PSB Save, 2gb file error

Hi all,
I'm on PS CC, trying to save a PSB file (360"x360"). I know that PSD won't work with something this size, which is why i'm trying to save as PSB. I've purged, converted to/from 8/16 bit, flattened and everything, but every time I save, I get the "larger than 2gb error". Am I doing something wrong? Is there an issue/formatting thing i'm not aware of?
Trying to get this thing to print by EOD, so any help would be greatly appreciated.
Michael

It is possible that the hard Drive is formatted using the FAT format which has a limit of about 2 GB. So this will all depend on what OS you have and it's format.
But all I can do for now is guess.

Similar Messages

  • Keep getting Cannot save library file error -50 message on my PC

    I keep getting "cannot save library file error -50 when I open up iTunes on my PC
    Won't download music purchased on iPhone4 to iTunes in my PC

    Same issue here. Running Windows Vista Home Premium Edition and newest version of iTunes. Normally happens when I am ripping a CD into iTunes and by chance multi task or the screen saver kicks in.
    What ***** is if you walk away while ripping a CD(because it takes 3 times as long in iTunes vs any other ripper), and it will halt your ripping until you click "ok". I have not tried the "dont tell me again" check box just in case it is a problem I need to know about. This happened about 2 or 3 days after upgrading to Vista and I got an empty library the next time I opened the library. Somehow it got corrupted. Luckily I back up the xml file and just restored that one file from last back up.
    (off subject but also getting the maxed our processor still in the newest version for Windows Vista. Wish they would fix that!)

  • "couldn't save media file" error when saving

    I'm using Keynote 2.0.2 and for some reason, it won't let me save my presentation when it includes a 3.3Gb quicktime .mov file.
    The presentation runs perfectly on my laptop, but when I save, the spinning ball appears and then I get this:
    "The following errors occurred while trying to save this document:
    Couldn't save media file - week3edit.mov"
    This is driving me nuts, especially as I can insert exactly the same .mov file into a PowerPoint presentation and have it save no problem!
    What could be causing this? Thanks in advance for any suggestions!
    Barry

    Use only numbers or letters in the file name. I've
    seen failures in files that use even simple
    punctuation. Cynthia's sound.mov should be
    cynthias_sound.mov.
    The other issue could be "protected" files. You can't
    share iTunes Music Store files. If the file extension
    is .m4p the file is protected.
    These are .mp4 files that I converted. No copyright issues. And there is a space in the file name, but there are in all the other file names as well.
    Weird, huh?

  • Webgui - save local file error

    Hi,
    I have a problem with the "save local file" (Excel) in the fictional MSS mentioned in webgui.
    In particular I set tcode fpb_launchpad_cust Application Cate as URL that invokes a service (SICF) custom, which within a custom tcode. to customize the display and leave intact the standard webgui.
    The log of the local JVM tells me:
    loading: class Query.class not found.
    java.lang.ClassNotFoundException: Query.class
    sun.plugin2.applet.Applet2ClassLoader.findClass at (Unknown Source)
    at java.lang.ClassLoader.loadClass (Unknown Source)
    at java.lang.ClassLoader.loadClass (Unknown Source)
    sun.plugin2.applet.Plugin2ClassLoader.loadCode at (Unknown Source)
    sun.plugin2.applet.Plugin2Manager.createApplet at (Unknown Source)
    sun.plugin2.applet.Plugin2Manager AppletExecutionRunnable.run at $
    (Unknown Source)
    at java.lang.Thread.run (Unknown Source)
    Caused by: java.io.IOException: open HTTP connection failed:
    http://xxxxxxxxxxxxx:8001/sap/public/bc/its/mimes/webgui/sl/applets/Query/class.class
    sun.plugin2.applet.Applet2ClassLoader.getBytes at (Unknown Source)
    sun.plugin2.applet.Applet2ClassLoader.access at $ 000 (Unknown Source)
    sun.plugin2.applet.Applet2ClassLoader at $ 1.run (Unknown Source)
    at java.security.AccessController.doPrivileged (Native Method)
    ... 7 more
    Exception: java.lang.ClassNotFoundException: Query.class
    The path
    "http://xxxxxxxxxxxxx:8001/sap/public/bc/its/mimes/webgui/sl/applets/Query/class.class"
    in SICF doesn't exist.
    Can you help me?
    I installed the correct notes for the "truncate columns" 1317116
    when printing the same functionality described above in pdf. Before
    everything worked.
    I installed notes to correct columns truncate 1317116
    to print the same view in pdf. Before everything worked.
    Now I tried to deimplement the notes but the problem remainsl.
    SAPKB70017
    Kernel release 700 - pl 200
    Internet Explorer 7
    JVM 1.6.0.20 (WITH JVM 1.6.0.5 is OK)
    Can you help me?
    Regards,
    Diego Garofalo.

    Hi Diego,
    First you should implement SAP note 742197 to have a JAR file with a valid certificate.
    Once you have implement this note then you need to republish the WEBGUI and the IAC internet services via SE80. This [Wiki|http://wiki.sdn.sap.com/wiki/x/kmE] should help you in this process.
    Finally, invalidate mimes in SITSPMON and clear IE cache.
    What is the result of a new test?
    BTW, the Query.class is inside the WS.JAR file.
    I hope this helps.
    Best regards,
    Cristiano

  • ITunes "cannot save library file" error in Vista

    I just began ripping my latest pile of cd's into iTunes on my new Vista Media Center PC. Occasionally I get the popup "The iTunes library file cannot be saved. You do not have enough access privileges for thei operation" I checked and double checked the security on all of the iTunes files and folders, and not only do I (the system administrator), but also SYSTEM and Everyone have full access to the folder and files. My library is in C:\Users\Jerry\Music\iTunes\ , which is the default installation directory selected by iTunes. I have almost 11,000 songs, and I have already completely rebuilt the library in this version of iTunes as a means to try to resolve this problem. I am on iTunes 7.2.0.16 , everything on the PC is up to date, and I see nothing that makes this error seem correct. Has anyone else seen this, and do you have a fix? What are the implications of NOT saving the file? Thanks, Jerry

    Same issue here. Running Windows Vista Home Premium Edition and newest version of iTunes. Normally happens when I am ripping a CD into iTunes and by chance multi task or the screen saver kicks in.
    What ***** is if you walk away while ripping a CD(because it takes 3 times as long in iTunes vs any other ripper), and it will halt your ripping until you click "ok". I have not tried the "dont tell me again" check box just in case it is a problem I need to know about. This happened about 2 or 3 days after upgrading to Vista and I got an empty library the next time I opened the library. Somehow it got corrupted. Luckily I back up the xml file and just restored that one file from last back up.
    (off subject but also getting the maxed our processor still in the newest version for Windows Vista. Wish they would fix that!)

  • Can't save a file; error message says file couldn't be opened

    Using Pages '09 ver. 4.3 and OSX 10.8.4
    When I try to save a new document in pages, I get an error message that says "the file 'xxxx.pages-tef" couldn't be opened. 
    How can I fix this so that I can start saving files again?

    Pages 5.2 Mac OSX 10.9.2
    Start Pages app
    Create a blank document
    File > Save or <Command>+S
    Select Mac Device and find your user folder or favorite, Desktop (not iCloud)
    Error: the file "Untitled.pages" couldn't be opened!?!
    Repeat giving the document a different name and it works
    Since when do we write error messages with "n't"?
    Usually a well written error message offers a suggestion as to what you might do about it?
    Since it says opened and I clicked on Save, there is a bug in there somewhere.
    All I was trying to do today was copy and paste some text from a website into numbers spreadsheet
    Both Edit > Paste options but the text in one cell so I tried to save it as a text file first to try and import the data
    Text Edit does not have a text only export format so before loading Terminal and starting vi or emacs, I tried pages. I'll go try XCode's editor or my Windows 7 vm with notepad and openoffice
    I miss the old Pages with the Appleworks importer, this one needs more Quality Assurance Testing IMHO
    WWSJD "What Would Steve Jobs do?"

  • Scan Save to File error

    When scanning to file, I get this error message: an error occurred saving the images to the chosen location.  Please make sure you have write permission in the chosen file location.  Error 8, [ (2 106,0) ].  Have installed the latest drivers; set sharing to everyone on destination folder.  Help please.

    Hello neejue,
    Welcome to the HP Forums.
    I see that you are having an issue with saving you scans.
    So I can better assist you, please respond with which Operating System you are running as well as the exact printer model number.
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How Do I Find My Model Number?
    Write me back when you have time and I will be happy to help.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Save XML File Error

    I was trying to replace a Node in an XML file (see attached VI - LV 2010), but for some reason the Load or Save XML VI's are changing the format of the XML Header (only by a couple of \n characters, but enough for the application reading the XML file to say it is corrupt).  In the Load XML VI I have left all the Inputs at their default values (ie. Preserve Whitespace) so why is the file being modified?
    What the original file header contents look like..... 
    <?xml version="1.0" encoding="iso8859-1" standalone="no" ?>
    <METRONFile Type="Record" Version="2.0.1">
    <Application Name="Ansur" Version="2.9.4">
    What the Header looks like after using the LabVIEW Load/Save XML VI's.
    <?xml version="1.0" encoding="iso8859-1" standalone="no" ?><METRONFile Type="Record" Version="2.0.1">
    <Application Name="Ansur" Version="2.9.4">
     Chris
    Attachments:
    XML Replace Node Value.vi ‏16 KB

    Believe me I have tried all possible variations of the inputs to the NI_XML.lvlib:Load XML File.vi, none of them make a difference.  Also the Block Diagram of this VI doesn't help much since it is just a couple of Property and Invoke Nodes so nothing to debug really.
    I have attached the XML file that we are working with if you want to experiment - thanks
    Note: I had to change the extension of the attached file from *.mtr to *.txt since the website says it is not a valid extension for an attachment.
    Chris
    Attachments:
    0350E141014545182220110131_new.txt ‏11 KB

  • Save XML file error permission

    Hi everyone,
    I read a XML file, edit it and save again:
                    var filePath:String = File.applicationDirectory.resolvePath("alerts.xml").nativePath;
                    var file:File = new File(filePath);
                   var fs:FileStream = new FileStream();
                    fs.open(file, FileMode.READ);
                    fs.addEventListener(IOErrorEvent.IO_ERROR, editsettings_IOError);
                    var xml:XML = XML(fs.readUTFBytes(fs.bytesAvailable));
                    fs.close();
                    fs.open(file, FileMode.WRITE);
                    xml[key] = value;
                    xml.toXMLString();
                    fs.writeUTFBytes(xml);
                    fs.close();
    When I´m in debug mode, everything is fine, but when I generate a Executable installer (native installer), it doesn´t work.
    I don´t have permission.
    Any solution?

    Hello,
    That's explicitely marked in documentation to not use "applicationDirectory" for write (updates/modification/deletion/etc), e.g.:
    The File class includes static properties that let you reference commonly used directory locations. These static properties include:
    File.applicationStorageDirectory—a storage directory unique to each installed AIR application
    File.applicationDirectory—the read-only directory where the application is installed (along with any installed assets)
    and later on the same page:
    Modifying content in the application directory is a bad practice, for security reasons, and is blocked by the operating system on some platforms. If you want to store application-specific data, consider using the application storage directory (File.applicationStorageDirectory).
    http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/filesystem/File.h tml#applicationDirectory
    So as pointed in docs you could use applicationStorageDirectory as location where you application-specific content is to be stored/created/updated/written/etc.
    (otherwise everything works fine when running local ADT/debug session - but it could fail at any time when deployed)
    hth,
    kind regards,
    Peter

  • Why do I get a program error when trying to save a file

    I've loaded and reinstalled photoshop elements 3 times. I can not save any files. all i get is cannot save file do to  program error message'
    this is a brand new product with a program error and they want me to pay them to fix there problem. it ain't right.

    which version of Photoshop Elements are you using? Also, do tell us about the flavour of Operating System you are using and the format in which  you are trying to save your file.
    You can also try saving your file to a different location( e.g. desktop) to check if your computer has any permission issues

  • File Error: Unknown File, Cannot Save

    I hope this is only a matter of healthy file management, but I'm quite confused and hope someone can clear this up into something of a simple science. On the otherhand, could this be a LIMITATION of FCP?
    -Have been editing a sequence from a larger film on a second computer. That sequence has been worked on over several days and saved (of course). However, upon saving last night, was an error message: "File error: Unknown File" and the project could not be saved.
    -This is quite possibly due to the fact that both the media and project files have been copied over the network to the first computer where the master project is being assembled.
    -HOWEVER, no media files claimed to be offline, everything was editable AND the FILE WOULD NOT SAVE through multiple attempts
    -ALSO, the other open project WOULD NOT SAVE either (its files where never moved or otherwise tampered with. It was a small and entirely local operation).
    -SAVING was finally accomplished ONLY by saving the project file to the LOCAL HD rather than the EXTERNAL DRIVE where the MEDIA and PROJECT FILES originated and had been previously saved to.
    -All other attempts to save to the EXTERNAL were met with the message "FILE ERROR: UNKNOWN FILE" This compromised saving process resulted in the loss of all work, edits, etc. on the LESSER and EXCLUSIVELY local project.
    -AFTER saving to the LOCAL HD, the project COULD BE once again saved to the EXTERNAL HD. This flow seemed very strange to me.
    -Has anyone else encountered this problem, and what can I correct in my processes to avoid this.
    --*Also, the First computer encountered the same problems at the same time, after both EDITING & SAVING had taken place since the last FILE COPYING. Again, work was lost.
    Thanks for any help you can offer.
    G5 Dual 2 GHz PowerPC   Mac OS X (10.4.5)   1.5 GB ram

    Do people search this forum at all?!?
    Check your project for CMYK files.
    Search this forum for General Error.
    This was discussed about 90 minutes ago.

  • File Error: Unknown File - when doing save as

    yet another variation on the file problems i am having.
    opened an aotosave file and tried to 'Save project as",
    wont do it, reports "File error: unknown file"
    the same error i get often when trying to "save as" the original,
    and the same error i get if i make a copy of the FCP file in the finer, open it and try to save it, it wont do it.....
    so with the main sequence in my project getting lost ("not found"),
    i now find that its almost impossible to make a backup that works....
    anyone know about this SERIOUS FAULT.
    i can think of no reason why it cant handle the most basic act of keeping assets attached to the program.
    new computer, new drives, new everything..
    i am now working really scared, when it loses the main sequence again (1 hour), the latest backup that might work could be anything from 1 - 5 days old, who knows, and there goes days of work...
    ======================================
    FCP6
    HDV captures.
    Main sequence is prores render.
    Files and media on one 750G drive in the Mac Pro box.
    deleted all render files yesterday, now only about 15 there.
    changed MP3 tracks to aif.
    have done FCP resue often
    have done permissions
    have upgraded to 10.4.10

    i now find that its almost impossible to make a backup that works....
    anyone know about this SERIOUS FAULT.
    i can think of no reason why it cant handle the most basic act of keeping assets attached to the program.
    new computer, new drives, new everything..
    Except that this issue is almost always totally unrelated to FCP at all.
    Paulo has dome great anecdotal advice but this is usually a fiel permissions problem. No idea how it gets changed but you can run Disk Utility and repair permissions. Do it twice. then Get Info on your drive and see what the privileges are. Do the same for your FCP projects folders. Get info on your FCP project file itself.
    You need to get this figured out before you invest any more time in editing.
    bogiesan

  • Error Message as " SU - SUBRC 12" when going to save SAP files in Excel

    Dear Sir/Madam,
    One of our User in SAP Getting the following error message when he is going to save any files in SAP as
    SYSTEM->LIST->LOCAL FILES  and then Spredshhet in Excell as :
    *"You are not Authorized to save lists in local files ( SY- SUBRC 12 )"
    Earlier he has no problem to save such files. He is facing the problem all tcodes like MC.9MB51 etc.
    Please give solutions.
    Thanks in Advance...
    Pranab

    Check his authorization for the Objects:
    S_ALV_LAYO                 ALV Standard Layout                         ACTVT = 23
    S_BDS_DS                       BC-SRV-KPR-BDS: Authorizations for Document Set
    S_GUI                               Authorization for GUI activities            ACTVT = 61
    These objects should have the values mentioned in the Right side.
    Regards,
    Dipanjan

  • Unable to save mpp 2013 file, error "the file cannot be opened"

    Using a local copy of Microsoft Project Pro 2013.
    Opening and editing mpp files created only with 2013, never using earlier versions or format.
    However, sometimes after opening a 2013 mpp file, working on it, then trying to Save, or Save-AS, pops up a message
    The file "project.mpp" cannot be opened.
    At this point is it IMPOSSIBLE to save the file in any way!
    Can't save or Save-As to any location on my computer or network.
    This is very frustrating to loose all the work done on a file. This happens in various files, never on specific files or anything else I can put my finger on.
    -----------The full error is as following--------------
    The file "project.mpp" cannot be opened.
    * Check that the file name and path are correct.
    * Check that the file format is recognized by Project.
    Project files saved in versions earlier than Microsoft Project 2000 can't be opened.
    If your file is from an earlier version, open in that version, click Save As (File menu), and save in MPX format. Open the MPX file in the current version of Project. When you use this method, project data is imported, but formatting is lost.
    Your kind assistance please,
    Thank you

    Hi,
    If you don't find any clue, you can send your file to me (guillaume.rouyreATgcosiDOTcom, replace cap) so I can give a try.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • Set Adobe Acrobat XI Pro. When I want to save the file in WORD, EXCEL or esporta file into ... immediately throws an error "save as failed to process this document no file was created". What's the problem?

    Set Adobe Acrobat XI Pro. When I want to save the file in WORD, EXCEL or esporta file into ... immediately throws an error "save as failed to process this document no file was created".
    What's the problem?
    Any help in finding a solution is greatly appreciated.
    Thank you,

    Installed AcrobatXI PRO 11.0.09  on seven computers and laptops. Two of them gives an error when you try to save a document in WORD, EXCEL, Power Point, or when exporting to... error: Save failed to process this document. No File was created.
    But all good saves in the format of TXT and jpg.
    I have uninstalled and restored and re-installed and updated and registry cleaned and removed using the special utility Cleaner Tool for Acrobat, but nothing helps.
    On one notebook with Windows 8.1 and Microsoft office 2013, on another laptop with Windows 7 and Microsoft office 2010, the same problem, although there are computers with Windows 7 and Microsoft office 2010 and everything works.
    Tell me where to find the problem and how to solve it.
    Thank you.

Maybe you are looking for