PSC 1410 shows E and all leds blinking

Hi there everyone!
I'm not an english speaker, but I will try to do my best in order to explain myself as clear as possible. This is the fact, I recently acquired a PSC 1410 a year ago. I know the previous owner bought it on 2006 and it was working properly till a month ago when the tricolor cartridge blew up inside the printer, literally. I turned on the printer and it showed me the Error message and all the panels led were blinking. I disconnected it from the wall outlet. So, I disassembled the printer and it was a mess, there was ink all over the interior, including the circuits board. Then I cleaned everything very carefully, and finally I assembled the pieces back together. When I tried to turn on the printer again I received the same Error message and all the leds blinking.
I've been looking for a service manual on the web or something to solve this, but I was unable to achieve my goal. I can not indulge me and buy another printer, I can not reach HP customer service, and nobody knows how to fix this problem here. Moreover I feel like I have a little kind of affection for this appliance.
Now my question: is this problem fixable? Can I fix it on my own?
Thanks a lot in advance.
CULEBRA83

All lights blinking on the printer would indicate a fatal error situation. Here are couple of things you can try:
1) Perform the steps under the section 'All lights are Blinking' in the document below:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00476152
2) Follow the steps in the document below to 'Clean the gold-colored contacts in the print carriage' and cartridge contacts.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00094661
Note: Ensure that the printer is disconnected from power while performing the step.
Hope this helps.
Say thanks by clicking the Thumbs up icon in the post
Please mark reply as "Accept as Solution" if it solved the problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP

Similar Messages

  • WRT120N - Disconnects and all LEDs blinks after firmware update

    I have WRT120N, i recently updated the firmware. 1.0.06. only my bad is i done it wirelessly. so its basically interrupted.
    I have tried, hard reset and power cycle and reinstall the firmware but still the problem occurs, this time its wired.
    it happens intermittently. i have tried pressing reset upon turn on and reinstall firmware on the bootloader. it stablized for a while but then disconnects and blinking stikes again. 
    is there anything i can do about this?

    Try this:
    http://compnetworking.about.com/b/2009/03/11/the-30-30-30-hard-reset-rule-for-routers.htm

  • WRT54G2 3 and Internet LED blinking

    I have a WRT54G2 v1 router.
    When power is attached the 3 and Internet LED are blinking. None of the other LED's are blinking.
    No other cables are attached to the router, just the power cable.
    Downloaded the latest firmware, set a static IP address on the laptop, attached a ethernet cable from the laptop to the router but cannot ping or get access to the router to update the firmware.
    Need suggestions as to what the 3 and Internet LED blinking means and what else I can try.

    Here is the latest and this will be done...
    I got back online (without the router, just direct connect to ISP with modem). Did a online CHAT at linksys.com/support. I asked the individual if the blinking LEDs were some sort of diagnostic code. He had never or could not find anything that suggested the blinking 3 and internet LEDs meant anything.
    So the Individual stepped me though the following (common set of steps with all I will assume.)
    No other cables are plugged into any of the router ports.I tried to reset the router. Held the reset button for 30 seconds... no change in which LEDs were blinking (still the 3 port and internet LEDs). Nothing happens with the power led.
    Held the reset for 60 seconds... no change.
    Held the reset button and plugged in the power supply, waited 30 seconds to release... no change.
    Held the reset button and plugged in the power supply, waited 60 seconds to release... no change.
    Asked me to plug in another power supply... could not do that, the router only came with one power supply.
    Asked me to connect router to a computer, step through process to setup static ip address.. attempt to ping router... nothing (was not getting a link light on the computer network card.)
    Finally said I would have to call customer service to get a RMA.
    Called customer service, was told to access the linksys.com/support and use the warranty online system to request a RMA.
    Went online, got to the RMA request, wanted a Case #. No one gave me one, had to call back and get one, they had me talk with a technician. Support person wanted me to go through the same process that I had gone through the night before.
    Explained that went though it already, they had to talk with a supervisor.
    After several minutes came back and gave me a case #.
    Back to the online RMA request - case # was not valid.
    Called customer service back again, after another discussion, was given a new case #. This person did stay online and waited as I went through each step in the online RMA process.
    SO long story... unit shipped back to linksys, replacement being shipped to me.
    (Mod note: Edited for guideline compliance. Thank you for your understanding.)
    Message Edited by giantherockstar on 08-26-2008 10:30 AM

  • SG200-08 all LED blink together.

    Hello,
    I have a SG200-08 which all LEDs blink together. This happened after a firmware upgrade.
    I can not access my switch.
    does anyone know a solution for this?
    thanks.

    Hi
    I think the following link will be helpful to upgrade and after upgrading the firmware, reboot the switch to factory default settings. I tried and I was successful, so I though it would be helpful to you.
    The following link will be useful while upgrading :
    http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=4&app=search&vw=1&articleid=947
    Thanks & Regards
    Punith Kumar Neelam
    SBCD Engineer

  • When i pug my iphone into my computer to charge it the apple shows up and just keep blinking. Does anyone know how to fix it?

    When i pug my iphone into my computer to charge it the apple shows up and just keep blinking. Does anyone know how to fix it?

    Hello Lorraine,
    Thank you for contacting Apple Support Communities. You might try the steps in the following article regarding iPhone battery charging:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Specifically:
    Resolving issues
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    Regards,
    Jeff D.

  • Cisco 1131AG LWAP status led yellow and other leds blinking green

    I have a problem with three AIR-LAP1131AG-E-K9  that joined the controller and the status led turns to yellow after joining the controller while other LEDs are blinking green.
    The APs has no coverage at all although the WCS shows that there is coverage and the 4400WLC shows that the AP interfaces are UP. (The ethernet interface and tha 802.11b,g radio interface is up).
    The SSID broadcast is enabled.
    On the switch the interface is up and there is traffic going in and out of the LAP.
    I tired power reset and factory reset for the APs but the problem remains the same.
    Any ideas for what might be the problem ?!!
    Regards

    Yes the clients are not able to see the SSID broadcasted by the AP.
    But these APs were functioning normally before without any changes to the WLC config.
    I had the same problem with other APs but they went back to normal state after a hardware reset to the APs.

  • BlackBerry Z10 won't turn on and red led blinks 4 times

    Hi all,
    Yesterday my BlackBerry Z10 suddently turned off, I turned it on again and it worked fine for a few minutes (battery was around 90% full), then it turned off again and I couldn't turn it on anymore! The red led is blinking 4 times with a 3 seconds interval between each 4 blinks sequence. I tried to charge the battery, connect it to the computer, turn it on without the battery (with charger on), with no success. Sometimes, it shows the BlackBerry logo, or even the logo with the % loading, but then it turns off in the middle of the process, on random percentages.
    Does anyone know what happened to the phone and how to solve this issue?
    Thanks!
    V

    Mine keeps turning off... I called them and they told me to send the phone to Blackberry by mail to check what's wrong and that when the phone gets there, they do a complete evaluation and in 30 days they send the phone back... In other words, I have to buy another phone! Blackberry assistance is useless...

  • How can I get Expose to show only and all active windows, regardless of app

    Sometimes I have two applications running with several finder windows hidden on the dock. I'd like to know how I can (or if I can) get Expose to show only the Active windows - not the ones on the dock. With this new upgrade, it seems that all open windows that are on the dock appear in a row at the bottom of the screen, which takes up real estate - can I turn that function off so just the open, undocked windows of all apps show?

    Sounds like you opened a message in a new window. Have you tried closing that window and see what happens?
    If that is not it maybe you can post a screen shot of what you are seeing.

  • Source of  form shows servername and all details

    Dear all,
    When we click
    http://tppl.com/forms/frmservlet?config=newconf and new form is opened as per the config in formsweb.cfg file but once the window is opened we can see the entire html code (by clicking view source) ,,
    Diff security parmeters shown are form module name ,App server name
    which we do not want to show as audit issue.

    You can hide details from the server, by setting the ServerTokens directive in your apache configuration to "prod". Next you could do some magic with the directive "alias", "directory" and "option" to do some more obfuscation.
    Hiding the HTML is not possible, since your browser doens't know what to do when there is not HTML (and don't even start thinking about javascript to hide stuff).

  • How do I determine what is my CURRENT Profile, because Profile manager shows 3 and all the Q&As are ambiguous in that respect. Thx.?

    Yes, I see ambiguity. I also have some old backed up profiles and I have 3 profiles showing under the Profile Manager. The folder under "%APPDATA%\Mozilla\Firefox\Profiles\ " shows 2 of them, but HOW do I determine WHICH ONE is my current profile?? So far I was unable to browse up a clear answer. Thx.

    Somehow the newest Profile ''(Profile 2)'' ended up in the \Profiles\ folder instead of in it's own Profile folder which would have a name similar to the other two Profiles - 8 alpha / numeric string ''followed by'' a suffix, ''either Firefox assigned or user specified, like JP1''. <br />'''Default=1''' indicates the "active" Profile so we know that is the most current Profile.
    <pre><nowiki>[Profile2]
    Name=JP1
    IsRelative=1
    Path=Profiles
    Default=1 </nowiki></pre>
    ''Sorry, I need to break now for dinner right now, be back in 1/2 hour or so.''

  • Green and Orange LEDs blink after each other - what does this mean?

    It won't show up in iTunes, it won't show up in Windows Explorer, and it won't show up in My Computer. Everything else is fine, but it keeps saying "USB Device Not Recognized."
    What should I do?

    If it helps, when I plug the shuffle into the PC, a balloon appears that reads, "USB Device Not Recognized."

  • Dual 1.8 G5 won't boot, first aid on disk utility failed, and the led blinks three times. I've tried the hairdryer trick but it only works for a short time. Any ideas if I can save it?

    I'm starting to feel like there is no hope for my G5. I've updated the os, backed everything up, used the hair dryer and switched out the ram. Still no improvements. I'm just wondering now whether it could be the disk or the logic board.

    I guess if it were me I'd try hotter/longer, then never allow it to Sleep except for the Monitor, & set Processor to Highest Energy Saver>Options tab.
    If you still want a G5, they've been getting cheaper on eBay & such, here's a 1.8 with bad PSU FOR $85+...
    http://www.ebay.com/itm/Apple-PowerMac-G5-1-8-GHz-DP-Dual-Processor-Bad-PS-/1107 15492187#ht_794wt_1398
    But the 2.3s were the most reliable G5s overall...
    http://www.ebay.com/itm/APPLE-POWERMAC-G5-2-3GHZ-DUAL-CORE-8GB-MEM-500GB-SATA-/3 80363233623
    An hour left on this one...
    http://www.ebay.com/itm/Apple-PowerMac-G5-Dual-Core-2-3Ghz-2GB-250GB-Super-Leopa rd-A1177-/160680216830?_trksid=p4340.m185&_trkparms=algo%3DSIC.NPJS%26its%3DI%26 itu%3DUA%26otn%3D5%26pmod%3D380363233623%26ps%3D63%26clkid%3D4264672915595326464 #ht_6431wt_1165

  • When I log onto my macbook, my user account isn't showing up. All that shows up is a gray screen with only two boxes saying "Name" and "Password". How do I fix this?

    There was one time where my wi-fi wasn't connecting so I tried to turn it back on. A window popped up but I had alrdy clicked enter before I read it, but it said something like "...will change settings, is that okay...?" And then wi-fi still would not connect. So I tried restarting my computer, but when it turned on, my user account did not show up and all there was on the screen was two boxes that asked for name and password. I was the only person using my macbook so I never set up a password for it. Has anyone had this problem? How do I fix this?

    Since I'm not in front of your computer I can't tell what you see - I can only guess and give a hint. So once again, if the disk name on your Mac is "Macintosh HD", when you boot in Recovery Mode, and start up the Terminal in "Utilities" menu, and then type in the command:
        df -k
    you should see a list of "volumes" - one of which is named "/Volumes/Macintosh HD" (but yours could be anything) and in that folder there is another folder called "Users" and in that folder is the names of the home directories of the user accounts (and the names that you can enter into the login screen) that you are looking for. So if you are not familiar with using the Terminal you should say so and I can give more details. But assuming you're OK with typing in commands to theTerminal this is what I would try:
        ls -l /Volumes/Macintosh HD/Users
    and you should see something like the following (my disk name is "Yosemite" so I typed "ls -l /Volumes/Yosemite/Users")
    ML9Book:~ xxxx$ ls -l /Volumes/Yosemite/Users
    total 0
    drwxr-xr-x+  11 Guest      _guest   374 Oct 25 19:23 Guest
    drwxr-xr-x+  33 Jack       staff   1122 Oct 24 10:49 Jack
    drwxrwxrwt   13 root       wheel    442 Dec 27  2013 Shared
    drwxr-xr-x+  38 admin      staff   1292 Oct 25 16:59 admin
    drwxr-xr-x+  15 x13        staff    510 Oct 23 22:41 x13
    drwxr-xr-x+  12 514        staff    408 Oct 23 12:24 x14
    So now reboot your mac into normal mode - and you will see the login screen with the two empty boxes.
    So the above output tells me that there are 3 users - Jack, x13 and x14 (there is always a Shared user and there might or might not be a Guest user since it depends on how your setup was setup) - and these 3 are the names that I could try and enter into the login screen (in the top or first box). You can try no password, but I don't think you can create accounts without passwords, so this will likely fail. In that case you need to reboot in recovery mode and run the Terminal command again (from the Utilities menu) and do a resetpassword command. Another window will pop up and from there you select the Volume (in my case I selected the Yosemite volume - in your case you would select the "Macintosh HD" if that is what your volume name is). Then select the user account you want to reset the password from the drop-down list of user accounts (it will show you the long and short names, and the short name is what was in the listing above from the "ls -l" command), then enter the new password in the indicated box, and then enter it again in the next box, to make sure you didn't make a typo, and enter a password hint in the last box (optional). Then click the "Save" button and you will see another dialog box pop up telling you that the password was changed but not the Keychain password (hopefully you remember this one) - click the OK button then reboot back in normal mode (click on the Apple logo in the top left corner of the screen and click on Restart).
    Does this help?

  • I have pc with itunes loaded on seperate hard drive and can't find all music some from ripping in wav files won;t show but any and all i've downloaded from itunes store are there what,s up/ /?

    Having trouble getting my music from seperate hard drive. Recently tried to have my new laptop see and play itunes on my wireless server, but not all music showed up, and now my music on my pc doesn't show all music either. Some wav files from ripping off cd, and some I've imported from windows media show up and all mp3 bought from store is there. But more than half is listed at bottom of library as unknown artist, unknown album etc.. WHATS UP!!!!

    try backing up the adresses on a different computer.
    1) connect iphone to computer
    2) in itunes click "enable disk use"
    3) locate the files in the iphone hard drive
    4) copy and paste them on that computer
    if it does wipe out your adress library, just revert to the backup. Although i don't know where the files will be on your iphone hard drive.

  • Pearl Flip wont load - Red LED blinks twice, nothing on screen

    My Pearl Flip refuses to load, and the only activity it shows is the red LED blinking twice every few seconds. I have tried the following
    -tried reinstalling the two most recent versions of the OS using the Blackberry Desktop Software, but the installation hangs at the point of loading the system software
    -tried using the application loader, however the installation hangs at loading the system software
    -tried to use JL_Cmdr to wipe the device. As far as I can tell it did not wipe it (although it doesn't really provide any errors either)
    EDIT: Should also say Ive tried all the above from multiple computers and using Win7 and XP
    What other methods can I try to restore this device? I appreciate any suggestions that might be out there.
    Thanks!
    Scribs

    Hey Scribs,
    Welcome to the forums!
    Have a look at this article for help reloading the software using loader.exe http://bbry.lv/9fsGPK If this method does not work you can try doing a reset to factory using the switch found in this article http://bbry.lv/dpNb1j
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Maybe you are looking for