PSA Request not getting updated to DSO during Delta DTP

Hi All,
Came across a situation. There are 7 requests in the PSA and they are loading to a DSO through Delta DTP (no other settings checked). Now when we tried to acivate the DSO request it failed saying that one of the PSA requests is having SID older than the one you are trying to load now.
We checked the data mart status of this PSA request and found that it is not moved to the DSO during the delta load.
What we suspect is that somebody loaded that request enabling the DTP setting 'Only Get Delta Once' but not sure. Now we are looking answers for below queries.
1. What could be possible reasons for this?
2. How to confirm if somebody already loaded the request through 'Get Delta Only Once' setting?
3. What are possible options to get the data from that PSA request other than a full load from source system or PSA?
regards
Jitendra

hey Jitendra,
The possible reason for this might also be that someone deleted the request from DSO after is was loaded?
You can manually post the request into your target DSO by using "update with scheduler" option for individual PSA requests.
If you do not want these requests in DSO, you should turn them to red in data load monitor and proceed with activation.
Hope this helps!
Thanks,
Sheen

Similar Messages

XABLN not getting updated in delivery during PGI by IDoc

Hi Experts,
Please help with scenario below
I am posting an IDoc with XABLN (GR/GI Slip number) in the EDL20 segment
The IDoc posts successfully and performs GI too (the delivery is an utbound delivery and am doing a PGI using this inbound IDOc from customer)
But the GR/GI field is not getting updated in the Outbound delivery (this is for Italy, so GR/GI is required by business)
any inputs will be greatly appreciated,
Thanks very much
Usman
Edited by: Usman Basha on Jul 30, 2009 11:16 PM

Found this by my ABAPer (myself ).
I thought there must be a functinal solution for this one
but got to change some code to make it happen.
if anyone else is looking for the same:
go to user exit ZXTRKU03 and export the XABLN number to a memory id, will need this in the "USER exit save"
then go to SD user exit MV50AFZ1 and retreive it and update XLIKP-XABLN and read the XABLN number from memory and modify this internal table.
Thanks
Usman

Batch Classification data not getting updated during the GR of the PO

Dear Gurus,
While doing the GR of the Purchase order the classification data for the batch should get updated .However we can see those data in MSC2N (Change batch) but not in MSC3N (Display Batch) .While consultuing with SAP we found that the data in MSC3N is directly picked in the AUSP table but the data in MSC2 N reads the information directly from the
reference table field (MCH1-LWEDT & MCH1-LIFNR .My Qusetion is why this the AUSP entries are not getting updated during the GR itself.
Sumit Mohan

Hi Sumit,
I am not sure about your question, but if you want to populate the classification data during goods receipt then you need to maintain characteristics values in material master for classification tab under class type batch i.e. 022. After then it will apper during goods receipt for characteristics value for batch.
Regards,
Bhagat

Leave approved in Portal is not getting updated in Infotype 2001

Hello,
I am using the standard WF - WS12300111 for Leave Request in the Portal.
The workflow is working fine in the portal; Manager could approve / reject the leave request in MSS and it is updating the portal Team calendar and ESS Employee Leave details.
However the approved leave is not getting updated in the Absence infotype 2001 in the back-end system.
Could you help ?
Kind Regards
Desy

Program (SE38) - RPTARQPOST has to be scheduled in order to update the status of leave requests and post to PA2001 after they have been approved.
Is there any other way ?

Delta Records is not getting updated in delta queus when changes done

Hi All,
In Quality system , when a user makes a change to an order's ship-to address, the changes are "triggering" a delta record into the delta tables for BI to extract. This can be seen via tcode rsa3's delta tester.
In Productionn System, when the user makes the exact same change, nothing is added to the delta table and the changes never come over to BI unless a full extract is request for the order.
Why changes not getting updated, please give your inputs.
Thanks & Regards,
Venkat Vanarasi.

Do you have your V3 update job active and running? THis job wites changes to the delta queue. Of course your datasource has to been initialized and a delta queue should be setup. You can check it in RSA7.
Regards,
Juergen

Inspection lot is not getting updated in quant

Hi Experts,
Need your help..
I have posted two material doc with same material following is the consequences :
1.we have immediate TO creation process , so now we have 2 TO's and 2 inspection lots.
2.When i am doing UD for first inspection lot PCN does get created.
3.Now i do TO confirmation for putaway for TR and then TO creation and confirmation for PCN and material is in bin.
4.When i am confirming the TO(TR i.e putaway TO) ,Inspection lot is not getting updated in the quant due to which i am not able to convert PCN to TO
Because in quant i found previous inspection lot which is different from having in PCN document.
So is there any solution which will update the inspection lot in quant once we confirm TO(putaway TO) ?
Any help on this will be highly appreciated.
Regards,
OM

Hi jugen,
Thanks for you help but now i going for below development :
Once UD is done system will take the inspection lot from from the quant and will overwrite to the
newly created PCN
So that during PCN to TO creation (LU04) inspection lot will remain same both in quant and PCN .
Do you have any idea on this i mean where in QA32 tcode i have to write this logic ?
Thank you..
Regards,

Overhead is not getting updated in the production order

Hi all,
I am running actual overhead calculation with KGI2.
But the overheads are not getting updated in the order.
Order contains relevant overhead key also.
What could be the possible causes?
SmanS

Arun/ Suleman,
Thank you for your reply.
I have maintained the % in the costing sheet against the 'Overhead rate' but I didn't get the secondary cost element.
Request you to elaborate it further & explain me how to maintain the same.
Also I will be thankful to you, if you could explain me the exact process of loading the overhead on the order i.e. how it loads the overhead form the cost center to order? What happens to the total cost which was lying on the cost center etc, in details.
Mean while I had maintained the required values in costing sheet in KZS2.
Maintained the % against material overhead rate as well as manufacturing overhead rate.
Maintained the credit values for the overhead rate.
Maintained the calculation base values also.
Now while overhead calculation with KGI2, I am getting two errors as follows,
1. S:K5:162 E02 20090831
2. Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND for object
I can not figure out the reason.
SmanS
Edited by: SAP PP Consultant on Aug 10, 2009 6:47 AM

Mat doc not getting updated in AFRU table

Hi All,
While doing the confirmation cancellation for the rework order the referance material document is not getting updated in the AFRU table.
The referance operation set is used for the rework production order and there are no component assigned ,the components to be issued are entered at the time of confirmation.
The material document is getting updated in case of confirmation in AFRU table but the same is not getting updated in WABLNR field in case of cancellation of confirmation.
When I checked MSEG all the material documents are observed with referance to the order number but the same are not displayed in AUFM and AFRU table.
This behaviour is not obeserved in case of normal production orders. what can be the reason behind the same?
Regards
Ankush

Dear Ankush
please see FAQ note 540392 question 11.
11. Question:
Despite successful goods movements, the material document is not
updated in field AFRU-WABLNR. Where do I find the document number?
Answer:
As of Release 3.1H, the system provides the reference from
confirmation to material document via table AFWI. The system still
only uses AFRU-WABLNR in the case of header confirmations or
confirmations for an individual operation. With milestone
confirmations or with separate goods movements, in other words goods
movements that are posted in the update program or via requests
(BAPIs, collective entry, mass processing, BDC/PDC), table AFWI is
always supplied due to technical reasons.
BR Sabine

Open sales order not getting updated in FD32

HI
We are configuring Credit management, and found that the open sales orders are not getting updated in FD32.
I have checked all the settings in OVA8 and all are working fine. This is a Static credit check and system is blocking the customer in case, the limit is exceeded. But the values are not getting reflected in FD32, for open sale orders, that are not blocked.
Info structure S066 in OMO1 all are configured perfectly. I have run F.28 and no log was issued.
Request to suggest other reasons for not getting updated in the table.
I have gone thru the previous threads, but cud not find any solution.
Regards
Vamsi Javaji.

Hi Vamsi Javaji
First of all check in OVA8 wheather you have checked Open sales orders feild or not . Secondly check in your pricing procedure wheather you have maintained Subtotal A or not for the Net Value .Also check wheather you have assigned to your sales document type correctly or not Finally check in OMO1 wheather S066 has been assigned correctly or not
Check wheather you have assigned the Credit control area to the customer in CMR , in sales tab
Regards
Srinath

CCS Details are not getting updated to COPA in Sales Order Settlement(VA88)

Dear Experts,
Our scenario is MTO with valuated material.
1. Production order is tagged to Sales Order.
2. Production order is settled to Material and variance is getting posted to COPA.
3. At the time of Delivery, COGS Debit (Cost Object- Sales Order), Credit - Inventory.
4. At the time of Billing, Accounting Document is getting generated, COPA document is not getting generated.
5. We are not executing WIP. (as per Business process)
6. Settlement is done thru transaction code VA88. COPA Document is getting generated.
I am facing the following issues in the above MTO process.
1. At time of sales order settlement thru VA88, In COPA, only COGS is getting as updated with one value field i.e. Material Cost. Cost Component data (Material Depreciation, Labor etc..) is not getting updated to COPA.
2. When I settle the Sales Order thru VA88, Billing Quantity is not getting updated to COPA though Quantity field mapping is done properly.
Please help me how to resolve the above issues.
Note: Same Cost Component Structure, we are using for Make to Stock scenario. Cost Component Data is getting updated Properly to COPA (at the time of Billing)
Regards,
vgl
Edited by: vglokam on Aug 31, 2010 10:52 AM
Edited by: vglokam on Aug 31, 2010 10:54 AM

Hi
1. CCS (Cost Comp Split) wont be updated to COPA if you settle via sale order.. In sale order, COGS cost element is posted.. the same will get settled to COPA as one single value...
In MTS, the CCS gets updated to COPA upon billing because of the "valuation" strategy customization... Billing posts to COPA in that case, COPA gets Sales Qty and it is valuated with CCS to give you the break up.. But, in your case, Billing is not posting to COPA, but to sales order.. hence, there is no qty flow into COPA upon billing.. thats why you dont get CCS for MTO
2. The sales qty should be updated to COPA upon VA88.. For this, make the following settings in your PA transfer structure which is used during VA88
1. Go to KEI1, Select your PA transfer structure...
2. Add an assignment line in it... Check on "Qty Billed/Delivered" in the assignment line
3. In the Tab "Value Field" below "source", assign Qty Field
Now when you settle, it should update qty as well
regards
Ajay M

Serial number is not getting updated in GR

Problem: Serial number in not getting updated GR document (in stock) while going GR for production order.
We are using u201CBAPI_GOODSMVT_CREATEu201D to do production order GR in one development. And we have used serial number profile in which we kept GR as optional. Please fine details of serial number profile as below. We have a restriction that we can not make GR mandatory in serial number profile.
MMSL     Maintain goods receipt and issue doc.     02     02
PPAU     Serial numbers in PP order     02     01
PPRL     PP order release     04     01
PPSF     Serial nos in repetitive manufacturing     03     01
QMSL     Maintain inspection lot     02     01
SDAU     Serial numbers in SD order     01     01
SDCC     Completness check for delivery     02     01
SDCR     Completion check IR delivery     02     01
SDLS     Maintain delivery     02     01
SDRE     Maintain returns delivery     02     02
As we are passing serial number in BAPI while doing GR but still is not getting updated in GR document. When we check stock in MMBE, it is not showing any serial number.
Please suggest solution.
Thank you.

Hi Chetan,
Since your MMSL procedure is optional, you cannot carry assignment of Serial Numbers against goods Movement. Though you are passing serial numbers during GR, but Serial Numbers are linked only upto Production Order Level, not upto the Stock. The only option to display the Serial numbers against Stock can be done using MMSL procedure as 3. We also faced the similer situation, whenever ur doing automatic goods movement with MMSL as 02 [Auto GR], One possible solution, is to create a custom program to complete ur GR like using Call Transaction BDC -MB32, not as standard SAP Auto GR, & need to make MMSL as 3...so that both purpose gets served [ Serial number linking to stock & Automatic GR using custom program]
Please share, if you get any better idea
Krishna Kulkarni

Table control itab not getting updated.

Hi,
I have a table control created with the help of the wizard.
There are initailly no entries in the table and the user enters it during execution.
However the entries do not get updated in the internal table.
The modify statement below fails giving sy-subrc value 4.
MODIFY gt_bank_det_new
FROM gwa_bank_det_new
INDEX zbp_bank_dt_new-current_line.
Can you suggest what could be going wrong. There are no type mismatches and the table is a standard one.
Thanks in advance.
Arindam.

Hi
in PBO
Loop at itab with control tc.
endloop.
In PAI,
loop at gt_bank_det_new.
module modify_tab.
endloop.
in Program
module modify_tab
describe table itab lines tc-lines.
if tc-lines <= tc-current_line.
MODIFY itab FROM wa INDEX tc-current_line.
else.
append wa to itba.
endif.
endmodule.
Cheers
Ramchander Rao.K

SystemWideClassABPWP in RZ20 not getting updated

Hi All,
We need some help from you.
We have shortlisted the monitoring contexts in RZ20 around which we would like to configure our alerts in the system.
But just one concern, here in the monitoring tree under the monitoring tree Background, we have shortlisted SystemWideClassABPWP which tell the System Wide Class A Background Work Process across the instances.
But, we noticed that the value for this particular parameter is not getting updated (value 5 in the below screenshot).
The SystemWideClassABPWP and SystemWideTotalBPWP show inactive. This also seems to be non-modifiable (as per the legend in rz20)
Any clue as to how to activate them and update them with the latest value.
Thanks in advance and any pointers would be appreciated.
Warm Regards
Rajeet

Hi Michael,
Thanks a lot for your reply. But we find that these parameters are not getting updated and so we do not see the log like Green 06.03.2008 , 20:03:31 besides them (for other )
One more thing is we have 2 application servers (1 central instance & other application instance) with each having 5 work process for A priority jobs and 20 work processes for other jobs. So these parameters should show the values as
SystemWideClassABPWP - 10
SystemWideTotalBPWP - 40
But this is not the case. Also, when the operation mode changes these values are not getting updated.
Request your kind help in this regard.
Warm regards,
Rajeet

Matlab workspace not getting updated while labview mex file is running

Hi,
Let me start from the overview of the system for better understanding.
The system is to acquire data from a DAQ6070e using labview 7.1 . this data is then to be used in matlab for processing. All this needs to happen in real time hence the data is to be acquired from labview and outputted into matlab in real time.
in order to do this we generated the labview and the matlab codes seperately. After days of hard work we managed to import the labview vi into matlab using a math interface toolkit, but now have run into another interesting problem.
the workspace in matlab is not getting updated during the time the labview vi is running inside matlab. it only updates after the vi has run . for example if i need to monitor the system for 300 seconds then ideally the labview vi should output the samples for each acquisition and output it to matlab, what actually is happening is that the labview keeps running for 300 seconds without outputting any data during those 300 seconds and only outputs the last set of acquisition values at the end of the 300 seconds. Which beats the purpose of the whole program.
Kindly help
Regards
Manuj

Thanks Mate,
What you said about "MEX file will not be able to "store" data between runs" ,i realised in the morning. as a result i dont think your suggestion of for loop will also be effective as labview mex file will not acquire data during matalb code execution and vice versa.
Hence i have decided to do it the other way...we will now try to run the matlab code in labview.
this leads to other problem
As this is a real time operation i need to find out a way of storing the data into computer memory and then reading from it(when i say memory i do not mean writing it to a file and readin from it as that is slow) becasue i think the buffer i am specifying in my AI config is not big enough.
I was thinking maybe i should use a RT FIFO queue but then i have not been able to find out the difference between buffer memory and fifo memory. ie is buffer memory supposed to be the ram memory or is it the hard disk memory?
I am posting the vi here for easy understanding
All help is very much appreciated
Attachments:
RT-loop2ver21.vi ‏231 KB

ORDERS Inbound EDI1 Condition type not getting updated

Hi Experts,
As per the client requirement, during ORDERS Inbound process we need to capture the "Customer expected Price" in EDI1 Condition type in the sales order. So we maintained the details in the E1EDP01 in field VPREI.
But during ORDERS Inbound process this EDI1 field is not getting updated. Can anyone please help us on this.
Warm Regards,
VEL

Problem of our ABAP coding distrubed the std functionality. In std SAP, this functionality will work without any issue.

PSA Request not getting updated to DSO during Delta DTP

Similar Messages

Maybe you are looking for