PSA level issue USD is coming as USD, for some records .

Hello Experts ,
Very Good evening , I am facing one issue regarding the data load in the cube , actually I am loading data from a flat file having some 51 records ,till my PSA data is coming correct but with one modification i.e. in some records near about 16 records out of 51 one field data USD is coming like USD, means one comma (,) is automatically coming in the PSA level ,thats Y my rest of the records are not getting loded , can u please help me in this case to resolve it , waiting for the reply , and Thanks in advance .

Open the CSV flat file in Notepad (right click on file and open with notepad) and see if there is any comma after USD.You can make correctionsin notepad version and save it.Do not open in CSV and make corrections.
Regards,
JB

Similar Messages

Issue regarding 0MATERIAL_ATTR - Attribute not Updated for Some Materials

Hi All,
As per requirement, I had enhanced 0MATERIAL_ATTR DS with one customer field MRP Controller.
After enhancing 0MATERIAL_ATTR, I had made necessary changes in related objects like 0MATERIAL Info Object & related transformation for this new attribute.
After making changes, when I had done Repair full request for 0MATERIAL_ATTR, newly added attribute had not updated for all material, other attributes were updated correctly but MRP controller had not updated for some records.
I am confused with why attribute(MRP controller) updated in some Materials & for some materials its not updated.
I had checked in PSA, data for this added attribute is come in PSA but not updated in data target (0material).
I had also activated master data by running Attribute change run but still problem persist.
Please help.
Regards,
Divyesh Khambhati

Hi Venkatesh,
I had write code in CMOD for MRP controller.
As data is coming fine till PSA but its not updated in Data Target (0MATERIAL) .
if I take one example..
For exp Material XYZ has two entries in PSA table, one is updated during delta load & recent one which come though Repair Full request.
Now newly adder attribute MRP controller available in recent request of Repair Full but that is blank in case of prior delta update.
I am confused because MRP controller attribute is updated for some Material but for some material its remain blank.
please help.
regards,
Divyesh Khambhati

Issue exporting XML of a Sequence for re-recording/mixdown

I'm trying to export a large sequence in XML (4) for use in Logic Pro so we can mixdown/re-record etc.
While I've done this many times before we've run into a little problem. Essentially each scene in the short film was assembled as it's own sequence then all the sequences were pieced together (nested) in another sequence.
When that final sequence is exported via XML so that it can be opened in Logic only audio files pertaining to any clips that were directly inserted into the sequence appear. IE. no audio for sequences that are nested. Is there a workaround or an option I'm not seeing?
Is there a way to turn nested sequences into clips again?
Any help or ideas would be appreciated.
Thanks!

I was looking for a feature like the one in Logic where you can right-click (or command click if that's your thing) an aliased file or a set of loops and turn them into the real thing.
Like a "convert sequence to clips" option.
Instead of your suggestion I'm simply deleting the nested sequences and dragging them back onto the timeline holding down the command key - which turns them into clips. But it would be nice to have the feature I'm suggesting so you can edit nested sequences until everything is in place and then turn them all into clips in the final sequence when you're ready to move everything into Color or Logic or Shake or all three!
TIme to head to the Feedback page!

Issue at PSA Level data

Hi,
I am trying to extract data from the 0CRM_COMPLAINTS_I into BI. I have to enhance this DS with two Z fields. I can clearly see data populated for these Z fields in RSA3 with the enhancement code.
When I tried to get the same into BI, the data is not being populated even at the PSA level. I tried deleting the old requests at PSA level and target level and then extracting but of no use. Instead it is showing some junk values for the Z fields at PSA.
I am working on BI 7.0 and CRM 5.0.
Please let me know ASAP.
Thanks in advance,
Rama Murthy.

Hi,
you need to replicate the datasource as well as to maintain the transfer structure. In there you need to put the new fields from the right hand tab (datasource) to the left hand tab (transfer structure). Activate the transfer rules. Reload the data and you will see the new fields.
regards
Siggi

Excise invoice not getting converted into INR from USD for an IMPORT PO

Hi All
I have posted one Import PO. Did MIRO for custom and CVD. MIRO doc was in USD which is getting converted into INR as per the exchange rate maintained in OB08.
Then I did MIGO with the ref of comm invoice of MIRO. Now MIGO doc is posted in INR as per exchange rate maintained in OB08 for custome duty and Freight and base value.
For Excise invoice , CVD is getting captured but in excise tab, base amount is showing in INR and currency also shows INR which is correct.
Total Basic duty (BED) , Cess and Hecess iamount s coming in USD but curency is showing INR. After posting the doc also it has not getting converted into INR and the same USD amounts got posted in Excise GLs and currency still showing INR.
For example:--
PO value shows
Base Price - 2040.20   USD
Custome   -     204.20    USD
CVD         -      179.54    USD
Cess on CVD      3.59    USD
H Cess on CVd 22.44 USD
Now in excise invoice in Excise item tab
Base value - 99960 INR (converted at teh rate of 49 , exch rate type M)
BED -   179.54 INR
CESS - 3.59 INR
HECESS 22.44 INR
Here only currency is changed to INR but amounts are still in USD. After posting the doc also same result is coming, hence Registers are getting updated with wrong values.
Can any one suggest what to do to correct this.
Regds
Mukta
Customization for CVD maintained in Excise config -- company code setting- exchange rate type for CVD is M.
OB08 maintained for USD to INR for the current date.

HI Tej
All the Import cycle has created three documents.
1. MIRO doc for custom duties and CVD .--   MIRO posted in USD . I can see the doc in both currency - INr and USD via accounting doc - display currency. I do not have any issue.
2. MIGO doc - for custom duty and Freight -   MIGO posted in INR , I can see accounting doc in USD and INR both via accounting document- Display currency and even in the MIGO -- purchase order history tab.
3. Excise Invoice - for CVD - EX Invoice posted in diifferent way --
In this document please note amounts for CVD is as per USD rate , but currency showing is INR , which is a mismatch.
in Excise customization for company code setting - exchange rate type M is maintained. OB08 is also maintained for USD/INR
Condition type JCV1 is also marked with currency conversion and accruals.
Is there any patch or note I need to apply to getting this converted , or any process issue.
Regds
Mukta

Error in psa level - Request not updated to any data target using delta

Hi,
This is pavan and am facing this issue any one know for below issue to solve.
Data Flow is BW Version and Implemented in BI 7.20 version.The issue was data has come
to psa level but from here it is not updated to infocube so for that i have tried update manually
it is showing information that 1334 SID IS SMALLER THAN / EQUAL TO 47287 CANCELLED.
In Process Chain DTP is not included so how can i update data to infocube with out disturbing process chain
Regards,
Pavan Kumar

Hi Pavan Kumar ,
Please log on Tcode RSRQ -then give old request number (I think in your case 1334 is old request number),
and you will get monitor for that request then change the QM status to red after that load new request .
Thanks
Hanumanthu

ERROR IN PSA LEVEL

*Hi Experts,*
*This is kalyan and i am facing a issue in BI 7.20 VER from past 1 week am not able to solve.*
*this issue is process chain scheduled daily basis and process chain getting failed failed from 01-01-2011 to till date*
*but records available in psa level but not reached target then when i try to do schedule manullay but*
*in data target tab it is not showing target.i have tried with process manually this option available ipsa under header tab*
*when i choose that option it is showing this error SID 1334 is smaller than /equal to update SID of DTA ZSD_BLCO3/47287;Canceled please help me in this issue if one knows and what will be solution.*
*Thanks In Advance,*
*Kalyan*

Hi
As you told this is running in Process chain. Do you have "Update from PSA" step after this IP is completed.
check the job log of IP load in SM37, check the error log in Job.
If you don't have Update from PSA step in PC, include it in your PC or make the changes to IP ( change the option to PSA and then data target in series in update tab)
Regards,
Venkatesh

I have the 11" MBA, I was updating the software to Lion X , which is free update for me. I was charged 1 rupee on my account yesterday, BUT today again I was charged 20 USD for iTunes ( which I didnot purchase). Please advice.

I have the 11" MBA, I was updating the software to Lion X , which is free update for me. I was charged 1 rupee on my account yesterday, BUT today again I was charged 20 USD for iTunes ( which I didnot purchase). Please advice.

The battery will run UP TO 7 hours.
The run time depends on what you are doing.
Anything that puts a heavy load on the CPU will reduce the run time.
There is a fixed amount of energy in a charged battery.
The faster you take energy out the shorter the run time will be.
Turn off bluetooth.
Reduce backlight to as low as is comfortable for you. I use level 5.
Watching video uses a lot of energy.

How can I move my left over money from my UAE account into USD for my American itunes account?

How can I move my left over money from my UAE account into USD for my American itunes account?

How can I go back to my US account then?? I only have .03 aed left..

No G/L account has been specified for O /USD for the bank

Dear All,
When i run automatic payment using F110 there are an error message "No G/L account has been specified for O /USD for the bank"
What should I do to solve this problem ?
Thank You.
-tweety-

Hi,
I think 'o' is your payment method. In automatic payment program, ranking order you given payment method as 'o' and house bank. Check in FI12 for this house bank the gl account attached.
Regards,
Sankar

Create authentication at psa level

Hi,
I need to create authorisation at PSA level as the same needs to be restricted but the prob which I m facing is tat PSA is not a level of authorisation ORGIN. Hence authorisation at PSA level needs to be created, pls guie me.
Tx

Hi,
First of all try to investigate if you can manage your authorization requirements using standard SAP objects. As it was suggested please consider use of Organization key (where you can store almost any field from IT 0001).
If you think there is no other option rather than creation of custom objects, then study this guide: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c?quicklink=index&overridelayout=true
Cheers!

PSA level Errors are not displayed

Hi friends,
    I'm using BI 7.0....up to PSA i'm getting data perfectly.. Even though some errors are there i mean.. data mis match in my flatfile(for NUMC fields I was enterd Charecter data... ... that time also.. psa level data was showing green only.... if i upload into ODS then only i'm getting problem..
      but   in previous versions it was showing Red (for error reacords..) in PSA level itself...
     for what reason I'm not getting like this.... is there any problem with my procedure.. or   is this BI 7.0 feature..
plz clarrify..
Thanks
babu

Hi,
    Using the Error Handling function on the Update Parameters tab page in the scheduler, you can control the behavior of the BI system if data records with errors occur in the data flow with 3.x objects (use of transfer and update rules) when you are loading data using the PSA.
The system checks for data records with errors:
      in the transfer rules
      in the update rules
      when data is updated to the master data tables, text tables, or hierarchy tables
      when data is updated to the InfoCube
      when checking for referential integrity within an InfoObject against the master data tables or DataStore objects on the communication structure level.
Features
Incorrect records arising in transfer rules, update rules, when updating to a data target, or when checking for referential integrity, are highlighted and returned to the error handler. The error handler locates the original PSA records and writes the corresponding log. This function is not yet available for updating to DataStore objects.
Using the Error Handling function on the Update Parameters tab page in the scheduler, you can control how the system responds to incorrect data records.
Activities
       1.      Define how the system should react to incorrect data records
a.       No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
b.       Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request (using a QM action, that is, by setting the Overall status on the Status tab page in the monitor).
c.       Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
With option a), the incorrect records are marked in red in the PSA maintenance. You can display the relevant error messages amodally, edit the records, and update the request manually. If it was not possible to write to the PSA (hierarchy or transfer method IDoc), an application log is written instead.
With options b) and c), a new request that is only updated to the PSA is formed from the incorrect records. Here you can edit the records of the new request in the PSA and start the update manually.
If errors arise when an InfoCube is updated, new requests are generated for incorrect records for each InfoCube combination. Among these requests, the incorrect records are updated to the PSA. These new requests have entered as data targets the InfoCubes for which there were incorrect records. If, for example, a record was updated to two InfoCubes by mistake, a request is generated for this record that contains both InfoCubes as data targets. In the PSA tree, the requests appear as successfully updated in the PSA. These new requests can then be triggered again for updating to the InfoCubes.
       2.      Specify the maximum number of incorrect data records that are allowed before the system terminates the load process. In the PSA, you can display the errors that have arisen up to that point. If you do not specify the maximum number of incorrect records after which termination should occur, the handling of incorrect data records is inactive and the update terminates after the first error.
       3.      Define how the BI system should react if the number of data records received by the BI system is not the same as the number of data records updated in BI.
A difference between the number of received and updated records can occur:
         in the transfer rules
         in the update rules
         when updating
Records are sorted, aggregated, or added.
If you set the No Aggregation Permitted indicator, the request is deemed incorrect if the number of received records is not the same as the number of updated records.
Regardless of this indicator, an error occurs if the number of selected records is not the same as the number of records received in the BI system.
Result
The monitor directs the user to the relevant error case and enables a direct navigation into the PSA or the respective error request.
If you want to continue processing the incorrect data records in a program that you have written yourself, you can use the method GET_ERRORS of class CL_RSSM_ERROR_HANDLER. The use of this method is documented in the RS_ERRORLOG_EXAMPLE.
More Information:
Checking and Changing Data Using the PSA APIs
To perform complex checks on data records, or to carry out specific changes to data records regularly, you can use delivered function modules (PSA-APIs) to program against a PSA table.
If you want to execute data validation with program support, select Tools ® ABAP Workbench ® Development ® ABAP Editor and create a program.
If you use transfer routines or update routines it may be necessary to read data in the PSA table afterwards.
Employee bonuses are loaded into an InfoCube and sales figures for employees are loaded into a PSA table. If an employees bonus is to be calculated in a routine in the transformation, in accordance with his/her sales, the sales must be read from the PSA table.
Procedure
       1.      Call up the function module RSSM_API_REQUEST_GET to get a list of requests with request ID for a particular InfoSource of a particular type. You have the option of restricting request output using a time restriction and/or the transfer method.
You must know the request ID, as the request ID is the key that makes managing data records in the PSA possible.
       2.      With the request information received so far, and with the help of the function module, you can
         read RSAR_ODS_API_GET data records from the PSA table
         write RSAR_ODS_API_PUT changed data records in the PSA table.
RSAR_ODS_API_GET
You can call up the function module RSAR_ODS_API_GET with the list of request IDs given by the function module RSSM_API_REQUEST_GET. The function module RSAR_ODS_API_GET no longer recognizes InfoSources on the interface, rather it recognizes the request IDs instead. With the parameter I_T_SELECTIONS, you can restrict reading data records in the PSA table with reference to the fields of the transfer structure. In your program, the selections are filled and transferred to the parameter I_T_SELECTIONS.
The import parameter causes the function module to output the data records in the parameter E_T_DATA. Data output is unstructured, since the function module RSAR_ODS_API_GET works generically, and therefore does not recognize the specific structure of the PSA. You can find information on the field in the PSA table using the parameter E_T_RSFIELDTXT.
RSAR_ODS_API_PUT
After merging or checking and subsequently changing the data, you can write the altered data records into the PSA table with the function module RSAR_ODS_API_PUT. To be able to write request data into the table with the help of this function module, you have to enter the corresponding request ID. The parameter E_T_DATA contains the changed data records.
Result
The corrected data is now available for continued updates.
if it helps plz assign points

Psa level 91 records ,dtp level 0 records

Hi friends,
i have run the process chains daily still in yellow color infopackage run , dtp not run in psa level records are ther 91 dtp level it shows 0 records.
errors are
1)Process Execute InfoPackage, variant Delta Upload - 2LIS_02_SCL has status Undefined (instance )
2)Process Execute InfoPackage, variant Delta Upload - 2LIS_02_ITM has status Undefined (instance )
3)Process Generate Index, variant Generate Index for Purchasing has status Undefined (instance )
     Process OR (Each), variant Every has status Undefined (instance )          Process Data Transfer Process, variant 2LIS_02_SCL / CPPCLNT400 ->
4)0PUR_C01 has status Undefined (instance )Process Data Transfer Process, variant 2LIS_02_SCL / CPPCLNT400
5)0PUR_C04 has status Undefined (instance )

i got the same error, do u know how you fixed yours

Issue with late coming hrs deduction

Hello,
We have positive time management in place for plant workmen and one absence configured called Late coming to duty.
for which deduction take place in case person reports late in duty.
Now issue is, if workers are doing off-day duty on sunday or wrongly punched on sunday at some late hrs, then at the month end whole day's salary is getting deducted instead of only for late coming hrs. By default in IT2001 "Full Day" indicator is getting selected, therefore we cannot specify the hrs of late coming.
Please sugest how to rectify it, how to deselect the "Full Day" indicator in IT2001 and configure the required late coming hrs.
Do i need to do any modification in counting rule of that absence??
Regards
Tan

Thanks Ranjeeta...it was helpful
Can you please help in another issue i am facing related to it, which is related to fixed sunday off. We do have work-schedule defined sunday as off-day for all employees. But still system is not checking it and deducting salary in case there is no punching on Sunday. For resolving it, we are uploading a off-day special daily work-schedule for all employees in IT2003 and also maintaining variable offs there in case employee works on Sunday.
Now, problem is when employee's off is already defined on sunday in IT2003 and by mistake he punches on Sunday, system is not reading that and allowing his attendance to be recorded.
Please advise, how to rectify this issue.
Regards
Tan

Why i have been charge 1 USD for free application download from apple store?

i am using iphone 4 .i have download friendcaller pro - free application from apple store.it is free appilcation even then i have been charge 1 USD
for this application.why 1 USD is charge for free application.?

Hi,
You haven't Actually been Charged...
See Here for Details...
iTunes and App Store Credit Card HOLDS
http://support.apple.com/kb/HT3702
Cheers,

PSA level issue USD is coming as USD, for some records .

Similar Messages

Maybe you are looking for