PSADELETE process failure due to Internal Session Terminated.

Hi,
We have a PSADELETE process in Process chain which failed because of Internal Session Terminated error.
Now when i am trying to Repeat the process it is giving message Cannot activate job BI_PROCESS_PSADELETE (return code 8)
and the process is not starting again.
Please guide me the solution.
Thanks
Singh

Can you check for more details in SM37 for the cancelled job log .
Do you have authorization to run 'repeat step ' ?
or display psadelete variant - identify the infopack/psa tables->  u can delete manually psa requests
Edited by: Srinivas on Jul 18, 2010 5:22 PM

Similar Messages

  • Internal session terminated with a runtime error(ITAB_DUPLICATE_KEY)

    Hi All,
    Process Chain is failing While loading data from ODS to Cube iam getting error in DTP level internal session terminated with a runtime error(ITAB_DUPLICATE_KEY).Here my source is CRM.
    Can you please suggest me for this issue.
    Thanks,
    Mahes.

    hi Maheesh,
    Runtime Error ITAB_DUPLICATE _KEY is resulted because of Duplicate Transfer Structures from different Logical Systems.
    You can find the corresponding entries in the table RSISOSMAP ..On executing,we have the option to give the InfoSource name(ISOURCE) for wich the data load got failed with Runtime Error ITAB_DUPLICATE_KEY..
    You can coreect this error by running the Program RSAR_RSISOSMAP_REPAIR in repair mode , the program first checks the RSISOSMAP table and corrects any incorrect entries found. A log is then written for the mappings that were corrected.
    This will solve your problem.
    Please refer to link mention in above thread for more detail i have just summarize the things :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a04c82eb-ec7c-2c10-7fae-ca6e764c483a?QuickLink=index&overridelayout=true
    Thanks,
    Deepak

  • DTP run Time Error : Dump: Internal session terminated with a runtime error

    Hi Experts,
    I'm facing a problem during loading data from PSA to DSO from DTP. It gives Dump: "Internal session terminated with a runtime error".
    When i went to PSA and see the no. of data packages, it is 1532.
    Could anybody please help me how to load the data.
    Thanks
    Ajay

    Thanks Srini!!
    the load is running for 15 min and then it is throwing dump without a single package extract.
    Ok...the same I'm also thinking to selective upload but can you please explain me how do i do that as it has only request in PSA.
    and it is a pricing data.
    Thanks
    Ajay

  • Regarding Internal Session Termination

    Hi Friends,
    I have to end a particular internal session (Planning Area in my case) of the other user  after a specific time,  who is in change mode through a background job.If I use the function module u201CTH_DELETE_USERu201D,it is closing all the sessions of that user.But my requirement is to close only u2018SDPu2019 session without closing others.How can I do this?
    I tried to delete  based on mode number  using function module u201CTH_DELETE_MODEu201D,but each time mode number  is getting changed based on the sessions opened, so I am not  even able to use thatu2026.Please suggest me any function module or bapi which meets the requirementu2026
    Thanks in advance u2026u2026

    Hi,
    check fm : TH_USER_LIST.
    Check this sample code provided in 1 forum.
    DATA: USRTAB LIKE UINFO OCCURS 1 WITH HEADER LINE,
    MODE TYPE I,
    OPCODE TYPE X.
    CALL FUNCTION 'THUSRINFO'
    TABLES
    USR_TABL = USRTAB.
    LOOP AT USRTAB WHERE BNAME = SY-UNAME.
    IF USRTAB-TCODE = 'ME23'.
    OPCODE = 25.
    CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE
    ID 'TID' FIELD USRTAB-TID.
    ENDIF.
    ENDLOOP.
    Hope this helps to solve ur issue.
    Thanks & regards.

  • How to Configure alert for process failures

    Hi Friends.
    How to Configure alert for process failures due to any reasons like mapping, runtime exceptions .
    I am devloping one scenario which is file to flatfile. In this scenario I am also using mail adapter for sending mail daily to admin that tells about record size and no of records parallely. I am not using BPM in this scenario.
    I am having very little experience in XI.
    Please answer this with clear steps so that I can do it.

    hi,
    check the links below for all the details and help on configuring alerts
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b - How to setup alerts for monitoring in XI 3.0
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5 - Monitoring in XI 3.0
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - XI: Alerts configuration - Step by step
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - XI: Alerts - Troubleshooting guide
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    /people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi

  • ERROR MESSAGE sap system manager:work process restarted, session terminated

    Hi,
    i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
    SAP Version :ideas 4.7
    Database :Oracle
    OS : windows 2003
    Module user is working on MM
    user working on it is a Super user with all the permissions
    SAP is configure to run under the  European date and decimal format.
    I have never done any database administration on it, it is a new install and has been rarely used.
    User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
    Below are the details of the error message from ST22 :
    name of the runtime error : system_core_dumped
    below are the details of the error message and its resoltion as suggested by sap help :
    ========
    Runtime Errors         SYSTEM_CORE_DUMPED           
           Occurred on     01.02.2008 at 07:52:19
    Process terminated by signal " ".                                             
    What happened?
    The current ABAP program had to be terminated because the                     
    ABAP processor detected an internal system error.                             
    The current ABAP program "SAPLCLSC" had to be terminated because the ABAP     
    processor discovered an invalid system state.                                 
    What can you do?
                                                                                    Make a note of the actions and input which caused the error.                                                                               
    To resolve the problem, contact your SAP system administrator.                                                                               
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer      
    termination messages, especially those beyond their normal deletion           
    date.                                                                               
    Error analysis
    An SAP System process was terminated by an operating system signal.           
                                                                                    Possible reasons for this are:                                                
    1. Internal SAP System error.                                                 
    2. Process was terminated externally (by the system administrator).           
               Last error logged in SAP kernel                                    
                                                                                    Component............ "Taskhandler"                                           
    Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"      
    Version.............. 1                                                       
    Error code........... 11                                                      
    Error text........... "ThSigHandler: signal"                                  
    Description.......... " "                                                     
    System call.......... " "                                                     
    Module............... "thxxhead.c"                                            
    Line................. 9555                                                                               
    How to correct the error
    The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often             
    contains a file called 'core'.                                                                               
    Save this file under another name.                                                                               
    If you cannot solve the problem yourself, please send the                     
    following documents to SAP:                                                                               
    1. A hard copy print describing the problem.                                  
       To obtain this, select the "Print" function on the current screen.         
                                                                                    2. A suitable hardcopy prinout of the system log.                             
       To obtain this, call the system log with Transaction SM21                  
       and select the "Print" function to print out the relevant                  
       part.                                                                               
    3. If the programs are your own programs or modified SAP programs,            
       supply the source code.                                                    
       To do this, you can either use the "PRINT" command in the editor or        
       print the programs using the report RSINCL00.                                                                               
    4. Details regarding the conditions under which the error occurred            
       or which actions and input led to the error.                                                                               
    System environment
    SAP Release.............. " "                                                                               
    Application server....... " "                                                 
    Network address.......... " "                                                 
    Operating system......... " "                                                 
    Release.................. " "                                                 
    Hardware type............ " "                                                 
    Character length......... " " Bits                                            
    Pointer length........... " " Bits                                            
    Work process number...... " "                                                 
    Short dump setting....... " "                                                                               
    Database server.......... " "                                                 
    Database type............ " "                                                 
    Database name............ " "                                                 
    Database owner........... " "                                                                               
    Character set............ " "                                                                               
    SAP kernel............... " "                                                 
    Created on............... " "                                                 
    Created in............... " "                                                 
    Database version......... " "                                                                               
    Patch level.............. " "                                                 
    Patch text............... " "                                                                               
    Supported environment....                                                     
    Database................. " "                                                 
    SAP database version..... " "                                                 
    Operating system......... " "                                                 
    User, transaction...
    Client.............. " "                                                      
    User................ " "                                                      
    Language key........ " "                                                      
    Transaction......... "ME41 "                                                  
    Program............. "SAPLCLSC"                                               
    Screen.............. "SAPMM06E 0320"                                          
    Screen line......... 71                                                       
    Information on where termination occurred
    The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".  
    The main program was "SAPMM06E ".                                                                               
    The termination occurred in line 131 of the source code of the (Include)      
    program "LCLSCF2G"                                                           
    of the source code of program "LCLSCF2G" (when calling the editor 1310).      
    =============
    i even tried increasing the dialog processes but with no use.The same error occurs.
    I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
    thanks
    mudessir.

    Hi
       follow correction method suggested in this dump,
    " The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
    contains a file called 'core'.  Save this file under another name."
    have you done this?
    with regards,
    raj.
    <i>pls, award points</i>

  • Logon failure due to an internal error

    Hi,
    We have installed XI 3.1 SP3 (plus fixpacks) on a server and I am trying to access Web Intelligence on the client machine. I get the error "Logon failure due to an internal error." Any ideas what the problem may be?
    I can login into Web Intelligence when on the server directly using remote desktop. I am on SP3 on the client machine but may not be on the same level for fixpacks - will check. Could that be the problem?
    I can access the CMC from the client machine.
    Thanks

    Hi All,
      I'll start by describing the basic logon connections made by all the client tools when connecting to a Business Objects CMS.  From this hopefully it will help resolve the kind of issues described here.
    ------------------Background------------------
      The CMS has a port number (6400).  This port number is actually the port number of the name server.  This name server stores the name, type of server, hostname and port for all the BusinessObjects servers that exist in the cluster.  Whenever a program (such as a client tool) needs to know how to connect to a particular server, the name server will reply with the hostname (or IP) and port number to connect to.  When each Business Objects server process starts it will register with the name server and tell it what its connection info (hostname and port) are.
      In the case of a client logon it will first connect to the name server and then request the information to connect to the CMS service - (note that the name server and the CMS service are two logicial and seperate functions that the CMS process performs).  The CMS service actually runs on the request port of the CMS.
    ------------------Cause of Logon Failures------------------
      If you have no explicitly configured it, the hostname returned for connection could be the fully qualified name OR the short hostname of the machine and the port number will be random (and change each time the process is started).  The client ALSO needs to be able to connect to the hostname and port returned by the name server to continue processing.  If it can't then you will receive a logon error - in designer/desktop intelligence this will appear as a 'Transport Communication Error' in the deatils of the error message.
    ------------------Example------------------
      You initially connect to boeserver.mycomp.com:6400.  boeserver.mycomp.com is a DNS name that the client computer can resolve and the port 6400 is open through the firewall.  The client connects to the name server (within the CMS process) and requests the connection information for the CMS services but these have not been explicitly set in the CMC->Server->CMS->Properties page.
      The response from the nameserver might be to connect to the short name of the host: boeserver on port 54393 (or some other random port number).  You will get a logon error if EITHER the hostname boeserver cannot be resolved (which can be quite common when the boeserver machine is in a different subnet) OR there is a firewall blocking the connection port (54393 in this case).
    ------------------Resolution------------------
    Go to the CMC->Server->CMS->Properties page.  Here there is a section where you can specify the hostname with with each business objects server will give as the hostname (or IP address) and port (request port) that it can be contacted on. In the example below I have said that it should be contacted on the fullyqualified name and on port 6401.  Again 6401 would need to be open through the firewall.
    No two servers can have the same request port.  As you can see in the screenshot I have specified to connect to the CMS service on 6401 using the fullyqualified hostname boeserver.mycomp.com and finally that the name server port is the default 6400.
    As mentioned previously there may be also other BOE servers that similar settings are required for, depending on the actions you are performing - e.g. IDT and designer need access to the input file repository server to input/export universes, WebiRich Client also should have access to the Output File Repository Server.  Client tools should also have access to the Adaptive Processing Server that is running the Client Auditing Proxy Service so that any actions are audited.
    One extra thing that can cause a block on the port number, other than a regular corporate firewall is the security on the server machine itself (e.g. the Windows firewall on the server can block incoming requests if there is not an expection created.
    Regards,
    Graham

  • Work process re-started , session terminated

    Hi Gurus,
    While i creating a purchase order (me21n) , the process runs for a while and then i am getting a SAP GUI message "Work process re - started , session terminated" and the session is closed.Can anyone give me the cause of the problem and solution for the same.
    Developers Trace File Entry:
    trc file: "dev_w0", trc level: 1, release: "640"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    B B Fri Aug 31 16:09:36 2007
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' ...
    B  Library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' loaded
    B  Version of 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.26)
    B  New connection 0 created
    M systemid   560 (PC with Windows NT)
    M relno      6400
    M patchlevel 0
    M patchno    25
    M intno      20020600
    M make:      multithreaded, ASCII
    M pid        1680
    M
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1680) [dpxxdisp.c   1160]
    I  MtxInit: -2 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: JAVA is not active
    M  DpShMCreate: sizeof(wp_adm)        7456    (828)
    M  DpShMCreate: sizeof(tm_adm)        2219848    (11044)
    M  DpShMCreate: sizeof(wp_ca_adm)        18000    (60)
    M  DpShMCreate: sizeof(appc_ca_adm)    6000    (60)
    M  DpShMCreate: sizeof(comm_adm)        192000    (384)
    M  DpShMCreate: sizeof(vmc_adm)        0    (320)
    M  DpShMCreate: sizeof(wall_adm)        (22440/34344/56/100)
    M  DpShMCreate: SHM_DP_ADM_KEY        (addr: 05230040, size: 2506248)
    M  DpShMCreate: allocated sys_adm at 05230040
    M  DpShMCreate: allocated wp_adm at 052317A8
    M  DpShMCreate: allocated tm_adm_list at 052334C8
    M  DpShMCreate: allocated tm_adm at 052334F0
    M  DpShMCreate: allocated wp_ca_adm at 05451438
    M  DpShMCreate: allocated appc_ca_adm at 05455A88
    M  DpShMCreate: allocated comm_adm_list at 054571F8
    M  DpShMCreate: allocated comm_adm at 05457210
    M  DpShMCreate: allocated vmc_adm_list at 05486010
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 05486038
    M  DpShMCreate: allocated wall_adm at 05486040
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    M  <EsNT> Memory Reset enabled as NT default
    X  ES initialized.
    M M Fri Aug 31 16:09:37 2007
    M  calling db_connect ...
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      26
    C    patchcomment MSSQL: GetNextMsst1 error (754819)
    C  np:(local) connection used on IDES
    C  Using Provider SQLNCLI
    C  Provider Release:9.00.1399.06
    C  Using Provider SQLNCLI
    C C Fri Aug 31 16:09:41 2007
    C  Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5432000 bytes), total 32152052 bytes
    C  Using shared procedure name cache IDES_I04I04_I04_MEM initialized by another process.
    C  Connected to db server : [IDES] server_used : [np:(local)], dbname: I04, dbuser: i04
    C  pn_id:IDES_I04I04_I04
    B  Connection 0 opened
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT MAX OPT Date     Time   DBHost         B  000 000 R/3              000000000 ACTIVE       NO  YES NO  255 255 20070831 160937 IDES           C  The IRow interface is supported by this OLEDB provider
    M  db_connect o.k.
    I I Fri Aug 31 16:09:53 2007
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF            (addr: 098E0040, size: 4400128)
    M  SHM_ROLL_AREA        (addr: 68200040, size: 160432128)
    M  SHM_PAGING_AREA        (addr: 09D20040, size: 72351744)
    M  SHM_ROLL_ADM            (addr: 0E230040, size: 1602056)
    M  SHM_PAGING_ADM        (addr: 0E3C0040, size: 525344)
    M  ThCreateNoBuffer        allocated 320144 bytes for 1000 entries at 0E450040
    M  ThCreateNoBuffer        index size: 3000 elems
    M  ThCreateVBAdm        allocated 7424 bytes (50 server) at 0E4A0040
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 9
    B  dbtbxbuf: Buffer TABL  (addr: 134C00C8, size: 30000128, end: 1515C4C8)
    B  dbtbxbuf: Buffer TABLP (addr: 0F3000C8, size: 10240000, end: 0FCC40C8)
    B  dbexpbuf: Buffer EIBUF (addr: 151600D0, size: 4194304, end: 155600D0)
    B  dbexpbuf: Buffer ESM   (addr: 155700D0, size: 4194304, end: 159700D0)
    B  dbexpbuf: Buffer CUA   (addr: 0FCE00D0, size: 3072000, end: 0FFCE0D0)
    B  dbexpbuf: Buffer OTR   (addr: 159800D0, size: 4194304, end: 15D800D0)
    M  rdisp/reinitialize_code_page -> 0
    M  icm/accept_remote_trace_level -> 0
    C C Fri Aug 31 16:09:54 2007
    C  Using Provider SQLNCLI
    C  The IRow interface is supported by this OLEDB provider
    S S Fri Aug 31 16:09:55 2007
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 15EFFBD0
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 1DF30098
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 1DF302C8
    S    using messages for server info
    S  size of spec char cache entry: 165020 bytes (timeout 100 sec)
    S  size of open spool request entry: 1152 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A A  -PXA--
    A  PXA INITIALIZATION
    A  PXA: Fragment Size too small: 195 MB, reducing # of fragments
    A  System page size: 4kb, admin_size: 11476kb.
    A  Attached to PXA (address 24550040, size 400000K)
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A A A Fri Aug 31 16:09:56 2007
    A  ABAP ShmAdm attached (addr=56AF9000 leng=20955136 end=57EF5000)
    A  >> Shm MMADM area (addr=56E610E0 leng=134752 end=56E81F40)
    A  >> Shm MMDAT area (addr=56E82000 leng=17248256 end=57EF5000)
    A  RFC Destination> destination ides_I04_00 host ides system I04 systnr 0 (ides_I04_00)
    A  RFC Options> H=ides,S=00
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 1
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    A  Hotpackage version: 38
    M  ThrCreateShObjects        allocated 9394 bytes at 0FFD0040
    N  SsfSapSecin: putenv(SECUDIR=C:\usr\sap\I04\DVEBMGS00\sec): ok
    N N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is C:\usr\sap\I04\SYS\exe\run\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...sucessfully completed.
    N  =================================================
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    W  =================================================
    W  === ipl_Init() called
    W    ITSP Running against db release 620!
    W    ITSP Disable Kernel Web GUI functionality
    W  === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
    W  =================================================
    B B Fri Aug 31 16:10:05 2007
    B  dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
    B   max_blocking_factor =  50,  max_in_blocking_factor      = 255,
    B   min_blocking_factor =   5,  min_in_blocking_factor      =  10,
    B   prefer_union_all    =   1,  prefer_union_for_select_all =   0,
    B   prefer_fix_blocking =   0,  prefer_in_itab_opt          =   0,
    B   convert AVG         =   1,  alias table FUPD            =   0,
    B   escape_as_literal   =   0,  opt GE LE to BETWEEN        =   0,
    B   select *            =0x00,  character encoding          =SBCS / []:X,
    B   use_hints           = abap->1, dbif->0x1, upto->0, rule_in->0,
    B                         rule_fae->0, concat_fae->0, concat_fae_or->0
    I I Fri Aug 31 16:10:10 2007
    I  MPI<c>9#3 Peak buffer usage: 5 (@ 64 KB)
    S  server @>SSRV:ides_I04_00@< appears or changes (state 1)
    S  server @>SSRV:ides_I04_00@< appears or changes (state 1)
    S  server @>SSRV:ides_I04_01@< appears or changes (state 1)
    E E Fri Aug 31 16:10:11 2007
    E  Replication is disabled
    N N Fri Aug 31 16:10:28 2007
    N  login/password_change_for_SSO : 1 -> 1
    B B Fri Aug 31 16:10:38 2007
    B  table logging switched off for all clients
    B B Fri Aug 31 16:10:41 2007
    B  dbmyclu : info : my major identification is 3232245831, minor one 0.
    B  dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
    B  dbmyclu : info : my uuid is 96AAC2654435DC46AFA4C31629BE366F.
    B  dbmyclu : info : current optimistic cluster level: 3
    B  dbmyclu : info : pessimistic reads set to 2.
    S S Fri Aug 31 16:15:55 2007
    S  found spool memory service RSPO-ACTIONS at 1DF34B50
    M M Fri Aug 31 16:20:14 2007
    M  call semaphore clean-up function ...
    M  ***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c   462]
    M  -
    C-STACK -
    SAP (R) - R/3(TM) Callstack, Version 1.0
    Copyright (C) SAP AG. All rights reserved.
    Application exception occurred:
    Exception : c0000005 (Access Violation)
    App       : disp+work.EXE (pid=1680)
    When      : 8/31/2007 16:20:14.837
    Threads   : 2
    Computer Name       : IDES
    User Name           : SAPServiceI04
    Number of Processors: 2
    Processor Type: x86 Family 15 Model 6 Stepping 4
    Windows Version     : 5.2 Current Build: 3790
    State Dump for Thread Id 9cc
    eax=00000000 ebx=00000000 ecx=00000014 edx=00000000 esi=003860ec edi=003860c0
    eip=7c82ed54 esp=0300daa8 ebp=0300dab8 iopl=0         nv up ei pl nz ac pe nc
    cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000212
    function : MmxFree2
           00f35dde 2b0568e59701  sub eax,[MmxUheaderSz (0197e568)] ds:0197e568=00000010
           00f35de4 50               push    eax
           00f35de5 68dd000000       push    0xdd
           00f35dea ffb4246c010000   push    dword ptr [esp+0x16c]  ss:0300dc14=7c82f9dd
           00f35df1 e890ac1200       call    memset (01060a86)
           00f35df6 83c40c           add     esp,0xc
           00f35df9 8b4308           mov     eax,[ebx+0x8]          ds:0300d006=2bf38b08
           00f35dfc 8bf3             mov     esi,ebx
           00f35dfe 2b730c           sub     esi,[ebx+0xc]          ds:0300d006=2444890c
           00f35e01 89442418         mov     [esp+0x18],eax         ss:0601aaaf=00000000
    FAULT-> 00f35e05 f60601           test    byte ptr [esi],0x1           ds:003860ec=08
           00f35e08 7513             jnz     MmxFree2+0x4cf (00f35e1d)
           00f35e0a 8bce             mov     ecx,esi
           00f35e0c e814a7ffff       call    MmxIBlockRemove (00f30525)
           00f35e11 8b4308           mov     eax,[ebx+0x8]          ds:0300d006=08460108
           00f35e14 014608           add     [esi+0x8],eax          ds:033930f2=00000000
           00f35e17 89742414         mov     [esp+0x14],esi         ss:0601aaaf=00000000
           00f35e1b 8bde             mov     ebx,esi
           00f35e1d 8b7308           mov     esi,[ebx+0x8]          ds:0300d006=f6f30308
           00f35e20 03f3             add     esi,ebx
           00f35e22 f60601           test    byte ptr [esi],0x1           ds:003860ec=08
           00f35e25 750d             jnz     MmxFree2+0x4e6 (00f35e34)
    --> Stack Back Trace <--
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    0300e648 00746014 3cc00548 3d07d010 06751220 00000000 disp+work!MmxFree2 [mmxx.c (2440)]
    0300e668 006450a7 00000000 00000001 3cc88e78 3cc485e8 disp+work!ab_sqlsclose [absapsql.c (8104)]
    0300e690 006466c6 00000013 00750af1 00000000 000000cd disp+work!ab_popbst [abstacks.c (4763)]
    0300e698 00750af1 00000000 000000cd 00000000 01c720fa disp+work!ab_poprsql [abstacks.c (1167)]
    0300e6cc 006e0f51 00000000 3d170778 00000000 00f00105 disp+work!ab_jsqls [absapsql.c (1306)]
    0300e770 00766be4 3d1715b3 3d170778 00000000 01afb3a4 disp+work!ab_extri [abextri.c (431)]
    0300e784 007ebf1c 00000000 7c36a42b 000004b6 00571b1a disp+work!ab_xevent [abrunt1.c (261)]
    0300e794 00571b1a 3d171080 0000002e 3d170778 3d17139a disp+work!ab_dstep [abdynpro.c (460)]
    0300e7bc 005740de 3d170778 3d170778 7c36a42b 00000000 disp+work!dynpmcal [dymainstp.c (2312)]
    0300e7d4 00573680 3d17139a 3d170778 00000003 0300fdcc disp+work!dynppai0 [dymainstp.c (1043)]
    0300e7f0 00549340 3d170778 00000002 00000001 00000000 disp+work!dynprctl [dymainstp.c (350)]
    0300fdcc 004747f4 00000002 0300fe74 00000001 00497626 disp+work!dynpen00 [dymain.c (1375)]
    0300fddc 00497626 00000002 00000000 003860a8 00000002 disp+work!Thdynpen00 [thxxhead.c (4353)]
    0300feec 004979e0 00000001 7ffd4000 00000000 00000000 disp+work!TskhLoop [thxxhead.c (4117)]
    0300ff04 00421d07 00000000 00000000 0300ff60 00401059 disp+work!tskhstart [thxxhead.c (1038)]
    0300ff14 00401059 00000003 003860a8 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1009)]
    0300ff60 01060bcf 00000003 003860a8 003828f8 0152d000 disp+work!main [thxxanf.c (58)]
    0300ffc0 77e523e5 00000000 00000000 7ffd4000 80a56be3 disp+work!mainCRTStartup [crtexe.c (398)]
    0300fff0 00000000 01060a8c 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
    State Dump for Thread Id d2c
    eax=0000005e ebx=00000103 ecx=00000010 edx=000719bb esi=00000000 edi=00000000
    eip=7c82ed54 esp=04a1feb0 ebp=04a1fef4 iopl=0         nv up ei pl zr na po nc
    cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000246
    function : KiFastSystemCallRet
           7c82ed54 c3               ret
           7c82ed55 8da42400000000   lea     esp,[esp]              ss:04a1feb0=7c821514
           7c82ed5c 8d642400         lea     esp,[esp]              ss:07a2ceb7=????????
    --> Stack Back Trace <--
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    04a1fef4 00fc37ec 000006ac 00000000 00000000 0038cd48 ntdll!KiFastSystemCallRet
    04a1ff84 7c349565 00000000 00000000 00000000 0038cbd0 disp+work!SigIMsgFunc [signt.c (559)]
    04a1ffb8 77e6608b 0038cbd0 00000000 00000000 0038cbd0 MSVCR71!endthreadex
    04a1ffec 00000000 7c3494f6 0038cbd0 00000000 00000000 kernel32!GetModuleFileNameA
    M  -
    M M Fri Aug 31 16:20:16 2007
    M  call clean-up function ...
    M  in_ThErrHandle: 1
    M  ThSigHandler: signal (step 4, th_errno 11, action 4)
    M M  Info for wp 0
    M M    stat = 4
    M    reqtype = 1
    M    act_reqtype = 1
    M    rq_info = 0
    M    tid = 9
    M    mode = 0
    M    len = 787
    M    rq_id = 423
    M    rq_source = 1
    M    last_tid = 9
    M    last_mode = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M M  Modeinfo for User T9/M0
    M M    tm state = 2
    M    uid = 13
    M    term type = 0x4
    M    display = 0x8
    M    cpic_no = 0
    M    cpic_idx = -1
    M    usr = >ABAP1       <
    M    terminal = >DDDC393             <
    M    client = >120<
    M    conversation_ID = >        <
    M    appc_tm_conv_idx = -1
    M    imode = 1
    M    mode state = 0x12
    M    task_type = ZTTADIA
    M    th_errno = 11
    M    rollout_reason = 1
    M    last_rollout_level = 7
    M    async_receives = 0
    M    cpic_receive = 0
    M    em handle = 0
    M    roll state = 4
    M    abap state = 4
    M    em state = 3
    M    eg state = 1
    M    spa state = 3
    M    enq state = 0
    M    next hook = T-1/U-1/M255
    M    master hook = T-1/U-1/M255
    M    slave hook = T-1/U-1/M255
    M    debug_tid = 255
    M    debug_mode = 0
    M    mode type = 0x1
    M    debug = 0
    M    tcode = >ME21N               <
    M    client conversation_ID = >        <
    M    server conversation_ID = >        <
    M    lock = 0
    M    max enq infos = 9
    M    act enq infos = 2
    M    em_hyper_hdl = 57F03BD8
    M    plugin_info = NULL
    M    act_plugin_hdl = -1
    M    act_plugin_no  = 0
    M    max_plugin_no  = 0
    M M  Adresse   Offset  Data from input buffer
    M  -
    M  054A7D70  000000  00000000 00000000 01502700 00000000 |.........P'.....|
    M  054A7D80  000016  00000000 0000009f 74100623 00170000 |........t..#....|
    M  054A7D90  000032  04880131 31363000 77696e64 6f77732d |...1160.windows-|
    M  054A7DA0  000048  31323532 00100409 00033731 3010041d |1252......710...|
    M  054A7DB0  000064  00013010 040f0004 000012ad 10041900 |..0.............|
    M  054A7DC0  000080  02000010 05010016 000d0000 000d002b |...............+|
    M  054A7DD0  000096  a1001fa2 00000000 00000000 0000100c |................|
    M  054A7DE0  000112  08001000 00029f00 00047400 00029f00 |..........t.....|
    M  054A7DF0  000128  00047410 0a010009 00000000 00000000 |..t.............|
    M  054A7E00  000144  00100a03 00090100 00000000 78001f10 |............x...|
    M  054A7E10  000160  0a030009 03000900 00007800 0a100a03 |..........x.....|
    M  054A7E20  000176  00090200 00000300 75000a10 0a030009 |........u.......|
    M  054A7E30  000192  01000000 00007500 0a100a05 00090100 |......u.........|
    M  054A7E40  000208  00000000 75000910 090e00c8 00c80000 |....u...........|
    M  054A7E50  000224  00000075 00090000 23000700 0200000c |...u....#.......|
    M  054A7E60  000240  01000000 00002300 82003c00 00000003 |......#...<.....|
    M  054A7E70  000256  00070000 00070000 00000000 00000000 |................|
    M  054A7E80  000272  00000000 00000000 00020005 00020002 |................|
    M  054A7E90  000288  000c0014 00110003 0001000a 000e0005 |................|
    M  054A7EA0  000304  00060003 000a000f 000c0008 000a000c |................|
    M  054A7EB0  000320  000c0008 00030003 0002000a 0005000a |................|
    M  054A7EC0  000336  0005000a 0005000a 00050005 00011100 |................|
    M  054A7ED0  000352  11001100 11001100 11001100 11001100 |................|
    M  054A7EE0  000368  11001100 11001100 11001100 11001100 |................|
    M  054A7EF0  000384  11001100 11001100 11001100 11001100 |................|
    M  054A7F00  000400  11001100 11001100 11001100 11001100 |................|
    M  054A7F10  000416  11001100 100c0200 18000000 07000000 |................|
    M  054A7F20  000432  23000000 07000000 00000000 00000000 |#...............|
    M  054A7F30  000448  00100909 00180001 00077920 20202020 |..........y     |
    M  054A7F40  000464  20202020 20202020 31303030 0000100a |        1000....|
    M  054A7F50  000480  01000900 00000000 00000000 100a0300 |................|
    M  054A7F60  000496  09010000 00000078 001f100a 03000902 |.......x........|
    M  -
    M M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server ides_I04_00 on host ides (wp 0)
    M  *  ERROR       ThSigHandler: signal
    M  *
    M  *  TIME        Fri Aug 31 16:20:16 2007
    M  *  RELEASE     640
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          11
    M  *  MODULE      thxxhead.c
    M  *  LINE        9555
    M  *  COUNTER     3
    M  *
    M  *****************************************************************************
    M M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
    M  TrThHookFunc: called for WP dump
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  ThrSaveSPAFields: save spa fields
    M  Entering ThSetStatError
    C  SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was set. rc: 1 BREAK_REQUESTED
    M  ThIErrHandle: don't try rollback again
    M  ThIErrHandle: call ThrCoreInfo
    M  ThDelEnqInfo: del enq_own >20070831161118747000000000ides............................</1
    M  ThDelEnqInfo: act enq info: 1
    M  ThDelEnqInfo: del enq_own >20070831161118747000010000ides............................</2
    M  ThDelEnqInfo: act enq info: 0
    A  TH VERBOSE LEVEL FULL
    C Fri Aug 31 16:20:17 2007
    C  SQLBREAK: BREAK_REQUESTED upgraded to BREAK_IN_PROGRESS sloledb.cpp 4187
    M Fri Aug 31 16:20:18 2007
    M  SosSearchAnchor: search anchor for 4
    M  ThIErrHandle: Entering ThReplyToMsg
    M  ThIErrHandle: Entering ThErrHdlUser
    M  ThErrHdlUser: set th_errno (11)
    M  ThErrHdlUser: save context
    M  ThSaveContext: roll out
    M  ThRollOut: roll out T9/U13/M0 (level=7, short_roll_out=0)
    M  ThRollOut: call rrol_out (1)
    M  ThRollOut: act roll state = DP_ROLLED_OUT
    M  ThRollOut: roll level <> 0, don't call ab_rollout
    M  ThRollOut: full roll out of U13 M0 I1 (Level 7) ok
    M  ThCheckEmMagic: check em magic at 3CC00A80 for T9/M0/I1
    M  ThCheckEmMagic: em magic at 3CC00A80 for T9/M0/I1 o.k.
    M  ThEmContextDetach2: detach T9/M0 from em memory (em_hdl=0, force=0)
    M  ThEmContextDetach2: reset local em info
    B  Disconnecting from ALL connections:
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT MAX OPT Date     Time   DBHost         B  000 000 R/3              000000000 ACTIVE       YES YES NO  255 255 20070831 160937 IDES           C  Rollback Work (0)
    B  Disconnected from connection 0
    B  statistics db_con_commit (com_total=149, com_tx=34)
    B  statistics db_con_rollback (roll_total=1, roll_tx=0)
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 1680) [dpnttool.c   357]
    M  return from clean-up function ...
    trc file: "dev_w0", trc level: 1, release: "640"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    B B Fri Aug 31 16:20:36 2007
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' ...
    B  Library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' loaded
    B  Version of 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.26)
    B  New connection 0 created
    M systemid   560 (PC with Windows NT)
    M relno      6400
    M patchlevel 0
    M patchno    25
    M intno      20020600
    M make:      multithreaded, ASCII
    M pid        2460
    M
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2460) [dpxxdisp.c   1160]
    I  MtxInit: -2 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: JAVA is not active
    M  DpShMCreate: sizeof(wp_adm)        7456    (828)
    M  DpShMCreate: sizeof(tm_adm)        2219848    (11044)
    M  DpShMCreate: sizeof(wp_ca_adm)        18000    (60)
    M  DpShMCreate: sizeof(appc_ca_adm)    6000    (60)
    M  DpShMCreate: sizeof(comm_adm)        192000    (384)
    M  DpShMCreate: sizeof(vmc_adm)        0    (320)
    M  DpShMCreate: sizeof(wall_adm)        (22440/34344/56/100)
    M  DpShMCreate: SHM_DP_ADM_KEY        (addr: 05230040, size: 2506248)
    M  DpShMCreate: allocated sys_adm at 05230040
    M  DpShMCreate: allocated wp_adm at 052317A8
    M  DpShMCreate: allocated tm_adm_list at 052334C8
    M  DpShMCreate: allocated tm_adm at 052334F0
    M  DpShMCreate: allocated wp_ca_adm at 05451438
    M  DpShMCreate: allocated appc_ca_adm at 05455A88
    M  DpShMCreate: allocated comm_adm_list at 054571F8
    M  DpShMCreate: allocated comm_adm at 05457210
    M  DpShMCreate: allocated vmc_adm_list at 05486010
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 05486038
    M  DpShMCreate: allocated wall_adm at 05486040
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    M  <EsNT> Memory Reset enabled as NT default
    X  ES initialized.
    M M Fri Aug 31 16:20:37 2007
    M  calling db_connect ...
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      26
    C    patchcomment MSSQL: GetNextMsst1 error (754819)
    C  np:(local) connection used on IDES
    C  Using Provider SQLNCLI
    C  Provider Release:9.00.1399.06
    C C Fri Aug 31 16:20:38 2007
    C  Using Provider SQLNCLI
    C  Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5432000 bytes), total 32152052 bytes
    C  Using shared procedure name cache IDES_I04I04_I04_MEM initialized by another process.
    C  Connected to db server : [IDES] server_used : [np:(local)], dbname: I04, dbuser: i04
    C  pn_id:IDES_I04I04_I04
    B  Connection 0 opened
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT MAX OPT Date     Time   DBHost         B  000 000 R/3              000000000 ACTIVE       NO  YES NO  255 255 20070831 162037 IDES           C  The IRow interface is supported by this OLEDB provider
    M  db_connect o.k.
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF            (addr: 098E0040, size: 4400128)
    M  SHM_ROLL_AREA        (addr: 68200040, size: 160432128)
    M  SHM_PAGING_AREA        (addr: 09D20040, size: 72351744)
    M  SHM_ROLL_ADM            (addr: 0E230040, size: 1602056)
    M  SHM_PAGING_ADM        (addr: 0E3C0040, size: 525344)
    M  ThCreateNoBuffer        allocated 320144 bytes for 1000 entries at 0E450040
    M  ThCreateNoBuffer        index size: 3000 elems
    M  ThCreateVBAdm        allocated 7424 bytes (50 server) at 0E4A0040
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 9
    B  dbtbxbuf: Buffer TABL  (addr: 134C00C8, size: 30000128, end: 1515C4C8)
    B  dbtbxbuf: Buffer TABLP (addr: 0F3000C8, size: 10240000, end: 0FCC40C8)
    B  dbexpbuf: Buffer EIBUF (addr: 151600D0, size: 4194304, end: 155600D0)
    B  dbexpbuf: Buffer ESM   (addr: 155700D0, size: 4194304, end: 159700D0)
    B  dbexpbuf: Buffer CUA   (addr: 0FCE00D0, size: 3072000, end: 0FFCE0D0)
    B  dbexpbuf: Buffer OTR   (addr: 159800D0, size: 4194304, end: 15D800D0)
    M  rdisp/reinitialize_code_page -> 0
    M  icm/accept_remote_trace_level -> 0
    C  Using Provider SQLNCLI
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 15EF7370
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 1DEF0098
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 1DEF02C8
    S    using messages for server info
    S  size of spec char cache entry: 165020 bytes (timeout 100 sec)
    S  size of open spool request entry: 1152 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A A  -PXA--
    A  PXA INITIALIZATION
    A  PXA: Fragment Size too small: 195 MB, reducing # of fragments
    A  System page size: 4kb, admin_size: 11476kb.
    A  Attached to PXA (address 24550040, size 400000K)
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A A  ABAP ShmAdm attached (addr=56AF9000 leng=20955136 end=57EF5000)
    A  >> Shm MMADM area (addr=56E610E0 leng=134752 end=56E81F40)
    A  >> Shm MMDAT area (addr=56E82000 leng=17248256 end=57EF5000)
    A  RFC Destination> destination ides_I04_00 host ides system I04 systnr 0 (ides_I04_00)
    A  RFC Options> H=ides,S=00
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 1
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    A  Hotpackage version: 38
    M  ThrCreateShObjects        allocated 9394 bytes at 0FFD0040
    N  SsfSapSecin: putenv(SECUDIR=C:\usr\sap\I04\DVEBMGS00\sec): ok
    N N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is C:\usr\sap\I04\SYS\exe\run\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...sucessfully completed.
    N  =================================================
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    W  =================================================
    W  === ipl_Init() called
    W    ITSP Running against db release 620!
    W    ITSP Disable Kernel Web GUI functionality
    W  === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
    W  =================================================
    M  ThCheckPrevUser: clean previous user T9/U13/M0
    M M  Modeinfo for User T9/M0
    M M    tm state = 2
    M    uid = 13
    M    term type = 0x4
    M    display = 0x8
    M    cpic_no = 0
    M    cpic_idx = -1
    M    usr = >ABAP1       <
    M    terminal = >DDDC393             <
    M    client = >120<
    M    conversation_ID = >        <
    M    appc_tm_conv_idx = -1
    M    imode = 1
    M    mode state = 0x12
    M    task_type = ZTTADIA
    M    th_errno = 11
    M    rollout_reason = 1
    M    last_rollout_level = 7
    M    async_receives = 0
    M    cpic_receive = 0
    M    em handle = 0
    M    roll state = 3
    M    abap state = 3
    M    em state = 2
    M    eg state = 1
    M    spa state = 3
    M    enq state = 0
    M    next hook = T-1/U-1/M255
    M    master hook = T-1/U-1/M255
    M    slave hook = T-1/U-1/M255
    M    debug_tid = 255
    M    debug_mode = 0
    M    mode type = 0x1
    M    debug = 0
    M    tcode = >ME21N               <
    M    client conversation_ID = >        <
    M    server conversation_ID = >        <
    M    lock = 0
    M    max enq infos = 9
    M    act enq infos = 0
    M    em_hyper_hdl = 57F03BD8
    M    plugin_info = NULL
    M    act_plugin_hdl = -1
    M    act_plugin_no  = 0
    M    max_plugin_no  = 0
    M C  The IRow interface is supported by this OLEDB provider
    M  ***LOG R47=> ThResFree, delete (001023) [thxxmode.c   1283]

    I Got the same problem but at that time i have installed GUI of lower version. WHen i have upgraded the GUI it worked fine. Better you check once the SAPGUI configuration.

  • Logon failure due to an internal error-webi client tool

    Hi experts,
    I've installed WebI client tool 4.0, when I trying to logon this message appear: Logon failure due to an internal error,
    this problem has been addressed before, but could not be resolved [http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144|http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144]
    there is a way to solve this problem?
    regards,
    Jonathan.

    In a Unix environment the version is in the file “AddorRemoveProduct.sh” located in the installation folder of BI4.x
    For the updated reference table of the versions / builds and corresponding patch levels,  please see KB article # 1602088
    BI 4.0 RTM
    14.0.0.760
    Patch 04
    14.0.0.904
    Patch 05
    14.0.0.918
    Patch 06
    14.0.0.940
    Patch 07
    14.0.0.954
    Patch 08
    14.0.0.970
    Patch 09
    14.0.0.986
    Patch 10
    14.0.0.996
    Support Pack 1
    14.0.1.287
    Patch 1.1
    14.0.1.313
    Patch 1.2
    14.0.1.330
    Patch 1.3
    14.0.1.342
    Patch 1.4
    14.0.1.360
    Patch 1.5
    14.0.1.375
    Patch 1.6
    14.0.1.397
    Support Pack 2
    14.0.2.364
    Patch 2.1
    14.0.2.388
    Patch 2.2
    14.0.2.397
    Patch 2.3
    14.0.2.416
    Patch 2.4
    14.0.2.439
    Patch 2.5
    14.0.2.455
    Patch 2.6
    14.0.2.481
    Patch 2.7
    14.0.2.508
    Patch 2.8
    14.0.2.532
    Patch 2.9
    14.0.2.556
    Patch 2.10
    14.0.2.565
    Patch 2.11
    14.0.2.594
    Patch 2.12
    14.0.2.619
    Patch 2.13
    14.0.2.641
    Patch 2.14
    14.0.2.657
    Patch 2.15
    14.0.2.682
    Patch 2.16
    14.0.2.703
    Feature Pack 3
    14.0.3.613
    Patch 3.1
    14.0.3.630
    Patch 3.2
    14.0.3.657
    Patch 3.3
    14.0.3.678
    Patch 3.4
    14.0.3.691
    Please note that at today FP03 is in RampUp

  • ORA-00704: bootstrap process failure and SYSTEM datafile corrupt

    We have an Oracle 10g Express database that is getting the following error on startup.
    ORA-00704: bootstrap process failure
    It is also showing that the SYSTEM datafile is corrupt. And unfortunately the backups are gone. Is there any way to recover from this without a backup? Maybe some hidden undocumented parameter???
    We do have some full database exports from a couple weeks ago so it is not a complete loss but would really like a full recover.

    Windows XP
    We have tried allowresetlogs_corruption and allowread_only_corruption and no luck so far.
    ALTER DATABASE MOUNT
    Thu Aug 09 08:49:28 2012
    Setting recovery target incarnation to 2
    Thu Aug 09 08:49:28 2012
    Successful mount of redo thread 1, with mount id 2672004948
    Thu Aug 09 08:49:28 2012
    Database mounted in Exclusive Mode
    Completed: ALTER DATABASE MOUNT
    Thu Aug 09 08:49:50 2012
    alter database open upgrade
    Thu Aug 09 08:49:50 2012
    Beginning crash recovery of 1 threads
    Thu Aug 09 08:49:50 2012
    Started redo scan
    Thu Aug 09 08:49:50 2012
    Completed redo scan
    0 redo blocks read, 0 data blocks need recovery
    Thu Aug 09 08:49:50 2012
    Started redo application at
    Thread 1: logseq 84298, block 3, scn 10745981851
    Thu Aug 09 08:49:50 2012
    Recovery of Online Redo Log: Thread 1 Group 4 Seq 84298 Reading mem 0
    Mem# 0 errs 0: D:\DATA\ORACLE\ORADATA\XE\REDO04A.LOG
    Mem# 1 errs 0: D:\DATA\ORACLE\ORADATA\XE\REDO04B.LOG
    Thu Aug 09 08:49:50 2012
    Completed redo application
    Thu Aug 09 08:49:50 2012
    Completed crash recovery at
    Thread 1: logseq 84298, block 3, scn 10746001852
    0 data blocks read, 0 data blocks written, 0 redo blocks read
    Thu Aug 09 08:49:51 2012
    LGWR: STARTING ARCH PROCESSES
    ARC0 started with pid=18, OS id=2524
    Thu Aug 09 08:49:51 2012
    ARC0: Archival started
    ARC1 started with pid=20, OS id=2956
    Thu Aug 09 08:49:52 2012
    ARC1: Archival started
    LGWR: STARTING ARCH PROCESSES COMPLETE
    Thread 1 advanced to log sequence 84299
    Thread 1 opened at log sequence 84299
    Current log# 2 seq# 84299 mem# 0: D:\DATA\ORACLE\ORADATA\XE\REDO02A.LOG
    Current log# 2 seq# 84299 mem# 1: D:\DATA\ORACLE\ORADATA\XE\REDO02B.LOG
    Successful open of redo thread 1
    Thu Aug 09 08:49:52 2012
    ARC1: STARTING ARCH PROCESSES
    Thu Aug 09 08:49:52 2012
    ARC0: Becoming the 'no FAL' ARCH
    ARC0: Becoming the 'no SRL' ARCH
    Thu Aug 09 08:49:52 2012
    SMON: enabling cache recovery
    Thu Aug 09 08:49:52 2012
    ARC2: Archival started
    Thu Aug 09 08:49:52 2012
    ARC1: STARTING ARCH PROCESSES COMPLETE
    ARC1: Becoming the heartbeat ARCH
    ARC2 started with pid=21, OS id=3916
    Thu Aug 09 08:49:54 2012
    Successfully onlined Undo Tablespace 1.
    Thu Aug 09 08:49:54 2012
    SMON: enabling tx recovery
    Thu Aug 09 08:49:54 2012
    Database Characterset is WE8MSWIN1252
    Thu Aug 09 08:49:56 2012
    Hex dump of (file 1, block 39) in trace file c:\oraclexe\app\oracle\admin\xe\bdump\xe_smon_876.trc
    Corrupt block relative dba: 0x00400027 (file 1, block 39)
    Bad check value found during buffer read
    Data in bad block:
    type: 6 format: 2 rdba: 0x00400027
    last change scn: 0x0002.7fee0b69 seq: 0x1 flg: 0x06
    spare1: 0x0 spare2: 0x0 spare3: 0x0
    consistency value in tail: 0x0b690601
    check value in block header: 0x8f6c
    computed block checksum: 0x1000
    Reread of rdba: 0x00400027 (file 1, block 39) found same corrupted data
    Thu Aug 09 08:49:56 2012
    Stopping background process MMNL
    Thu Aug 09 08:49:56 2012
    Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_smon_876.trc:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01578: ORACLE data block corrupted (file # 1, block # 39)
    ORA-01110: data file 1: 'D:\DATA\ORACLE\ORADATA\XE\SYSTEM.DBF'
    Thu Aug 09 08:49:57 2012
    Stopping background process MMON
    Starting background process MMON
    Starting background process MMNL
    MMON started with pid=11, OS id=1012
    Thu Aug 09 08:49:58 2012
    ALTER SYSTEM enable restricted session;
    MMNL started with pid=12, OS id=3584
    Thu Aug 09 08:49:58 2012
    ALTER SYSTEM SET systemtrig_enabled=FALSE SCOPE=MEMORY;
    Thu Aug 09 08:49:58 2012
    ALTER SYSTEM SET aq_tm_processes=0 SCOPE=MEMORY;
    Thu Aug 09 08:49:58 2012
    Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_324.trc:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01578: ORACLE data block corrupted (file # 1, block # 39)
    ORA-01110: data file 1: 'D:\DATA\ORACLE\ORADATA\XE\SYSTEM.DBF'
    Thu Aug 09 08:49:58 2012
    Error 604 happened during db open, shutting down database
    USER: terminating instance due to error 604
    Thu Aug 09 08:49:59 2012
    Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_pmon_3120.trc:
    ORA-00604: error occurred at recursive SQL level
    Thu Aug 09 08:49:59 2012
    Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_psp0_3444.trc:
    ORA-00604: error occurred at recursive SQL level
    Thu Aug 09 08:49:59 2012
    Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mman_2592.trc:
    ORA-00604: error occurred at recursive SQL level
    Thu Aug 09 08:49:59 2012
    Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_dbw0_932.trc:
    ORA-00604: error occurred at recursive SQL level
    Thu Aug 09 08:49:59 2012
    Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_ckpt_1156.trc:
    ORA-00604: error occurred at recursive SQL level
    Thu Aug 09 08:50:00 2012
    Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_lgwr_1508.trc:
    ORA-00604: error occurred at recursive SQL level
    Thu Aug 09 08:50:00 2012
    Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_reco_2700.trc:
    ORA-00604: error occurred at recursive SQL level
    Thu Aug 09 08:50:00 2012
    Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_smon_876.trc:
    ORA-00604: error occurred at recursive SQL level

  • ETL Failure Due to Failure of a Task

    Hi All,
    I am getting ETL failure due to failure of a task, sporadically. Also, when i re-run the ETL, the ETL completed successfully.
    I have copied the informatica session log file.
    DIRECTOR> VAR_27027 Use default value [0] for user-defined workflow/worklet variable:[$$passInStatus].
    DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
    DIRECTOR> VAR_27028 Use override value [SEBL_80] for session parameter:[$DBConnection_OLTP].
    DIRECTOR> VAR_27028 Use override value [1] for mapping parameter:[$$DATASOURCE_NUM_ID].
    DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint1].
    DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint2].
    DIRECTOR> TM_6014 Initializing session [VisibilityActivityParty_Full] at [Wed Aug 17 00:31:31 2011]
    DIRECTOR> TM_6683 Repository Name: [Oracle_BI_DW_Base]
    DIRECTOR> TM_6684 Server Name: [Oracle_BI_DW_Base_Integration_Service]
    DIRECTOR> TM_6686 Folder: [SDE_SBL_80_Adaptor]
    DIRECTOR> TM_6685 Workflow: [VisibilityActivityParty_Full]
    DIRECTOR> TM_6101 Mapping name: VisibilityActivityParty [version 1]
    DIRECTOR> TM_6827 [D:\Informatica\PowerCenter8.1.1\server\infa_shared\Storage] will be used as storage directory for session [VisibilityActivityParty_Full].
    DIRECTOR> CMN_1802 Session recovery cache initialization is complete.
    DIRECTOR> TM_6703 Session [VisibilityActivityParty_Full] is run by 32-bit Integration Service [node01_sb8anaprd], version [8.1.1 SP5], build [0822].
    MANAGER> PETL_24058 Running Partition Group [1].
    MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
    MANAGER> PETL_24001 Parallel Pipeline Engine running.
    MANAGER> PETL_24003 Initializing session run.
    MAPPING> CMN_1569 Server Mode: [ASCII]
    MAPPING> CMN_1570 Server Code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
    MAPPING> TM_6151 Session Sort Order: [Binary]
    MAPPING> TM_6156 Using LOW precision decimal arithmetic
    MAPPING> TM_6180 Deadlock retry logic will not be implemented.
    MAPPING> TM_6307 DTM Error Log Disabled.
    MAPPING> TE_7022 TShmWriter: Initialized
    MAPPING> DBG_21075 Connecting to database [obieeprd], user [OLAP]
    MAPPING> DBG_21474 Warning: Update Strategy transform [UPDTRANS] is disabled. Set session type to [Data Driven] to enable it.
    MAPPING> TM_6007 DTM initialized successfully for session [VisibilityActivityParty_Full]
    DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
    MANAGER> PETL_24004 Starting pre-session tasks. : (Wed Aug 17 00:31:31 2011)
    MANAGER> PETL_24027 Pre-session task completed successfully. : (Wed Aug 17 00:31:31 2011)
    DIRECTOR> PETL_24006 Starting data movement.
    MAPPING> TM_6660 Total Buffer Pool size is 36000000 bytes and Block size is 65536 bytes.
    READER_1_1_1> DBG_21438 Reader: Source is [SB8PRD], user [SIEBEL]
    READER_1_1_1> BLKR_16003 Initialization completed successfully.
    WRITER_1_*_1> WRT_8146 Writer: Target is database [obieeprd], user [OLAP], bulk mode [ON]
    WRITER_1_*_1> WRT_8106 Warning! Bulk Mode session - recovery is not guaranteed.
    WRITER_1_*_1> WRT_8397 Appending output data to file [D:\Informatica\PowerCenter8.1.1\server\infa_shared\BadFiles\w_act_party.bad] (initial size [717]).
    WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL INSERT statement:
    INSERT INTO W_ACT_PARTY(INTEGRATION_ID,DATASOURCE_NUM_ID,ETL_PROC_WID,TABLE_WID,ACTIVITY_ID,PARTY_ID) VALUES ( ?, ?, ?, ?, ?, ?)
    WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL UPDATE statement:
    UPDATE W_ACT_PARTY SET ETL_PROC_WID = ?, ACTIVITY_ID = ?, PARTY_ID = ? WHERE INTEGRATION_ID = ? AND DATASOURCE_NUM_ID = ? AND TABLE_WID = ?
    WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL DELETE statement:
    DELETE FROM W_ACT_PARTY WHERE INTEGRATION_ID = ? AND DATASOURCE_NUM_ID = ? AND TABLE_WID = ?
    WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_ACT_PARTY]
    WRITER_1_*_1> WRT_8003 Writer initialization complete.
    READER_1_1_1> BLKR_16007 Reader run started.
    READER_1_1_1> RR_4029 SQ Instance [SQ_S_ACT_EMP] User specified SQL Query [SELECT
         AEMP.ROW_ID,
         AEMP.ACTIVITY_ID,
         U.PAR_ROW_ID
    FROM
         V_ACT_EMP AEMP,
         S_USER U
    WHERE
         AEMP.EMP_ID = U.ROW_ID]
    READER_1_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
    WRITER_1_*_1> WRT_8005 Writer run started.
    WRITER_1_*_1> WRT_8158
    *****START LOAD SESSION*****
    Load Start Time: Wed Aug 17 00:31:32 2011
    Target tables:
    W_ACT_PARTY
    READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Aug 17 00:31:32 2011)
    LKPDP_1> DBG_21097 Lookup Transformation [LKP_W_ACT_PARTY]: Default sql to create lookup cache: SELECT ETL_PROC_WID,INTEGRATION_ID,TABLE_WID,DATASOURCE_NUM_ID FROM W_ACT_PARTY ORDER BY INTEGRATION_ID,TABLE_WID,DATASOURCE_NUM_ID,ETL_PROC_WID
    LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [LKP_W_ACT_PARTY] from [1048576] to [1050000].
    LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
    LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [obieeprd], user [OLAP]
    LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
    LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
    LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
    LKPDP_1:READER_1_1> BLKR_16019 Read [0] rows, read [0] error rows for source table [LKP_W_ACT_PARTY{{DSQ}}] instance name [LKP_W_ACT_PARTY{{SRC}}]
    LKPDP_1:READER_1_1> BLKR_16008 Reader run completed.
    LKPDP_1:TRANSF_1_1> DBG_21682 Lookup table row count : 0
    LKPDP_1:TRANSF_1_1> DBG_21297 Lookup cache row count : 0
    LKPDP_1:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Wed Aug 17 00:31:32 2011)
    LKPDP_1:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP12190_9W32.[dat/idx] in directory D:\Informatica\PowerCenter8.1.1\server\infa_shared\Cache for Lookup [LKP_W_ACT_PARTY].
    LKPDP_1:TRANSF_1_1> DBG_21641 LKP_W_ACT_PARTY: Index cache size = [1050000], Data cache size = [2097152]
    LKPDP_1:TRANSF_1_1> DBG_21216 Finished transformations for Source Qualifier [LKP_W_ACT_PARTY{{DSQ}}]. Total errors [0]
    TRANSF_1_1_1> CMN_1079 WARNING: Lookup table contains no data.
    TRANSF_1_1_1> DBG_21524 Transform : LKP_W_ACT_PARTY
    TRANSF_1_1_1> DBG_21313 Lookup table : W_ACT_PARTY
    TRANSF_1_1_1> DBG_21562 WARNING : Output rows from LKP_W_ACT_PARTY will be the default port value
    LKPDP_2> DBG_21097 Lookup Transformation [LKP_ETL_PROC_WID]: Default sql to create lookup cache: SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
    LKPDP_2> TE_7212 Increasing [Index Cache] size for transformation [LKP_ETL_PROC_WID] from [1048576] to [1050000].
    LKPDP_2> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
    LKPDP_2:READER_1_1> DBG_21438 Reader: Source is [obieeprd], user [OLAP]
    LKPDP_2:READER_1_1> BLKR_16003 Initialization completed successfully.
    LKPDP_2:READER_1_1> BLKR_16007 Reader run started.
    LKPDP_2:READER_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
    LKPDP_2:READER_1_1> BLKR_16019 Read [0] rows, read [0] error rows for source table [LKP_ETL_PROC_WID{{DSQ}}] instance name [LKP_ETL_PROC_WID{{SRC}}]
    LKPDP_2:READER_1_1> BLKR_16008 Reader run completed.
    LKPDP_2:TRANSF_1_1> DBG_21682 Lookup table row count : 0
    LKPDP_2:TRANSF_1_1> DBG_21297 Lookup cache row count : 0
    LKPDP_2:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Wed Aug 17 00:31:32 2011)
    LKPDP_2:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP12190_10W32.[dat/idx] in directory D:\Informatica\PowerCenter8.1.1\server\infa_shared\Cache for Lookup [LKP_ETL_PROC_WID].
    LKPDP_2:TRANSF_1_1> DBG_21641 LKP_ETL_PROC_WID: Index cache size = [1050000], Data cache size = [2097152]
    LKPDP_2:TRANSF_1_1> DBG_21216 Finished transformations for Source Qualifier [LKP_ETL_PROC_WID{{DSQ}}]. Total errors [0]
    TRANSF_1_1_1> CMN_1079 WARNING: Lookup table contains no data.
    TRANSF_1_1_1> DBG_21524 Transform : LKP_ETL_PROC_WID1
    TRANSF_1_1_1> DBG_21313 Lookup table : W_PARAM_G
    TRANSF_1_1_1> DBG_21562 WARNING : Output rows from LKP_ETL_PROC_WID1 will be the default port value
    WRITER_1_*_1> WRT_8167 Start loading table [W_ACT_PARTY] at: Wed Aug 17 00:31:32 2011
    WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    WRITER_1_*_1> WRT_8229 Database errors occurred:
    ORA-01400: cannot insert NULL into (ETL_PROC_WID)
    Database driver error...
    Function Name : Execute Multiple
    SQL Stmt : INSERT INTO W_ACT_PARTY(INTEGRATION_ID,DATASOURCE_NUM_ID,ETL_PROC_WID,TABLE_WID,ACTIVITY_ID,PARTY_ID) VALUES ( ?, ?, ?, ?, ?, ?)
    WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    WRITER_1_*_1> WRT_8425 ERROR: Writer execution failed.
    WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    WRITER_1_*_1> WRT_8114
    Row # [1] in bad file
    WRITER_1_*_1> CMN_1053 : Rowdata: ( RowType=0(insert) Src Rowid=1 Targ Rowid=1
    INTEGRATION_ID (INTEGRATION_ID:Char.30:): "1-B8THY"
    DATASOURCE_NUM_ID (DATASOURCE_NUM_ID:Double:): "1.000000000000000"
    ETL_PROC_WID (ETL_PROC_WID:Double:): "(NULL)"
    TABLE_WID (TABLE_WID:Double:): "68.00000000000000"
    ACTIVITY_ID (ACTIVITY_ID:Char.15:): "1-N8FBX"
    PARTY_ID (PARTY_ID:Char.15:): "0-1"
    WRITER_1_*_1> WRT_8164 Error loading into target [W_ACT_PARTY] : Bad rows exceeded Session Threshold [1]
    WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
    WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    WRITER_1_*_1> CMN_1022 Database driver error...
    CMN_1022 [
    ORA-24795: Illegal ROLLBACK attempt made
    Database driver error...
    Function Name : Commit
    Database driver error...
    Function Name : Rollback]
    WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    WRITER_1_*_1> WRT_8183 Rollback failed for the target [W_ACT_PARTY]
    WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    WRITER_1_*_1> WRT_8080 Writer run terminated. [Error loading data and error threshold reached]
    WRITER_1_*_1> WRT_8168 End loading table [W_ACT_PARTY] at: Wed Aug 17 00:31:32 2011
    WRITER_1_*_1> WRT_8035 Load complete time: Wed Aug 17 00:31:32 2011
    LOAD SUMMARY
    ============
    WRT_8036 Target: W_ACT_PARTY (Instance Name: [W_ACT_PARTY])
    WRT_8038 Inserted rows - Requested: 488 Applied: 0 Rejected: 1 Affected: 0
    WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [W_ACT_PARTY] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [UPDTRANS] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [UPDTRANS] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [FILTRANS] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [FILTRANS] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [LKP_ETL_PROC_WID] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [LKP_ETL_PROC_WID] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [EXPTRANS] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [EXPTRANS] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
    TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
    MANAGER> PETL_24031
    ***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
    Thread [READER_1_1_1] created for [the read stage] of partition point [SQ_S_ACT_EMP] has completed: Total Run Time = [0.656254] secs, Total Idle Time = [0.390627] secs, Busy Percentage = [40.476246].
    Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [SQ_S_ACT_EMP] has completed: Total Run Time = [0.562504] secs, Total Idle Time = [0.406252] secs, Busy Percentage = [27.777928].
    Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_ACT_PARTY] has completed. The total run time was insufficient for any meaningful statistics.
    MANAGER> PETL_24005 Starting post-session tasks. : (Wed Aug 17 00:31:33 2011)
    MANAGER> PETL_24029 Post-session task completed successfully. : (Wed Aug 17 00:31:33 2011)
    MAPPING> TE_7216 Deleting cache files [PMLKUP12190_9W32] for transformation [LKP_W_ACT_PARTY].
    MAPPING> TE_7216 Deleting cache files [PMLKUP12190_10W32] for transformation [LKP_ETL_PROC_WID].
    MAPPING> TM_6018 Session [VisibilityActivityParty_Full] run completed with [0] row transformation errors.
    MANAGER> PETL_24002 Parallel Pipeline Engine finished.
    DIRECTOR> PETL_24013 Session run completed with failure.
    DIRECTOR> TM_6022
    SESSION LOAD SUMMARY
    ================================================
    DIRECTOR> TM_6252 Source Load Summary.
    DIRECTOR> CMN_1740 Table: [SQ_S_ACT_EMP] (Instance Name: [SQ_S_ACT_EMP])
         Output Rows [50592], Affected Rows [50592], Applied Rows [50592], Rejected Rows [0]
    DIRECTOR> TM_6253 Target Load Summary.
    DIRECTOR> CMN_1740 Table: [W_ACT_PARTY] (Instance Name: [W_ACT_PARTY])
         Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [1]
    DIRECTOR> TM_6023
    ===================================================
    DIRECTOR> TM_6020 Session [VisibilityActivityParty_Full] completed at [Wed Aug 17 00:31:33 2011]
    Can some one help me to debug the issue please ?
    Thanks

    Hi Nat,
    Thanks a lot for your response.
    I am running this ETL task from DAC. This task is a part of Daily Full load ETL. As i mentioned earlier, this task fails sporadically and failing till now. After restarting the ETL, it gets completed.
    Please let me know if you have any question.
    Thanks,
    Neeraj

  • 32bit Primary to 64bit Standby-"ORA-00704: bootstrap process failure"

    Hello All,
    As per the Doc ID 414043.1 it is possible to use mixed word size primary-standby configurations since 10g and better in 11g.
    So i created my test env:-
    OS: Linux 5.5 64bit
    DB Name: TEST
    Primary  - TEST32 on 32bit Oracle Home
    Standby-  TEST64 on 64bit Oracle Home
    I could apply TEST32's archive logs(manually) on TEST64 without any problem, but when i tried to migrate to 64bit it kept failed with "ORA-00704: bootstrap process failure ORA-39700: database must be opened with UPGRADE option"
    What i did on TEST64 is:
    1) Activate physical standby
    2) Startup Upgrade
    3)@?/rdbms/admin/utlirp.sql
    4)@?/rdbms/admin/utlrp.sql
    5)Shutdown
    6)Startup
    When i issue startup(step 6); it fails with
    <pre>
    SQL> startup;
    ORACLE instance started.
    Total System Global Area 1670221824 bytes
    Fixed Size 2227072 bytes
    Variable Size 419431552 bytes
    Database Buffers 1241513984 bytes
    Redo Buffers 7049216 bytes
    Database mounted.
    ORA-01092: ORACLE instance terminated. Disconnection forced
    ORA-00704: bootstrap process failure
    ORA-39700: database must be opened with UPGRADE option
    Process ID: 22712
    Session ID: 126 Serial number: 5
    SQL> exit
    ＜/pre＞
    Did i go wrong somewhere ?
    TIA,
    JJ

    What i did on TEST64 is:
    1) Activate physical standby
    2) Startup Upgrade
    3)@?/rdbms/admin/utlirp.sql
    4)@?/rdbms/admin/utlrp.sql
    5)Shutdown
    6)Startup
    SQL> startup;
    ORA-01092: ORACLE instance terminated. Disconnection forced
    ORA-00704: bootstrap process failure
    ORA-39700: database must be opened with UPGRADE option
    Process ID: 22712
    Session ID: 126 Serial number: 5SQL> Startup upgrade.

  • Bootstrap process failure

    Hi Everybody,
    Database Version:Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    Os:Windows Xp.
    When I am trying to startup the Database it giving me the following error..
    SQL> startup
    ORACLE instance started.
    Total System Global Area  113246208 bytes
    Fixed Size                  1247588 bytes
    Variable Size              58721948 bytes
    Database Buffers           50331648 bytes
    Redo Buffers                2945024 bytes
    Database mounted.
    ORA-01092: ORACLE instance terminated. Disconnection forcedWhen i looked into the alert log file it showing me the follwoing error's
    Fri Oct 17 15:47:22 2008
    Errors in file d:\oracle\product\10.2.0\admin\primary\udump\primary_ora_3812.trc:
    ORA-00704: bootstrap process failure
    ORA-00604: error occurred at recursive SQL level 2
    ORA-04031: unable to allocate 16 bytes of shared memory ("shared pool","select o.owner#,o.name,o.nam...","sql area","kggsmInitCompact:offsetVec")
    Fri Oct 17 15:47:22 2008
    Error 704 happened during db open, shutting down database
    USER: terminating instance due to error 704
    ARC2 started with pid=16, OS id=3024
    Fri Oct 17 15:47:22 2008
    Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_lns1_872.trc:
    ORA-00704: bootstrap process failure
    Fri Oct 17 15:47:22 2008
    Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_reco_3120.trc:
    ORA-00704: bootstrap process failure
    Fri Oct 17 15:47:22 2008
    Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_pmon_2652.trc:
    ORA-00704: bootstrap process failure
    Fri Oct 17 15:47:23 2008
    Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_ckpt_928.trc:
    ORA-00704: bootstrap process failure
    Fri Oct 17 15:47:23 2008
    Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_lgwr_3332.trc:
    ORA-00704: bootstrap process failure
    Fri Oct 17 15:47:23 2008
    Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_dbw0_1696.trc:
    ORA-00704: bootstrap process failure
    Fri Oct 17 15:47:23 2008
    Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_mman_1724.trc:
    ORA-00704: bootstrap process failure
    Fri Oct 17 15:47:24 2008
    Errors in file d:\oracle\product\10.2.0\admin\primary\bdump\primary_psp0_2464.trc:
    ORA-00704: bootstrap process failure
    Instance terminated by USER, pid = 3812
    ORA-1092 signalled during: ALTER DATABASE OPEN...even i looked into the trace files mentioned in the alert log but no definite information is provided out there.....
    How to overcome this Bootstrap process failure error.......
    Any Help Appreciated..
    Regards,
    Prosenjit Mukherjee.

    Recommended action for ORA-00704 is to contact Oracle support.
    Just out of curiosity, whats the machine configuration?

  • ORACLE server session terminated by fatal error

    Hi,
    When i try to startup my database(10g), i am getting this error after database monted.
    ORA-00603: ORACLE server session terminated by fatal error.
    (Startup nomount is ok)
    conn /as sysdba
    Total System Global Area 1048576000 bytes
    Fixed Size 1223392 bytes
    Variable Size 343934240 bytes
    Database Buffers 700448768 bytes
    Redo Buffers 2969600 bytes
    Database mounted.
    ORA-00603: ORACLE server session terminated by fatal error
    Alert.log:
    Errors in file /u01/app/oracle/product/10.2.0/db_1/admin/db/udump/db_ora_9917.trc:
    ORA-00603: ORACLE server session terminated by fatal error
    ORA-00600: internal error code, arguments: [4194], [24], [14], [], [], [], [], []
    ORA-00600: internal error code, arguments: [4194], [24], [14], [], [], [], [], []
    The trace file is 1,6GB(!)
    Trace file:
    ----- Redo read statistics for thread 1 -----
    Read rate (ASYNC): 26Kb in 0.78s => 0.03 Mb/sec
    Total physical reads: 4096Kb
    Longest record: 0Kb, moves: 0/62 (0%)
    Change moves: 35/122 (28%), moved: 0Mb
    Longest LWN: 14Kb, moves: 0/13 (0%), moved: 0Mb
    Last redo scn: 0x0000.31539752 (827561810)
    NO VALID LOG MEMBER FOR SEQ# 20884 OF THREAD 1!
    NO VALID LOG MEMBER FOR SEQ# 20883 OF THREAD 1!
    *** 2011-01-06 06:18:51.782
    ksedmp: internal or fatal error
    ORA-00600: internal error code, arguments: [4194], [56], [49], [], [], [], [], []
    Current SQL statement for this session:
    update service$ set name = :1, name_hash = :2, network_name = :3, creation_date = :4, creation_date_hash = :5, deletion_date = null, goal = :6, flags = :
    ----- Call Stack Trace -----
    Thanks

    Hello,
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u01/app/oracle/product/10.2.0/oradata/db/system01.dbf'The system01.dbf which belongs to the Tablespace SYSTEM is still inconsistent.
    So, I think you'll need to start from a Backup and apply all the Archived Redo logs before the ORA-600 occured.
    More over, try to open a Service Request to My Oracle Support and, send them all the Traces Files and Alert Log so that they can follow all the actions which has occured on this Database. You may need their help.
    Best regards,
    Jean-Valentin

  • SOAP processing failure, error id = 112

    Hi,
    i call a web service and get the following error message:
    - <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
    - <soap-env:Body>
    - <soap-env:Fault>
      <faultcode>soap-env:Server</faultcode>
      <faultstring xml:lang="en">SOAP processing failure, error id = 112</faultstring>
      </soap-env:Fault>
      </soap-env:Body>
      </soap-env:Envelope>
    I have no answer find in the forum.
    Any ideas?
    regards

    does the connection test work in SM59??
    I think you got to involve a basis guy. unless I can't see your proxy settings, your dev_traces and so on I can#t diagnose your problem correctly.
    the unallowed XML-Tag error could arise in the following situation:
    you call a service, but your proxy doesn't forward the request due to authentication or other problems and returns you something like
    <html><body><h1>A proxy error occured. Call your admin.</h1></body></html>
    this is because the proxy assumes you use a browser and therefore returns a 'nicely formatted answer'(i.e. one in HTML, which you could easily understand if you used a browser).
    If its not the proxy your webserver could return for instance a 401-Forbidden, which also often comes nicely formatted to be rendered with a browser.
    Your proxy runtime on the other side expects no other answer than one starting with
    <xml ... > ....
    since yours starts with
    <html>...
    it says 'unnallowed XML tag'.
    This way there can be numerous errors and I can only advice you to use all debugging tools available and inspect the communication carefully.
    anton
    Message was edited by:
            Anton Wenzelhuemer

Maybe you are looking for

  • Menu not showing up

    http://highviewhills.com/index.html I have a Menu Machine menu that isn't showing up for the client, who is an Windows IE user. It shows up fine in my Mac Safari and Firefox. It's not overlapping the swf animation at all. I've rebuilt and flattened t

  • PO Print out need to be  print the Excise detais and VAT

    Hi experts, We need to print PO Print out Excise  duty and VAT, From where the condition type  JMOP  like pick (fetech ) data  to print in PO printout Please help Regards, Channa

  • How to set different icons for different windows which is seen in the top left corner?

    Hi How to set different icons for different windows which is seen in the top left corner? I know when building exe there is a option to edit icons or add icons and that icon is default for all the windows in the project. But i want different icons fo

  • Nokia photo transfer for Mac Yosemite OS

    Hi, It seems that Nokia Photo Transfer does not work in the Mac Yosemite OS – at least it does not find my Lumia 1020. Is there any chance of getting an update – or is there any other way to transfer photos speedily by a USB cable from Lumia to Mac?

  • Concat Strings to create a Resource Bundle KEY

    Hello, I`m having a little problem. I need, at the same point o a JSF page to show 2 different messages depending on a String variable value inside a Bean. Then I was thinking if a could have the 2 different keys for the 2 different messages written