PSC 1410 won't print

The printer sounds like it works...the page go through but come out blank. I get no error messages.
I have tried to print from a PDF, a web page and word and all pages come out blank. The cartridges seem in place and with ink.
Any advice to get it to print?
Thanks!

Won't print from my e-mail.

Similar Messages

PSC 1410 - can I print just black and have empty color cartridge

Do I need to have a full color cartridge in to be able to print black only. I have no need to print color and wondered since now my color cartridge is empty, do I still have to buy another one?

Yes you will still need the color cartridge. The printer uses what is called under printing, it still uses some of the color cartridge's ink in this process, even when printing in just black, the reason is to stop the black from "bleeding"
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Psc 1600 won't print color. Do not get any error msgs.

Cartridge is new. Windows 7. Test Page no color. Have cleaned printer cartridges. Need help. Thanks!

q67and68,
This article covers the missing colors you are seeing. Give the steps as shot and let me know the results:
http://goo.gl/J1Zwf
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

PSC 500 won't print yellow (a few specific questions)

I have tried installing a brand new cartridge, cleaning the connections, etc. The most common suggestion I've found is that I have two bad or "old" cartridges (manufactured in Puerto Rico, April 2007). Before I go buy another costly cartridge, I have a few questions:
1) I colored an entire sheet of paper yellow in Word, then printed it. The printer just spat it out without even pretending to print anything on it. Does this in itself suggest either a printer or cartridge problem?
2) I recently installed a new black cartridge (a remanufactured or refilled one from simplyink.com--yes, I know that's not recommended), and I'm sure I haven't tried to print anything in color since then (until today). Could an issue with the black cartridge possibly affect the color cartridge?
3) Regrettably, I can't say for CERTAIN that I've printed in color with the current cartridge; I can't remember when I installed it, but I'm ALMOST sure that I have. This is another reason that I suspect something internal happened and it's not just the cartridge. I hope I'm wrong, or that there's a fix that doesn't involve taking the old beast into a repair shop.
Any input would be greatly appreciated. Thank you!

Okay, trying to figure out why no one will even look at this...I read the first sticky, so in case this helps in the etiquette department: I have searched, and haven't found answers to these specific questions. My operating system is Vista, and my printer is connected via serial port. I think I have done everything that's suggested. Please, can anyone give me a hand here?

HP PSC 1410 not printing with Airport Express

I have just purchased this printer. I'm running Tiger on a Powerbook G4.
When I set up the printer with a direct USB connection to my computer, the printer is added with the driver "HP All-in-One 3.0.1" automatically chosen. It works just fine.
When I plug in the printer to my Airport Express, the same All-in-One driver is automatically offered. I chose it, and the printer is added to my list of printers no problem. However, it just won't print. It tries to start the print job, and then the printer icon bounces in the dock with a big red exclamation mark. I try to click on start print job, and the same thing happens - it tries to start the job, but then just stops and the exclamation mark appears.
Does anyone know what might be wrong?
Thanks
Theresa

The PSC 1410 is not on the list of known compatible printers found at http://www.efelix.co.uk/tech/1013.html - which may very well explain the problem.

Airport Express with HP PSC 1410 printer

I have an airport/airtunes express and have an HP PSC 1410 all in one printer. I can't get it to work as my "network printer" I was surfing the Apple website looking at FAQs and it directed me to the HP site. There are a list of known printers that were compatible with airport express. Mine didn't show up....BUT, the information was very vague. Does anyone know if this will work, or is the "all in one" messing things up? I assume you can't scan and receive data via 802.11b from the Airport Ex.
Thoughts?

When connected via an Airport Express or Base Station, basically all you can do with a printer is "print". It is *not possible* for any make/model of printer to do any of the following:
1. scan or fax on with a multifunction printer
2. check ink levels, or any other printer status
3. clean print heads
4. use any printer utility software provided by the printer manufacturer
Paper choices are usually a function of the printer driver, and are therefore always available. Some photo printers won't allow options like borderless printing to work - but issues like this seem only to be known through discussion forums like this since they are rarely publically documented by the printer manufacturers.

Can't print from iBook G4 via Windows XP to an HP PSC 1410

Hello,
I realize this question is very similar to others on this discussion but I haven't been able to find an answer to my problem.
I cannot print from my iBook via XP to an HP PSC 1410.
I can print from my iBook via XP to an HP LaserJet 4L.
I was able to print from my iBook via XP to an HP882C that was connected
to the same USB port that the HP PSC 1410 is connected to now.
I have an iBook G4 running 10.4.3
I have a PC running XP with an HP LaserJet 4L on a parallel port and an HP PSC 1410 on a USB port.
I installed the following from http://www.linuxprinting.org/macosx/hpijs/
hpijs-foomatic-2.02.ppc.dmg
espgs-7.07.1.ppc.dmg
HP-PSC_1400-hpijs.ppd
I think I correctly followed the instructions at:
http://www.ifelix.co.uk/tech/3015.html
They worked for the LaserJet printer.
When I attempt to print from the iBook to the 1410 the HP doesn't print at all.
I don't see any error messages on the iBook. The document gets spooled onto the Windows print spooler, the printer even starts making noises, the print heads move about a bit and then stop. The print job just sits there in the queue with a status of "Printing". The print job is then stuck and hard to delete.
I don't need to be able to scan or check ink levels from the iBook.
I would just like to be able to do color printing.
What else should I try? Given the symptoms where might I be going wrong?
Any suggestions would be appreciated.
iBook G4 Mac OS X (10.4.3) 1 Gig RAM

I found the answer to this problem on Linux printing provided by Steve Stuart.
Dave
Steve Stuart wrote at: http://www.linuxprinting.org/forums.cgigroup=linuxprinting.macosx.general;articl e=1446
Hi all,
I finally figured out what the issue was, Why it fixes it I can not say,
but it does.
On the Shared printer on the Windows side, go to the properties of the Printer.
Go to the Ports tab, and deselect the "Enable bidirectional Support" (do not
have it checked). Once this is done and you also do not have any firewalls
setup on the Windows machine (Windows, MCAfee, Norton, ....). You should be
able to print.
Finally!!!!! I hope this helps many many people. As I have had many
people asking for the solution if I found it.
Thanks,
Steven Stuart

Re: how do i install a hp psc 1410 all in one printer without the disk?

how to install?

lection wrote:
how to install?
Install what? If it is the PSC 1410 then what operating system? Do you have a 32 bit or 64 bit version? See my post here.
If a different printer model please start a new thread after reading this post and then provide some details. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP PSC 1410 All-In-One printer problem!

I have a PSC 1410 for a while now and I reinstalled Windows 7 recently and now the printer's not detected but I can scan documents. What could be the problem? It was working fine before I reinstalled Windows 7 and I've obviously installed the drivers.

Click here for troubleshooting tips for blinking lights on the PSC 1400 series printers.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Psc 1410 all in one series Printing pink

Printer - HP Psc 1410 all in one series
Operating system - Microsoft windows Vista 32 bit
Ive installed the driver and the software but when i print colour the colour is pink. When I print in black and white it prints fine jsut colour is all pink.
Jamie

Please click here for a possible solution to your problem:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&product=441115&docname=c00313147
Let me know if that helps.
Please click on KUDOS if you find my solution helpful.

HP PSC 1410 All in one Printer not installed

In windows 8 after complete and lastest installation of Driver of HP PSC 1410v All in one, in the Control Pannel, Device and Printer Tab only scanner icon is showing no any printer icon and no other HP Icon, so i can use scanner only of this model but not printer. After reading suggestions I install the windows 7 driver in windows 8 after solution of fatel error here is also only scanner is showing no facility for printing, please help me where I am wrong or whats solution fast plzzzzzz.

Hello Jai_pareek,
Welcome to the HP Support Forums! I see you would like to install your HP PSC 1410 to your computer running the Windows 8 Operating system. You tried downloading the Windows 7 driver but are now getting a fatal error. Please go ahead and start with the steps listed below:
1. Unplug the USB if using a direct connection.
2. Remove the HP PSC 1410 software from your computers Control Panel's Uninstall a program option.
3. Restart the computer.
4. Make sure ALL the PSC 1410 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
5. Now go ahead and download the software and drivers for your PSC 1410 (DO NOT plug in USB until the software prompts you to):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-110055-2&cc=us&dlc=en&lc=en...
6. Go ahead and print a test page.
7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

PSC 1410 printer all in one

I have a Hp PSC 1410 all in one printer wired to my desktop. How can I use it with my wireless laptop. Its on there but when i click it is is offline and I cant change it to online. Can use it fine on the desk top but I had anew hard drive pit in my desktop last week and since then something has changed that I cant get my printer to be online. on my laptop. Hp helped me set it up on my laptop when I got the laptop but now they wont help me as they say this printer has no support. I dont believe that. Wanted to sell me a new printer which i refused as this printer works fine.
Anybody know an answer to this problem?

Do you have the printer wirelessly connected to your network or ethernet connected to a router?
If so, then you should be able to print from the wireless notebook.
If you just replaced the harddrive, then it may be necessary for you to perform a new install of this printer. I would uninstall the old software and re-install with the most up-to-date drivers available here.
Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

HP PSC 1410 PRINTER

I AM INSTALLED HP PSC 1410 ALL IN ONE SOFTWARE (AROUND 382 MB) BY DOWN LOADING FROM HP SITE. BUT I CAN'T TAKE PRINT. PRINTER DRIVER NOT INSTALLING.!! I CAN SCAN AND COPY. FROM THE SYSTEM
oPERATING SYSTEM : WINDOWS 7 PROFESSIONAL
PRODUCT NO " HP PSC 1410 PRINTER

Hi,
Please provide more clarity on this issue like what happens when you try to print, is there any error message? Is printer icon present under Devices and Printer.
Also you can try using Print Diagnostic Utility from the following link.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02072599&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Thanks,
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

PSC 1410 - print job stuck in queue

Sometimes my PSC 1410 stops printing part-way through a page: the warning lights "jam" and "cartridge" come on, although the paper path clears after pressing On/Resume when the spoiled sheet emerges (undamaged), and the cartridges are at about half life and have been aligned. Apart from the waste of paper and ink, the great problem is that the stuck job remains in the queue and does not respond to Cancel or Delete: even switching printer and computer off and on still leaves the job stuck in the queue sometimes, when it has been known to restart printing automatically.
Can anybody tell me a sure-fire method of clearing the stuck job out of the queue ?

Try this document for the partial page problem:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00447737&cc=us&lc=en&dlc=en&product=441115
Here is a document referencing the various error light combinations as well:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00476152&tmp_task=solveCategory&lc=en&dlc=en&cc...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

HP PSC 1410 printing blank pages

I have recently installed windows 7 (32 bit) on my Asus G50 laptop. First thing i did was installing all the latest drivers from the HP website including the HP solution centre and other software. Now here's my problem:
Whenever i try to print anything through 3rd party software (i.e. browsers, Word, Notepad etc.) my PSC 1410 'prints' blank pages. The reason i say print is because i can hear the printerhead moving as if it was really printing and the paper gets pulled through in short steps like it normally would. There is however no ink on the pages.
Now here's the weird thing. When i check my ink levels in the solution centre, both color and black are over 75%. It get's even better now: When i use solution centre to print a test page or clean out the inkcartridges it works fine! It seems like all programs outside of HP software have problems communicating somehow.
i'm pretty sure i have the latest drivers installed (downloaded them 3 days ago). I'm running the 32bit version of Windows 7, kept nicely up to date, on an Asus G50v notebook. some technical specs for the lovers:
Intel Core 2 Duo T9400 (2.53 GHz)
Nvidia GeForce 9700M GT
4GB DDR3 RAM

Hello MPQCNC,
I seen your post on having issues with your Photosmart C7280 printing blank pages. I would like to help you.
I have located a troubleshooting document that I recommend you follow to help resolve the problem.
Troubleshooting Print Quality Issues
I hope this helps you, if you have any other questions please feel free to respond.
Take care,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

PSC 1410 won't print

Similar Messages

Maybe you are looking for