PS3 not picking up my router

i have a WRT160N brodband router and ive tried everything to get it to work but nothing seems to. ive tried unplugging it and reseting it but nothing works!

When you go to the wireless tab @ 192.168.1.1, make sure the mode is set to
mixed.
I don't work for Cisco. I'm just here to help.

Similar Messages

Schema ID and Category ID is not picked in case routing

Dear Experts,
Currently I am working on SAP CRM 7.0 SP06. Now I am trying to do the settings for case routing based on rule policy.
I have done the following settings for the above requirement.
I have defined application area (as Case Management) in multilevel categorization.
I have created category schema in web ui with application id as case management.
I have created rule modular as if case category is xxx then route to xxx Org unit.
I have maintained this rule policy under service manager profile.
Now the problem is when I hit escalate button schema id and category id is not picking so my rule is getting failed.
Could you please advice if I missed any settings and also please share if you have some document which will explain steps to get the above functionality.
And also please let me know where we assign Reference category ID to a case.
Kindly share your views over the same.
Thank you.
Regards,
Babu.

ok

Varient Configuration prod order is not picking the super routing operation

Dear Experts,
In varient configuration,I have maintain Super routing and Super bom for KMET material.While creation of prod order or converting plan order to prod order,Routing is not getting selected.I have maintained dependency and have checked Production sheduling profile,order type and order dependent parameter,all is ok.Even the Super Bom is getting selected after MRP run as per my requirment.
What I am not getting is selection of routing for production order.Can any of the expert help to find the missing link.
Regards,
Rajesh Prasad.

Hi
For material Variant (FERT) production order Routing is not picking?Just check the Selection condition which is assigned to the operation is same as the selction of material variant i.e., Char & Char values has configured in MRP 3 View of Material variant.
Check this and revert back
Regards
Praveen

Router not picking up modem. (Please Help)

Hello there, I have been using my linksys e3000 router for almost 2 years... no problems at all..
But today a storm came and for some reason after the power outage my router no longer seems to pick up singal from my modem... everything will light up...the wifi light.. and the lights '' 1...2..3...4 '' but the light showing there is internet will not come on at all....everything is setup right... I can't access the Linkys 192.168.1.1 page anymore.... I tried to reset the router to default settings and nothing will happen.... it will not get singal from the modem at all...
I'm not sure what to do at this point...my internet works fine as I am on here from a direct connection from the modem...so the problem is my router... it will not pick up any form of singal from my modem... I have tried putting in the disc that came with the router...restarting the router....resetting the router... restarting the modem...my pc...nothing will work... is there anything I can do to get my router working again?
Thanks for any help.

If I am mistaken, your modem’s ip address is probably 192.168.1.XX and that’s the reason why the router’s ip address has been changed to 102.168.1.1. I would suggest that you start from scratch by disconnecting the modem from the router and to reset the router. You can then follow the steps below to manually configure the router based on the internet connection type that you have subscribed.
Setting up your Linksys router with Cable Internet service using Linksys Smart Wi-Fi
Setting up your Linksys router for DSL connection using Linksys Smart Wi-Fi

Sub:ck11n not picking the routing automatically

Hi Guru,
Create cost estimation (ck11n) ,not picking the routing data automatically

Dear Jothi,
Goto OKKN,check for the costing variant under quantity structure control tab,whether the routing selection ID is assigned properly.
Say if selection ID is 01 and the first priority is for N task list type(that's normal routing),then the system will pick it automatically.
Likewise if it fails to find N,then it searches for the second priority given in the same selection ID.
This is how it picks for costing in CK11N,Also check the routing status in CA03,under header whether it's 4 - released and usage
is for 1 production.
Check and revert
Regards
S Mangalraj

Routing not picking in prdn order

Dear Gurus
While creation of production order the system is not able to pick up the operations of routing instead it is generating an operation
in the production order itself with the status opgn.In the log for read pp master data in production order it is showing Sel. ID 01, priority 01 for task list type N selected. This is okay as I have maintained in selection id 01 the usage 01 and status 04 the same I have maintained in routing.If I remove the workcenter from the operation of the routing then the system is picking up the routing.I have also checked the workcenter usage it has application p that is of routing. Please advice.
Regards
Sandip Sarkar

Hi Brahmankar,
As per your reply to this thread -
Dear,
OPGJ setting is for order type and plant so it is having priories over the setting of OPPQ. So please delete the entries from OPJG and check it again.
Regards,
R.Brahmankar
Hi have tested this scenario and found system selects the routing maintianed as master data however I have also maintained the default operation in OPJG,
I am also facing the same issue as my production orders are not reading the routing master data for some particular materials/orders.
For most of the cases it is picking up the routing as expected. Please advise.
Thanks.

My laptop has access to the internet...through my router. my i phone though it says it's connected to internet will not pick up internet. three people came over with apple prodcuts and they couldn't pickup internet in my house either.

My I phone though it says it's connected to internet in my home (using my modem/router) will not pick up any internet in the house. Had company all three people had apple products and they couldn't pick up internet in my house. uisng my router/modem password. My laptop has internet and is fine..but not i phone.
i have done everything--unplugged router, modem, etc. called help line on Opt..they redid router #...etc. still not working on my internet.
why?

Is it a 5ghz router?
If so, iPhones only support the 2.4ghz Wireless b/g/n band.

A way to NOT pick up next door's wireles router?

Hi, is there a way to not pick up next door's wireless router? It seems that everytime take my laptop to my lounge, it picks up next door's wireless router?
I have my own wireless router set up in my preferred network but it always picks up the next door neighbors one?
anyway to stop this?
thanks

I have somewhat the same problem but i dont have my computer automacly connect to the network, it asks me what to do.
you can change your settings in
Apple>System Prefreces>Network>Airport Configuration
Use the tap to choose:
By default, join : prefred network.
remove any networks from the list you dont want to connect automactily with.
hope this helps

My iPhone 5 will only connect and keep connected if I am about 5feet away from my router. It also will not pick up other wifi sources and will drop Bluetooth. What can I do to solve this problem?

My iPhone 5 will only connect and keep connected if I am about 5feet away from my router. It also will not pick up other wifi sources and will drop Bluetooth. What can I do to solve this problem?

Are there any other wireless devices that might cause interference?
Also are there any nearby Wi-Fi networks that might have the same name as yours? It amazing how many Linksys Wi-Fi networks are out there.

Macbook - Scanner not working following new router

Hi all,
I'm not sure if this is the right place, after 2 days I think I need some help.
I've had my Macbook Pro since October and 2 days got a new Netgear Router from Orange to start using 801.11n on the Wifi. I connected through Wifi OK, but couldn't get my HP4580 printer wifi enabled, it was picking up my old router. I gave up after 5 hours, the next day I turned my Macbook up and it picked up the router BUt then I lost Wifi for the internet. Anyway, a day later I have now managed to get my wifi working for internet and my printer, which I was dead please about. However, my scanner has now stopped working - it was working fine yesterday, when I has internet but no wifi to the printer. But today, it keeps saying scanner warming up. I even managed to get the scanned image up in teh window but it won't scanner so the connection looks like it is working (I have to scan with my USB, that's in OK). When I start HP Scan it says there's a problem and it just hands forever.
Any ideas?

Hi,
I may still "remember" the old IP address. Please use the following instructions to fix:
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My apple tv is not picking up my iTunes library?

I have my Apple tv all setup and working. it's connected to my wifi. However, it is not picking up my Itunes library. I have the right I.D. and password on. I've turned on home sharing on all my devices. I've reset my router and even turned of my firewall... Any other ideas? PLEASE HELP!!!!
Thanks

Unless you have a first generation ATV it will not show up in iTunes. The 2nd and 3rd gen ATV's do not connect to iTunes that way. They just connect via a service called "home sharing". You never see them in iTunes.

HT1600 am trying to connect my wireless keyboard to my apple tv and it stays in a searching mode and does not pick it up. help

am trying to connect my wireless keyboard to my apple tv and it stays in a searching mode and does not pick it up. help

Welcome to the Apple community.
There probably isn't a lot you can do, since the router settings will be beyond your control. Many such services in hotels and the like, use a system whereby you need to login through a webpage, since the Apple TV cannot display webpages, there is no way around this. You would probably be best asking at reception if this is the case.

Cost estimate (CK11N)is not picking the overhead cost for some of the mat

Hi all,
we are facing a problem. The overhead key is defined. the calculation base is defined in the cost sheet. But the overhead cost is not picking for some of the materials
Bad Material 5019-0581 via CK11n.
As you can see in the itemization, only the material and the routing are listed. No amounts from the OH of ZPTA ( .10). It should show a line #5 with an amount of (28 quantity x .10) = $2.80 added to the Total value.
first three line items it is picked from material and fourth line item from the internal activity.
the fifth item from G overhead is not picked.

Hi,
Check whether u have assigned the cost sheet in u r costing variant which is being used in CK11N.
Regards
SudhakarReddy

Not picking up ethernet connection

Hi,
I am using a WRT54GS. its and old one about 1 years old was working with my SBC Yahoo SpeedStream DSL modem well.
recently I switched to Cable. Now the CAT5 (rj45) that comes out from the cable modem works well with my HP n6120 office laptop picks up the Ethernet connection well and I am getting the wired connection with no problem.
however WRT54GS not picking up the ethernet. internet light is just blinking. as if its pooling but not finding any network. same thing happening if I try to setup it up as a HUB or access point.
Is there any setup I can change in the router? to make it work.
I dont understand how come the wired connection working with the laptop and not with WRT54GS. this is a good working model not too much used also.

Yes I tried with the cable comes with the router and then with another one that is hand made. Wired but someone told me that the ISP is running a 24online client at their end. if true, it probably is tracking my MAC address. Even if that is true, I clone the mac address, that should hv been worked.
next why the internet light goes off and on at the router, as if its not finding any internet. where as if connected to the PC it just works good. could there be any other wireing issue.

Tax value is not picked up correctly for the condition type in SO creation

Hi All,
I have a issue in Picking up Tax value correctly for the condition type in SO Creation.
Actual Issue:
When creating the sales order manually,
tax value is picked up correctly for one condition type: ISS3.
When the Sales Order is created via Idoc using the function module 'idoc_input_orders', tax value is not picked for same condition type: ISS3.
We need to find out why the value for the condition type 'ISS3' is not picked in this way!
Can anybody solve this issue!
What can be the reason which is stopping picking up tax value for condition type: ISS3 when Sales Order is created via F.M 'IDOC_INPUT_ORDERS'! While it picked up the same while creating Sales Order manuallly.
Thanks in advance.
Thanks,
Deep.

Hi All,
Can anybody give the solution for above posted issue!
Working:
When creating the sales order manually,
tax value is picked up correctly for the condition type ISS3.
Actual Issue:
When the Order is created via Idoc using the function module 'idoc_input_orders',
tax value is not picked .
I need to find out why the value for the condition type 'ISS3' is not picked.
I have debugged the issue from WE19 but upto Conditions tab it is picking up tax value but then it is becoming zero again it remains zero after saving SO.
But Manually tax value is picked up for condition type ISS3 and remains same after saving order.
I have debugged it several times fro WE19 but not able to find route cause for the issue.
What can be the issue over here!
Can anybody give me solution for the same!
Thanks in advance.
Thanks,
Deep.

PS3 not picking up my router

Similar Messages

Maybe you are looking for