PSA deleition variant issue for the BW data source 80CUST_SALEST

Hi all,
I am trying to create a PSA deletion variant for the datasource 80CUST_SALEST, It is a BW Export Datasource,
We are in BI EHP1 7.01 SP3, I am getting a error like "Object name 0CUST_SALEST after the prefix
start with ABC...XYZ". it is not allowing me to save the PSA variant.
I also had a similar type of issue when creation for 1_COPA Datasources which was resolved by the OSS 1309619.
Can you please suggest me or advice me of any OSS notes/remedies for this issue.

can't you create the variant referring to the infopackage instead of the psa table?
M.

Similar Messages

Records Missed in PSA from R/3 for BI Content Data Sources

Hi Friends,
                      I'm extracting the data for the data target "0CCA_C11" using the data sources 0CO_OM_CCA_9 & 0CO_OM_CCA_1, but for the data source 0CO_OM_CCA_1, it is showing 25000 records in R/3 while checking in RSA3 transaction, but it's picking only 1500 records upto PSA, since PSA table is two dimension table, all records should be picked into the PSA, but it's not picking,
what might be the problem in R/3, can anybody tell me the step by step analysis for finding the exact problem?
Your inputs will be appreciated,
Balaji Reddy,

Hi Pinaki,
                Thanx for your replay, Can PI and BW versions and support package levels cause these kind of problems that not getting complete from datasource to PSA?, as far as this datasource is concerned, these are no filters and selections being set,
            help me in this regard in finding out the exact solutions
Regards,
Balaji Reddy

Different Info Packages for the same data source.

Hi Team,
I have a question, which i asked before that but i ended up with different solution.
I want to load 02.2002 to till date into ODS. Data source is 0FI_AR_10.
My boss wants in this way .
1) one infopackage for 02.2002 to 02.2005 with init.
2) one infopack for 03.2005 to 07.2008 with init for the same datasource.
3) one info pack with no selection criteira.
What will be the result ?
My guess is, Once we do init for the time period 02.2002 to 02.2005 ,
the system with note the timepreiod for the Datasource.
When i try to do Init for the second, the system will say init already exits for the data source. And it will not allow me to do init for the second selection.
Correct me if i am wrong.
Regards,
-Sonti-

Your planned InfoPackages:
- 1) one infopackage for 02.2002 to 02.2005 with init.
- 2) one infopack for 03.2005 to 07.2008 with init for the same datasource.
- 3) one info pack with no selection criteira.
As the selection criteria of package 1) & 2) do not overlap, is it possible.
For package 3), you need to do it as delta update instead of initialisation. Package 3) with no selection criteria overlaps with package 1) & 2).
Refer to the Help Documentation, which explains this quite clearly.
Link: [Maintaining InfoPackage - Tab Page: Updating|http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
>For selection criteria that do not overlap, several initialization criteria are possible for initializing the delta process when scheduling InfoPackages for data from an SAP system. This gives you the option of loading the relevant data for the delta process, step by step into the Business Information Warehouse. For example, you can load the data into BI for cost center 1000 in the first step, and the data for cost center 2000 in the second step.
>A delta requested after several initializations, contains the super set of all the successful initial selections as a selection condition. This selection condition can then no longer be changed for the delta.
Hope this help.

How to set delta for the generic data source(FM)

Hi Guru,s.
we have created datasource with FM with using templet RSAX_BIW_GET_DATA_SIMPLE . we want to set up delta for that funtion module.plz send me any templet for delta setup.My mail ID is [email protected]
Regards.
hari

Hi,
Use the template RSVD_BW_GET_DELTA_DATA instead.
Or a little bit of coding can be done using the field L_S_SELECT in RSAX_BIW_GET_DATA_SIMPLE to get the Delta records. If your datasource has a timestamp field which can be used for delta settings in RSO2. The last delta timestamp is captured in the field L_S_SELECT.
Use this field as one of the selection criteria in your Select statement. This worked in our case and should be helpful if ur delta field is a Timestamp field.
Hope this helps...
Cheers,
Raj

[HELP] Error: "JDBC theme based FOI support is disabled for the given data"

Hi all,
I have already set up MapViewer version 10.1.3.3 on BISE1 10g OC4J server. I am current using JDK 1.6. I create a mvdemo/mvdemo user for demo data.
The MapViewer demo is running fine with some demo without CHART. But give this error with some maps that have CHART like: "Dynamic theme, BI data and Pie chart style", "Dynamic theme and dynamic Bar chart style". The error is:
----------ERROR------------
Cannot process the FOI response from MapViewer server. Server message is: <?xml version=\"1.0\" encoding=\"UTF-8\" ?> <oms_error> MAPVIEWER-06009: Error processing an FOI request.\nRoot cause:FOIServlet:MAPVIEWER-06016: JDBC theme based FOI support is disabled for the given data source. [mvdemo]</oms_error>.
----------END ERROR------
I searched many threads on this forum, some point me to have this allow_jdbc_theme_based_foi="true" in mapViewerConfig.xml and restart MapViewer.
<map_data_source name="mvdemo"
jdbc_host="localhost"
jdbc_sid="bise1db"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="mvdemo"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
/>
Error Images: [http://i264.photobucket.com/albums/ii176/necrombi/misc/jdbcerror.png|http://i264.photobucket.com/albums/ii176/necrombi/misc/jdbcerror.png]
I have this configuration, but no luck. Could anyone show me how to resolve this problem?
Rgds,
Dung Nguyen

Oop, i managed to have this prob resolved!
My prob may come from this I use both scott and mvdemo schema for keeping demo data (import demo data).
Steps i made to resolve my prob are:
1) Undeploy MapViewer from Application Server Control (http://localhost:9704/em in my case)
2) Drop user mvdemo
3) Download mapviewer kit from Oracle Fusion Middleware MapViewer & Map Builder Version 11.1.1.2
4) Deploy MapViewer again
5) Recreate mvdemo and import demo data
6) Run mcsdefinition.sql, mvdemo.sql with mvdemo user (granted dba already)
7) Edit mapViewerConfig.xml
<map_data_source name="mvdemo"
jdbc_host="dungnguyen-pc"
jdbc_sid="bise1db"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="!mvdemo"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
/>
Save & Restart MapViewer
And now, all demos run fine. Hope this helpful for who meet prob like my case.

CBO generating different plans for the same data in similar Environments

Hi All
I have been trying to compare an SQL from 2 different but similar environments build of the same hardware specs .The issue I am facing is environment A, the query executes in less than 2 minutes with plan mostly showing full table scans and hash join whereas in environment B(problematic), it times out after 2 hours with an error of unable to extend table space . The statistics are up to date in both environments for both tables and indexes . System parameters are exactly similar(default oracle for except for multiblock_read_count ).
Both Environment have same db parameter for db_file_multiblock_read_count(16), optimizer(refer below),hash_area_size (131072),pga_aggregate_target(1G),db_block_size(8192) etc . SREADTIM, MREADTIM, CPUSPEED, MBRC are all null in aux_stats in both environment because workload was never collected i believe.
Attached is details about the SQL with table stats, SQL and index stats my main concern is CBO generating different plans for the similar data and statistics and same hardware and software specs. Is there any thing else I should consider .I generally see environment B being very slow and always plans tend to nested loops and index scan whereas what we really need is a sensible FTS in many cases. One of the very surprising thing is METER_CONFIG_HEADER below which has just 80 blocks of data is being asked for index scan.
show parameter optimizer
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.4
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
**Environment**
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE     10.2.0.4.0     Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Note: : There are slight difference in the no of records in the attached sheet.However, I wanted to tell that i have tested with exact same data and was getting similar results but I couldn't retain the data untill collecting the details in the attachment
TEST1     COMPARE TABLE LEVE STATS used by CBO
ENVIRONMENT A
TABLE_NAME     NUM_ROWS     BLOCKS     LAST_ANALYZED
ASSET     3607425     167760     5/02/2013 22:11
METER_CONFIG_HEADER     3658     80     5/01/2013 0:07
METER_CONFIG_ITEM     32310     496     5/01/2013 0:07
NMI     1899024     33557     18/02/2013 10:55
REGISTER     4830153     101504     18/02/2013 9:57
SDP_LOGICAL_ASSET     1607456     19137     18/02/2013 15:48
SDP_LOGICAL_REGISTER     5110781     78691     18/02/2013 9:56
SERVICE_DELIVERY_POINT     1425890     42468     18/02/2013 13:54
ENVIRONMENT B
TABLE_NAME     NUM_ROWS     BLOCKS     LAST_ANALYZED
ASSET     4133939     198570     16/02/2013 10:02
METER_CONFIG_HEADER     3779     80     16/02/2013 10:55
METER_CONFIG_ITEM     33720     510     16/02/2013 10:55
NMI     1969000     33113     16/02/2013 10:58
REGISTER     5837874     120104     16/02/2013 11:05
SDP_LOGICAL_ASSET     1788152     22325     16/02/2013 11:06
SDP_LOGICAL_REGISTER     6101934     91088     16/02/2013 11:07
SERVICE_DELIVERY_POINT     1447589     43804     16/02/2013 11:11
TEST ITEM 2     COMPARE INDEX STATS used by CBO
ENVIRONMENT A
TABLE_NAME     INDEX_NAME     UNIQUENESS     BLEVEL     LEAF_BLOCKS     DISTINCT_KEYS     AVG_LEAF_BLOCKS_PER_KEY     AVG_DATA_BLOCKS_PER_KEY     CLUSTERING_FACTOR     NUM_ROWS
ASSET     IDX_AST_DEVICE_CATEGORY_SK     NONUNIQUE     2     9878     67     147     12982     869801     3553095
ASSET     IDX_A_SAPINTLOGDEV_SK     NONUNIQUE     2     7291     2747     2     639     1755977     3597916
ASSET     SYS_C00102592     UNIQUE     2     12488     3733831     1     1     3726639     3733831
METER_CONFIG_HEADER     SYS_C0092052     UNIQUE     1     12     3670     1     1     3590     3670
METER_CONFIG_ITEM     SYS_C0092074     UNIQUE     1     104     32310     1     1     32132     32310
NMI     IDX_NMI_ID     NONUNIQUE     2     6298     844853     1     2     1964769     1965029
NMI     IDX_NMI_ID_NK     NONUNIQUE     2     6701     1923072     1     1     1922831     1923084
NMI     IDX_NMI_STATS     NONUNIQUE     1     106     4     26     52     211     211
REGISTER     REG_EFFECTIVE_DTM     NONUNIQUE     2     12498     795     15     2899     2304831     4711808
REGISTER     SYS_C00102653     UNIQUE     2     16942     5065660     1     1     5056855     5065660
SDP_LOGICAL_ASSET     IDX_SLA_SAPINTLOGDEV_SK     NONUNIQUE     2     3667     1607968     1     1     1607689     1607982
SDP_LOGICAL_ASSET     IDX_SLA_SDP_SK     NONUNIQUE     2     3811     668727     1     2     1606204     1607982
SDP_LOGICAL_ASSET     SYS_C00102665     UNIQUE     2     5116     1529606     1     1     1528136     1529606
SDP_LOGICAL_REGISTER     SYS_C00102677     UNIQUE     2     17370     5193638     1     1     5193623     5193638
SERVICE_DELIVERY_POINT     IDX_SDP_NMI_SK     NONUNIQUE     2     4406     676523     1     2     1423247     1425890
SERVICE_DELIVERY_POINT     IDX_SDP_SAP_INT_NMI_SK     NONUNIQUE     2     7374     676523     1     2     1458238     1461108
SERVICE_DELIVERY_POINT     SYS_C00102687     UNIQUE     2     4737     1416207     1     1     1415022     1416207
ENVIRONMENT B
TABLE_NAME     INDEX_NAME     UNIQUENESS     BLEVEL     LEAF_BLOCKS     DISTINCT_KEYS     AVG_LEAF_BLOCKS_PER_KEY     AVG_DATA_BLOCKS_PER_KEY     CLUSTERING_FACTOR     NUM_ROWS
ASSET     IDX_AST_DEVICE_CATEGORY_SK     NONUNIQUE     2     8606     121     71     16428     1987833     4162257
ASSET     IDX_A_SAPINTLOGDEV_SK     NONUNIQUE     2     8432     1780146     1     1     2048170     4162257
ASSET     SYS_C00116157     UNIQUE     2     13597     4162263     1     1     4158759     4162263
METER_CONFIG_HEADER     SYS_C00116570     UNIQUE     1     12     3779     1     1     3734     3779
METER_CONFIG_ITEM     SYS_C00116592     UNIQUE     1     107     33720     1     1     33459     33720
NMI     IDX_NMI_ID     NONUNIQUE     2     6319     683370     1     2     1970460     1971313
NMI     IDX_NMI_ID_NK     NONUNIQUE     2     6597     1971293     1     1     1970771     1971313
NMI     IDX_NMI_STATS     NONUNIQUE     1     98     48     2     4     196     196
REGISTER     REG_EFFECTIVE_DTM     NONUNIQUE     2     15615     1273     12     2109     2685924     5886582
REGISTER     SYS_C00116748     UNIQUE     2     19533     5886582     1     1     5845565     5886582
SDP_LOGICAL_ASSET     IDX_SLA_SAPINTLOGDEV_SK     NONUNIQUE     2     4111     1795084     1     1     1758441     1795130
SDP_LOGICAL_ASSET     IDX_SLA_SDP_SK     NONUNIQUE     2     4003     674249     1     2     1787987     1795130
SDP_LOGICAL_ASSET     SYS_C004520     UNIQUE     2     5864     1795130     1     1     1782147     1795130
SDP_LOGICAL_REGISTER     SYS_C004539     UNIQUE     2     20413     6152850     1     1     6073059     6152850
SERVICE_DELIVERY_POINT     IDX_SDP_NMI_SK     NONUNIQUE     2     3227     660649     1     2     1422572     1447803
SERVICE_DELIVERY_POINT     IDX_SDP_SAP_INT_NMI_SK     NONUNIQUE     2     6399     646257     1     2     1346948     1349993
SERVICE_DELIVERY_POINT     SYS_C00128706     UNIQUE     2     4643     1447946     1     1     1442796     1447946
TEST ITEM 3     COMPARE PLANS
ENVIRONMENT A
Plan hash value: 4109575732
| Id | Operation                       | Name                   | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|   1 | HASH UNIQUE                    |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|* 2 |   HASH JOIN                     |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|* 3 |    HASH JOIN                    |                        |     6 |   900 |       |   135K (2)| 00:27:04 |
|* 4 |     HASH JOIN ANTI              |                        |     1 |   137 |       |   135K (2)| 00:27:03 |
|* 5 |      TABLE ACCESS BY INDEX ROWID| NMI                    |     1 |    22 |       |     5   (0)| 00:00:01 |
|   6 |       NESTED LOOPS              |                        |     1 |   131 |       | 95137   (2)| 00:19:02 |
|* 7 |        HASH JOIN                |                        |     1 |   109 |       | 95132   (2)| 00:19:02 |
|* 8 |         TABLE ACCESS FULL       | ASSET                  | 36074 | 1021K|       | 38553   (2)| 00:07:43 |
|* 9 |         HASH JOIN               |                        | 90361 | 7059K| 4040K| 56578   (2)| 00:11:19 |
|* 10 |          HASH JOIN              |                        | 52977 | 3414K| 2248K| 50654   (2)| 00:10:08 |
|* 11 |           HASH JOIN             |                        | 39674 | 1782K|       | 40101   (2)| 00:08:02 |
|* 12 |            TABLE ACCESS FULL    | REGISTER               | 39439 | 1232K|       | 22584   (2)| 00:04:32 |
|* 13 |            TABLE ACCESS FULL    | SDP_LOGICAL_REGISTER   | 4206K|    56M|       | 17490   (2)| 00:03:30 |
|* 14 |           TABLE ACCESS FULL     | SERVICE_DELIVERY_POINT |   675K|    12M|       | 9412   (2)| 00:01:53 |
|* 15 |          TABLE ACCESS FULL      | SDP_LOGICAL_ASSET      | 1178K|    15M|       | 4262   (2)| 00:00:52 |
|* 16 |        INDEX RANGE SCAN         | IDX_NMI_ID_NK          |     2 |       |       |     2   (0)| 00:00:01 |
| 17 |      VIEW                       |                        | 39674 |   232K|       | 40101   (2)| 00:08:02 |
|* 18 |       HASH JOIN                 |                        | 39674 | 1046K|       | 40101   (2)| 00:08:02 |
|* 19 |        TABLE ACCESS FULL        | REGISTER               | 39439 |   500K|       | 22584   (2)| 00:04:32 |
|* 20 |        TABLE ACCESS FULL        | SDP_LOGICAL_REGISTER   | 4206K|    56M|       | 17490   (2)| 00:03:30 |
|* 21 |     TABLE ACCESS FULL           | METER_CONFIG_HEADER    | 3658 | 47554 |       |    19   (0)| 00:00:01 |
|* 22 |    TABLE ACCESS FULL            | METER_CONFIG_ITEM      | 7590 | 68310 |       |   112   (2)| 00:00:02 |
Predicate Information (identified by operation id):
   2 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
   3 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
   4 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
   5 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
   7 - access("ASSET_CD"="EQUIP_CD" AND "SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
   8 - filter("ROW_CURRENT_IND"='Y')
   9 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
10 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
11 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
12 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='4' OR
              SUBSTR("REGISTER_ID_CD",1,1)='5' OR SUBSTR("REGISTER_ID_CD",1,1)='6') AND "ROW_CURRENT_IND"='Y')
13 - filter("ROW_CURRENT_IND"='Y')
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y')
16 - access("NMI_SK"="NMI_SK")
18 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
19 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='1' OR
              SUBSTR("REGISTER_ID_CD",1,1)='2' OR SUBSTR("REGISTER_ID_CD",1,1)='3') AND "ROW_CURRENT_IND"='Y')
20 - filter("ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
22 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
ENVIRONMENT B
Plan hash value: 2826260434
| Id | Operation                            | Name                   | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                     |                        |     1 |   181 |   103K (2)| 00:20:47 |
|   1 | HASH UNIQUE                         |                        |     1 |   181 |   103K (2)| 00:20:47 |
|* 2 |   HASH JOIN ANTI                     |                        |     1 |   181 |   103K (2)| 00:20:47 |
|* 3 |    HASH JOIN                         |                        |     1 |   176 | 56855   (2)| 00:11:23 |
|* 4 |     HASH JOIN                        |                        |     1 |   163 | 36577   (2)| 00:07:19 |
|* 5 |      TABLE ACCESS BY INDEX ROWID     | ASSET                  |     1 |    44 |     4   (0)| 00:00:01 |
|   6 |       NESTED LOOPS                   |                        |     1 |   131 | 9834   (2)| 00:01:59 |
|   7 |        NESTED LOOPS                  |                        |     1 |    87 | 9830   (2)| 00:01:58 |
|   8 |         NESTED LOOPS                 |                        |     1 |    74 | 9825   (2)| 00:01:58 |
|* 9 |          HASH JOIN                   |                        |     1 |    52 | 9820   (2)| 00:01:58 |
|* 10 |           TABLE ACCESS BY INDEX ROWID| METER_CONFIG_HEADER    |     1 |    14 |     1   (0)| 00:00:01 |
| 11 |            NESTED LOOPS              |                        |     1 |    33 |   116   (2)| 00:00:02 |
|* 12 |             TABLE ACCESS FULL        | METER_CONFIG_ITEM      |     1 |    19 |   115   (2)| 00:00:02 |
|* 13 |             INDEX RANGE SCAN         | SYS_C00116570          |     1 |       |     1   (0)| 00:00:01 |
|* 14 |           TABLE ACCESS FULL          | SERVICE_DELIVERY_POINT |   723K|    13M| 9699   (2)| 00:01:57 |
|* 15 |          TABLE ACCESS BY INDEX ROWID | NMI                    |     1 |    22 |     5   (0)| 00:00:01 |
|* 16 |           INDEX RANGE SCAN           | IDX_NMI_ID_NK          |     2 |       |     2   (0)| 00:00:01 |
|* 17 |         TABLE ACCESS BY INDEX ROWID | SDP_LOGICAL_ASSET      |     1 |    13 |     5   (0)| 00:00:01 |
|* 18 |          INDEX RANGE SCAN            | IDX_SLA_SDP_SK         |     2 |       |     2   (0)| 00:00:01 |
|* 19 |        INDEX RANGE SCAN              | IDX_A_SAPINTLOGDEV_SK |     2 |       |     2   (0)| 00:00:01 |
|* 20 |      TABLE ACCESS FULL               | REGISTER               | 76113 | 2378K| 26743   (2)| 00:05:21 |
|* 21 |     TABLE ACCESS FULL                | SDP_LOGICAL_REGISTER   | 5095K|    63M| 20245   (2)| 00:04:03 |
| 22 |    VIEW                              |                        | 90889 |   443K| 47021   (2)| 00:09:25 |
|* 23 |     HASH JOIN                        |                        | 90889 | 2307K| 47021   (2)| 00:09:25 |
|* 24 |      TABLE ACCESS FULL               | REGISTER               | 76113 |   966K| 26743   (2)| 00:05:21 |
|* 25 |      TABLE ACCESS FULL               | SDP_LOGICAL_REGISTER   | 5095K|    63M| 20245   (2)| 00:04:03 |
Predicate Information (identified by operation id):
   2 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
   3 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK" AND
              "SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
   4 - access("ASSET_CD"="EQUIP_CD")
   5 - filter("ROW_CURRENT_IND"='Y')
   9 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
10 - filter("ROW_CURRENT_IND"='Y')
12 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
13 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
16 - access("NMI_SK"="NMI_SK")
17 - filter("ROW_CURRENT_IND"='Y')
18 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
19 - access("SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
20 - filter((SUBSTR("REGISTER_ID_CD",1,1)='4' OR SUBSTR("REGISTER_ID_CD",1,1)='5' OR
              SUBSTR("REGISTER_ID_CD",1,1)='6') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
23 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
24 - filter((SUBSTR("REGISTER_ID_CD",1,1)='1' OR SUBSTR("REGISTER_ID_CD",1,1)='2' OR
              SUBSTR("REGISTER_ID_CD",1,1)='3') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
25 - filter("ROW_CURRENT_IND"='Y')Edited by: abhilash173 on Feb 24, 2013 9:16 PM
Edited by: abhilash173 on Feb 24, 2013 9:18 PM

Hi Paul,
I misread your question initially .The system stats are outdated in both ( same result as seen from aux_stats) .I am not a DBA and do not have access to gather system stats fresh.
select * from sys.aux_stats$
SNAME     PNAME     PVAL1     PVAL2
SYSSTATS_INFO     STATUS     NULL     COMPLETED
SYSSTATS_INFO     DSTART     NULL     02-16-2011 15:24
SYSSTATS_INFO     DSTOP     NULL     02-16-2011 15:24
SYSSTATS_INFO     FLAGS     1     NULL
SYSSTATS_MAIN     CPUSPEEDNW     1321.20523     NULL
SYSSTATS_MAIN     IOSEEKTIM     10     NULL
SYSSTATS_MAIN     IOTFRSPEED     4096     NULL
SYSSTATS_MAIN     SREADTIM     NULL     NULL
SYSSTATS_MAIN     MREADTIM     NULL     NULL
SYSSTATS_MAIN     CPUSPEED     NULL     NULL
SYSSTATS_MAIN     MBRC     NULL     NULL
SYSSTATS_MAIN     MAXTHR     NULL     NULL
SYSSTATS_MAIN     SLAVETHR     NULL     NULL

How to use Add Query Criteria for the MySQL data Base in Netbeans ?

How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
When the Query Criteria is add like
SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
FROM counselors WHERE counselors.counselors_id = ?
when i run this Query in the Query Window
i get a error message Box saying
Query Processing Error Parameter metadata not available for the given statement
if i run the Query with out Query Criteria its working fine.

*I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
The Java codes are:
public void dropDown1_processValueChange(ValueChangeEvent event) {
Object s = this.dropDown1.getSelected();
try {
this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
this.Trip_tabDataProvider1.refresh();
} catch (Exception e) {
this.log("Error: ", e);
this.error("Error: Cannot select user"+e.getMessage());
SQL statement for Trip_tabRowSet:
SELECT ALL Trip_Tab.Trip_Date,
Trip_Tab.User_ID,
Trip_Tab.Destination
FROM Trip_Tab
WHERE Trip_Tab.User_ID = ?
Error messages are shown below:
phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.sql.SQLException: No value specified for parameter 1
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
Could anybody look into this issue.
Many thanks
Edited by: linqing on Nov 22, 2007 4:48 AM

Reporting annoying issues for the entire Microsoft website (MSDN, forums, all)

Is there any place where I can report bugs with how the Microsoft web sites behave? I can only find forums and "Microsoft Answers" categories about single products that Microsoft makes, but nothing about the infrastructure itself.
For about two weeks now, I am required to log into my account every few hours whenever I access any Microsoft website. This includes MSDN help content, forums, or other resources. I need to login after opening the website through F1 help in Visual Studio
as well as accessing a microsoft.com link from anywhere else like a web search or a direct link from web or an application.
Auto-complete does not work either. My browser (Firefox) does save the password, but it never fills it into the form. Other people have already noticed that
Microsoft applies some dirty tricks here. And even if the login is remembers for a moment, it's slow as hell. It takes a second or two to load the login.live.com page (which is not what I wanted to see), then it sits there for some more seconds before going
anywhere. Other login services like Google or StackOverflow manage to log me in all within one second and most of the time I don't even see it.
And then there's still that insecure SSL-to-non-SSL-submit warning that only occurs in other browsers then IE. Has anybody cared about that in the last couple years?! I'm not getting it now, probably because I'm not logged in anymore. It all slowly falls
apart, piece by piece. Next step is probably losing my data or not loading it at all.
THIS – IS – ANNOYING! And it really makes me feel like I don't want to use Microsoft products anymore (because even good desktop applications are connected to that silly website). I have opened a
Microsoft Connect ticket for a part of this issue (it's grown bigger since then), but this ticket is totally ignored. If microsoft.com went down, they'd certainly care within minutes or hours. This bug is not even regarded in
weeks!
So do I have to write a postal letter to the president of the whole company or do they have support staff for that?! Do they have anybody who is capable of maintaining their website? It's really frustrating how Microsoft has a web presence that is worse
than what our first-year trainees come up with. It's full of bugs and this is currently only the most relevant one. Do they even care about how the world sees them? Or is Microsoft currently preparing (and even failing) to move out of business?

The brandings are fun. Here's this same thread in a bunch of flavors:
https://social.technet.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.msdn.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.technet.microsoft.com/Forums/sqlserver/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.msdn.microsoft.com/Forums/vstudio/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.technet.microsoft.com/Forums/exchange/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Events cannot have multiple exceptions for the same date

I just starting getting this message and could not sync to one of my Google calendars. I'm posting this for others who might get the same problem.
I didn't find the answer on these forums but did find it on this thread on Google:
http://www.google.com/support/forum/p/Calendar/thread?tid=241155f758d9e2a4&hl=en
Here's the important excerpt:
"I had a client, who just had this same issue, nothing to do with Google cals.
It was apparently, in my best guess, a corruption of the subscribed cal.
*I did a get info on the cal, copied the URL, deleted the cal, then re-subscribed to it by pasting in the URL, and now it's working fine*."

I've been having the same problem with my iCal calendars and the "Events cannot have multiple exceptions for the same date" error. Once it gets going, it uses up a lot of the CPU and resources. After reinstalling iCal, all my calendars were missing and I could not even resubscribe to them.
I took my MacBook Pro to the Apple Store, and they were able to solve the problem by moving some of the iCal files from their existing folders out to the desktop, and reopening the program. That got it working, however, now I'm having the same problem again. So back to square one. Anyone else having this issue and know the cause?
My setup is my MacBook Pro uses Entourage, use that calendar in my iCal. And I subscribe to two calendars my wife publishes on her Macbook. We're both using Snow Leopard.

Variant must get the current date from the system.

Hi All,
I really appreciate your help on below please;
I need to create a variant and schedule a report program once a day.
But variant must get the current date from the system (sy-datum).
The program should run for the values in the variant in schedule job run;
Can I do this using SAP variants (for Report Program) and schedule the job.
Many thanks
Iver

Standard functionality.
http://help.sap.com/saphelp_nw70/helpdata/en/c0/98039be58611d194cc00a0c94260a5/frameset.htm
Thomas

Issue for the past 2 hours. Cannot make or receive calls in Little Falls, NJ. Is there a problem with the local tower?

Issue for the past 2 hours. Cannot make or receive calls in Little Falls, NJ. Is there a problem with the local tower?

You haven't enabled VoLTE (Advanced calling) have you? Not that it makes a difference just curious.
Have you upgraded to Lollipop yet?
Could be hardware or SIM card issue, read through this thread:
I can't make or take phone calls, but i can message and use data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, two of which have this problem and one just stopped working all together.

Position 1000001 not available for the start date of the infotype record

Dear Experts/Gurus,
I am getting the following error message "Position 1000001 not available for the start date of the infotype record" while trying to upload employees HR Master data in PA40.
I know the reason why because the position is created on 01.05.2009 & employee DOJ is 01.02.2006 both are mismatch & the position date has to be changed earlier date than DOJ but i don't know how to do.
Please let me know how to sort out this issue asap.
Rgds,
Vikrant

Dear Friend,
Use PP02, select the position no, select infotype 1000 (Object), select planning status & validity(date) and then use the copy function to change the start date.
Regards,
Aks

Multiple MM schedule lines for the same date

Hello All Gurus,
I am facing a problem where the MM schedule lines are divided into various quantites for the same date. For example on 02/11/2010 the total quantity is 120, it is appearing in the below form in ME38:
02/11/2010 - 40
02/11/2010 - 40
02/11/2010 - 40
Although this is not an error, but my client is not happy with this. Can someone tell me why I am getting this error? Is it because of the rounding value that we maintain in MRP 1 view of material master record? Or is there any other setting that I am missing?
Please let me know. I would be very much thankful to you.
Thanks and Regards,
Umakanth

Hi,
Before changing the setup, note that sometimes it is beneficial to split one demand into multiple delivery schedules. Especially if the demand is bigger than equipment type (container/truck etc.). If you want to manage inbound transportation for such delivery schedules, it is much simpler to do this when each delivery schedule is not bigger than one equipment.
Regards,
Dominik Modrzejewski

Dependent master data for the Transaction data

Hi,
Wish u Happy New Year to All.
I use to schedule daily some 250 master data.Then i will run transaction data.Because of this the system performance is effecting.I want to know, where i can find dependent master data objects for the particular transaction data?
Thanks in Advance
Regards,
Siv

Dear Siva
In the Info Source Over View for the particular data target can shown dependent master data objects.
Regards
Saravanan.ar

Data Sources for the Master data of FI-CO,MM and SD from R3

Hi Gurus ,
Could you please tell me what are the main datasources of FI-CO,MM and SD needed from R/3 for the master data to be loaded in new implementation of BI .
Could you please guide me step by step .
thanks in advance ,
Pratham

Hi
It varies from Client and project. But the Most common SD & MM are from LO **** pit.
help.sap.com is the best source for this
Hope it helps

PSA deleition variant issue for the BW data source 80CUST_SALEST

Similar Messages

Maybe you are looking for