PSC 1210 page feed before and after printing
My PSC 1210 has been working fine for years but it has just recently started feeding a blank page before and after printing. That wouldn't be a problem except that the blank pages are not fully ejected, this means that I have to grab the first blank page, as it comes through the printer, and pull it out, otherwise it gets drawn back in causing a paper jam when the actual print job starts. Once this blank page has been removed the print job continues perfectly.
This occurs when printing documents, copying using the scanner, and printing a test page.
I have removed and reinstalled the printer driver/software and performed a partial reset on the printer, neither fixed the problem.
I see you mention that the issue also happens when you are copying, that means that this issue is not related to your printer software. So that's good to know!
Now, since this is not a software issue, this must then be related to your hardware. Is this printer plugged into a wall outlet directly or is it plugged into a surge protector? To be sure that the printer gets all the power it needs make sure that it is plugged directly into a wall outlet.
First things first, I would recommend unplugging the printer for about 30 seconds from both the back of the unit and from the wall outlet, and then plugging it back in. Try making a copy or print and see if the issue persists.
You can also try cleaning the paper feed rollers in the printer, here is a document that can show you where all of those are located and how to clean them.
http://goo.gl/glh8v
Let me know if any of this helps resolve the issue!
Similar Messages
-
Status page before and after print jobs managed by Jetdirect.
Hey Guys I am receiving an extra page before and after every print job.
Printers are managed from Jetdirect Printer Installer for Unix Version E.10.34
Server has Sun OS 5.10
I have like 19 printers but only 5 HP CB516A are having this problem.
The Print Message displayed is :
Start: fpec4050-2729 Tue Nov 11 15:41:18 EST 2014
End: fpec4050-2729 Tue Nov 11 15:41:18 EST 2014
Its not a major issue but its a nuissance and wastes pages and ink
Any assistance for a resolution to this would be helpful.
Thanks.@deff
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
L7680 Ejects Blank Page before and after print job
My L7680 recently started to eject a blank page before and after a print job; seperator page option is NOT selected. I tried all the suggested trouble shooting points in the HELP section but none have solved the issue.
This question was solved.
View Solution.The setup button on the printer had a choice to return to all factory defaults - that solved the problem but it does take yoiu back to starting again to set other choices you may have made since starting toi use the devise.
-
M1522nf feeds one bland page before and after each printing.
My HP m1522nf will feed one bland page before and after each printing.
This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?
Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian. -
Can I print before and after on the same page?
Hi everyone.
I'm really proud of my editing on a particular image. I want to print the before and after on the same page, just like I can see the before and after side-by-side in the Develop mode.
Is this possible?
Thanks for your help.Yes but you will need to make a virtual copy by going to the menu:
Photo >> Create Virtual Copy
Then open copy 2 in the Develop module and from the history panel change the setting to the time of import (usually the bottom of the list) or use the re-set button to get back to the original file from camera.
You can then select copy 1 & 2 and go to the Print module to set up your page with both images. -
An extra page prints before and after a page with the data, why?
If I go to www.allrecipes.com, select a recipe and click on the Print button, FF prints an extra blank page before and after the recipe. The recipe is short and easily fits on a single page. I've changed all the print settings so that even the Header & Footer info is set to "Blank".
I don't understand why blank pages are generated, but I can help you with a quick hack if you like. This will strip off everything but the actual recipe area so that you can streamline the printout.
After you load the page and select your options:
* Open Firefox web console using Ctrl+Shift+k
* Next to the caret (>) paste the following script then press Enter to run it:
var rectbl = document.querySelector(".pageback table.recipeprinttable"); document.body.insertBefore(rectbl, document.body.firstChild); while(document.body.children.length>1) document.body.removeChild(document.body.children[1]);
* Close the web console by pressing Ctrl+Shift+k again
When you preview the page, it should look ready for printing. Any luck?
Obviously that's not very convenient if you print a lot of recipes from this site, so you could save the script as a bookmarklet. Here's how:
First, copy this slightly modified script (select, Ctrl+c):
javascript: var rectbl = document.querySelector(".pageback table.recipeprinttable"); document.body.insertBefore(rectbl, document.body.firstChild); while(document.body.children.length>1) document.body.removeChild(document.body.children[1]); void 0;
Next, if you are not displaying the Bookmarks Toolbar, you can display it using either:
* right-click a blank area of the tab bar > Bookmarks Toolbar
* tap the Alt key > View menu > Toolbars > Bookmarks Toolbar
Right-click on the Bookmarks Toolbar and choose New Bookmark.
Paste the code into the Location box (the second box).
Then type a useful name in the Name box (e.g., AllRecipes) and click Add.
Now, when you want to hack the page, click the button to run the script. -
In my class i am suppose to do a before and after shot, how do i have two photos on one page
before and after shots..how do i put two photos on one page?? please help
Good day!
As Photoshop is not a page layout application but primarily image editing software the concept of "page" has limited relevance.
Anyway, you could increase the canvas (Image > Canvas Size) and place the other image (File > Place …) or drag and drop it.
Or create a new image and place both images. Whether doing so as Embedded or Linked Smart Objects makes more sense depends on your workflow, I guess.
File > Automate > Contact Sheet II would be another option.
Regards,
Pfaffenbichler -
Printing count of records before and after a command in a PL/SQL
Hi: I have the following PL/SQL script
declare
l_sysdate date := sysdate;
begin
INSERT INTO a_mnsnotes SELECT * from mnsnotes where TKT_NBR in (
select TKT_NBR from mnsinterface where MNS_STATUS=5 and CLOSED_DATE < (((l_sysdate-30) - to_date('01-JAN-1970','DD-MON-YYYY')) * 86400));
delete from mnsnotes Where
TKT_NBR in (select TKT_NBR from mnsinterface where MNS_STATUS=5 and CLOSED_DATE < (((l_sysdate-30) - to_date('01-JAN-1970','DD-MON-YYYY')) * 86400));
commit;
end;
/I want to assign the number of records in the two table (a_mnsnotes and mnsnotes) to two variables so I can print in one line the numberof records for both tables before and after the procedure. How do I set the output of a sql command (select count(*) from mnsnotes) to a variable within the pl/sql?
Thanks
RaviAlso I'm guessing this:
(((l_sysdate-30) - to_date('01-JAN-1970','DD-MON-YYYY')) * 86400);
is because closed_date is stored as number of seconds since 01-JAN-1970, which should be turned into a date ASAP. Never store dates as anything other than DATE datatype (or maybe TIMESTAMP in more recent versions).
It's not right, as sysdate will have a time component so if this code is run at 8am it will give different results to if it is run at 9pm. And not all months have 30 days.
Have you considered TRUNC(add_months(sysdate,-1)) instead of l_sysdate-30 ? -
Bug: Before and After Margins Layout with section starting in right page
Hi,
I am using the Spanish version of Pages 09. I have observed that when I start a new section, I have no problems setting the layout margins (right, left, before, after) of this section.
But if a set that the new section must start in a right page, then the "before" and "after" margins of the layout doesn't work.
Is this the same in English versions of Pages?
Regards,I see what you are saying.
The problem is Pages seems to have a memory of how you arrived at that layout.
When I construct the pages, it is correct.
I am trying to find out what is interacting in your layout to cause this to happen. It is like there is a hidden inaccessible layout break on the blank inserted page.
I have been tearing my hair out trying to work out what triggers it off. As I experimented with the combinations of settings in Facing pages, Section layouts and which page it starts on, it erratically switches back and forth.
This is why I gave up on Pages years ago as a serious layout tool. It has too many of these raw, poorly thought out interactions. I use a lot of different applications and none of them, that I can think of, have so many of these mind twisting raw oddities. Odd for a supposed user friendly application.
All the rest are pretty literal, you apply the settings and end up with a logical result of those settings. If the result is not what you wanted it is a matter of tracking what is interacting with what and straightening it out. Pages has the annoying "design" of inexplicably greying out functions for no stated reason, that prevents correction. Or hiding the access to the tools to those settings. You can only get to some of them if you have explicitly done something to make them possible. The rules as to what that "something" is, are not apparent nor in most cases explained in the User Guide or the User Interface.
There may be a "reason" why the function is greyed out but it is not revealed to the user without an enormous amount of detective work and as in this case my sleuthing abilities are failing me completely. I might try it again tomorrow after a rest (it is very late here). Either way it is a huge time waster.
This is fundamentally bad User Interface design and what I have railed against since Apple changed shifts, bringing in the OSX programmers who never really got the polished UI of the original Mac OS and have been cooking with Fanta* ever since.
Peter
* This is an anecdote originally told by Peter Russell-Clarke, a well known and creative Australian chef back in the 70's. He was berated in the street by a woman who told him that his recipe for +Duck à l'orange+ was "disgusting". When he cross examined her, he found she didn't eat fresh fruit so had made the orange sauce with Fanta.
I use this to try and get the message over to clients when they insist on "substituting" material because "what's the difference". The trouble with people who can't tell the difference is that they rarely ever do, no matter how carefully it is demonstrated to them. -
I dropped 2 photos side by side (before and after shot) in Pages.
When I went to upload the photos on a website, message said
"Not an allowed file type". I then converted the Pages document into a PDF,
but that didn't work either. Is there a way to convert it to a JPEG? I didn't see
that as an option on scroll bar.Hi iris117,
Welcome to the Support Communities!
One thing you can do if you can't just upload the photos individually, is to take a screen shot of your Pages document. Here's how:
OS X Mavericks: Take pictures of the screen
http://support.apple.com/kb/PH14212
Cheers,
- Judy -
5.2 Pages, how to create white space before and after paragraphs?
Hi everyone,
I'm having a very frustrating time with the new 5.2 version of pages after upgrading from a prior version. In the previous version, you could easily adjust the exact amount of white space before and after each paragraph. You were able to do this from within the inspector, but for the life of me, I cannot find it ANYWHERE in the new version and I'm ripping my hair out trying to find it.
Surely you must be able to control the amount of space before and after each paragraph? It's totally useless to me if I can't; I want to be able to format my documents how I want; ie. plenty of white space between paragraphs and list points, not all bunched up together.
Someone please help me! Thank you so much!Try telling Apple that. Start by rating/reviewing Pages in the App Store.
I have been told repeatedly by Apple staff that the new User Interface makes it "Much simpler".
When I ask how? …and point out how many (more) hidden steps there are, they don't want to talk anymore.
Apple's standard response to just about everything lately, unfortunately.
btw If you have the choice, use Pages '09 instead. Less buggy and way more features, better laid out.
Peter -
Hp 5510 won't print black before and after installing new cartridge. have done specified checks.
HP Photosmart 5510 won't print black before and after installing new cartridge. Have done specified checks.
sueali301 wrote:
Been through all steps. Cannot find levers.The printhead on the Photosmart 5510 is not removable. For the Photosmart 5510 the troubleshooting steps in the document here may help. Especially make sure the vents are cleared. If that does not resolve the issue then resetting the printer as described in the post here may help. If this does not resolve the issue then read the entire thread here and try requesting reset instructions. If your printer is under warranty I suggest you contact HP for warranty service. If you are in the US call 1-800-HPINVENt, elewhere see the contact information here. -
Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." Even after closing and reopening the program, the print command is greyed out so I cannot select any printer. This also happens with a Brother laser printer. Both printers will produce a test page out side of the Adobe product. Help!
I cannot get any help either. I get the message "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." I have reinstalled all drivers, powered off/on all printers (2 of them - a Brother HL - 4040cn and an Epson Stylus Pro 7890 - which all worked fine until this morning). There appears to be no path to a solution. I have read all the forums and tried about 20 different suggestions all to no avail. Reboots, changing cables, reinstalling printers and drivers and Photoshop CS6 - ALL TO NO AVAIL. On a macbook pro retina with 10.10.3. This issue is out there and some get solutions - but not all - that's my crowd...the not all crowd. I have yet to be able to print from CS6 any more. This is a show stopper and my patience is wearing thin. And I'm tired of stupid questions like "is your printer powered on?" give me a break. This appears to be an adobe photoshop cs6 problem - as I can print from every other application. Anyone have any ideas? Adobe should have something?... Adobe system info below:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Mac OS 10.10.3
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2300 MHz
Built-in memory: 8192 MB
Free memory: 4665 MB
Memory available to Photoshop: 7059 MB
Memory used by Photoshop: 70 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
OpenCL Version:
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 2
Display Depth:= 32
Display Bounds:= top: 1072, left: 140, bottom: 1950, right: 1580
Video Renderer ID: 16918311
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
OpenCL Version: 1.2 (Feb 27 2015 01:29:10)
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 1050, right: 1680
Video Renderer ID: 16918311
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 92629107631240972642
Application folder: KerrysHD:Applications:Adobe Photoshop CS6:
Photoshop scratch has async I/O enabled
Scratch volume(s):
KerrysHD, 232.6G, 19.7G free
Required Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
Primary Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Plug-ins:
Additional Plug-ins folder: not set
Installed components:
adbeape.framework adbeape 3.3.8.19346 66.1025012
AdbeScriptUIFlex.framework AdbeScriptUIFlex 6.2.29.18602 66.490082
adobe_caps.framework adobe_caps 6.0.29.0 1.276181
AdobeACE.framework AdobeACE 2.19.18.19243 66.492997
AdobeAGM.framework AdobeAGM 4.26.17.19243 66.492997
AdobeAXE8SharedExpat.framework AdobeAXE8SharedExpat 3.7.101.18636 66.26830
AdobeAXEDOMCore.framework AdobeAXEDOMCore 3.7.101.18636 66.26830
AdobeBIB.framework AdobeBIB 1.2.02.19243 66.492997
AdobeBIBUtils.framework AdobeBIBUtils 1.1.01 66.492997
AdobeCoolType.framework AdobeCoolType 5.10.31.19243 66.492997
AdobeCrashReporter.framework.framework AdobeCrashReporter 6.0.20120201
AdobeExtendScript.framework AdobeExtendScript 4.2.12.18602 66.490082
AdobeJP2K.framework AdobeJP2K 2.0.0.18562 66.236923
AdobeLinguistic.framework 17206
AdobeMPS.framework AdobeMPS 5.8.0.19463 66.495174
AdobeOwl.framework AdobeOwl 4.0.93 66.496052
AdobePDFL.framework AdobePDFL 10.0.1.18562 66.419471
AdobePDFSettings.framework AdobePDFSettings 1.4
AdobePIP.framework AdobePIP 6.0.0.1654
AdobeScCore.framework AdobeScCore 4.2.12.18602 66.490082
AdobeUpdater.framework AdobeUpdater 6.0.0.1452 "52.338651"
AdobeXMP.framework AdobeXMPCore 66.145661 66.145661
AdobeXMPFiles.framework AdobeXMPFiles 66.145661 66.145661
AdobeXMPScript.framework AdobeXMPScript 66.145661 66.145661
ahclient.framework ahclient 1.7.0.56
aif_core.framework AdobeAIF 3.0.00 62.490293
aif_ocl.framework AdobeAIF 3.0.00 62.490293
aif_ogl.framework AdobeAIF 3.0.00 62.490293
AlignmentLib.framework xcode 1.0.0.1
amtlib.framework amtlib 6.0.0.75
boost_date_time.framework boost_date_time 6.0.0.0
boost_signals.framework boost_signals 6.0.0.0
boost_system.framework boost_system 6.0.0.0
boost_threads.framework boost_threads 6.0.0.0
Cg.framework NVIDIA Cg
CIT.framework CIT 2.0.5.19287 145486
data_flow.framework AdobeAIF 3.0.00 62.490293
dvaaudiodevice.framework dvaaudiodevice 6.0.0.0
dvacore.framework dvacore 6.0.0.0
dvamarshal.framework dvamarshal 6.0.0.0
dvamediatypes.framework dvamediatypes 6.0.0.0
dvaplayer.framework dvaplayer 6.0.0.0
dvatransport.framework dvatransport 6.0.0.0
dvaunittesting.framework dvaunittesting 6.0.0.0
dynamiclink.framework dynamiclink 6.0.0.0
FileInfo.framework FileInfo 66.145433 66.145433
filter_graph.framework AdobeAIF 3.0.00 62.490293
hydra_filters.framework AdobeAIF 3.0.00 62.490293
ICUConverter.framework ICUConverter 3.61 "gtlib_3.0" "." "16615"
ICUData.framework ICUData 3.61 "gtlib_3.0" "." "16615"
image_compiler.framework AdobeAIF 3.0.00 62.490293
image_flow.framework AdobeAIF 3.0.00 62.490293
image_runtime.framework AdobeAIF 3.0.00 62.490293
LogSession.framework LogSession 2.1.2.1652
mediacoreif.framework mediacoreif 6.0.0.0
PlugPlug.framework PlugPlug 3.0.0.383
UpdaterNotifications.framework UpdaterNotifications 6.0.0.24 "6.0.0.24"
wrservices.framework
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE -
Layout margin "Before" and "After settings
I'm working on a document where I sometimes need to alter the preset upper and lower margins of a given page. I can use the "Before" layout margin setting to move the text box tops downward but trying to move the bottoms of the boxes upward using the "After" setting seems to do nothing. Isn't that what that setting is for?
G5 1.8 Dual Mac OS X (10.4.7) MacBookThe Before and After paragraph settings are for adjusting the spaces between paragraphs. Put you curser in a paragraph and adjust the Before setting and the space between that paragraph and the preceeding one increases or decreases. Adjust the After setting and the space between that paragraph and the next one changes accordingly.
If you want to adjust the margins of the page, as well as the header and footer, use the Document Inspector.
If your're using text boxes, just move the box as needed. To move the entire box it should be set for Fixed on Page.
Walt
Maybe you are looking for
-
Errors on my web site started with Flash Player Release a few days ago (Mar 28, 2012)
Hi, I have a Flash based video player on my website. This was designed and implemented based on an article vy Lisa Larson-Kelley. It has run flawlessly for several years. But, when I installed the lastest release of Flash Player a fedw days ago (M
-
Can I backup two devices to one iCloud account?
I have an iphone and an ipad using the same user id. I backup my iphone to icloud, but can I also back up my ipad to the same iCloud account? Nathan
-
I want to open a html file in word and save it as docx programmatically using activex
can i open a .html file in microsoft word and save it as a .docx file programmatically ?
-
How can I use the m4p music files in e.g. Power Director
Power Director cant read the m4p format and converting them in a readable format like wav is blocked by the itunes software. Is there any possibility to import these files in Power Director ? Thanks fo help. Manfred
-
im changing my media card from a 2gb to a 16gb and i want to transfer everything to the new media card, but i want it in the same order. is this possible? Solved! Go to Solution.