PS3 (Playstation 3) issue not loading BDR Bluray | Adobe Encore CS6

I recently created a Bluray using Adobe Encore CS6, and the Bluray is not loading on my PS3, but is working fine on my other player (LG, Toshiba and PC). Does anyone have the same issue and found a solution? I need help on this as most of my client use their PS3 as Bluray player.
Authoring program: Adobe Encore CS6 with the Creative Cloud latest update
PS3 with latest firmware update (PS+ member with auto-update: on)
Video files: 1920x1080 FPS 23.976 Program Stream MPEG-2 for Bluray *.m2v (transcode with FCP Compressor)
Audio files: Dolby Digital Audio *.ac3
Burner software: CyberLink Power2Go V6
Burner hardware: HP BD Writer bd340i
Media: Verbatim BD-R 25GB 6x Speed
Project size: 20/25GB
The project setting in CS6 is: Blu-ray NTSC with MPEG-2 Codec at 1920x1080 at 23.976FPS
The “Check Project” shows no error. I build (output) as an image, then burn the *.ISO file using CyberLink Power2Go.
The BD-R work fine everywhere (LG & Toshiba player) except on my PS3. The BD-R has the BDMV and CERTIFICATE folder, so I don’t know why my PS3 don’t recognize it. And I have three PS3 at home; 1xPS3 80GB version (3yrs old) and 2xPS3 super slim (1yr old). All three are unable to see the BD-R. My PS3 work fine with all other media (games & movie Bluray); and I highly doubt that all three have trouble with the Bluray player.
I did the same process last time (in 2013) and everything is working fine, all the same configuration, except I used Adobe Encore CS4. My PS3 was able to read and recognize the BD-R. But since CS6, my PS3 don’t see the BD-R. I also put back the copy that I did last year with CS4 (just to make sure that is not a PS3 firmware issue) and the Bluray work fine. The media (Verbatim) come from the same tower (leftover from last year).
So everything point toward CS6…is there something that change from CS4 to CS6 for Bluray creation? Jumping from Encore CS4 to CS6, I don’t see anything different, but look like there is, because the Bluray can no longer be played on my PS3. Please help!
Toronto Montreal Wedding Photographer | one-blink Montreal & Toronto Wedding Photographer | one-blink photography

Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no player is required to read a burned disc, having a "good" one from a high quality blank will help

Similar Messages

LR4 Problem: The file could not be edited because Adobe Photoshop CS6 could not be launched.

Is there a fix for this? When I try to edit an image in Photoshop from Lightroom 4 (CTRL+E), Photoshop CS6 launches immediately but with no image. In Lightroom 4, after about two minutes, the message box appears saying "The file could not be edited because Adobe Photoshop CS6 could not be launched." When I click OK, the image promptly opens in Photoshop CS6 like normal. This wan an itermittent issue for me after the LR4.1 release. I was hoping that LR4.2 would help, but now I get the error every time.
System
Lightroom 4.2 x64
Photoshop CS6 v13.0.1 x64
Bridge 5.0.1.23 x64
Windows 7 Pro x64
AMD Six Core / 3.9 Ghz
16 GB Memory
NVidia Quadro 1 Gb Video
Scratch space on three drives

This may be a cooincidence, I starting having problems after I started using a Nikon D800, which has 36MP files. LR4 released at the same time as the D800. LR4 shows signs of struggling with the larger files, which are typically 280MB TIFFs for the D800, like freezing for several seconds when using an adjustment brush or going into a spasm with the crop tool. Because Photoshop does not have similar large file issues, I'm doing more basic work in Photoshop, like cropping, dodge and burn, exposure adjustment, etc.
Because Photoshop otherwise runs fine, and appears to read all the prefernes properly mid-issue, to get a better idea of what's going on, I turned on Process Monitor from Technet. For what it's worth, LR4 appears to touch the Photoshop preferences before it launches Photoshop. LR4 must have a memory leak in that corrupts the Photoshop preferences file in a way that makes no difference to Photoshop.
My weekend project is to try Capture One to see if I can spend more time on photography and less troubleshooting Adobe problems. As it stands, LR4 is not usable for me.

FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6

Could you please attempt to shed some light on why FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6, yet apple finder is able to display thumbnails for these same FLVs without issue?
I'm running CS6 Production Premium with ALL updates installed on 10.6.8
I appreciate any input and help provided the input is provided by someone who either
A) knows the answer because they actually work for adobe
B) actually tried this themselves before attempting to provide a solution
If the conclusion is that it is a codec issue or a header issue with the FLVs You'd have to present a very strong case to back that claim up as it makes no sense whatsoever that CS6 is unable to generate thumbnails for media encoded using CS6, yet Apple finder can without issue. NOT to mention the FLVs in question are CREATED on the same machine with the same codecs installed that is trying to generate previews in Bridge.
Apologies if my frustration is showing, I've gotten and seen several... incompetent replies on this forum regarding this issue and it has never been actually addressed properly as far as I can tell by Adobe support.

We are all just incompetent users here. As pointed out before this is just a user to user forum, Adobe rarely checks in.
I was hoping by now you would have gotten to the bottom of this problem and were offering a solution.

Adobe Encore CS6 Licensing issues

Adobe Encore CS6 licensing: Cannot be run in trial mode. Please relaunch the application and provide a valid serial number.
Uninstalled and reinstalled the application, ran the 6.0.2 update. When the error comes up, it does not give me a window to enter the proper serial number. The user has Adobe CS6 Production Premium installed and every other component is registered correctly.
What can I do from here?

Sorry I couldn't help... when I installed CS5 Master Collection Encore was "automatically" registered... along with all other parts of the MC... when I entered the serial number during install
As far as I know, there is no way to individually enter a serial number in Encore... it is SUPPOSED to be registered when you enter the number during install
So, calling the activation number may be your best option
Also, to un-and-re install, read below
Read first... I think this is also for versions later than CS5
CS5 Clean Script http://kb2.adobe.com/cps/829/cpsid_82947.html
or http://www.adobe.com/support/contact/cs5clean.html

Adobe Encore CS6 loading problem

Every time i leave my app and come right back into working on my project, a few seconds in my cursors gives me the apple loading symbol. Why does this happen? it slows down the process so much. As long as im in the app working theres no problem but the second i leave the program and come back to work it gives me the loading symbol again. Its becoming a annoyance.
I use a mac osx 10.8.4 procesor 2ghz intel core i7 with 8gb of ram
im able to do all my video editing and photo editing fine except with adobe encore (loading cursor problem)

I would first look at Encore Edit -> Preferences -> Memory. May be swapping out memory. 8 Gig RAM is not all that much.

Dwg files are not being recognized in Adobe Ilustrator CS6

I have a client that recently upgraded to Adobe Illustrator CS6 ver 16.0.0.0 and cannot open dwg files through the application. Has anyone seen this issue or have a fix?
Thank you
cgervasio

DWG files from where? Using what DWG format/ flavor? What system? What else? You need to be much more specific.
Mylenium

Can't load project file in Encore CS6

I can't seem to load my project file anymore. I was working on a BluRay project and when I now try and open my project file it just hangs at about 13% open. Is there any way to salvage my work? I'd hate to have to start over. It has mostly Dynamic links to Premiere Timelines and subtitles. I didn't get to the navigation parts or sound. Any ideas?

Yes, Premiere is open, but it doesn't have any effect on opening my Encore project. Any other ideas?

Why can't I choose 720p AND 25fps when authoring a bluray in Encore CS6?

My master files are 720p, 25fps. I do not want 50fps (horrible).
Now it seems my only option is to upscale.
Any idea why I can't pick 720p and 25fps?
Cheers
Steph

stephbubble wrote:
Well for 1920x1080 it must be allowed because it's an option and it is working at 25fps so I went with that.
But alternatively, I could choose NTSC (means kinda nothing these days, does it?) and go for 24fps.
blu ray players these days play NTSC or PAL regardless, right?
Er, no.
You are not allowed to use 1920x1080x25p in BluRay. It is not in the specs.
Allowed streams are as follows:
i/.     1920x1080 (aka"Full HD") allowing frame rates of 29.97i, 25i, 24p and 23.976p
ii/.     1440x1080 allowing frame rates of 29.97i, 25i, 24p and 23.96p
iii/.     1280x720 allowing frame rates of 59.94p, 50p, 24p and 23.976p
iv/.     720x576 allowing a frame rate of 25i
v/.     720x480 allowing a frame rate of 29.97i
Be very, very careful about going from 25 to 24 as you will often get ffame blending problems, and there is a very real chance of a slowing down of playback speeds as certain tools will convert frame for frame, outputting just 24 per second instead of the actual 25 per second.
Players are generally pretty universal, TV are not.
Most if not all modern PAL sets will output either NTSC or PAL-60, but most NTSC sets will not output PAL in any way.
If Encore is allowing 1920x1080x25p and not 25i, then it is wrong, and off spec.

Adobe Encore CS6 not adding MXF files

OK ill try to explain this. Ive upgraded from cs 5.5 to cs6. I thought id have a play with Encore. I opened up a new project and went to import an MXF file but i keep getting this message.
'The Software that's used to decode the media is not available on this system. Installing the correct decoders for the files you are working with may help to correct the problem'
Ok but if i use dynamic link from Premiere the files work fine and dandy. Also if i open up an old prject that contains MXF files they load but in the monitor menu i just get the red adobe 'media offline' screen.
any ideas people?

I don't use that type of file, but does it match the parameters listed in http://forums.adobe.com/thread/622722

Schlechte Qualität bei Ausgabe von DVD und Bluray in Encore CS6

Guten Tag
Ich muss für ein Schulprojekt dringend eine DVD UND eine Bluray brennen.
Wie bekomme ich hier nun die beste Qualität hin?
Der Film ist praktisch fertig, doch beim Ausgeben des Films via Dynamik Link in Encore, kommt eine miserable Qualität heraus.
Ich habe 1920x1080 50p als Quelle.
Ich kann ja auf Bluray nur 25p ausgeben, weshalb mir beim H.246 Blu-ray Format schon automatisch oberes Halbbild angegeben wird. Progressiv kann ich gar nicht erst einstellen.
Auch wenn ich die DVD in Standart Format rendere, jedesmal wenn ich mir die Bilder nacher anschaue habe ich eine richtig miese Qualität. Das geht von verpixelten Bildern bis zu "Streifen" im Bild (wahrschienlich von den "erzwungenen" Halbbildern).
Ich habe fast alle Formate und Einstellungen durchprobiert und weiss auch nicht, was es genau mit diesen Bitraten auf sich hat, da ich noch sehr "neu" beim Filme produzieren bin.
Wie schaffe ich es eine Bluray zu brennen, welche eine gleich gute Qualität wie die Bilder meiner Cam (auch 1920x1080 bei 50p) und eine DVD ohne Pixelrennen zu brennen?
Ich danke für jede Hilfe!
Liebe Grüsse

Das wird irgendwie an den beiden Halbbildern (PAL) liegen. Deshalb sieht man den Fehler nicht am Computer.
Kannst du nicht das DVD-T Material außerhalb von Encore nach MPEG2 für DVD entcoden? Also mit einem anderen Programm?
DVD-T ist ein anderes MPEG2-Format als bei DVD.
Martin

Video not exporting right from Adobe Flash CS6

I'm trying to export a new animation short that's 30 seconds with sounds in Adobe Flash CS6, but it comes out somewhat pixelated and the sound is way out of sync while in the flash file it's just perfect. I try making changes for the Quicktime file, but it changes nothing. It comes out the same way. I don't know what I'm doing wrong. Can anyone offer any help please and quickly?

Rob Dillon,
Thank you for responding.
Here are some screen shots of my stats. I'm actually going to try resizing my piece to see if that'll help with the export.
Hope these answer your questions and thank you in advance for your help.

Web pages sticking or not loading

Hi, the problem Im encountering is that when I open a new webpage from a site Im already on it loads incredibly slowly if at all.
For example (and this is the most often occurring) when Im trying to sell an item on Ebay I can enter the site, go to the selling page without a problem and start the process of entering data for the item. When I click on the button to add a photo the new page opens, the title appears and the page stays blank. Eventually after 10mins or so some of the text will load and the page will look complete but when I select a photo and try to upload it it sits there with the loading icon spinning and does nothing.
Other web pages have given similar issues - not loading, icon spinning and yet others seem ok
BBC iplayer works ok, 4OD frequently hangs part way through a programme - I watch it via my PS3 and occasionally cant even log into PS Network.
The speed test says Im getting over 6Mb to my laptop, over 7Mb to the hub, the local exchange is about 60metres away.
This may well be nothing to do with the broadband speed but I have to start somewhere!
regards
Mark

ADSL info as requested
Connection Information
Line state:
Connectedppp0_0
Connection time:
0 days, 06:12:29
Downstream:
7.438 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
12.2 dB / 18.0 dB
Line attenuation (Down/Up):
10.7 dB / 7.0 dB
Output power (Down/Up):
15.8 dBm / 11.9 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
1 / 5
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 0
Error Seconds (Local/Remote):
1 / 1

"could not load any writer" when changing render settings?

When I change my render output settings from Quicktime Movie to something like H.264, I get an error saying "could not load any writer, adobe media encoder will now exit". Does anyone know how to fix this?
When I select Quicktime Movie then change the compression type to H.264, After Effects then tells me "for reliable output with H.264 compression, please choose it directly fro the Output Module..." which then puts me right back where I started with this posting.
Any suggestions?
Thanks!
Kristin.

@Kevin: The MPEG stuff being defunct should not affect fresh installs. So it's definitely some other app "stealing" the CoDecs. In what order are you installing? Perhaps having Nero, some DVD-player software or something similar inbetween? Did you deactivate the products before re-installing? what formatting options did you choose?
@kristin: As Jonas said, check QT. In addition, I would attempt yet another re-install, but this time taking care to really manually survey the progress. I'm suspecting that some of your files never get overwritten, so the config issue remains in place and your modules don't show up. So deactivate the app, uninstall it, run the CS3 clean scripts. Before re-installing, check your Library/Application Support/Adobe directory and the Preferences directory. Rip out any pieces that look suspicious and may be related to After Effects or Premiere/Encore, in particular MediaCore. Furthermore, remove any installer logs and remnants in the respective directories (Library/Logs, library/Application Support/Adobe/Installers). The packages are recognizable by their icon and the logs have the respective names of the product.
Mylenium

PE 9 will not load after installing Elements 10

Installed Elements 10 on Vista 64-bit. Did not uninstall Elements 9. Now PE 9 will not load; get window Adobe Premiere Elements.exe - No Disk. There is no disk in the drive. Please insert a disk into drive\Harddisk2\DR2. Tried disk 2 of 3 from package, nothing happens.

Tried twice, PE9 still locked up both times - I think the intent is to have me try PE10, because that did work!!!
From: Steve Grisetti
Sent: Monday, January 02, 2012 7:09 PM
To: cptiger
Subject: PE 9 will not load after installing Elements 10
Re: PE 9 will not load after installing Elements 10
created by Steve Grisetti in Premiere Elements - View the full discussion

Problem loading images in adobe bridge html photo gallery

Can someone please, please help me!? I can not figure out why the images will not load in my adobe bridge html photo gallery cs5. I am not getting any error messages in Firefox and just the x in internet explorer.
Here is the link to the gallery page on the site: http://www.irishwetlands.ie/Gallery.html
I created the gallery as a html file for compatibality reasons due to accesbility issues with flash, and followed the general insturctions. The gallery folder is called wetlandsgallery and it is loading everything style-wise except the images themselves.
I then made the gallery within an iframe so it would be more similar to the other pages on the site and contain the menu bar - but no change on the lack of images!
Having looked around online I think it might be something to do with the bin folder?? Does this have some secutity somewhere thats protecting the images? I am also unsure if I filled in the FTP info correctly when creating the site as I was getting the message "could not connect to FTP server" so I had to copy over the file from my hard drive to the server provider files. All the tutortials say to load your gallery and no mention of what to do when it won't connect to FTP server.
If you could also tell me how to edit the image sizes that would be a great help too, as any size changes I make to either the bin/large or bin/thumnail images makes no difference in what appears in the preview?
Help would be very greatfully appreciated as I am pulling my hair out trying to figure it out with no sucess and a possible bald patch!
Thanks in advance,
Áine

Hello Áine,
1. Is it really necessary to comment out this part in your source code?

Using your source code without these things I could see some of your images.
2. Looking to your website with my IE8 into image 7 (e.g.) I saw this:
what means there is a reference to a html file, not to an image. ???
3. Here it becomes interesting (completely contrary to my point 2.), looking for your path:
http://www.irishwetlands.ie/images/GalleryImages/Gallery1_Selection%20of%20IRWC%20members% 20at%20the%20Gearagh.jpg
I can see this image in my IE8 (some people in front of a "wetland". But still I've to assume (as Murray already did too), that there is something wrong with your upload and the pathes.
4. Allow me to make one brief point, we talked about here on several occasions: please don't use spaces in image, folders or filenames. I'll quote Murray: In general, URL encoding spaces does not lead to problems. ... Whatever the details are, though, using spaces in filenames or paths is a bad practice which WILL lead to problems.
5. What concerns the image sizes, maybe later (I didn't understand your question correctly I fear). There is still my language barrier, I'm sorry.
Hans-Günter

PS3 (Playstation 3) issue not loading BDR Bluray | Adobe Encore CS6

Similar Messages

Maybe you are looking for