PSA Loading issue
Hi Xperts,
i have created a generic data sources by using infoset query(merge 2 data sources).
now when i want to see the data in PSA, i am not getting the data for one field say'XXX"(rest of the values are coming for all the fields)
i checked that 'XXX' field in respectiev table and in table the values are coming for this field.
but when i am checking in PSA the field is showing Blank.
i checked the data source's selection screen in RSO2.But every thing seems fine.
can any tell me why the data is not updaing to PSA?
Regards,
satish
Hi Satish,
First check whether you are getting the data in RSA3 trans in R/3 side for that particular field. If you are able to see the data over there, then check in RSA6 trans that the fields in not hidden(Uncheck the Hide selection field) & then check the data in BW side in RSA1 trans.
Hope it helps!
Regards,
Pavan
Similar Messages
-
Data Load Issue "Request is in obsolete version of DataSource"
Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
SamitHi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu. -
PSA load remains in yellow status.
Hi Gurus,
I have created a generic datasource based on function module.
I have replicated the datasource in SAP BI dev instance.
I have even checked the extractor checker in R/3 and it shows 381 records.
On BI side I am loading data upto PSA.When I execute the infopackage for full load in the monitor screen I could see
"381 out of 0 records".The request remains in yellow status.
The idoc status in source system side is 03 and on BI side is 53.
I dont get any error message.Even I am not seeing idocs with red status in SM58 tcode.No logs are seen in sm21.
I even asked the basis team to check for RFC connection SM59 and partner profile.Every thing looks fine .
This loading issue is only happening with this specific datasource(ie datasource created on function module).
For other datasources load are carried out fine.
Has anybody faced a similar issue?.Please help in this regard.seems the load is hung bcoz of thehung IDOCs.
Process the idocs manually. after
check the below things
--> Check weather the source system job finished or not?
If the job is finished check the TRFCs are processed or not?
In the monitor screen - menu bar --environment -->job overview (to check the job) -->TRFcs - to check the TRFCs.
Check for short dumps using transaction ST22.
-->Check for the Idocs in BD87 and if there are any IDOCs got stuck process them manually.
To process Idocs first change the status of request to red and try to process them in the background. -
SAP Mobile Sales 2.0 delta load issue for Sales Orders
Hello,
we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
Background
Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
Settings and troubleshooting so far
We don't have any limitations for sales orders in CRM Sales Mobile configuration.
We've run delta loads for all objects in transaction SDOE_LOAD.
MAS_CUSTOMIZATION etc seem fine.
We've re-run initial load for sales orders from CRM.
In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
Checked steps suggested in discussion
SAP CRM 2.0 initial load issue
Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
If I change one of those historical sales orders in the backend, it gets sent to the device.
If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.First Doubt i got clarify by my self as we can go with Unwired Runtime option .
But i still have doubt in :
2. How can i Modifying the Main Menu for iOS.
i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
Same how can i do for iphone/ipad. -
Hello all,
I am using Oracle 6i for report and oracle10g for the database.I have created a matrix report in oracle Report but which report taking so much time to show the output it almost taking more than 10 minutes,at the same time that query executed within 1 minute in toad which used in matrix report.
kindly guide me how to solve the loading issue.I did not used any formula column in my report,all the values are taking from query.
But I used different types of format trigger in my report for the coloring purpose.Does it make any problem? -
Index.php loading issue
I finished and uploaded a new site in .php.
I have a graphics loading issue only with IE.
The js accordion with images will not reload after returning to the home page.
Anyone out thier that can shed some light on this?
http://carpetcleaningsantabarbarapro.com/index.php
Thank you in advance
CrissymarieKen might be on to something. The current release of jQuery is 1.7.2 which is compatible with jQuery Cycle.
For the latest core library, you can link to jQuery's CDN like so:
<script type="text/javascript" src="http://code.jquery.com/jquery-latest.min.js"></script>
You have some improperly nested <h3> tags around your lists on lines 170 and 191. To keep your code error free, simply delete the heading tags.
Finally, as a courtesy to your site visitors, consider adding a cookie so people don't have to watch the Flash Spokesperson every time they go to your home page. The link below shows how:
http://alt-web.com/DEMOS/cookie-test-show-hide-flash-intro.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/ -
I am having an issue where the data that drives a tilelist
works correctly when the tile list is not loaded on the first page
of the application. When it is put on a second page in a viewstack
then the tilelist displays correctly when you navigate to it. When
the tilelist is placed in the first page of the application I get
the correct number of items to display in the tilelist but the
information the item renderer is supposed to display, ie a picture,
caption and title, does not. The strange thing is that a Tree
populates correctly given the same situation. Here is the sequence
of events:
// get tree is that data for the tree and get groups is the
data for the tilelist
creationComplete="get_tree.send();get_groups.send();"
<mx:HTTPService showBusyCursor="true" id="get_groups"
url="[some xml doc]" resultFormat="e4x"/>
<mx:XMLListCollection id="myXMlist"
source="{get_groups.lastResult.groups}"/>
<mx:HTTPService showBusyCursor="true" id="get_tree"
url="[some xml doc]" resultFormat="e4x" />
<mx:XMLListCollection id="myTreeXMlist"
source="{get_tree.lastResult.groups}"/>
And then the data provider of the tilelist and tree are set
accordingly. I tried putting moving the data calls from the
creation complete to the initialize event thinking that it would
hit earlier in the process and be done by the time the final
completion came about but that didn't help either. I guess I'm just
at a loss as to why the tree works fine no matter where I put it
but the TileList does not. It's almost like the tree and the
tilelist will sit and wait for the data but the item renderer in
the tilelist will not wait. Which would explain why clicking on the
tile list still produces the correct sequence of events but the
visual component of the tilelist is just not working right. Anyone
have any ideas?Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.
-
BI Load issue in the transformation/DTP after SP 17
Hello,
After SP 17 applied in our BI system, we are having load issue in one particular transformation/DTP.
See below the errors:
u2022 Messages for 101 data records saved; request is red acc. to
configuration
u2022 Thee is no active nametab in the system, although an active ABAP/4
Dictionary object was expected. Reactivate the ABAP/4 Dictionary object.
Also I have activated the DSO, transformation and DTP. Also I went to SE14 and try to adjust my DSO, SE11 and activate the table but still having the issue.
Can someone advise me on how to resolve this issue?
Thanks a lot.
CesarHi,
Do the following: In BI, run transaction SE38 >> RSDG_CUBE_ACTIVATE to recreate the Metadata information
for the Info-provider.
Then execute another program via SE38: RSDD_RSTMPLWIDTP_GEN_ALL
See Note 1161940 and 1152453 for more details.
Regards, -
I have a problem with this. The jobs in the screen snapshot below are running too long - 2LIS_11_VAITM, 2LIS_11_V_ITM, and 2LIS_13_VDITM. They use to run for just a couple of minutes. The job configuration is; when the first job finishes a delay of 10 minutes will be incurred then the second job will run, then another 10 minute delay before the third job runs. After these 3 jobs are complete an activation job needs to run. This activation job began to fail because the first 3 jobs were not finished. For now, the activation job has been moved but we need to understand why these are running longer and fix it. We may be experiencing a problem with database performance in PDF but I would not think it would take that much longer.
This is the BW sales load issue
The info-package group is schedule @ 00:05 am and it contains 3 info-packages: VAITM, V_ITM and VDITM with 10 minutes execution gap.
The first VAITM started 00:05:46 and ended it up in BW at 00:09:02.
Then we have 10 minutes delayed between jobs.
V_ITM started 00:20:12 and for some reason it finished at 01:00:51. We can see communication between PDF and BWP took much longer than normal.
Then we have 10 minutes delayed between jobs
At 01:00:25 the activation job started and failed. It requires the info-packages to be in GREEN status but V_ITM finished @ 01:00:51.
It probably failed because V_ITM still had YELLOW status at the moment.
VDITM started 01:12:02 and finally finished it load at 02:09:16. A big communication delayed between system.
See below an example of the load on the 01/14/2007. It looks normal communication between systems
Could you please give solution for this.
Thanks
Vasu.Hi,
For every job you define and at the same time, you can also define the priority
levels to each job, since, during your job execution might be your job queue is
full with some other background processings, so try setting up the priority levels
of the job.
cheers,
Pattan. -
Does resteasy API have class loader issues when using via OSGi
Does resteasy API have class loader issues when using via OSGi
Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum. -
I am new to Demantra. Have installed a stand alone Demantra system in our server. In order to load data, I created a new model, defined item and location levels, then clicked on 'Build Model'. The data is loaded into 3 custom tables created by me. After creating the model, I cannot login to 'Collaborator Workbench', it gives message 'There are system errors. Please contact your System Administrator'. Can anyone please tell me what I am doing wrong and how to resolve the issue.
ThanksOk, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.
-
Integrated WL/Jdeveloper class loading issue
Hello,
I am trying to run a deployed project , getting into this class loading issue. Any idea?
javax.security.auth.login.LoginException: java.lang.LinkageError: loader constraint violation: when resolving interface method "com.scat.util.identity.UserFactory.lookup(Ljava/lang/String;)Lcom/scat/domain/identity/User;" the class loader (instance of weblogic/utils/classloaders/ChangeAwareClassLoader) of the current class, com/scat/auth/authentication/login/UserLoginModule, and the class loader (instance of sun/misc/Launcher$AppClassLoader) for resolved class, com/scatl/util/identity/UserFactory, have different Class objects for the type com/scat/domain/identity/User used in the signature
Thanks
RamHow many times are you loading the com/scat/domain/identity/User type?
Is this in the system classloader and the application? and are you using class loading filtering in the application, for example,
in weblogic.xml - prefer-web-inf-classes? -
Data Loading issues in PSA and Infocube
Hi team,
i am loading data into PSA and from there into info cube via a DTP,
when i load data into PSA all 6000 records are transfered to PSA and process is completed sucessfully,
When i execute the DTP to load data into info cube the data load process is completed sucessfully but when i observe
the "manage" tab i see
"Transferred 6000 || Added Records 50"
i am not able to get as why only 50 records are loaded into infocube and if some records are rejected where can i find them and the reason for that,
kindly assist me in understanding this issue,
Regards
bshi,
The records would have got aggregated based on common values.
if in source u had
custname xnumber kf1
R 56 100
R 53 200
S 54 200
after aggregation u will have
custname kf1
R 300
S 200
if u do not have xnumber in your cube.
Hope it is clear now.
Regards,
Rathy -
BI 7.0 data load issue: InfoPackage can only load data to PSA?
BI 7.0 backend extraction gurus,
We created a generic datasource on R3 and replicated it to our BI system, created an InfoSource, the Transformation from the datasource to the InfoSource, an ODS, the transformation from the InfoSource to the ODS.
After the transformation creation between the InfoSource and the ODS is done on this BI system, a new folder called "Data Transfer Process" is also created under this ODS in the InfoProvider view. In the Data Transfer Process, in the Extraction tab, picks 'Full' in the field Extraction Mode, in the Execute tab, there is a button 'Execute', click this button (note: so far we have not created InfoPackage yet) which sounds like to conduct the data load, but find there is no data available even if all the status show green (we do have a couple of records in the R3 table).
Then we tried to create an InfoPackage, in the Processing tab, find 'Only PSA' radio button is checked and all others like 'PSA and then into Data Targets (Package by Package)" are dimmed! In the Data Target tab, find the ODS as a target can't be selected! Also there are some new columns in this tab, 'Maintain Old Update Rule' is marked with red color 'X', under another column 'DTP(S) are active and load to this target', there is an inactive picture icon, that's weird since we have already activated the Data Transfer Process! Anyway, we started the data load in the InfoPackage, and the monitor shows the records are brought in, but since in the Process tab in the InfoPackage, 'Only PSA' radio button is checked with all others dimmed that there is no any data going to this ODS! Why in BI 7.0, 'Only PSA' radio button can be checked with others all dimmed?
Many new features with BI 7.0! Any one's idea/experience is greatly appreciate on how to load data in BI 7.0!You dont have to select anything..
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explainations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
<b>Pre-requisite-</b>
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Hope it Helps
Chetan
@CP.. -
Hi Xperts,
when i am executing the infopackage in monitor screen i am getting error messgae.
"CALL_FUNCTION_REMOTE_ERROR".
As i am unable to load the data into PSA.
can any one please help me on this?
Regards,
satishHi Satish,
Please check the connection between the BW & the source system. Goto your source system> Right click> check.
If there is any error, check with the Basis people.
Hope it helps!
Regards,
Pavan
Maybe you are looking for
-
Problem with logout in servlet After logging out i need to expire the pages
I have a problem in logout using servlet. I introduced sessions in my page and while logout i used session.removeAttribute("name"); session.removeAttribute("password"); res.setHeader("Cache-Control","no-store"); //Directs caches not to store the page
-
Can't change the 'compilation status' for multiple items in iTunes 8.
Hi there, I've got an issue regarding the disappearance of the compilation 'tick box' when changing multiple items. Its there when you click on 'get info' for the individual track but its no longer there (in iTunes 8) when I want to change the compil
-
I was migrating from macbook to a new imac. Nothing showed up until I turned off the imac. When I restarted the imac everythign I'd previously done was gome and the migrated macbook desktop had taken over. How do I bring back the original imac settin
-
How do you rebuild all thumbnails?
I read in this forum that the latest update would reduce the size of the thumbnails directory and in some cases even quite a lot. My thumbnails directory is 9GB for 10,000 pictures so I figured I would give it a shot. Only I can't figure out how to r
-
Floppy controller malfunction of sorts...
for somereason my computer doesn't recognize my floppy drive. im assuming the problem has to do with the controller since ive used several different ide cables and floppies... any suggestions? send it back? ( i bought the mobo from mwave.com in dec