Try http://iphone.tweakker.com and select straight talk.

  • 30 new songs dissappeared when apple update stopped sync in progress!

    so i downloaded songs on my ipod and later plugged my ipod into my computer to download them to my itunes library.. as they were syncing to my library a stupid itunes update stopped the progress mid sync and i cant find my 30 new songs anywhere... is there anyway i can get those back?! or is this another apple dissappointment

    i resolved my problem.. when u go to ur itunes library they have a fancy purchased tab in the itunes store that has all the purchased songs you dowloaded.. so they let u re-download your selected songs to your intunes library, then all u have to do is sync ipod.

Maybe you are looking for

  • IPhone 3Gs Connection Problems IOS 5.1.1

    I have an iPhone 3Gs on IOS 5.1.1 and when it loses connection to my carrier, also wifi is not connected.  It worked before on ios 5.0.  Is there a way to fix this? Thanks!

  • SAPUSER is locked in ECC 6.0 IDES SYSTEM

    Hi Everyone, I installed ECC 6.0 IDES SYSTEM, but the username SAPUSER is locked, I tried with various passwords but was not successfull. Is there any other way I can logon into it with this username or any other super username. Please help. thanks,

  • My ipod touch is able to connect to other people's wifi just fine, but it won't connect to the wifi at my house, what can I do?

    I have tried everything I can think of to fix this, there are a couple ipads, computers, and a gaming system that all connect to the internet. But my ipod just wont let me, some help would be much appreciated.

  • Logical standby db outage

    version 10203 logical standby db has outage , and is not sync with primary db, how to make it sync, outage was for 4 hrs.... SQL> EXECUTE DBMS_LOGSTDBY.APPLY_SET('PRESERVE_COMMIT_ORDER', 'FALSE'); will this solve the issue? & wondering how long it ca

  • Crystal Report Server

    I have Crystal Reports Server xi rel 2.  I post the report to the server and schedule it.  I then modify the report , group filter in this case, and save it to the server .  However the scheduled report does not reflect the changes.  I have to create