Psc 1350 prints text with shadow in Windows 7

My all in one psc 1350 prints the text with shadow since I upgraded to Windows 7, the buttons do not work, but the rest does, any suggestions about how I can correct the shadow issue? 
I tried to upgrade the driver, but with no success

My guess would be this is due to a color cartridge with misdirected nozzles.  Printing from PDF or a web page would print the text as a graphic which would use the color cartridge.  Try the following:  remove the color cartridge and print a page that previously was shadowed.  Does it now print correctly?  If so the issue is the color cartridge and running a cleaning cycle may help.  It is also possible that the color cartridge has failed electrically, causing it to fire nozzles inappropriately.  In this case a new cartridge would be required.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • How to Print text in two main windows

    For printing label have created two main windows on a page. calling function write_form In ABAP Program under do loop for two times. 
    but program prints only one window. why is it so? how can i print text on two windows.
    do 2 times.
      COUNT = COUNT + 1.
    loop at itab WHERE DEPTT LT 200.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            ELEMENT  = 'TEST'
            FUNCTION = 'SET'
            TYPE     = 'BODY'
          WINDOW   = 'MAIN'
          EXCEPTIONS
           ELEMENT   = 1
           FUNCTION  = 2
           TYPE      = 3
           UNOPENED  = 4
           UNSTARTED = 5
           WINDOW    = 6
           OTHERS    = 7.
      endloop.
    enddo.
    Please guide.

    Since the information is variable and coming out of the print program, I can assume you want to print many labels but two to a page. Also, any page numbering, etc will need to be updated. This is easily accomplished with SAPScript but a feature people rarely use I believe. Here are the simple steps:
    1) On the Windows Screen: Creat a main window for the size of the label, etc knowing that you will be putting multiple windows on a page. For example, if page size is 8.5 x 11, maybe your window size is 6 X 4 or something similar. You only need one main window defined.
    2) Now go to Page Windows Screen. Add a window MAIN and down at the bottom where it says Window Type put in MAIN. Next to this field is a little field about two characters long. In here put in '01'.
    3) Now Add another window MAIN and down at the bottom put in '02'.
    Hopefully this gives you the idea. I've done this with up to 30 small windows in order to print variable window for labels on label stock such as Avery 8167, etc. 
    Good Luck!
    Tim Stadler
    Menasha Corporation

  • Printing Text with multiple Lines

    Hello,
    i want to print a list and in that is text with multiple lines.
    In the PrintPreview and in the Printout i get only one line.
    How is the best way to do this?
    Thank you,
    Markus
    Private Function Print_Remarks_Control_Get(ByVal pstrText As String) As TextBox
    Dim TextBox_Out As New TextBox
    With TextBox_Out
    .Text = pstrText
    .HorizontalAlignment = Xaml.HorizontalAlignment.Left
    .VerticalAlignment = Xaml.VerticalAlignment.Top
    .FontSize = 16
    .Margin = New Thickness(15)
    .AcceptsReturn = True
    .MinWidth = 800
    .MinHeight = 600
    End With
    Return TextBox_Out
    End Function
    Sub PrintPageList_Prepare()
    Dim i As Integer
    Dim objVM As clsTextVM
    Dim lstText_List As ObservableCollection(Of clsText)
    Dim ctrPrint_StackPanel As StackPanel
    Dim ctrPrint_Title As TextBox
    Dim ctrPrint_Description As TextBox
    Dim ctrPrint_Remarks As TextBox
    Dim objText As clsText
    mPrintPageList.Clear()
    objVM = DirectCast(Me.DataContext, clsTextVM)
    lstText_List = objVM.CustomClass_List
    ctrPrint_StackPanel = Print_StackPanel_Get()
    For i = 0 To lstText_List.Count - 1
    objText = lstText_List.Item(i)
    If objText.Name.Length > 0 Then
    ctrPrint_Title = Print_Title_Control_Get(objText.Name)
    ctrPrint_StackPanel.Children.Add(ctrPrint_Title)
    End If
    If objText.Description.Length > 0 Then
    ctrPrint_Description = Print_Description_Control_Get(objText.Description)
    ctrPrint_StackPanel.Children.Add(ctrPrint_Description)
    End If
    If objText.Remarks.Length > 0 Then
    ctrPrint_Remarks = Print_Description_Control_Get(objText.Remarks)
    ctrPrint_StackPanel.Children.Add(ctrPrint_Remarks)
    End If
    Next
    mPrintPageList.Add(ctrPrint_StackPanel)
    End Sub
    Private Sub OnGetPreviewPage(sender As Object, e As GetPreviewPageEventArgs)
    ' Das ist die MessageBox
    ' Windows.UI.Popups.MessageDialog()
    PrintPageList_Prepare()
    mPrintDok.SetPreviewPage(e.PageNumber, Me.mPrintPageList(e.PageNumber - 1))
    End Sub

    Yes, not only RichEditBox but also RichTextBlock can also do this. Besides TextBox also have TextWrapping functionality.
    -James
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Cannot get my PSC 1350 printer operating anymore from OS 10.6.3

    I have been facing quite an unexpected regression over the last couple of days
    My kid told me the scanner option of PSC 1350 All-in-One was not working anymore. After some basic testing I arrived to the same conclusion.
    I re-installed the printer using the HP installer disk (dated 2005) and could restore the scanner function successfully. Did a Print Test from the HP Director S/W and the test printed successfully. Unfortunately the normal print function from an application (TextEdit, Safari, etc.) regressed and I fail to get it working again until now.
    Self-test of the printer is OK. I also repaired permissions with the Disk Utility. But no improvement.
    Actually the symptom was when I tried to print, the file falls immediately in the queue list with error. But no error code or anything that could help to follow a track appears, this is why I am now begging some help to Mac wizards
    I tried so many different configurations that I pass the historical details. This is driving me mad and this is where I am presently : I uninstalled all HP software and refreshed the printers list. Then I retrieved a PSC 1300 series driver for Mac OX X 10.6 on HP service website with a light of hope that it could finally fix the problem : Inkjet710_6_Print_Mac1.dmg
    I ran installation SW and it reported successful installation.
    The problem is now that I cannot retrieve any trace of the HP Installer presumably installed and the HP procedure never says clearly in which folder the HP Installer is due to copy.
    Could anyone provide me with a clean procedure to :
    1. check where the HP Installer may have been written, as running this HP Installer may hopefully be the end of my problems
    Else
    2. how to cleanse trace of any previous printer installation
    3. how re-install from scratch the PSC 1300 series driver in a way that it prints successfully under Mac OS 10.6.3 other than using the HP Installer above.
    Thanks in advance to who may help me to get out of the maze.

    Gilou, I would suggest calling HP tech support, as this appears to be a problem with the printer, rather than with Snow Leopard. Good luck!

  • Printing differences with LR4+ between Windows 8 and iMac

    Hi. I have using my iMac running the latest version of OS-X with LR printing currently to an Epson XP-600 with pretty good results, that is, the print matches the screen with few exceptions.
    I recently installed my second allowable copy of LR4 to a new HP laptop running Windows 8 and the prints, using the same photos, are way off both in darkness and in color shift. The Printer interfaces look different but many of the options are the same. I currently let the printer control the prints (with either computer) but tried separate profiles as well. No real change. Here is the important part... The only other program I have on the new Laptop that can print photos is Microsoft PowerPoint and the photos printed with PowerPoint are identical to the photos printed in LR on the iMac! So... somehow the Windows LR is changing the parameters.
    I have compared settings between the two computers (only one opened at a time) over and over and ran through a set of ink cartridges trying to match either LR/iMac or Windows PowerPoint to the LR Windows photos to no avail. Am I missing something obvious? Why don't the LRs print the same with the same settings regardless of the operating system? Both are 64 bit computers. Any thoughts would be appreciated... thanks! Andy

    Thank you for replying, Rikk. However I respectfully disagree with you. I wasn't comparing the printed photo to the laptop monitor but to the other computer's printed photo (and to the iMac's monitor by extension). Big difference. I deliberately let the printer manage color because with the iMac, the print matched the monitor without profile control. In Windows, I also let the printer manage color so LR, let alone the monitor, should have no influence on color, much like the PowerPoint print as you mentioned. The printer, if printer settings are the same, should produce the same print in OS-X or Windows 8. The PowerPoint print matching the LR print on the Mac proves this to be true IMHO.
    To put it another way, I'm not trying to match the Windows print to the Laptop monitor, which is not only uncalibrated but somewhat irrelevant. The two monitors look nothing alike with regard to color. Neither monitor should actually influence the print when compared to the other print using identical printer settings with LR set to printer control.
    Please do not think I'm trying to be contentious here, I'm not, but to put it a third way, If I print the photo from another program (iPhoto) on the iMac, it looks identical to the print in LR on the iMac. Because the printer is in control. On the Windows computer, printing in and out of LR, with printer settings the same, do not. That's what I'm trying to find out.
    Finally with respect to your last sentence, that's my whole point. I believed I had turned off color awareness in LR on both computers. I don't need it. Apparently, I didn't turn it off on the Windows computer and I would love to know why it didn't go off?
    Thanks, Andy
    PS You deserve an explanation as to why I use the printer control and no profiles. The answer is somewhat serendipitous: With this particular printer (and I've had many), when the printer is set to manage the color, the prints, for whatever reason, very closely match the iMac monitor (which is calibrated), even moreso than with printer color OFF and ICC profiles employed. I've tried them all. I only use one kind of paper. If I call up a photo of my grandchildren, the print matches the iMac display close enough for my needs. What I see is what I print. Why change it?

  • Wirless Print Servers with Mac and Windows

    I am very new to mac..macbook purchased just this week..facing some challenges but learning at the same time..I have my macbook running thru my wireless network on a Motorola SB4100 Cable modem, D-Link DI 614+ Wirless Broadband router and a d-link DPR-1260 Wirless Print Server..previously I have been using a Windows Laptop..I guess it seems that D-Link print servers are only for Windows systems??? I looked at the manual and it doesn't mention Mac..haven't been able to figure out how to add a prt to the mac and I guess that is why?...you need a seperate print for the mac with it's own wirless prt server? or can you replace the cable modem and router with some apple base station that does everything but then can windows laptop work on the network and wireless prt??
    scott

    I doubt you need any additional equipment. It should be a matter of setting up using PrinterBut posting your question in the Tiger- Printing & Faxing forum area may get you a faster answer.
    http://discussions.apple.com/forum.jspa?forumID=756
    It should be a matter of setting up in Printer Setup Utility using the ip address of the server.

  • Screen print imac with bootcamp and windows 7 64 bit

    I have a new 27" Imac i7. I have boot camp installed and windows 7 64 bit. I have auto-cad installed for college. There are several assignments that require a screen print to turn in. I have not been able to figure this out. I have been using the snipping tool, but in certain instances i need a menu drop down included in the screen print. With the snipping tool the menu goes away. I have looked for some ways to do a screen print while in windows, and have been unsuccessful. I have a wireless apple keyboard, the shorter one. The F keys are enabled to be used as the real F keys without using the fn key on the windows side. So when i hit F10 for example it is the real F10 function. Does anyone have any ideas?

    I can get those keys to work if i make the keyboard use the shortcut keys that are listed on the top. For example, if i want to use the f10-f12 keys to control the volume without having to hit the fn key. If i set the keyboard up that way that key combo will work. But if i set up the keyboard to use the f keys really be f keys without hitting the fn key, it will not work. Would you know how to get it like that? I have tried just leaving the fn key out of that combo and it will not work.

  • No driver for HP PSC 1350 printer in Rendezvous

    Hi,
    Since updating to OSX 10.3.9, I can't seem to print via Airport Extreme. Printing via the USB port on my PowerBook is fine and when the printer is plugged into the Airport basestation it appears in the Rendezvous printer list but when I try to add it, I get a message saying "Driver Not Installed".
    I can't see how I can load a driver when all the printer software is loaded and it works OK from the USB on my PowerBook.
    Any ideas?
    Thanks
    Dave

    Having read some of the other postings from people with a similar problem, I've now tried a "hard reset" and uploaded the latest Airport firmware (5.5.1) but this hasn't made any difference - I still get the "Driver not installed" message when trying to add a Rendezvous printer.
    Where do I go from here? All this technology at my fingertips and I'm having to resort to plugging my printer into my PowerBook USB port if I want to print anything.
    Please help.
    Dave.

  • How to print Text with Java

    I am new to java, learning fast, lots of new stuff every day. i want to develop an application that can print a report (Text mostly eg. Like an Invoice) to a printer. i am searching the net still cant find nothing that i can understand. Help please

    To learn java printing, you may want to visit:
    http://java.sun.com/j2se/1.4.2/docs/guide/jps/
    or
    http://java.sun.com/docs/books/tutorial/2d/printing/
    Or you can download reporting tool, please visit:
    http://jasperreports.sourceforge.net/
    or
    http://www.elixirtech.com/
    Okie! God bless :)

  • PSC 1350 all-in-one not completing print jobs wirelessly with windows 7 64 bit

    I have a acer 5542 running windows 7 (64bit), connected wirelessly to an Orange Livebox hub, to which my HP PSC 1350 printer is connected (via USB cable) therefore using the Livebox as a USB printer server. This configuration has worked very well for my 2 XP laptops for the past year or two. I set up the printer on the windows 7 laptop by connecting it directly, via the USB cable, letting windows install it, and download the latest drivers, (although HP say they have no specific 64bit drivers for this printer, but the drivers they have, and that windows downloaded, work fine!) then i changed the port to the livebox ip address.
    All this worked fine (as on the xp machines), I printed out a spreadsheet, which worked fine untill it approached the end of the page, then just stopped. I troubleshot the printer which didnt return any sprcifics, Just that the print job had failed, and that it had rectified the problem, then the printer starts reprinting the same document, to the same point, (about 95% complete) and again stalls, and so the cycle continues. I have tried it with various different documents and photos, to the same ends. But if i connect the laptop directly to the printer, via USB, it completes the jobs fine
    I have posted on microsoft answers forums, but the one answer i have recieved (re installing everything) did not solve the problem. Although i am not too savvy on computers, i kind of get the feeling it is a spooling issue. (not processing or holding onto the last part of a print file! But its only a feeling!)
    any help would be very much appreciated

    Hi there,
    I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
    At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
    Hope this helps, have a great day!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Printing PDF with English & Chinese

    Hi experts,
    I have encountered a following problem: we would like to print texts with mixture of English and Chinese on a smartform converted to a PDF format. But the chinese is not printed properly. Could you please advise on how should the output device / output type be configured. What are the neccessary settings that have to be made?
    Thanks a lot for your hints.
    Tomas

    I got it to work. I have a process that sets an application level item(CUR_WO_NBR) to the current value of the text field holding the work order number(P150_WO_NBR). This process runs right before the branch to print the pdf. the pdf of course uses the application level item in its query (CUR_WO_NBR).
    - Ghoulies

  • Can't print from Adobe Acrobat 11.0.07 on my MAC OS 10.6 to HP PSC 1350.  Error: PSTOPDFFILTER/PSTOCUPSRASTER FAILED WITH ERR NUMBER 13.  How do I fix it so I can print?

    Can't print from Adobe Acrobat 11.0.07 on my MAC OS 10.6 to HP PSC 1350.  Error: PSTOPDFFILTER/PSTOCUPSRASTER FAILED WITH ERR NUMBER 13.  How do I fix it so I can print?

    i am getting the same error, suddenly, on 10.9.5

  • Print text file with labview 2011 and windows 7

    I am having some strange problem, hope someone out there knows the solution.
    We have a labview program running under windows xp, the program runs some test and print label from a local label printer. Last week, I have to upgrade the computer to windows 7 and all the sudden the printer will not print any more.
    The print vi is very simple. I am using the report function and I am attaching the diagram of that vi below. 
    If I use windows notepad to open that small text file, I can print fine. This means the printer driver itself is OK. However, if I print the same text file through Labview printing vi, from the printer's task list, I can see it does not recognize the char. From the attached png file, the top one is the task from notepad, it shows 2 pages and the bottom one is from the labview, it becomes 33 pages. 
    For the printer part, I use Generic / Text Only printer driver which comes from windows itself. And I am aslo attaching a sample of the text file, there are quite a lot of special char, it is for print bar code. When I tried to use labview print text vi to print general text from my computer to a regular printer, the vi works. So it seems Labview print can not handle the special char? Although it worked many years under windows XP in the past.
    Welcome to any suggestions!
    Thanks
    Attachments:
    print vi.gif ‏9 KB
    labview print bug.png ‏26 KB
    SerialLabel.txt ‏1 KB

    DGU wrote:
    where to check RAW or TEXT? the print report vi only asks for file name and printer name.
    When I print from notepad, everything just goes by default. This is a label printer, so I never need to specify printing parameter such as size, orientation, etc in the past
    Famous last words go something like this: "...never had to do that before."  Maybe you have to do that now.  It's worth at least comparing the defaults settings for bothe generic drivers.  It could save you a lot of headache if you notice something different.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • How can I install the HP PSC 1350 All-in-One Printer {Windows XP} w/o a CD?

    I'm having difficulty installing my AIO printer without a CD & I really would like to update the Driver as well... I'm so frustrated!

    Hi @glgaucher 
    I am sorry to hear that this has been a frustrating experience for you. I would like to help you obtain the full feature software and driver for your PSC 1350. Please use the following link to download and install the software; gc_w01_ENU_NB.exe.
    This download includes the HP Photosmart Software Suite (enhanced imaging features and product functionality) and Driver. If you only want the print driver (without the Photosmart Software Suite), it is available as a separate download named "HP Officejet and PSC Basic Software and Driver".
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP PSC 1350 Series Printer will NOT print from the internet ~ but will print a word document.

    I have an HP PSC all-in-one PSC 1350 Series printer.
    the operating system is Windows XP to the computer it's USB connected to.  
    Earlier this week I was having troubles with the WIFI and IT helpers changed setting on the modem and the router. 
    Still wouldn't work, so a new router is being sent to me.
    To use the internet, I currently have the ethernet cord directed connected to the computer. 
    These past few days the printer worked both printing word documents AND print jobs from the internet.
    NOW IT WILL PRINT NOTHING FROM THE INTERNET.  (ex: email messages, invoices, statements etc)
    I've tried again after restarting the computer, unplugging and restarting the printer and still it won't work.
    The tiny printer icon appears briefly in the bottom tool bar, acting like it wants to print, but then nothing happens.
    Please advise. 

    Hi there,
    Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Maybe you are looking for