PSA Data Deletion in SAP BW running on Oracle

Hi,
I deleted 2 failed requests (10000000 Records) from PSA Tables because of the disk space issue for our BW System.
RSA1PSA DELETE PSA DATA
The requests are deleted from the PSA, In BW in can see that there not requests in that particular PSA.
But Basis/Database team raised an issue that the data has been added to the Database
What is this mean and how can I proceed with this
Thanks

This is probably not an Oracle issue.
refer to your other topic at PSA Data Deletion in SAP BW running on Oracle

Similar Messages

PSA data deletions

There are scheduled loads to a data target via a meta chain.
I want to include deletion of PSA data as part of the scheduled loads. Just wanted to check the following:
1. There are Process chain process to delete PSA tables
2. It is better to collectively delete the PSA tables
3. Should I include the PSA deletion as the last step for each individual process chain or as a new process in the meta chain
Thanks

Hi,
If you put all PSA tables deletion in one process, then system will delete one by one PSA & process will take more time.
So group PSA tables like Master data PSA, transaction data PSA, PSA in between source system & BI , PSA tables with in BI etc....
Then do analysis on data volume on each PSA. If any table will recieve more volume, then better to keep it alone in single process type where as smaller ones can be grouped. Again it depends on your server work processors available, regular PC design & data volume.
Hope you might get an direction.
Regards,
Arun Thangaraj.

Master Data Deletion in SAP BW

Hi,
We are having HR Master Data in BW - 0EMPLOYEE. User has deleted some of the personel numbers in the source system (SAP HR system) as the contract of the employee was ended.
My problem here is that the Personnel numbers are still existing in SAP BW - 0EMPLOYEE master data. Eventhough when i am trying to delete these un wanted personel numbers in maintain masterdata screen, that are not allowing me to delete as they have used some other placess in Transaction data.
Can you please suggest me, how to delete this specific Master Data in SAP-BW?
Best regards,
Venkata Challapalli.

Hi,
Why do you want to delete ?
No need to delete any Master Data
If you want to really delete ,you can do one thing
Right click on Master data Info Object 0EMPLOYEE
select Delete master data
And reload Master data for employee with full load
if delta Initilize delta with data transfer
Regards
Hari

Data extraction into sap table from legacy oracle database

Hello All,
    I have a scenario where I have two different software systems (SAP and xyz systems), where a intermediate table will be created in between the two systems that is shared. Data will be updated by the xyz systems into this shared table. Now, my questions regarding this shared table.
   1) Can we write some program or something to get the data from shared table to update the SAP?
   2) If possible send me the suggestions
   3) Please also send me the sample code to get the data from the shared table
Thanks in advance,
SDN powered

this shared table should be compatiable to sap fields...write code to fetch data from this table and assign data to appropriate fields in SAP and insert the data into sap.
1. Push mechanism
Write a RFC on SAP side to insert entries into the table.
Call the RFC from xyz application passing the data you want to insert.
2. Pull mechanism
Write a ABAP Program, where you can somehow read the data of the xyz application and insert data into the table.
3. Flat file
Dump the data from xyz application into the file.
Write a ABAP program to read the file and update the table.

Oracle 11g Active Data Guard and SAP R3

Hi All,
I have a query regarding Oracle 11g Active Data Guard and SAP R3.
Does the Oracle 11g R1/R2 Active Data guard feature supported with SAP R3?
I appreciate your help to provide any link or document for the same.
Thanks,
Vihang

I have a query regarding Oracle 11g Active Data Guard and SAP R3.
Does the Oracle 11g R1/R2 Active Data guard feature supported with SAP R3?
I appreciate your help to provide any link or document for the same.
Oracle database 11g functionality certified by SAP, check below link
http://www.oracle.com/us/solutions/sap/oradb11g-article-upd-1-323074.pdf
http://www.oracle.com/technetwork/middleware/ias/downloads/osb-11gr1certmatrix.xls

How to delete all the PSA data in one go

Hello Guys,
I want to clear all the data from all the PSA tables at one shot, how can i do this??
I have tried following things:
1) I have gone to PSA root node and right click and then clicked on delete PSA data, but its showing me all the datasources and when i am executing that, it is deleting one by one(that i means i need to select individual datasource, which i do not want).
2) Above specified step runs RSPSADEL1 in background , so i doubt whether it deletes psa data only or complete Table?
3)I got the info from other posts that there is a fm which is RSATREE_PSA_DELETE_BATCH, but i need to make myself clear whether this fm deletes only data or complete Table?
I am using sap-bw 3.5.
Regards,
Dolly

Hi,
there is one easy way to delete data from PSA .You can create a process chain have one delete data from PSA step where you need to give PSA table name and request older than (no of days before which you want to delete data ).
Execute it and it will delete all the data before specified no of days .You can add multiple PSA tables here and can delete whole data in one go .
Regards,
Jaya

SAP-BW Oracle tablespace for ODS/PSA data

Hi Experts,
Could you please give some knowledge on the below " Releasing table space " issue:
We r on BW 3.5 with Data base system as ORACLE 9.2.0.8.0.
We've deleted all ODS/PSA data ( /BIC/B0000590000 - Transfer Structure Application 8ZSDDLITM ( Its an ODS ) and even after refreshing the DB02 statistic, it's still the same , Space is not getting released.
The partitioning is set up with the field PARTNO. But this field has only one value:
SQL> select partno, count(*) from sapr3."/BIC/B0000590000"
2 group by partno
3 having count(*) > 1000000;
0 67616209
SQL> select count(*) from sapr3."/BIC/B0000590000";
67616209
All the records have a value 0 for the partno field, so each record is placed in the same partition. In this way partitioning is useless.
So , Do the space can be regained by reorganization?...Will this reorganization effects anything?...
I have also found some notes on this : 565176 , 733371
Please suggest ...
Regards,
KANTH

Dear Oliver,
Thanks for response and sorry for the late reply.
I have checked our ODS/PSA DDIC table ( /BIC/B0000590000 ). It has huge number of records ( More than 6 million ) although i have already deleted the PSA data from BW administration.
I did the RSRV for consistancy check but there is no inconsistancy i found Between PSA Partitions and SAP Administration Information## .
I think i will approach BASIS on this but what should i exactly request them. I am afraid of any reorganization from there side will result in problems..
Thanks a lot..
Regards,
KANTH

How can i delete PSA data in BI 7.0

Hi all,
you know in BW 3.5, Modeling - PSA - right click in PSA - delete PSA data, you can program how often you want to delete de data of the PSA , Example: 2 Days or from some date or a selective data request, now in my client we are now in BI 7.0, i find the PSA but i can get to this option that i had in BW 3.5, can you help me to find it, step by step please,
Jorge Ayllon

Hi,
Pls Goto Datasource Tab in RSA1 - You can see PSA on the top click that you will have the PSA requests there click on it and delete.
IF you want , use a process chain just as an addition information:
You have a process type - Delete PSA request
Please go thro' the link below:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393236323035%7d
Regards
CSM Reddy

PSA data not getting deleted

Hello, I have an issue with the data in the PSA table not getting deleted. I went to the datasource manage screen and deleted all the PSA requests, but the data still remains in the PSA table. Do you know the reason and how to get rid of the PSA data from the table?
Thanks.

You may check if there isn't any inconsistency in the PSA. Happens sometimes.
There are a few reports to check and repair them, like:
- SAP_PSA_PARTNO_CORRECT
- RSAR_PSA_CLEANUP_DIRECTORY_MS (RSAR_PSA_CLEANUP_DIRECTORY_MS if your db is MSSQL)
Check the following SAP Notes and read them carefully:
[1150724 - Consolidated note on the check & repair reports for PSA.|https://websmp107.sap-ag.de/sap/support/notes/1150724]
[1051664 - Check and repair program BW7.x for Note 849857.|https://websmp107.sap-ag.de/sap/support/notes/1051664]
[1063105 - Program 'RSAR_PSA_CLEANUP_DIRECTORY /_MS'.|https://websmp107.sap-ag.de/sap/support/notes/1063105]

Insert /delete data from SAP Z table to Oracle table and opposite

Hi,
Can u help me write this FM from the SAP side?
So, I have two tables ZTABLE in SAP and Oracle table ORAC.
Let's put three columns in each of them, for example
TEL1
TEL2
ADRESS
NAME
where TEL field is primary from ZTABLE to ORAC...
(in FM there shoud be abap code for writing data in ZTABLE after we press some pushbutton made in sap screen painter..)
for example, when we write new record in ZTABLE
00
112233
Street 4
Name1
this data shoud be inserted in Oracle table ORAC.
when we write new record in Oracle table for example
01
445566
New Street
Name2
this data shoud be inserted in ZTABLE.
Field TEL1 can be only of two values 01 or 02, other combination is not valid...
I must have all data from Oracle table ORAC in ZTABLE and opposite.
It should be the same scenario for DELETE...
And this communication should be online between sap and table in oracle database...
Can u help me from sap side? and give idea how to configure on oracle side??
Thanks a lot,
Nihad

I dont know if we can directly connect to a oracle database ( wait for the answers from others on this )
but in XI we have the JDBC adaptor to insert and retrieve data.
so for the outbound from SAP the flow can be something like this (with XI in landscape):
1) You have a screen to maintain a new entry / delete an entry
2) On save , this record gets saved or deleted from the Ztable in SAP
3)) In the same screen you can call a proxy class-method (generated using SPROXY transaction ) to send the record to XI.
4) XI to format it and insert into the oracle table
Mathews

How to delete PSA Data from any Table

Pls specify the steps to delete PSA Data from any specific table.

You can delete the PSA requests manually one by one as specified in the previous posts.
You can also trigger the deletion of PSA periodically by using Process chain.
'Deletion of PSA request' is the process type that need to be used.
By this way you can delete all the PSA requests of the table, that are older than certain number of days.
you can also schedule the PSA deletion for more than one table at a time, by including the tables in the same Process chain.

Delete reduntant PSA data

Hi All,
For an Absence Quota Infocube, we are using pseudodelta mechanism. For automizing this process, we have built process chain. We have used the process type -Delete Overlapping requests, to delete reduntant data in the infocube.
This is a Time Management infocube, it fetches huge amount of data every week. So the PSA also gets bulky over a period of time. The PSA size should be controlled and this should be automatic.
Also, this datamodel has a ABAP routine at Infopackage level. The code logic fetches data of last year and the current month's data if the Calendarmonth of dataextraction is JAN, for all other months it fetches data of current and previous month data.
Due, to the above routine. We cannot use the process type -Delete PSA Request. If we use it, then the infoprovider will have only few months data.
Can you please suggest me a way to delete the PSA contents automatically and at the sametime should not loose any data
Regards,
Vasavi

1. If you are doing this in BI 7.0, write a routine at infopackage level.
Take 0REQUID and 0calday as two parameters. Put a check on request ID which is loaded on which date.
Suppose request ID 12345 is loaded on jan 30th and req ID 67890 is loaded on 3rd Feb.
Now as per your scenario, it should take data for current & previous month only. SO this code will chk for req ID along with the date. If date is greater than 2 (here if calday format is yyyymm, the it considers month older than two months)., it'll delete it.
Here it'll chk req iD 12345 and date as 201001, which is older than 2 months, it'll delete it.
Remember - you can delete data from PSA only request wise and not record by record.
2. If you are doing this in 3.5, then it is much simpler every end of the month, go to PSA , rt click > Deleet PSA Data> teher is an option- OLDER THAN..> put the last date from where you want to keep data till date.
I hope it'll help you.

Data Deletion from PSA Tables

Hi,
I deleted 2 failed requests (10000000 Records) from PSA Tables because of the disk space issue for our BW System.
RSA1PSA DELETE PSA DATA
The requests are deleted from the PSA, In BW in can see that there not requests in that particular PSA.
But Basis/Database team raised an issue that the data has been added to the Database
What is this mean and how can I proceed with this
Thanks

Hi,
Thanks for the info provided.
So according to the info provided the Deleting the request from the PSA marks as To be Deleted
When the last of all requests in one partition gets deleted, what do you mean by this.
There are 2 requests in our PSA,I deleted 2 of them and in BW when I go to PSA there I dont find any requests available in PSA.
But our basis team complained that some data has been added to data base
Thanks

Unable to change the data source of SAP system

Dear all,
We have install SAP netweaver EHP1 standalone java on oracle 10.2.0.5 on windows 2008 R2.
while installation i have given the central SLD system as solman,
By mistake i have deleted the system from SMSY.. now when i createed the system manually i am unable to change the data resource as SLD due to this i can start my SMD configuration
Request please let me know how to resolve this issue.
Thanks
Paresh

Hi Paresh,
You can proceed with deleting your SAP system from SMSY (along with connected technical content such as AS Java definition) and the run the LANDSCAPE FETCH through transaction SMSY_SETUP to have the correct definition of your SAP system in SMSY.
Following this, you could use the addon Landscape Verification (a new thing I learnt today!!!) to check the correctness of transaction SMSY. The following link details the Landscape verification 1.0 for SolMan:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e093b3ce-c034-2d10-01bc-b51f1691d3da?quicklink=index&overridelayout=true
Hope this helps sort out your issue.

How to clear PSA data in advance berfore upload data into PSA by process

Could someone tell me how to clear previous PSA data before upload data into PSA through process chain,tks

Hi,
Try
Deleting Requests from the PSA
http://help.sap.com/saphelp_nw04s/helpdata/en/b0/078f3b0e8d4762e10000000a11402f/frameset.htm
Hope this helps.
Thanks,
JituK

PSA Data Deletion in SAP BW running on Oracle

Similar Messages

Maybe you are looking for