PSC 1410 printer all in one

I have a Hp PSC 1410 all in one printer wired to my desktop. How can I use it with my wireless laptop. Its on there but when i click it is is offline and I cant change it to online. Can use it fine on the desk top but I had anew hard drive pit in my desktop last week and since then something has changed that I cant get my printer to be online. on my laptop. Hp helped me set it up on my laptop when I got the laptop but now they wont help me as they say this printer has no support. I dont believe that. Wanted to sell me a new printer which i refused as this printer works fine.
Anybody know an answer to this problem?

Do you have the printer wirelessly connected to your network or ethernet connected to a router?
If so, then you should be able to print from the wireless notebook.
If you just replaced the harddrive, then it may be necessary for you to perform a new install of this printer. I would uninstall the old software and re-install with the most up-to-date drivers available here.
Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Similar Messages

HP PSC 1410-v All-In-One - Doc. failed to print

My HP All-In-One 1410-v printer works fine most of the time. However, it used to print my paycheck stub from Intuit's Payroll Website. Suddenly it refused to print that information. it will print the first three lines and then I receive an error message on my computer in a pop-up box that says:
The Document failed to print
Document Neme: FLASH
Printer Na: HP PSC 1400 Series
Time Sent: (the current time)
I have talked to Intuit.
My printer prints everything else fine.
I tried downloading the information to Adobe (an option available from the site) and then printing it from Adobe; I receive the same message.
I had an unrelated computer problem and my hard drive was wiped clean. I reinstalled printer from CD. Still will not print this document.
I downloaded the check utility and the check indicates I have the most up-to-date driver.
I don't know what else to try. Anyone have (and solve) this problem? Ideas? Suggestions?
Thanks

My previous post corrected:
This works successfully (OpenPrinting/MacOSX/hpijs) BUT when I originally installed it, it would only print in colour i.e. it only used the colour cartridge to print, even to print black/white or greyscale. I solved the problem - I thought - using the advice from http://tech.ifelix.net/1300.html even if my printer was on the "compatibility list".
However, I recently installed the latest version of the OpenPrinting software http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs#Printers to find that I have reverted to the colour cartridge only use! I don't seem to be able to resolve the problem this time around. Can anyone help?

After upgrading to mavericks how can I connect my HP PSC 2510 photosmart all-in-one printer to my mac?

After I upgraded my macbook air to mavericks, my HP PSC 2510 photosmart all-in-one printer doesn't connect to my macbook air. When I try to launch the all-in-one installer from the HP CD that came with the printer, I get a message saying it cannot open because powerPC is not supported. The HP site has not been helpful in resolving this issue. My understanding is I first must connect the printer to the wireless system (I use airport extreme) before using airplay for printer software upgrade.

Your suggestion is helpful, but after some digging on the HP site I found a detailed solution to my problem. The link is: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01749025&tmp_task=setupCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=303770

HP PSC 1410 PRINTER

I AM INSTALLED HP PSC 1410 ALL IN ONE SOFTWARE (AROUND 382 MB) BY DOWN LOADING FROM HP SITE. BUT I CAN'T TAKE PRINT. PRINTER DRIVER NOT INSTALLING.!! I CAN SCAN AND COPY. FROM THE SYSTEM
oPERATING SYSTEM : WINDOWS 7 PROFESSIONAL
PRODUCT NO " HP PSC 1410 PRINTER

Hi,
Please provide more clarity on this issue like what happens when you try to print, is there any error message? Is printer icon present under Devices and Printer.
Also you can try using Print Diagnostic Utility from the following link.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02072599&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Thanks,
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

HP PSC 1410 printing blank pages

I have recently installed windows 7 (32 bit) on my Asus G50 laptop. First thing i did was installing all the latest drivers from the HP website including the HP solution centre and other software. Now here's my problem:
Whenever i try to print anything through 3rd party software (i.e. browsers, Word, Notepad etc.) my PSC 1410 'prints' blank pages. The reason i say print is because i can hear the printerhead moving as if it was really printing and the paper gets pulled through in short steps like it normally would. There is however no ink on the pages.
Now here's the weird thing. When i check my ink levels in the solution centre, both color and black are over 75%. It get's even better now: When i use solution centre to print a test page or clean out the inkcartridges it works fine! It seems like all programs outside of HP software have problems communicating somehow.
i'm pretty sure i have the latest drivers installed (downloaded them 3 days ago). I'm running the 32bit version of Windows 7, kept nicely up to date, on an Asus G50v notebook. some technical specs for the lovers:
Intel Core 2 Duo T9400 (2.53 GHz)
Nvidia GeForce 9700M GT
4GB DDR3 RAM

Hello MPQCNC,
I seen your post on having issues with your Photosmart C7280 printing blank pages. I would like to help you.
I have located a troubleshooting document that I recommend you follow to help resolve the problem.
Troubleshooting Print Quality Issues
I hope this helps you, if you have any other questions please feel free to respond.
Take care,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Recommendations for printer/all in one for use with 10.9+? Help!

Does anyone have recommendations for a printer/all-in-one that will work with Mavericks? Monochrome (b&w) laser printer/all-in-one preferred. This is for a small office (5-8 people). Frequent pdf printing and 30+ page documents.
Right now I'm looking at Brother MFC-7860DW (might need something with a larger capacity), Brother MFC-8710DW, Epson WorkForce WF-M1030 (again, may need something w/ larger capacity), and Canon Laser imageCLASS MF4770n or Canon Laser imageCLASS MF4890dw. Also have looked at Canon imageCLASS MF6160dw but reviews are iffy. Any suggestions would be greatly appreciated!!

Thanks for your help and input, diggernyc. If I was going to say that my question had been answered I certainly would have chosen your response and not my own. It seems silly that you can't undo marking a post as "solved".
If anyone has suggestions, they are still appreciated. Thanks!

C1400 printer - all-in-one trouble shooting

Hello, I've recently purchased the C1400 printer - all-in-one, and it started having problems.
For some reason whenever I try to print something (for instance, a simple 1 page document), the printer activates, then prints a single page with some weird code on the top, then starts printing endless amounts of blank pages until I hit the cancel button. (?)
I'm running mac 10.5
I open to any advise - thanks.

zaq12 wrote:
printer all in one 4360 e can i kleave it on all day
Hi,
Yes, you can leave it on for whole day, it will go to sleep mode when it has nothig to do. If you wish to save a bit of electricity cost, you can turn it off when not in use.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can i change the region for the printer all in one

Hp Deskjet 3050 series J610.
Error: Non Compatible Cartridges
i bought a printer all in one in mexico border, this had a 122 cartridges, but now i bought a new cartridges 61 in texas.
i install it but when i send to print appear a error that show "Non compatible cartridges", so i check them in HP site, the numbers are different like mexico and US, but the HP part number are the same for both, so i try to fix the problem i found a solution tha say that required change the region for the printer.
How can i do this?
Thanks.

Welcome to the HP Forum!
mrmartin wrote:
Hp Deskjet 3050 series J610.
Error: Non Compatible Cartridges
i bought a printer all in one in mexico border, this had a 122 cartridges, but now i bought a new cartridges 61 in texas.
i install it but when i send to print appear a error that show "Non compatible cartridges", so i check them in HP site, the numbers are different like mexico and US, but the HP part number are the same for both, so i try to fix the problem i found a solution tha say that required change the region for the printer.
How can i do this?
Thanks.
You will have to contact HP to have the region for yourr printer changed. A representative will explain how to do it.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I'm using windows 7 with a hp deskjet 3059A e Printer All-in-One J611n not scanning pc not found

My Deskjet 3059A e printer all-in-one J611n was working fine til my pc crashed. Now I can't get it to scan. Says computer not found & it is switched on to my pc via usb cable.... Help

Hello @terezaferreira , Welcome to the forums
I read your post about the scanning problems and I am here to help you out.
I would first suggest you restart the computer completely, and power reset the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Now with both the printer and PC powered on, run the Print and Scan Doctor from your computer and send me a screen shot of the results or write me back with the detailed results.
Try scanning from the HP Software on your computer, and also scan from the printer to your PC. Tell me if either ways worked and what happened!
Have a great Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printer all in one 4360 e can i kleave it on all day

printer all in one 4360 e can i kleave it on all day

zaq12 wrote:
printer all in one 4360 e can i kleave it on all day
Hi,
Yes, you can leave it on for whole day, it will go to sleep mode when it has nothig to do. If you wish to save a bit of electricity cost, you can turn it off when not in use.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP1512 USB Printer All in One

My Current printer an HP 1512 works OK as a single USB printer.I would like to add this printer to my Home Network using A Print Server,the only problem I have is finding a Print Server which will work with this Printer.I am told by TP-Link that their Print Server TL-PS310U hasnt been tested with My HP 1512 all in one printer,so cannot gime me a definite answer.Has any member had any experience of TP-Link Print Servers,or could suggest any other make that would definitely work?Any help appreciated Michael

zaq12 wrote:
printer all in one 4360 e can i kleave it on all day
Hi,
Yes, you can leave it on for whole day, it will go to sleep mode when it has nothig to do. If you wish to save a bit of electricity cost, you can turn it off when not in use.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP PSC 1500 printer all lights blinking and will not turn off.

HP PSC 1500 printer all lights blinking and will not turn off. I had just put a print cartridge in and the problems started. All lights began blinking including the on/off. The on/off button would nor respond. (just kept blinking)
I opened the printer door and the cartridges did not move back to the right so they could be examined.

Hi mlbroad,
I understand that you are having an issue with your printer, and certain lights are blinking. I have included the document 'Blinking Lights'. This document will take you through the different combination of lights that are blinking, as well as steps to provide a solution.
If this does not resolve the issue, please let me know exactly what lights are blinking.
Please let me know if this resolves your issue, thank you.
I worked on behalf of HP

New printer all in one

Hi everyone,
i need to buy a new printer all in one (fax and scanner) with WiFi.
I want that it's compatible with AirPrint (i have a iMac with 10.8.3). Price up to €100.
Any advice?
Thank you.

There is a great list of compatible printers at > AirPrint basics
Everyone has there favorites brand(s), mine are Epson and Canon in that order.

Airport Express with HP PSC 1410 printer

I have an airport/airtunes express and have an HP PSC 1410 all in one printer. I can't get it to work as my "network printer" I was surfing the Apple website looking at FAQs and it directed me to the HP site. There are a list of known printers that were compatible with airport express. Mine didn't show up....BUT, the information was very vague. Does anyone know if this will work, or is the "all in one" messing things up? I assume you can't scan and receive data via 802.11b from the Airport Ex.
Thoughts?

When connected via an Airport Express or Base Station, basically all you can do with a printer is "print". It is *not possible* for any make/model of printer to do any of the following:
1. scan or fax on with a multifunction printer
2. check ink levels, or any other printer status
3. clean print heads
4. use any printer utility software provided by the printer manufacturer
Paper choices are usually a function of the printer driver, and are therefore always available. Some photo printers won't allow options like borderless printing to work - but issues like this seem only to be known through discussion forums like this since they are rarely publically documented by the printer manufacturers.

Hp psc 1300 series all in one driver

my hp 1300 series printer is not having drivers, i have tried in many ways. but useless effort. At last i came here for all of our friends support, those who are using these above hp 1300 series all-in-one printers. friends please help me in this issue to get a driver for my printer. Thanking you all.

Hi talamala,
if you go to the link below, and under "detect MY Product" on the right, click find now, this should hopefully identify the driver you need
http://www8.hp.com/ie/en/drivers.html
if that doesn;t work, please let me know what OS you are using and the exact model number of your printer I think psc 1300 is the series number not the model number.
regards,
Na-Vi
I am an HP employee, I am speaking for myself and not on behalf of HP.
Click the thumbs up to say "Thanks." Mark Accepted Solution on the post that solves your problem

PSC 1410 printer all in one

Similar Messages

Maybe you are looking for