PSA Error

Hi,
When i am loading the data the system throws an error instantly like +********ERROR IN PSA********+.
Kindly help me out.
Regards,
MGR

HI,
Can u explain the error clearly, u can c the error details and where exactly data gets structed in RSMO-Details tab.
Regards
Ramakrishna Kamurthy

Similar Messages

"PSA error" and "error 6 in the update" ...VERY IMP!!

Hi All,
I am facing this very strange and critical problem.
Delta load failed due to "PSA error" and "error 6 in the update" for two Infosources.
The Infosource 1 ( Header)- I was able to successfully edit the PSA error and update the delta from the PSA to the ODS....problem solved
The Infosource 2 ( Item ) - The delta for this request is sent to from this Infosource to ODS's .It is allowing me to edit the PSA data and save it. But even after editing and saving, when I am updating the delta to the ODS the request goes red. When I see the reason, I find the same "error in the PSA "and the" Error 6 int he Update". Looks like the edited data is not getting saved.
The error in PSA was ..date was wrongly entered with wrong year in it. So therefore it clashes witht he fiscal yr variant for that infosource.
Tried to do repeat delta for the next delta. Same issue.
__1. No clue why the edited data is not getting saved__
__*2. What is this " error 6 in the Update"*_
In the Status tab of monitor of that request:_
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Update rules
Second step in the update
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Please provide a solution. Very critical and important issue.

I got the same PSA error for another Header Infosource which updates data to one ODS, for which i could edit the data and then update the edited data into the ODS. The changes i have done are saved and had no issue with the infosource. and the load is successful.
But for this Item Infosource ( updates data to two ODS) , i got the same PSA error( Date entered worng) , i was able to edit the data in the PSA and save. but after editing and saving when i update teh request( after editing PSA) the request goes RED ( which means the i get the old values..wrong data).
Why am I not able see the changes i have done when i update the delta from PSA to ODS after editing?....really strange.
Is there any problem in the update rules or something for this Infosource( not sure)..becos i am gettng this "error 6" in the Update.
Please Rescue!

"****Error from PSA****" error message when loading InfoCube

Hi all,
I am getting the following error message when loading transaction data to an InfoCube.
***Error from PSA***
This is not MD or Hierarchies (like previous messages in the forum)
Please advise.
Thanks,
Miki

Hi Miki,
Before just loading data into the infocube. Catchup PSA table and see the data into it.
Then u may find the solution.
But as ronald said this shouldnot be the complete error statement.
bye.

Update from PSA error in Process Chain

I have a process chain in which I am using an InfoPackage to load data into 2 ODSs at the same time. I keep getting the following error in the 'UPDATE FROM PSA" process and the following are the messages:
-Job Started
-Step 001 started (program RSPROCESS, variant &0000000001438, user ID Z_R3USER)
-Performing check and potential update for status control table
-Specify valid date
-Job cancelled after system exception ERROR_MESSAGE
Can anyone tell me wht I can do?
Thank you for your input

Hi,
I was able to resolve this problem. It was not a problem with process chain, but was something to do with the data. The values for fiscalperiod were not in the right format.
Thank you all for your inputs.

2LIS_13_VDKON - PSA error

Hello dear BWers,
I am loading data from data source 2LIS_13_VDKON (Condition values) but get an error message from the PSA:
"Arithmetical errors or conversion errors found in routine ROUTINE_0001 record 98 RSAU 507"
I see nothing wrong in the mentioned record in the PSA. What is wrong? My load gets red...
Best regards,
Fredrik

Hi,
It is the problem with standard content's update rule of "Condition Rate"
So change the update rule of "Condition Rate" to :
<b>IF( Billing Quantity SU <> 0, Condition Value / Billing Quantity SU, 0 )</b>
You are getting the error if the record has Billing Quantity SU equal to ZERO.
With rgds,
Anil Kumar Sharma .P
Assign the points, if it is helping you.

**** Error from PSA **** while loading 0comp_code (processing- info obejct)

Hi,
I am getting error **** Error from PSA **** while loading info object attributes for company code (0comp_code). I am not using oly info obejct in processing.
below is the error message.
Error from PSA ****
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Scheduler
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
I checked in SM37 in both source system and BW. I do not see any matches. I have tried loading other master data (for eg. customer) and all were successful. That clearly indicates that connection between ECC and BW systems correct (RFC connection, logical systems etc).
please advise.

Thank you for your answers and points assigned.
I am not using PSA in my data transfers i am using info object only option. I am also getting same error even if I use PSA . no change in error message.
when i click on psa in monitor. i am getting below error message.
-No data packet numbers could be determined for request.
detailed error message: (all are in red color)
Requests (messages): Errors occurred (RED)
      -Data request arranged (GREEN)
     - Error in the data request (RED)
Extraction (messages): Missing messages (RED)
        -Missing message: Request received (YELLOW)
       -Missing message: Number of sent records (YELLOW)
      -Missing message: Selection completed (YELLOW)
Transfer (IDocs and TRFC): Missing messages (RED)
Processing (data packet): No data (RED)
please advise and points will assigned. thanks for your help.

PSA Data Load Error

I am getting the following PSA error and am currently fixing this error manually. Could someone explain me how to have this in a Process Chain.
<b>failed step: psa cleaning
cause: not able to truncate psa because of inconsistency of data in partition
steps taken: make partition consistent using RSRVand return the load
</b>
Thanks,
Priya

Go to RSRV --> Go to Tests in Transaction RSRV -->PSA Tables -->Consistency Between PSA Partitions and SAP Administration Information## --> give the PSA table name here and press F8. Once you see errors press on Correct errors button and it shd get fixed.
You shd be able to get the PSA table name from the Process chain step variant..

Getting error " Incomplete update due to error in single records"

Dear All,
We are loading data from DSO to Cube using full load and the load is failing giving an error message Collection in the source system ended and when checked the error message button it is showing as " Incomplete update due to error in single records" . and also one more message "Messages (type E) for data records with record number 0
Message no. RSM2714". Can any one tell us the reason for the failure of this load ? and how to resolve it ?.
When we click on the help button of the error message it is displaying the message as below
Incomplete update due to errors in single records --> Long text
Message no. RSM2712
Diagnosis
In the update rules, one InfoSource record was used to create several records in the data target. These records must be handled in the same way to enable tracking into the PSA and the treatment of errors in individual records.
In the previous case, one record was updated in this kind of group generated by update rules, whereas other records in the same group were rejected. If you updated the PSA data record again, the records that were already updated would be updated again. Duplicate records would appear in the data target and the data target would thus be inconsistent.
System Response
The data record with errors was highlighted in the PSA. However, no error request was generated.
Procedure
Delete the request in the data target and, after removing the error, update all records for the request to the data target again.
Regards,
JayaKrishna

hi,
Can you please check out the PSA error record and check this out in Source DSO as this load is for DSO -> Cube....
Please correct it in PSA if this is not correct as per DSO ....prior correcting data in PSA pls delete the request from Cube.....then it will allow to correct or delete record in PSA and then further push data from PSA to Target Cube...
If its correct as per DSO then run load in DSO sometime few records wrongly updated by end user and they correct it by evening for Submission....So u will get the corrected record and then run manually further load to Cube...
Hope this will help....
Regards,
Mahesh

Error in loading

hi all
when loading to psa," Error in generating program" occurs .can anybody suggest the possible solution.
thank you
pradeep

hi activate the Tranfser rules with this program
RS_TRANSTRU_ACTIVATE_ALL
and reload
bhaskar

Error during DTP Activation

Hi all,
I have a DTP to load data from one DSO to another DSO. I'm getting the following error while activating this DTP,
Activation of Objects with Type Data Transfer Process
   Internal Activation (Data Transfer Process )
      Post Processing/Checking the Activation for Data Transfer Process DTP_4EQUEFXTS6NLNSRPCP2G
Error from PSA ****
        Error when activating Data Transfer Process DTP_4EQUEFXTS6NLNSRPCP2GSYT00
I'm not able to activate the DTP . How to solve this error?
Thanks in advance.

Hi,
     Are your DTPs delta loads? Sometimes, you may face this problem with the DTPs with delta loads. in that case, the delta DTPs don't get overwritten sometimes. This could be the problem.
Regards
sunil

Error while loading Masterdat attributes and text in sap BI 7.0

Hi Guys
Any one help me....Plz
I am new to sap BI, in this my first task and it is loading master data attributes and text into datatargets,I did it in SAP BW 3.5,
It is ok
But i got error in BI 7.0
The error is while loading master data attributes and text in master data targest(using insert charcterstic as a infoprovider)every thing is OK up to infopackage creation step,
Andthe data loaded properly into PSA,
But not into Data targets(i mean here data is not load into datatargets)
After i create infopackage
I created DTP wit settings
Extraction Mode:full
Error handlig: Valid records update,no Reporting(request red)
and i click on activate and on Execute push button
error occurred when i click on "Adminstrative data targets " icon
And the error shows in DTP REQUEST 108 Screen
and it is
**RedColour: updating attributes for infoobject smid_ml1:8->0 Data Records**
**Redcolour: end of master data update**
**Redcolour Message for datarecords saved request is red acc to configuration**
Plese guys let me know this error and give your view
Regards
Venkat
SAP BI consultant

@murali
I click on errorstack push button in DTP error screen But it is not but psa error stack right?
I c'nt get u could plese clear it?
And i also tried on error handling :valid records ...green But no use same error occur
But here i am not using cube to reactive again i send it to you mail my problem as screen shot
Thank u 2 all for ur replies but my problekm is not solved yer

Is there a way to find a specific record number in PSA?

I am using BI 7.0. I am getting an error that record no 7487 is invalid. Yet, I do not find a way to go to this record in PSA. It looks like I have to scroll through the whole PSA table for a request and look for a red status. Is there a faster way?

Hi,
here you will find a report:
PSA error records download
To few PSA table you can use se16 (you can get the PSA table name by right clicking the Datasource ->manage. On the top you will get the PSA table name)
Additional check:
finding the error record in datapackage of psa
Error in PSA & Update
Regards
Andreas

Master data failed with error `too many duplicate records'

Dear all
below is error message
            Data records for package 1 selected in PSA -
            error                                                 4 in the update
LOng text is giving as below
Error              4 in the update
Message no. RSAR119
Diagnosis
The update delivered the error code                                                   4.
Procedure
You can find further information on this error in the error message of the update.
WOrking on BI - 7.0
any solutions
Thanks
satish .a

Hi,
Go through these threads, they have same issue:
Master data load: Duplicate Records
Re: Master data info object - duplicate records
Re: duplicate records in master data info object
Regards
Raj Rai

PSA Partition

Hi All,
When I load the master data, I am getting following short dump for only one master data again and again.
Error with partition when loading
Error:
Communication errors (RFC)
DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB ORA-14400:
inserted partition key does not map to any partition
Internal call codeu2026u2026u2026: u201CRSQL/INSR//BIC/B0000xxxxxx u201D
Solution:
RSRV -> PSA Tables -> Consistency Check for PSA
Error calling number range object for dimension when loading cube
I follow the following solution...
Solution:
1. rsrv > all elementry tests > master data > compare number range and maximum sid > execute. press [u2026]
It works for only one week, then again nightly data load for the same master data fail.
Is there any long term solution to fix this issue ?
Is that good idea if I create a program for function module RSDDCVER_PSA_PARTITION to run daily basis?
Since it happens in only one PSA table, anyone have any ideas why it happens only one master data PSA table?

Hi.........
Check SAP NOTE 339896............but is for BW 2.0
Check SAP Note : 675760..............for ur reference........
Symptom
You want to change the definition of an existing InfoCube.
Other terms
Conversion, ORA 14400, field change
Reason and Prerequisites
If you add or delete a key figure in an InfoCube, the structure of the fact tables changes.
These must therefore be converted in se14.
Solution
Before you start the conversion, you must compress all requests of the F fact table into the E fact table, because the converter cannot handle the BW fact tables that are structurally different from normal R/3 database tables.
Also u can try to repair the PSA partition in tcode RSRV..................
Regards,
Debjani......
Regards,
Debjani........

Error when activating DTP for InfoCube

Hi
I encountered an error '**** Error from PSA ****' 'Error when activating Data Transfer Process DTP_436DF8XYKE2Y97CUX9W7FM0JH' while trying to activate the DTP for an infocube. Does anyone know why this happens and how to fix it ?
I'm on support pack 9 at this moment.
Many thanks,
Anthony

Hi Gnana
Thanks for your reply. Yes, I had already created the transformation for the bespoke cube, checked, saved and activated it without any error. Next, I created the DTP for this cube. Checked it and there wasn't any error. However when I activated it, I received that error message. I didn't get this error when I activated DTP for DSO and master data infoobject.
I have deleted and created the DTP like 5-6 times and still faced the same error message.
Prior to applying support pack 9, I didn't get this error message. Now that I did and also applied the collective OSS note 978148 (BI in SAP NetWeaver 2004s: OSS notes after SPS9), I received this error message.
Regards,
Anthony

PSA Error

Similar Messages

Maybe you are looking for