PSA DOUBT

Hi gurus
In one of my intereview there asked me where we can find psa data finally  that mean which table we can see ,(i said its in RSTSODSPART)  if i'm wrong plz do correct me ..
when i entered in se16 and given table name as RSTSOSDPART ,its given error like this
Table RSTSODSPART is not active in the Dictionary
can u plz guide exactely where we can see psa data
Regards
ram

Hi ,
Check out the below mentioned note:
https://www.sdn.sap.com/irj/sdn/thread?threadID=327368
https://www.sdn.sap.com/irj/sdn/thread?threadID=739827
hope this helps.....
Thanks,
Supriya

Similar Messages

  • How to delete all the PSA data in one go

    Hello Guys,
    I want to clear all the data from all the PSA tables at one shot, how can i do this??
    I have tried following things:
    1) I have gone to PSA root node and right click and then clicked on delete PSA data, but its showing me all the datasources and when i am executing that, it is deleting one by one(that i means i need to select individual datasource, which i do not want).
    2) Above specified step runs RSPSADEL1 in background , so i doubt whether it deletes psa data only or complete Table?
    3)I got the info from other posts that there is a fm which is RSATREE_PSA_DELETE_BATCH, but i need to make myself clear whether this fm deletes only data or complete Table?
    I am using sap-bw 3.5.
    Regards,
    Dolly

    Hi,
    there is one easy way to delete data from PSA .You can create a process chain have one delete data from PSA step where you need to give PSA table name and request older than (no of days before which you want to delete data ).
    Execute it and it will delete all the data before specified no of days .You can add multiple PSA tables here and can delete whole data in one go .
    Regards,
    Jaya

  • Error handling in process chain-doubts

    Hi ,
    I have some doubts in error handling of process chains.
    1) I have  aprocess load infopackeage and subsequent process is update fromPSA.
    process load infopackage got failed  , so i loaded  the IP manually and repeated the next i.e process update from PSA .
    How to correct the process chain from now?
    2) I have  aprocess load infopackeage and subsequent process is Delete request in infocube .process load infopackage got failed  , so i loaded  the IP manually and repeated the next process i.e Delete request in infocube. Chain continued by deleting the right request . How this is possible ?
    Plz  help me  as this is urgent and daily i have to deal with this  issues. If any documents on error handling is greatly appreciated.
    My mail id is [email protected]
    Regards,
    Pavan

    Hi Pavan,
    Hope the following links will give u a clear idea about process chains and clear ur doubts.
    Business Intelligence Old Forum (Read Only Archive)
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
    /people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
    Errors in monitoring of process chains can be categorized into 4 different sections...
    Master data - Full Update
    Master data - Delta Update
    Transaction data - Full Update
    Transaction data - Delta Update.. in terms of loading of data which can be due to server shut down or system maintenance... errors due to incorrect entries in the OLTP system in which case you'll have to fix the errors in the PSA and manually load the data...
    Otherwise it can have errors on Attribute change run being locked by some other job... Aggregate Roll up failing because of attribute change run being run at the same time... Problem with hierarchies and save hierarchies...
    There can be problems with the data store activation if the ODS object contains any incorrect request sitting inside it... then, you need to delete the incorrect request and reload the data again...
    In case of Transaction Delta failure, you'll have to request for a repeat either manually in the infopackage or using the repeat option if available on right clicking the load event...
    For Master Data Delta failures, you need to do an Re-init by deleteing the previous initalization condition in the "initalization option for source systems" in the menu scheduler or reschedule the enitre chain... because, master data generally do not support repeat of last delta ...
    U can even look into these links:
    /people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
    For common data load errors check this link:
    /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
    ****Assign Points if Helpful****
    Regards,
    Ravikanth.

  • Error in process chain (psa data)

    We have got an error in our PROCESS chain for master data.
    Info object Name : 0customer
    In that it was showing  there was error in our request. When I wanted to correct data in the request there it was showing no error records. All the records are good  and  also it is showing as error in request. I have deleted the request from infoobject and also from the PSA. And the last updated good request is also showing error as No data packets available for the request .
    0Customer is delta update ; Process chain is daily based.
    My doubt is whether the records in the deleted requests will be reloaded again from sap R/3 into PSA, as requests during Process chain or not.
    While monitoring the request details in Monitor u2013 Administrator Work bench, it shows the following:
    1.     Requests (messages) Everything Ok
    2.     Extraction (messages) Missing messages
    3.     Transfer (IDocs and TRFC) Missing messages
    4.     Processing (data Packet) No data
    5.     Process chains : Everything Ok.
    Even after deleting the requests my process chain is not getting updated.
    Kindly help me in solving the above problem
    Regards
    Padma

    Hi,
    Once deleted the request, try to manually trigger the load and see whether it completes. if it completes and pulls reocrd then you can push the chain process ahead with the program RSPC_PROCESS_FINISH
    Regds,
    Shashank

  • Source system in PSA deletion variant

    Dear Experts
    In process chain PSA deletion variant,in source system column I will give the Development source system name(C6D),and after transport to the Quality styem(C6Q) Should I change this source system manually in qualtiy or system automatically will pick up the corresponding source system name?If not,what is the possible solution since we dont have any access in quality system.
    Cheers
    Rajesh

    Thanks for the reply.I got doubt because in DEV we have to enter manually both DS  and SOURCE SYSTEM manually...after importing to Quality will it change the source system name?...Can i take for grant...Pls confirm....
    Rajesh

  • R/3 To PSA

    Hii All,
    I have a strange problem,hope someone will help me out from this.
    I have a generic data source generated by using a Z table.
    At BW i have a Z infocube using that data source.
    I had a process chain that pulls the data daily as a full load.
    yesterday i changed it to INIT and Delta load.
    Now my problem is that the data coming on R/3 side is matched with tha data coming in table but when i pull it in PSA it misses some records.It happens since i pulled the data load using delta process chain..
    So please let me know that can i pull the data on the basis of creation date (in PSA)?
    Also please guide me what steps should i follow for this?
    One more question,i know it must be a kid kind question but i have some doubt in it thats why i m asking.My question is that how does a PSA extract the DELTA DATA after the init load?How does the PSA get to know that now the delta records have to be extracted???/
    Regards
    Neha..

    Hi,
    In infopackage there are two options - 1. init with data transfer
                                                            2. Init without data transfer
    Initially you did full load, you are right. Next you need to do int & after that delta.
    If you will select delta initialisation & init without data transfer- it means delta queue is initialised now & next time when you will do delta load it will pick changed records
    If you will select delta initialisation & init with data transfer- It means delta queue is initialised & it will pick records in the same load.
    changed data comes from delta queue-> PSA-> your targets

  • Doubts in BW implementation

    Hi Friends,
    I have some doubts in BW, pls clarify them.
    1) How PSA can be partitioned?
    2) What is line item dimension, how is implemented, what are the restrictions on it?
    3) What is the role of Report Agent?
    4) What is Fiscal Year Period?
    5) Features of 3.1C over 3.0B
    Pls mail the answers to my mailid [email protected]
    Thank You
    Have a nice day
    Kiran

    Hi Sai Krishna
    Do send me a copy of it at [email protected]
    Thanks in advance.
    Chakri..

  • Mass update from PSA to ODS in 3.5

    Hello friends,
    I am having nearly 100requests pending to load from PSA to ODS.
    I am doing manually one by one from RSMO.
    Is there is any way to do it in mass or automatically..
    Thanks
    Tony

    If you are in BI, possible.
    Updating multiple PSA requests one at a time
    I doubt if it is available in 3.5.

  • Master data attribute not updaing from PSA

    Hi all,
        I am on 3.5, and the have a custom attribute extension to the 0CUSTOMER object.  This attribute is populated in R/3, and populated in the PSA, but not the object itself, or the master data table of the object (/bi0/pcustomer).  Has anyone seen this before, or can anyone recommend how to trouble-shoot this?
       Thanks.
    Dave

    Hello David,
    Please follow as Sudharshan and Dennis suggested, along with that
    1. Check which type of attribute (time-dependent/time independent).
    2. Then search accordingly in the table p/q table of customer InfoObject.
    3. Try to search in m table of custome (/BI0/MCUSTOMER).
    Attribute change run for the particular master data is must to see the data in tables.
    4. Just check the Infopackage settings whether the load is till PSA or which option is selected(just to make sure whether the data is loaded till master data tables)- My doubt is the data might be till PSA and not yet processed from PSA to InfoObject, and you are searching the data in master data tables ;-).
    Please let us know your findings.
    Thanks,
    Umashankar

  • Truncate TABLE PSA table-index part

    Dear all,
    I have a doubt about the truncate action on BW of PSA table.
    To speed the activity and empty some tablespace I have truncated for example the PSA /BIC/B0000025000 and all table and index parts have emptied, so, on the contrary of disk space, the table part and index part from 00001 to 00050 for example are no longer used and the next uploads creates partition 00051.
    The question is: I must drop all index and table part previously emptied?
    If yes a must keep in mind some indications?
    I could have some problem to leave this table and index part empty, for example about performance or inconsistence?
    There is some contraindication to truncate PSA?
    Can i use program 'RSAR_CLEANUP_PSA_DIRECTORY' to delete its?
    Thanks for your help.
    Best Regards
    Daniele

    Hi Kaushal,
    thanks for your answer.
    I have executed program mentioned in oss note 733371.
    After the execution of RSAR_PSA_CLEANUP_DIRECTORY
    some errors have found:
    in the head of log there are this two entries:
    Fatal error occured, DO NOT USE correct option
    For errors 'wrongly present in partition' refer to NOTE 849857 / 992248
    the rest of log this kind of errors:
    Request : ODSR_47KKTL3NMVNZPGY17C4POEYAV  missed in partition  0015
    The oss note 849857 is for release lower of mine, the note 992248 is for my release, its talks about a program 'SAP_PSA_ZEROCORRECT' imported automatically with SP 11, i have level 13 os SP BI but i didn't find that program,
    do you have some idea about that?
    After execution of report RSAR_PSA_CLEANUP_DEFINITION (only check)
    I have this error:
    No DDIC Table Exists for PSA: ZEDS_NOT_T_BA Vrs. 000
    There Is No Active DDIC Table: /BIC/B0000852000
    Do you think that if i run RSAR_PSA_CLEANUP_DEFINITION  with repair object i can resolve all my problem visualized for report RSAR_PSA_CLEANUP_DIRECTORY either? Or before in must execute RSAR_PSA_CLEANUP_DIRECTORY whit repair option?
    Thanks for your help
    Ciao

  • Process Chain Flow doubt

    Hi,
    There is a process chain of flow start>Infopackage>DTP>ActivateDSO_->InfoPackage1>DTP1>ActivateDSO1_
    Only doubt starts where it is underlined. why the infopackage1 has been linked after the Activate DSO eventhough no dependency for DSO1?
    Instead the infopackage1 can be linked after start variant of the same process chain, right?
    regards,
    Draj S

    hi,
    please checkout the below link it may help you
    http://help.sap.com/saphelp_nw70/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
    DataFlow of Process Chains in different SAP BW-BI
    Steps for Process Chains in BI 7.0 for a Cube.
    1. Start
    2. Execute Infopackage
    3. Delete Indexes for Cube
    4.Execute DTP
    5. Create Indexes for Cube
    For DSO
    1. Start
    2. Execute Infopackage
    3. Execute DTP
    5. Activate DSO
    For an IO
    1. Start
    2.Execute infopackage
    3.Execute DTP
    4.Attribute Change Run
    Data to Cube thru a DSO
    1. Start
    2. Execute Infopackage ( loads till psa )
    3.Execute DTP ( to load DSO from PSA )
    4.Activate DSO
    5.Further Processing
    6.Delete Indexes for Cube
    7.Execute DTP ( to load Cube from DSO )
    8.Create Indexes for Cube
    Thakns,
    Neelam

  • Basic Doubts

    Hello Experts,
    Please any one of them clarify my some of the Basic doubts
    1.Reg ODS activation failure in Process chain,I know how to correct incase if ods activation failed.I want to know,What could be the reason for failure and in background whats happening(Techincally)
    2.Reg Attribute change run failure in process chain,what could be the reason.(technically)
    3.Whats is the purpose of trfc and what we have to check in SM58.
    4.What is the diff between the IDOC(transfer method) and Idoc which is used to transfer the data in PSA transfer method..(For ex - If i am using the PSA transfer method,even there to transfer the datapackets,we are using Idoc)
    5.Some of the time,I am getting the error like this"Non updated idoc in source system and error mesg from the source system/Business warehouse.
    This mean,what could be the reason.(Frequently i am getting the above errors and If i used the repeat option,It has been corrected and loaded succesfully)
    6.How many datasources can be assigned to one Infosource(Is any limit is there)
    I request you to advise on the above doubts and I will assign the points.
    Thanks in advance
    Regards
    Kumar

    Hi,
    1. During the month end procedures and week ends the number of records will be more rather than the week days, so the data packages defined will run for long time, so we will be getting Time out error, we have to manually activate the data packages.
    2. if you r not using Attribute change run, then your Master data(text, attribute, hierarchy wont get activated when you run a process chain)
    .so it is mandatory that once you fill the master data u have to activate those, for that we need Attribute change run.
    3. tRFC calls which transfer IDocs use the function module IDOC_INBOUND_ASYNCHRONOUS at reception If an IDoc in the sending system has been passed to tRFC (IDoc status "03"), but has not yet been input in the receiving system, this means that the tRFC call has not yet been executed.
    In the standard SAP system, if tRFC errors occur, a background job is generated to re-establish the connection. In certain circumstances this could result in a large number of background jobs being started that completely block background processing. To cancel a background job if tRFC errors occur use program RSARFCEX to restart tRFC.we go for SM59 transaction for this.
    Choose Destination ® tRFC Options and select the option Suppress Background Job at Comm. Error. 
    4. PSA :
    The data is sent directly from the source system to the BW and it  is stored in the PSA (Persistent Staging Area), we can update  automatically/manually to corresponding Info providers .The transfer type here is called the TRF (Transactional Remote Function).
    IDOC :
    The data is packed into IDocs by the source system and sent to the Business Information Warehouse. In BW the data is saved persistently and intransparently in the IDoc store. we have some prerequisite here to use this method ,Transfer  transfer structure must not have more than 1000 Bytes in the character format.
    6. One datasource can be assigned to one info source.

  • Request data again from delta queue to PSA , but error

    Hi,expert
    I extract 1 record from delta queue to PSA,it is success, and then I set request to 'Red' in the PSA monitor, and delete that request,and start infopackage again ,
    then 1 delta record was loaded, so, it is success.
    but,
    when I repeat the upon operate(set request to 'red',and request data again), the system then alert below error:
    Last delta update is not yet completed Therefore,
    no new delta update is possible You can start the request again if the last delta request is red or green in the monitor (QM activity)
    why?
    Edited by: xuehui li on Apr 27, 2010 1:44 PM

    Hi ,
    If your last delta was red only then system will ask to repeat the same request it is called Repeat Delta,
    if you make your request Green then you won't get the message because this then assume that your last delta was successful ,
    But if you don't want to loose your data in DELTA process, then you must do Repeat Delta ,
    if you have very less data in your ODS and you are not sure about what is updated then
    you may delete all the data from ODS and delete the INIT request and initialise the load again.
    Let me know if you have any doubt,
    Cheers,
    Sukhi

  • PSA SE 3 fails to reload in same computer session!!!

    hey everyone ... or those interested enuf to visit this thread :)
    i have an issue:
    if in the same computer session, i open this app then close it [ctrl-k, exit or X], it fails to reload a 2nd time [a process instance flashes in task manager but the instance doesn't run].
    tm already shows a process instance from my 1st use of the app, if i click 'end process' it doesn't end but by 'end process' i can reload the app.
    a 2nd process runs in tm for the 2nd use of the app [the number of process instances concurs with the number of times i have used the app during the same computer session].
    i must click 'end process' in tm for EVERY instance before i can again reload the app [lets say i've used the app 7 times during that same computer session, then i must 'end process' the 7 instances in tm BEFORE i can open the app again [thus resulting in another process instance].
    can anyone help me with this issue!??!? i've logged a bug report and i'm disgruntled to learn that i won't get a response from them!!! *salutes adobe*
    i have a couple more issues [all since upgrading/updating to reader 7.5 and this app and i might have to rely on your collective heads to get it solved cos i doubt i'll get any relief from sending bug reports [after all, it could be my installation]. i have uninstalled and reinstalled a number of times to try and sort it out myself, but i am failing and i'm beginning to lose patience.
    thanks and best regards
    rox

    :)
    thank you for your reply ... i very much appreciate it *smiles again*
    i've actually uninstalled the damn thing ... as i have done also with adobe reader [7.0.5 or something ... the current version anywayz] anticipating that uninstalling AND reinstalling the reader only would cure my ills ... UNFORTUNATELY, it didn't ... everytime i USE the reader, it too refuses to open if i *need* it during the same computer session AND it jams my log off/shutdown ... its another 'task manager ... end process' issue too ... methods of closing the program mess with my computer :/ ... so annoyed!!!
    this situation however i will reserve for an independent [sp???] thread...
    i will reply again to this once i have performed the *deletions* you have recommended for PSA SE 3 ... i think tho i need some answers regarding my *reader* issues first *scratches head*
    thank you diksha for your interest and i am sure, valuable information...
    rox :)))

  • Psa data

    hai,
    when i am loading data i have one error record
    now i want to delete that error record
    and load it into data target
    but deleting all the records is possible but
    selective deletion is possible in psa or not?
    please suggest me
    i will assign points

    Hi All,
    I have an similar issue with my data in PSA. Only one record is showing an error.I have modified that perticular record in PSA by deleting the request in data target. But now, my doubt is how to u upload the records from PSA to data target after correction.
    I have tried it through Reconstruction/Insert option....but, the data target request is showing in RED color( and no data has been uploaded to Cube)
    Please through some light on this.............
    Its Urgent.....
    Thanks,
    kamal

Maybe you are looking for