PS4 and 64 bit Win 7 on a laptop... What problems am I in for?

I'm a noobie to laptops, and I can't live without my Wacom tablet and pen. I'd appreciate knowing how detail drawings are done by PS 4 or other users with this OS and what problems 64 bit will create with this software.
Some laptop questions too: I noticed a response somewhere to use 32 bit in Win 7, and I didn't know you had a choice. True?
Are there some laptops that have both battery and wall plug availability?
Can I still use my tablet and pen via a usb port?
I'm very worried about this software update and I'd appreciate knowing what problems changing from a good PC to a laptop I'll have to deal with. Thanks so much..MM

Photoshop installs both 32-bit and 64-bit versions. On Vista, and I assume Win7, the 64-bit is intalled in the "Program Files" directory, and the 32-bit in the "Program Files (x86)" directory. The two versions look indentical in use, but many legacy plug-ins will not work in the 64-bit version. Be sure to set your desktop shortcuts and file associations to the one you use most often.
Laptops have various battery run time capacities. I used to have a Toshiba that had a big, beautiful 17" screen, but it was large, heavy, ran very warm, and gave me less than one hour on a charge. I replaced it with anAcer Timeline model that gives me over seven hours per charge. It is very lightweight and portable, but the downside is that the thin 13" screen has an extremely narrow angle of view. It does have video and HDMI out, though, so I can use a regular monitor or HDTV, so it's not that big a deal. I really like that I can carry it in a bag without dislocating my shoulder .
I'm using a Wacom Intuous with it with no issues.

Similar Messages

HT4914 I purchased iMatch because my old computer was failing and I was afraid of losing my music library. Now I bought a new laptop; what is the best way for me to transfer my library to my new laptop? Will iMatch help me do this?

I purchased iMatch because my old computer was failing and I was afraid of losing my music library. Now I bought a new laptop; what is the best way for me to transfer my library to my new laptop? Will iMatch help me do this?

Is/was failing or has failed?
If the old computer still runs one of these methods may be best.
Method 1
Backup the library with this User Tip.
Restore the backup to your new computer using the same tool used to back it up.
Deauthorize the old computer if you no longer want to access protected content on it.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
I'd recommend method 1 since it establishes an ongoing backup for your library.
I don't have personal experience with iTunes Match, but in principle you should be able to download all the tracks currently registered to your iTunes Match account. This isn't quite the same as restoring your previous library exactly as it was. There is always the potential for iTunes match to provide the wrong version of a song and could be content such as movies, podcasts, audiobooks etc. that would have been excluded.
tt2

Hi ERROR U41M1C212 for Update Elements 9 and PS CS5. Any Idea what it is? Thanks for Help.

hi ERROR U41M1C212 for Update Elements 9 and PS CS5. Any Idea what it is? Thanks for Help.

If you look at the bottom/right of this screen you have a list of links in 'More information like this'.
Have a look at them.

64-bit Win 7 SCANNER software does not install successfully for wired-networked HP Officejet L7750

My client has an Officejet L7750 on his network (in the same 192.168.111.nn subnet), and it functions OK as a printer. I downloaded and installed each of the three sets of L7750 software designated as working with 64-bit Windows:
HP Officejet Pro Basic Print and Scan Driver
HP Officejet Pro Full Feature Software and Driver
HP Officejet Basic Driver - IT Professional Use Only
The end-result is the same with each. The software runs for a time, finds the printer, continues the install, then runs for about 10 minutes "configuring the printer". After a time, it displays a dialog box saying that the installation failed. Sure enough, there is no software to run the scanner, but the printer still works. (I also ran the install a couple of times and the printer could not be found. When I continued installation anyway, the software left an icon on the desktop with some pretty unhelpful info for troubleshooting.)
After each failed install, I followed HP's documented procedure to remove the incomplete software.
My client needs to use the printer's scanning function, and occasionally send faxes, but cannot do so without a working L7750. Of course, Windows 7 cannot even recognize a networked scanner. Suggestions? Do I have to move the printer to the USB port on one of the computers to have a working scanning function? To do so would be mighty inconvenient, and essentially negate the networked capability of the printer. Can the L7750 operate simultaneously as both a netwkred device and a USB device on a computer?
Thank you. This one has me really stumped... Ben

Hey @RobAhl,
Welcome to the HP Support Forums!
I understand that you're not able to scan properly with Windows 7 64 bit. As you already know, while the Windows scan and Fax program is handy for basic scans, it is not practical if you need to scan PDF Files. I would be more than happy to assist you with your issue; however, I'm going to need a bit more information first.
What colour Laserjet is this in regards to?
How is the Laserjet connected to your computer?
In the meantime, on the HP Support Website there are Full Feature Software and Driver downloads available. Should your Laserjet have Windows 7 64 bit support than you should be able to go to the HP website and download the appropriate drivers as they are required in order to have full scan functionality.
Drivers & Downloads
Please let me know what you find out. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HT203180 I downloaded a tv series to my laptop and it plays on the laptop no problem, but won't play on my iPad. The sync process seemed to sync it and the settings section on the iPad suggests the series was there, but there's no icon to select on under

All other tv series that I have purchased via iTunes sync to my iPad no problem. This one for some reason 'seems' to sync properly (according to the iTunes sync progress bar) and is listed for a short time in the video section under 'settings', but the series icon doesn't appear under 'videos' from the main screen to actually play it. Then it disappears from the settings section too. I have tried to redownload direct to the iPad from the 'purchased items' on iTunes but the same problem still occurs? The series plays fine on my laptop. Any ideas?!

Hi Rob,
Thanks for visiting Apple Support Communities.
The steps in this article can help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Best Regards,
Jeremy

FCP 7 and FCP-X on same partition: what problems are caused?

I'm trying to figure out if the performance issues I'm having with FCP-X can be remedied, or if the problem is just buggy software. Apparently, even a newer, faster, more powerful Mac is not the answer, as I read complaints from people with new, suped-up Mac Pros who say the software slows to a crawl. Sounds familiar to me, but I'm on iMacs and a MacBook Pro -- all my Macs are 3-4 years old, and are from that Core 2 Duo era, not Quad Core processors. All my Macs are maxed out at 4 GB or RAM. So I'm certain new machines are in my future. But judging from what some people say about their newer, faster machines, I'm not entirely convinced that it would solve the problem I'm having with FCP-X.
There are numerous threads here reporting sluggish performance (perpetual spinning beach balls) relating to a memory leak or a problem relating to FCP-X's usage of memory (some say it happens worse in Lion). Is that the problem? And if it is, why hasn't Apple addressed it?
Then there is this matter of having FCP-7 (FCP Studio) and FCP-X installed on the same partition. Apple's "Best Practices" article clearly states that it's best to have the two applications installed on separate partitions. Only problem (for me) is, I already had FCP-7 installed on the primary partition. When I purchased FCP-X (the day it first became available), I hadn't read that article, so naturally, the software got installed...you guessed it...on the primary partition. And yes, I could uninstall FCP-7 (FCP Studio), create a new partition, and then re-install it. But I remember how long it took to install FCP Studio (about 4 hours, as I recall), so I've put off the ordeal of heading down that road.
So I'm wondering.......
What problems are known to occur as a result of having FCP-7 and FCP-X installed on the same partition? Would my sluggish performance be related to this? Or would going to the trouble of uninstalling FCP-7, re-partitioning, then re-installing FCP-7 (FCP Studio) into its own play space, only be a waste of time?
What evidence is there that this co-install is the culprit causing sluggish performance?
What ARE the problems that the co-install causes? I've never heard anyone address this specifically.

When FCP X first came out, Apple recommended keeping FCS 3 on a separate partition, so I did that.
Recently I did a clean reinstall or Lion and installed FCS 3 as normal, followed by FCP X 10.0.3.
During the FCP X install, FCP 7 was moved to a new folder called Final Cut Studio.
'Studio' and FCP X now work happily on the same partition - but I have not tried opening both at the same time!
Just now, both applications are the most stable they have ever been.
These are my standard tips for improving performance:
First, check the spec of your iMac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Particularly your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
Other ways to improve performance:
Keep projects to 20 mins or less. If you have a long project, work on 20 min sections then paste these into a final project for export.
Create Optimised media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
Hide Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power.
Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot.
Move your Projects and Events to an external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
Contrary to what Ian said above, the biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
Andy

Just got refurb Macbook - what problems to look out for?

Hello all! Boy i am chuffed to have this little beauty before me... but i have this niggling feeling... its a refurb and it might 'have issues'.
What are the problems we know about? And how do i check it hasn't got 'em?
Its a 2.16 Dual Core 2 Duo, Super Drive, 120GB HD, 1GB of Apple RAM
I don't mind cracking it open and extracting serial numbers from funny places etc.
Respect
Matt

Technically you are correct, but if you do any visible damage to anything while opening it Apple could decide that an unauthorized repair or modification was attempted and deny warranty coverage. Most people don't have the proper tools or knowledge to disassemble a MacBook without leaving evidence it was opened.
When I used to do warranty repairs for another major electronics firm not Apple, we always inspected the heads of the screws in the case. If they were damaged in any way it had probably been opened by the customer. When we replaced any parts we replaced all the screws with new ones so after we got through you wouldn't know it had ever been opened.
I reprimanded one of my techs because he didn't use new screws and you could see they were had some damage. Our quality control was strict.
I just don't think it is worth it to take the chance of losing your warranty by opening the case.

Ipod disabled and isnt recognized on my laptop what do i do? Any answers please help ASAP!!

help

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

As i was using my iphone, it suddenly turned off and it wont come back on. what is the best solution for my problem?

As i was using my iPhone, it suddenly shut off without being shut off by anyone.i tried to turn my iPhone back on several times and nothing has worked. what could be the problem?

Does it, instead of powering up, show a little battery icon almost empty and a plug icon next to it? In that case it needs recharging to have enough power to start up again. Even if it doesn't, try connecting it to a power source and see what happens. If it doesn't respond there you may need to bring it in for repair.
-bb

I have a new mac pro notebook and wish to transfer microsoft money from my PC, can this be done and how is it done? What is the equivalent app for a mac for micro money? Thanks

I have a macbook pro notebook and wish to transfer my microsoft money from my PC to the Mac.
Can it be done?
If so how?
What is the equivilant app to microsoftmoney on a mac?
Thanks
Brian marks

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

Migrate I Tunes and I phone from work laptop to new Mac I bought for home

I've purchased a new Mac and I want to migrate all of my I tunes to the new computer from my work laptop (PC- XP) to the Mac. I also want to then sync the I Phone with the Mac rather than the laptop (currently the laptop is "home" for the I Phone). How do I do this without losing any of my songs- some of which were purchased and some of which were uploaded from CD? Also, can I re-home my I Phone to the Mac without losing all of my phone numbers, addresses, etc?
thanks!

The Apple Store will do this for you or you can call Apple Support and they will help.

Source patching and track targeting, What is it mainly used for?

Im reading adobe premier pro cc in a classroom book, and I still dont understand what source track and target track mean, or atleast what they are mainly used for.
Why do people use it?
In what work scenario is it mainly used in?

ShooterNZ is right as far as Source Patching. It's intended chiefly for controlling which track(s) a clip lands on when inserted via shortcut, although it also affects behavior when dragging content to the timelines.
Track targetting controls the Timeline's behavior for a variety of editing and selection actions. For example, the shortcut D selects one or more clips at the playhead. Try parking the playhead over two or more clips stacked in the Timeline, then target various combinations of tracks and see what happens when you press "D."

What are the best practices for the RCU's schemas

Hi,
I was wondering if there is some best practices about the RCU's schemas created with BIEE.
I already have discoverer (and application server), so I have a metadata repository for the Application Server. I will upgrade Discoverer 10g to 11, so I will create new schema with RCU in my metada repository (MR) of the Application Server. I'm wondering if I can put the BIEE's RCU schemas in the same database.
Basically,
1. is there a standard for the PREFIX ?
2. If I have multiple components of Fusion in the same Database, I will have multiples PREFIX_MDS schema ? Can they have the same PREFIX ? Or They all need to have a different prefix ?
For exemple: DISCO_MDS and BIEE_MDS or I can have DEV_MDS and this schema is valid for both Discoverer and BIEE.
Thank you !

What are the best practices for exception handling in n-tier applications?
The application is a fat client based on MVVM pattern with
.NET framework.
That would be to catch all exceptions at a single point in the n-tier solution, log it and create user friendly messages displayed to the user.

What's the maximal speed for E4200 l2tp protocol?

And the ppoe ,pptp and dhcp ?
i couldn't find data for it

Maximum Speed for any kind of a connection, let it be L2TP, PPPoE or DHCP, it all depends on kind of connection you have from the provider and obviously on the network that we are connected to.....
Your question is not self explanatory, try and put in some details about what exactly you are looking for....

I am thinking of getting the iphone 4s 16 g. I am currently using a hp laptop pc running vista 32 bit. My questions is: what calender do I use on my PC that will sync with the calenders on My IPHONE and my 16 gb IPAD. I do not have microsoft outlook

I have a IPHONE 4s 16 gb. I use a HP notebook PC running Vista 32 bit. My question is: What calender do I use on my PC that will sync easity with the IPHONE and the original IPAD 16 gb. I do not have outlook express.

Have a look at this article: Syncing contacts and calendars to iPod with iTunes for Windows Vista or Windows 7
iTunes has the ability to sync1 your contacts and calendars from Microsoft Outlook, and Windows Contacts (formerly Microsoft Address Book) to any iPod with a display screen.
The maximum supported number of contacts varies by iPod model.
Note: iTunes can sync vCards (.vcf) or Windows Contact (.contact) files, but only from one program at a time. If you sync from Outlook and then Windows Contact, your previous contacts will be overwritten. Outlook 2003 or later is required to sync contacts and calendars from Outlook. Windows 7 does not include Windows Contacts; Windows Contacts can be downloaded as part of Windows Live Essentials.
This article discusses how to sync contacts and calendars to iPod on Windows Vista. To learn how to sync contacts and calendars from Windows XP / 2000, go here.

PS4 and 64 bit Win 7 on a laptop... What problems am I in for?

Similar Messages

Maybe you are looking for