Psc 2175 printer error msg for SD memory card

I inserted a micro SD card from my cell phone using an SD adapter in the SD slot of my 2175 all-in-one. The printer reads the card and comes back with an error msg. Computer runs XP.
Latest printer driver was installed. Put a std. SD card in and it works fine. Brought the micro SD in the adapter to store and put it into a new printer. It worked fine.
I heard HP 2175 has a problem reading certain cell phone microSD cards and developed a fix for this problem. Unable to find it.The Motorola Z6c cell phone supports JPEG as does the HP printer. HELP!

Ok, I tried to reformat it, on my Mac but when I do I get a Input/Output error. So I tried to reformat in my PC, when I try to there is a pop up saying "Please enter a disk into Drive F." So after all of that I put it into my phone and reformatted it on that. Now when I plug it into my Mac i am getting this: http://img512.imageshack.us/img512/8094/picture5qh9.png
I have no idea what to do now.

Similar Messages

  • How can I print web pages with HP psc 2175 printer?

    Hi,
    I'm having difficulty printing web pages with my HP psc 2175 printer. The printer spits out many pages before the actual page I want printed and then at times it doesn't print all of the section desired.
    In fact, when I copied one page the other day, saved it as a pdf file to my computer, opened the file and the document still would not print.
    Anyone have any idea what could be happening?
    Lee

    I have a strange issue - I am also using HP Envy 100 410A and its prints fine from iPad2. But when I try to print from my Gen 1 iPad, it goes thru the motions (shows the printer, allows to select which pages to print, double sided print etc.) but the printing actually doesn't hapen.
    Any suggestions?
    Thanks

  • Windows Printing w/ HP PSC 2175, prints, but settings are weird?

    I have an hp psc 2175 printer connected to a PC computer running on XP on my wireless/wired network. (I have a linksys wireless-g router; i connect wirelessly, and the PC is hooked in through one of the four ports on the back WRT54G). I am trying to set up windows printing so that I can print wirelessly through it. I have already set it up without any problems on three other PC laptops and they all print fine. I had initially had some problems with my mac, but then I downloaded the hpijs and ESP ghostscript from http://www.linuxprinting.org/macosx/hpijs/ , however, now that it does print, it is as if it is using three times the ink on each page!! Every page that prints from my computer is as if the words are allin bold. This does not happen from any of the PC laptops, just from my Powerbook. Is there anyway I can change the settings on the remote printer, or what should I do??
    Thank You

    I have an hp psc 2175 printer connected to a PC
    computer running on XP on my wireless/wired network.
    oh-oh. Danger, Will Robinson! Danger!
    (I have a linksys wireless-g router; i connect
    wirelessly, and the PC is hooked in through one of
    the four ports on the back WRT54G). I am trying to
    set up windows printing so that I can print
    wirelessly through it. I have already set it up
    without any problems on three other PC laptops and
    they all print fine.
    This is because HP's Windows drivers support sharing over the network. (Most of them do, anyway. Some don't. But the printers which can't be shared over the network usually have some kind of a warning in the fine print on the box or on the online blurb.)
    I had initially had some
    problems with my mac,
    This is because HP's Mac drivers do NOT support sharing over the network. (There are exceptions, but most HP inkjets don't do OS X sharing out of the box.) Note that HP does not warn Mac users about this.
    but then I downloaded the
    hpijs and ESP ghostscript from
    http://www.linuxprinting.org/macosx/hpijs/ ,
    however, now that it does print, it is as if it is
    using three times the ink on each page!!
    That's strange. It's not supposed to do that. There's something set funny in the printer setup.
    Every page
    that prints from my computer is as if the words are
    allin bold. This does not happen from
    any of the PC laptops, just from my Powerbook. Is
    there anyway I can change the settings on the remote
    printer, or what should I do??
    The HPIJS drivers use CUPS and GhostScript. That means that you can play with the settings (IF you know what you're doing!) from the CUPS printer page on your Mac. (Open a web browser, type in http://127.0.0.1:631/.) This site may be of some assistence. <http://www.cups.org/> This PDF file may also help. <http://www.oreilly.com/catalog/lunixpanther/chapter/ch05.pdf>
    And then there's this: <http://www.mandrake.demon.co.uk/Apple/osxprint.html>
    Note that you'll have to be handy with the command line to use either of the last two.

  • Hide the error msg for the mandatory fields

    hi
    how can i hide the error msg for the mandatory fields when they are not entered?? when i don't put a value in a mandatory field and commit the form, an error msg occurs teelling to enter the value for that mandatory field, but the error msg is not friendly at all and i want to hide it.
    thnaks

    User,
    I'll assume you are talking about ADF Faces + ADF Business Components application, since you don't mention it.
    If you are talking about the pop-up Javascript dialog box that pops up, you can do the following:
    1). Set required=false on those fields in your JSP.
    2). Set showrequired=true on those same fields so that there is a visual indication that the fields are required
    3). Ensure the attribute to which the fields are bound have "mandatory" set to true in the BC's
    Now, when you commit the form, you will not see the Javascript pop-up, but you will see a message in the af:messages component.
    Best,
    john

  • Looking for internal memory card ready

    Looking for internal memory card ready for dual 450mhz g4 (gigabit)
    Want to put it in the 3.5" slot the ZIP® drive was in.
    Anybody know of any good/compatable ones?
    thanks

    I have never seen an internal media card reader designed to fit in a Mac. Most are designed for the PC to fit in a 5.25" optical drive bay. If you could somehow modify one of those units to fit in your machine, you would still need a USB card with an internal connection to service the card reader.
    -Douggo

  • My HP PSC 2175 printer spits out blank paper while I try to print.

    I have Windows XP service pack 3. My printer(HP PSC 2175 All-in-one) use to work well until few days before. I leave the printer unused for few days and now when I came back to use it , it simply picks up paper scans( a ledger like light runs to and fro at the top end of paper) and spits the paper out.This  only happens when I try to print. I can still make black copies well from the same machine. I only have Note pad and Word Pad. It does the same with both. I tried with pdf document too. It still persists its problem. But if I open the Hp service tool box through printing preference and print the test page it prints.
    I have tried every thing that I can do. I've repalced the new cartiage, uninstalled the existing driver softer and installed new from hp website. Updated them and what not.
    Can you tell me what is wrong with my printer? pls.

    Hi,
    It looks like you've tried some of the troubleshooting steps listed in this document, but there are a few more to try first.  Click on the + besides the XP section and follow the steps in order.  See if this helps, if it doesn't I'll look for some more.
    Printer Prints Blank Sheets
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • 1102w gives print error msg, but prints

    I had an hp p1102w for quite some time and it perfectly fits our needs on our home wifi network.  One of the features I use on a regular basis is printing double sided.  About two months ago I started to get an error message "HP P1102 could not print (document name)", but the document printed just fine.  I didn't really worry about it until I tried to print double sided.  Now the printer prints the even numbered sides, but I never get message to turn the paper and press continue.  The printer and computer just sit there looking at each other and nothing happens.  If I press the 'X' button the error message immediately pops up on the computer and the rest of the job is lost on the printer.  I downloaded and installed the HP drivers, the HP printer doctor software, searched the forum for suggestions, tried a few suggestions that sounded vaguely like my problem, turned the firewall off and back on, and finally concluded that the printer was bad.  So I bought another one.  I get the same problem, tried the same remedies, and still am getting the error msg.
    My conclusion is that there is a communication problem between the two devices that has probably been caused by some windows update at some point.  Anybody got any bright ideas?
    Peace,
    V
    This question was solved.
    View Solution.

    Hi vneathery ,
    Thanks for letting me know you were able to print two-sided by opening and closing the lid. But still the issue exists.
    Most likely to resolve this issue, we would have to rip everything out for the printer in the registry and do a fresh install to fix this problem.
    I can send you that information in a private message and you can decide whether to continue with more steps.
    In the forum beside your handle name just click on the envelope to view it.
    You can always restore your computer back to a earlier time when everything was working properly, but you mentioned this issue started 2 months ago. How to refresh, reset, or restore your PC on Windows 8.
    How is the printer connected?
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Samsung laser printer error msg on Mac Mini since update

    samsung ml-2955DW laser printer throws error msg - rasterosec, filter - since recent update to OSX 10.8.3, but *only* when printing in Word for Mac. have deleted printer and reinstalled twice. no luck.
    any ideas?

    candace200 wrote:
    samsung ml-2955DW laser printer throws error msg - rasterosec, filter - since recent update to OSX 10.8.3, but *only* when printing in Word for Mac. have deleted printer and reinstalled twice. no luck.
    any ideas?
    Microsoft for Mac Support

  • Opening attachments - ERROR MSG - 'Not enough memory or disc space'

    Hi
    I'm trying to open a word .doc from my Entourage email account and it comes up with the error message ' Not enough memory or disc space'. My hard drive has 119 GB free - so I'm thinking it may be a memory issue.
    How do I deal with this/clean up my computer??
    I just turned my computer on for the day and got this message. The only programs I've got running is Safari, entourage, word and adobe reader.
    Thanks.
    Margie

    Have you tried Epson support for that E-Web Print application?
    Also, I am curious if Epson installed an add-on for Firefox for that E-Web Print application? ''Thus prompting you to ask about it in the Firefox support forum.''
    At this point the best I can offer you is a suggestion to reset your printer prefs in Firefox to see if that will help with that issue.
    https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox#w_reset-all-firefox-printer-settings

  • Hp psc 2179 Printer error

    hp psc 2179 Printer will not print, it shows Press enter to align print cartridges but won't complete this task therefore it won't do anything else either. I have tried to reset but the problem remains.
    Any help appreciated before I go and buy a new one!

    Hello @viola27 , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you're running into printer errors.  I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • "Unable to Access" error msg for BI Publisher Report

    Hello All,
    I am getting the following error when trying to access a BI Publisher report from the dashbaord. We can access the folders that come with BI Publisher examples, ie Executives, Financials, HR Manager but not the "GTR" that we have created.
    Privelleges are the same. The folders have the same rights too.
    This is for OBIEE 10.1.3.4 with BI Publisher of the same version, running on a solaris box.
    Any thoughts.
    AxisFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
    faultSubcode:
    faultString: Unable to access/Report not found: /GTR/Testing/QTD/QTD.xdo
    faultActor:
    faultNode:
    faultDetail:
         {}oracle.apps.xdo.service.server.XMLPServiceException:null
         {http://xml.apache.org/axis/}exceptionName:oracle.apps.xdo.service.server.XMLPServiceException
         {http://xml.apache.org/axis/}hostname:jrc1vmsuapptst03
    Unable to access/Report not found: /Grand Total Reports/Combined PNL/QTD/QTD.xdo
         at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221)
         at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128)
         at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
         at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
         at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
         at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
         at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
         at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
         at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
         at org.apache.axis.Message.getSOAPEnvelope(Message.java:424)
         at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
         at org.apache.axis.client.Call.invoke(Call.java:2748)
         at org.apache.axis.client.Call.invoke(Call.java:2424)
         at org.apache.axis.client.Call.invoke(Call.java:2347)
         at org.apache.axis.client.Call.invoke(Call.java:1804)
         at com.oracle.xmlns.oxp.service.report.xmlp.XMLPServiceSoapBindingStub.getReportMetadata(XMLPServiceSoapBindingStub.java:633)
         at com.siebel.analytics.web.sawreporting.XmlPublisherRpcGetReportMetadata.processMessageInternal(XmlPublisherRpcGetReportMetadata.java:91)
         at com.siebel.analytics.javahost.AbstractRpcCall.processMessage(AbstractRpcCall.java:107)
         at com.siebel.analytics.javahost.MessageProcessorImpl.processMessage(MessageProcessorImpl.java:175)
         at com.siebel.analytics.javahost.Listener$Job.run(Listener.java:223)
         at com.siebel.analytics.javahost.standalone.SAJobManagerImpl.threadMain(SAJobManagerImpl.java:205)
         at com.siebel.analytics.javahost.standalone.SAJobManagerImpl$1.run(SAJobManagerImpl.java:153)
         at java.lang.Thread.run(Thread.java:595)

    more info...
    when i create a new folder in Publisher, I also get the same error msg.

  • "Unknown Error" msg. for Officejet J3640

    My printer, about 6 months old, has always been unreliable.  It refuses to print and it refuses to give me an error number or title.  I have searched all the posts here in the forum, I have run a test page (all okay), printed a document from Word 2007 (sometimes okay), but it won't print my online bank statement.  The printer has an LED but there is not a message there.  My OS is XP, 3rd SP, and my computer is a Dell Optiples GX270.  Help!

    more info...
    when i create a new folder in Publisher, I also get the same error msg.

  • HP 8500 All in one printer, Error msg to change yellow/black cartridge

    Cartridge was changed but same error msg occurs.
    SN {Removed for privacy}  DATE:  12-5-08.  What can I check now that there is new ink cartridge properly installed.  We have turned off, left it set and triedturning on again.

    Hi,
    As it is refurring to a yellow/black part its most likely the printhead that needs to be replaced and not the cartridge.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • SBL-DAT-00398 error msg for User Field Validation

    Hi All,
    I have created the following field validation on the User field "Division": Len([<Division>])>0 AND InStr([<ltValidation_OU_ITAG>],[<Division>])>0, As the "Division" field is free text, the porpuse of the validation is to prevent the user from entering in this field any value that is diffrent from the ones available in the custom field "Validation OU" via the User Owner Page Layout. The validation works OK for Admin Role via the User Admin Page Layout but a SBL-DAT-00398 error msg stating " Field '<Division>' does not exist in definition for business component 'Occam Current Employee' " appears when users with other roles are trying to update this field via the User Owner Page Layout.
    I have contacted OD Customer support and they validated this in several POD saying this "is most likely a defect in the application" and a CR will be submitted to dev team to fix it sometime in the future.
    I am wondering though if support isn't making life easy here stating the above...:
    1. Anyone encountered this error before? (couldn't find any trace for this on My Oracle Support)
    2. Anyone aware of field validation limitations for the 'User' entity?
    3. Workaround suggestions are welcomed
    10X for you help!
    Alex.

    Error(), fatal(), info() and warn() issue FacesMessages that get picked up by the MessageGroup component.
    By adding in the uicomponent you can target the facesMessage so that it gets picked up by the Message component associated with the field causing the error.
    But, to get the label to show the error as well, you need to throw a validationError. See this tutorial for more informaiton:
    http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/customvalidator.html
    Lark

  • To have error msg for RG Part II posting

    Dear All gurus,
    presently in our system for invoice posting we have defined check for RG Part II posting as WARNING only. I want to hav it as ERROR msg. That is untill user has done Part II posting, system shud not save invoice. I checked system msgs in SPRO> MM>Log. Inv. Verification--> Def Attrbuted of System Msgs, but I cud not find that msg there. Can anyone guide me where can I change this msg to error msg.
    Warning Message is as follows
    RG23 Part II posting not yet done
    I checked in OBA5
         Message no. 8I478
    Thanks
    Edited by: sapsarang on Aug 7, 2009 2:02 PM

    HI,
    U can do it thru
    LG --> Tax on Goods Movement - India -- Tools -- Message Control .. here check 8I 478 is ava or not? if ava change the status into Error . if not ava, slect new entry and create for this msge nbr

Maybe you are looking for