PS3 NAT

My brother and I are trying to open our NAT so that we can play multiplayer without having to wait forever to get added to a game, or get kicked out of the system multiple times. I really don't want to lag in the new AC3 multiplayer. Can anyone help?

Are you using a Cisco router? If you do then try the following steps. Set your modem to full bridge mode if you are using a DSL provider. Access the router's ui and set the router's internet connection type to PPPoE. Uncheck "filter annonymous internet requests" which can be found on the router's security tab. Assign a static ip address on your game console and open a port(port forwarding) on your router:  #udp:88,3074,53;  #tcp: 80,53,3074. To check if the port is open, try to check on this link:http://www.yougetsignal.com/tools/open-ports/.

Similar Messages

  • WRT54G with PS3 NAT TYPE 3 needs to be changed!

    Hi all,
    I've been trying to change my Nat type from a 3 to a 2. I have a ps3 20gig (sadly) that is directly connected to my laptop (wired). My laptop has wifi and I'm able
    to play games online. The only problem is that I'm not able to invite friends into my party or host any games for Call of Duty 4. My ps3 is set at Nat Type 3
    and I think that's the problem here. I have a Linksys WRT54G router and UPnP is enabled on it. My laptop has UPnP enabled as well. I've tried everything I could
    find, but there's not much info for someone who has a setup like me.
    I setup a static ip for the ps3 on my laptop, and the only ip that will work is 192.168.0.10.
    Here is my ipconfig:
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\Documents and Settings\MADE>ipconfig/all
    Windows IP Configuration
            Host Name . . . . . . . . . . . . : MADE
            Primary Dns Suffix  . . . . . . . :
            Node Type . . . . . . . . . . . . : Hybrid
            IP Routing Enabled. . . . . . . . : Yes
            WINS Proxy Enabled. . . . . . . . : No
            DNS Suffix Search List. . . . . . : no-domain-set.bellcanada
    Ethernet adapter PS3:
            Connection-specific DNS Suffix  . :
            Description . . . . . . . . . . . : Realtek RTL8168/8111 PCI-E Gigabit E
    thernet NIC
            Physical Address. . . . . . . . . : 00-17-31-25-3B-27
            Dhcp Enabled. . . . . . . . . . . : No
            IP Address. . . . . . . . . . . . : 192.168.0.10
            Subnet Mask . . . . . . . . . . . : 255.255.255.0
            Default Gateway . . . . . . . . . :
    Ethernet adapter Wireless Network Connection:
            Connection-specific DNS Suffix  . : no-domain-set.bellcanada
            Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Networ
    k Connection
            Physical Address. . . . . . . . . : 00-13-02-1D-36-FC
            Dhcp Enabled. . . . . . . . . . . : Yes
            Autoconfiguration Enabled . . . . : Yes
            IP Address. . . . . . . . . . . . : 192.168.1.101
            Subnet Mask . . . . . . . . . . . : 255.255.255.0
            Default Gateway . . . . . . . . . : 192.168.1.1
            DHCP Server . . . . . . . . . . . : 192.168.1.1
            DNS Servers . . . . . . . . . . . : 192.168.2.1
            Lease Obtained. . . . . . . . . . : Wednesday, November 21, 2007 12:39:2
    9 AM
            Lease Expires . . . . . . . . . . : Thursday, November 22, 2007 12:39:29
     AM
    Any kind of help would be apprieciated.

    IP Address. . . . . . . . . . . . : 192.168.1.101
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DHCP Server . . . . . . . . . . . : 192.168.1.1
    DNS Servers . . . . . . . . . . . : 192.168.2.1
    Your WRT54G is connected to another router (maybe your modem?) which has IP address 192.168.2.1. To get that working you have to configure port forwarding on 192.168.2.1 and on the WRT54G at 192.168.1.1. UPnP won't help you here because UPnP will only configure the WRT but not the router to which the WRT is connected to. Thus you have to set explicit port forwardings (don't know which ones the PS3 requires).
    Otherwise consider setting up the WRT as access point only like this.
    Or find out how to set the modem into bridge mode (i.e. turn off the router in the modem). After that you have to configure the router for your internet connection (usually PPPoE for DSL or DHCP for cable). This way you have the WRT54G directly connected to the internet.
    Message Edited by gv on 11-21-2007 05:41 PM
    Message Edited by gv on 11-21-2007 05:41 PM

  • PS3 NAT Type

    Hi there, anyone have a guide how to open up the NAT type on the PS3 with the HH4, on the main settings/test on the PS3 this is type 2 - used to be type 1 with my old provider. When using COD the NAT is set to moderate. this used to be open, before i got the HH4.
    I also set the IP address in the router to static with no success.
    Many thanks

    I'm not sure how to set up my modem in "pure bridge" mode
    Broadband ADSL2+ Modem DM111PSP User Manual - Netgear
    Please refer to item #3 on page 13 and also Page 64 in the User Manual, which explain how to do this.
    You must configure the modem in Bridge Mode or "Modem Mode" first and then configure the AirPort Extreme to connect using PPPoE. Enter your user name, password, etc., in the AirPort Utility setup, but leave the Service Name area completely blank. Connection should be "Always On" and Disconnect if Idle should be "Never".
    You cannot configure the AirPort Exteme to connect using PPPoE unless you first configure the modem in pure bridge mode, or "modem mode".
    This is the only way to obtain "Open NAT" using this modem and the AirPort Extreme.

  • Ps3 nat problem

    why cant u get a open nat with ps3 always on moderate how do u get it to open ?

    This link should help.
    NAT Problems on games consoles and computers
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • E1000 + PS3 =NAT Type 3 Help

    I know this has been asked before but nothing seems to work for me. My story is:
    I had a WRT150N with a modem in bridge mode and got NAT Type 2 while playing the PS3. The router crashed and I got an E1000 in its place it came with the basic setup CD so I ran that. Then I was getting NAT Type 3. So I called Linksys, and AT&T and neither could help me we opened the ports that Playstation gave me and made sure the UPnP was enabled and all the things they could think of to open my NAT type. But nothing has worked, so if anyone knows anything I could do please let me know. Its just hard to believe that its my playstaion when I had an NAT Type 2 before my old router crashed. I'll supply screen shots whatever you need, I just cant stand to have this NAT type cause it messes with my online gaming.
    Thanks for the Help,
    Grant
    Solved!
    Go to Solution.

    Did you set up PPPoE for the new router and put your modem into bridge mode? 
    I don't work for Cisco. I'm just here to help.

  • PS3 NAT Type 3 trouble! E1000

    the begin off the first week using this router my NAT type was 2 then after I updated the firmware to the recent one (check the date) but ive tryed so many tutorials on how to change it but no luck! ive tryed DMZ and opening ports somewhat.
    anyone got any ways to get me to NAT type 2?
    this sucks.

    Who is your Internet service provider?
    If it is DSL connection then make sure that your modem is configured in bridge mode.
    Open the setup page of the router and check the Internet IP address on the status page.
    Change the MTU size to 1365. Save the settings.
    Go to Security tab and uncheck the box ' Filter anonymous Internet request'. Save the settings.
    Is your PS3 wireless or wired to the router?
    You have already upgraded the firmware on your router. After upgrading the firmware on your router, it is recommended that you should reset the router and reconfigure it.
    Press and hold the reset button on the router for 301 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.

  • PS3, Nat Type 3

    Hi there
    I simply can't get rid of nat type 3! It's driving me crazy, with slow download speed! In order to get nat type 2, i need to add/open TCP and UDP ports.
    According to sony, i need these ports:
    TCP: 80, 443, 3478, 3479, 3480, 5223, 8080
    UDP: 3478, 3479
    http://manuals.playstation.net/document/en/ps3/current/settings/connecttest.html
    Since I got an airport extreme, I followed this guide:
    https://discussions.apple.com/thread/1721743?start=0&tstart=0
    UPNP is enabled on the PS3, and I know none of apple's routers support that.
    Have I missed something? How do I get nat type 2?

    Suggest that you set up the Apple router in Bridge Mode. Then be sure to power cycle the entire network.
    That means powering everything completely off...no standby, etc.
    Leave everything off for a few minutes
    Power up the modem/router first and let it run a minute by itself
    Then power up the Apple product the same way
    Continue starting devices one at a time until everything is powered back up

  • PS3 Nat Type 3 Cant change Using Wrt120n

    i
    have listed all ports udp and tcp i have disabled UPnP i have changed mtu to 1364 and tried 1365. i have rebooted both router and modem. still no success. Cant seem to change nat type 3 to nat type 2. plz does anyone know of anything else i can do. i am use a WRT120n wireless router

    I think you have one of those modem/router combos, and that you're cascading into a wrt120n. Does your modem/router combo have wireless or multiple ports?
    I have a suggestion:
    Since your wrt120n's ip address is 192.168.1.1, try using the DMZ on your modem and give it to your router's address. Then forward the ports from your router to your PS3. I hope that will help. Also set the PS3 to automatically acquire it's IP address and DNS server.

  • PS3 NAT Type 3 with WRT160n v2.

    I am getting NAT type 3 on my PS3 and Strict on my Xbox 360. I had Brighthouse but I just moved and now have Embarq/Century Link. With Brighthouse I had NAT Type 2 on my PS3 and Open on my 360. What gives? Even if I run a cable straight from my modem to my PS3 it still shows NAT Type 3 and it will show Strict on my Xbox 360.

    Who is your Internet service provider (ISP) ?
    Well, it is not quite clear with the post that who is your current Internet service provider. But as per my understanding it seems that you are using DSL connection. So, what's the connection type are you using PPPoE or DHCP.
    If you are using DHCP connection then contact your ISP and tell them that you want to use PPPoE connection .This should fix the issue for you.

  • PS3 Nat Type 3 - Airport Extreme Router

    Greetings internet people;
    I am an Airport Extreme user (connected to a Motorola 2210-02 DSL modem via ethernet) - with a PS3 who is finding it incredibly frustrating to get my network to work with my PS3 in NAT 1/2 -(Modern Warfare 2 is difficult with variable lag/no party invites).
    This is my current network layout:
    http://grab.by/ABS
    Modem information screen:
    http://grab.by/ACb
    Our ISP is Bellsouth (AT&T) and the modem is currently set to PPoE. I think I set up port forwarding to a static IP for the PS3, but still, nothing I've done/read online has worked, or I haven't done it right.
    (I tried plugging the PS3 directly to the modem and it still remains in NAT Type 3.)
    I need the network to stay in tact - so that wireless works etc. I could set up the switch between the modem, but I'm still not sure if that'd do it. ----
    Any help would be greatly appreciated, I want to figure this out so I can actually play my PS3 online :<
    Peter

    I have the same Motorola model 2210, but the screen shots in the original post were different, so you may have to search a bit for things.
    The 2210 provides NAT service, and the only way to hook it up to the AEBS to Connect Using "Ethernet" will result in the double NAT because the AEBS is also furnishing NAT services.
    You will need to use the web interface for your modem and you will probably need to plug it into your computer to configure it. The setup page(s) on my model will display when you enter 192.168.1.254 into your browser. Check your documentation to see if you will use the name address or a different address.
    When you log into the modem, look for an Advanced setting, PPP Location, or similar. You need to change the PPP setting from the current "On the Modem" to "On the computer or router". If there is a setting for "Bridge Mode", you can use this as well. Update to save changes on your modem and it will restart.
    Important...you may not be able to get back into the modem configuration again unless you reset the modem by holding in the reset button for approx 10 seconds. Then you will be able to reconfigure the modem if you need to do so.
    Reconnect the modem to the AEBS and open AirPort Utility - Manual Setup. If AirPort Utility does not "see" the AEBS, temporarily connect an ethernet cable from your computer to one of the LAN <-> ports on the AEBS and try again.
    After you click Manual Setup, click the Internet icon at the top of the setup pane and look for the Connect Using setting. You need to change this to PPPoE. Then enter your user name (probably your email address with the ISP) and password. Important....leave the Service Name area completely blank. Do not enter anything here.
    Click Update and the AEBS should restart with a green light in about 20 seconds. You have now eliminated the double NAT between the modem and AEBS. Sorry, I can't help with details on the game console, so there may be some additional configuration needed for that device.
    Please post back on your progress.

  • Airport Express and PS3 Nat Type 3

    I have a Airport Express with a Cisco DPH151-AT modem for AT&T DSL. I'm having a lot of problems trying to get my PS3 get a Type 1/2 Nat, but all I get is Type 3. It's causing a lot of lag and unable to join groups or connect in certain games. Can anyone help me?!?!

    I'm confused about this microcell device. What exactly does that mean
    A microcell is basically a small version of a cellular tower. It is intended to provide cellular service in a location where the current service is too weak. It provides, in this case, a cellular 3G network to be used by cell phones. It does NOT provide a Wi-Fi network for your computers or PS3. For that you would need either a Wireless Access Point (WAP) or a Wireless Router.
    Now the Airport is directly wired to the Cisco DPH151-AT. So is this just a basic modem/router setup? The Cisco DPH151-AT being the modem and the Airport being a router?
    The Cisco needs to be connected to either an Internet modem or router in order to access the Internet. I'm not 100% sure, but I don't think that this is a dual-use device that functions as both a DSL modem & 3G microcell.
    Is the Cisco connected to another device? If so, what is its make & model?

  • Airport Express PS3 Nat type 3 problem

    Recently I bought a Playstation 3. I have succesfully created a connection using the airport express connected to my speedtouch modem. The problem is that when I do an internet connection test on my PS3, it says that UPnP is unavailable and NAT type is 3. This is a major problem because I can't join chats or games, how can I get NAT type 2? It would be greatly appreciated, Thanks in advance...
    Message was edited by: EDuranMac

    I've done that already, foward the ports I mean. Right now I have my PS3 under DMZ and I'm still getting NAT type 3. Since it wouldn't hurt to try this again (forwarding the ports) I will, meanwhile I have a question: do I need to disable UPnP on both the router and the PS3 or leave enabled? Also, does it hurt to enter the PS3's ip address in the DCHP reservation or do I need to leave it outside?
    Message Edited by Alakratt on 06-22-2008 08:26 PM

  • WRT120N WITH SPEEDSTREEM 4300 PS3 NAT 3 ISSUES

    I HAVE A WRT120N ROUTER WITH A SPEEDSTREEM 4300 MODEM. I HAVE TRIED PUTTING MY PS3 IN THE DMZ VIA THE MAC ADDRESS, (PLAYSTAION NETWORK SAYS THAT SHOULD WORK). IT DIDNT. I TRIED ALL THE PORTS LISTED FOR THE PS3 THAT DIDNT WOKRK, I HAVE ENABLED UPNP I HAVE DISABLED IT, I HAVE TRIED EVERYTHING. PLEASE IF ANYONE HAS HAD THIS SAME PROBLEM WITH THIS SETUP PLEASE POST THE SOLLUTION. THX

    rkerr08 wrote:
    Ethernet adapter Local Area Connection:
       Connection-specific DNS Suffix  . : domain.invalid
       Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet
       Physical Address. . . . . . . . . : 00-1B-24-C3-37-E5
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::e0ba:c38a:b17:1ee%11(Preferred)
       IPv4 Address. . . . . . . . . . . : 192.168.254.2(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Lease Obtained. . . . . . . . . . : Friday, February 11, 2011 1:09:17 PM
       Lease Expires . . . . . . . . . . : Monday, March 20, 2147 7:38:15 PM
       Default Gateway . . . . . . . . . : 192.168.254.254
       DHCP Server . . . . . . . . . . . : 192.168.254.254
       DHCPv6 IAID . . . . . . . . . . . : 234887972
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-93-51-64-00-1B-24-C3-37-E5
       DNS Servers . . . . . . . . . . . : 192.168.254.254
                                           192.168.254.254
       NetBIOS over Tcpip. . . . . . . . : Enabled
    As you can see the SpeedStream is a NAT router. The IP address of the Speedstream is 192.168.254.254.
    You have three options:
    1. Configure forwardings on the SpeedStream and the WRT. I would not recommend this.
    2. Use the SpeedStream as router and the WRT as simple access point and not as router.
    3. Set up the SpeedStream as modem, i.e. put it into bridge mode, and then configure your WRT for your internet connection and use only the WRT as router.

  • WRH54G - PS3 Nat 3

    Would someone be able to get me a NAT2 to able to play modern warfare 2? Voice ingame is very choppy and plenty of times that I am unable to connect to host.

    Follow this link and check if that helps you.

  • BT HH5 online connection issue (NAT)

    Hi,
    I found out that I was getting a moderate NAT type on my PS3 (NAT type 2) which didn't let me play GTA online at all. A friend of mine also had the same problem and he has HH5 aswell. I've tried to port forward my ps3 and GTA online and it would just not let me to, gives me that error where it says "The game or application you’ve selected conflicts with an application ()" I usually use Wi-Fi and since it doesn't let me go online, I tried using Ethernet cable and still no difference. I tried A LOT of things and still no luck at all. I've had absolutely no problems when I had Home Hub 3, but HH5 is just annoying and a waste of time and money. Can you please fix this?

    The NAT on CoD AW can be open one day and moderate the next for me.
    I just don't think the HH5 is any good.

Maybe you are looking for