Psc 2210 all-in-one.

I have an old workhorse, a psc 2210 all-in-one. Can I easily turn the color off and on? Anybody know?   Thanks.

Does the printhead take a swath and then delay 10-15 seconds before the next swath?  Does the delay also happen when you make a copy?  If so likely one of the cartridges has failed.  Try removing the color cartridge and printing (not copying) a page.  Does the page print at normal speed?  If so the color cartridge is at fault and should be replaced.  If not then remove the black cartridge, put the color cartridge back in and try printing a page.  If the printing now completes in approximately normal time then the black cartridge was at fault and should be replaced.  
If the failed cartridge is an original (not refilled or reman) HP and not empty you can check the warranty information as shown here.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • HP TouchSmart 600 and HP psc 2210 all-in-one printer

    Hi SiobhanF,
    I just registered and this is my first post.
    I recently bought a new PC...an HP TouchSmart 600.  My printer is a HP psc 2210 all-in-one.  I need advice on whether the two are compatible and if so how to get them working together.
    Thank you,
    waj

    This is likely caused by the failure of one of your cartridges.  Remove the black cartridge and print a test page.  Does the printer print at normal speed?  Is so the black cartridge was the issue and should be replaced.  If not then put the black cartridge back in and remove the color cartridge and print test page.  If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • After the latest update printing off the web has moved from readable to font size 6. How to I get back to font size 10 or 12? hp psc 2210 all-in-one?

    When I print coupons or e-mail from my hp psc 2210 all-in-one the font has changed to 6 where before it was size 10 or 12. I have made no changes in my printer settings nor any other changes that I am aware of. This happened after the latest update of Firefox.

    I have a carriage jam on my HP Officejet 5510 which I cannot correct.. I have tried everything I know to do. There are two black pieces that will not spring down when the cartridges travel across. I th en get a carriage jam message.
    Do these pieces need lubricated?
    How can I get t hem to go down when the carriage goes across?
    Thanks for any information or help options
    Karol

  • HP psc 2210 all in one printer hung up

    My HP PSC 2210 is stuck with an internal software hang up. It thinks it is printing a job, but there is no job, it also (correctly) wants to align the cartridges, but when I press enter to do this is says it is busy printing.
    (I have cleared any print jobs from the computer print queue).
    It will not copy or anything either , because it is trying to align the cartridges. any attempt to print test pages etc similarly fails, whether from the computer, or direct from the printer.
    I need to reset the internal memory of the HP PSC 2210 in some way.
    I have tried powering up with # and 6 held down, this effected some sort of reset, I had to choose the language again.... but I cannot get rid of the phantom print job.
    I cannot even switch the wretched thing off with the power button any more ?!
    any advice greatly appreciated

    This is likely caused by the failure of one of your cartridges.  Remove the black cartridge and print a test page.  Does the printer print at normal speed?  Is so the black cartridge was the issue and should be replaced.  If not then put the black cartridge back in and remove the color cartridge and print test page.  If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP PSC 2210 all in one printer - slow printing

    I have had this all in one printer for several years.  Just recently I attempted to print two pages from a PDF file and it took over 1 hour to print.  At first I thought it was the PDF but now I realize it is with anything I try to print.  I went through all the troubleshooting steps and none of them have fixed the problem.
    I have a Dell Dimension 8400 Intel Pentium Computer,  Windows XP 4 cpu 3.20 GHz, 3.19 GHz, 1.00 GB of Ram.
    It will begin to print but then it will take at least an hour to print 1 page.  I have already uninstalled, re-installed, etc...
    This question was solved.
    View Solution.

    This is likely caused by the failure of one of your cartridges.  Remove the black cartridge and print a test page.  Does the printer print at normal speed?  Is so the black cartridge was the issue and should be replaced.  If not then put the black cartridge back in and remove the color cartridge and print test page.  If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I have a HP PSC 2210 all-in-one. Can I print a status page that shows count of pages printed?

    I said everything in the subject except, if there is a status page printing capability how do I do it,

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How do I install driver for hp psc 2400 all in one series AND safe wsnmp32.dl​l Without a Disk?

    How do I install driver(s) for hp psc 2400 all in one series ( WIndows 7 laptop)   AND a safe version of wsnmp32.dll -- Without a Disk?    A tech took the driver off my laptop and I now have no printer/scanner.  Help!!
    Much thanks!

    Hello,
    I see that you're having an issue installing the software. I would suggest following this document, which will guide you through several steps on how to resolve the issue.

  • Can I share HP PSC 1610 All-In-One series printer through Bonjour?

    I have an iBook G4, and a Mac Mini (10.4.11- Tiger) with a HP PSC 1610 All In One series printer connected to it by USB. On my iBook G4, the printer comes up under Shared Printers in the Printer Setup Utility but when I click on it, and press Show Info it freezes.. so I was wondering, is there a way to connect to the printer wirelessly with the correct driver (because the driver doesn't show up in the driver list... and the driver is installed.)

    Hi my printer psc 1610 hp not picking paper

  • HP Officejet and PSC Full Feature Software for HP PSC 1210 All in one printer

    Hello ,
                 I have  HP PSC 1210 All in one printer but i am using windows 7 system.how can i find
                                                                                'HP Officejet and PSC Full Feature Software'
    compatible for windows 7, in hp.com i sould find the above software for windows xp but for windows xp its not working, my printer physical keys are not working so i need software to do everyything from print to scan, copy etc from my windows 7 laptop itself. pls help with sofware for windows 7

    Hi,
    There is not a full feature software Win 7 download available for the HP PSC 1210. The following document includes instructions on how to install the in-OS Win 7 driver with instructions on how to scan:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...=
    I work for HP.

  • How can I fix a check paper error on the HP psc 1210 all in one printer?

    Product name/number:  HP PSC 1210 all-in-one
    OS:  Windows 7
    Error Msg:  Check Paper light flashes
    I have verified there are no paper jams, paper is loaded, print cartridges move freely and rollers are clean.  Is there a a paper out switch that can fail?

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP PSC 2410 All-In-One - use in Windows 7 64-bit environment

    Hi,
    I have had this HP PSC 2410 All-In-One printer for some years now and it has worked pretty flawlessly in a Windows XP Pro SP3 environment for that time.
    Some months ago, I purchased a new computer system and went to the Windows 7 64-bit OS (not interersted in Windows 8 at all) and whilst I have installed the printer successfully and it works, the software suite that came with the printer on the CD will not install for this environment and therefore I no longer have access to the various Maintenance Options that were available under the Windows XP Pro OS, such as the cleaning and Fax options.
    Searching for something for the Windows 7 64-bit OS threw up two options - the driver update and the utilities tool wizard.   After going down the driver update route, no software suite was available and in fact the update stated that the driver was installed by Windows 7 automatically.  That seems to be the case as the printer works fine in print mode, scan mode (from the desktop menu) and it detects SD cards through the slots.
    However, there is no software to allow me to fax or clean or do any of the other options available under the HP Suite that came on the CD.
    Going down the Utility route got me downloading a file - HPPIW.EXE - that would look at my current printer installation and check with HP for any updates.   After many attempts, the utility simply CANNOT find my printer even though it is installed, works properly and even windows sees it!   No amount of recycling the ON/OFF button or rebooting the computer allows this utility to detect the printer at all.  It is installed via USB on the Windows 7 64-bit Family PC and windows updates are always fully updated.
    I am currently considering the purchase of a new HP OfficeJet 8600 Pro Plus to use as the family printer with the Windows 7 system - and move this HP PSC 2410 upstairs to connect it directly to my Windows XP Pro SP3 personal desktop and use the original CD to install it.  My Canon IP4200 Pixma has just died on my personal PC upstairs.
    However, until I do that, is there any of the Software Suite available that would work in the Windows 7 environment that would allow me to use the various functions such as Fax and cleaning that were available under the old XP environment and obtained via the CD?  Was the Suite of software ever updated for Windows 7?
    Thank you,
    Lee James
    West Sussex UK
    This question was solved.
    View Solution.

    Hi BAW9DV,
    I hate to hear you are having issues.  While there will not is not a specific software utility that will complete the tasks desired, maintenance can be completed from the front panel of the unit.  Windows also has an application for faxing from the computer as well that may work with this device. Please see the information below that may enable the functions desired. 
    Faxing:
    1. Use Windows Fax and Scan
       A. Type Windows Fax and Scan into search box
       B. Configure fax machine for use.  Click Here to view Microsoft documentation for use.  Note: This is a 3rd party website. HP and I are not responsible for content of this site.
       C. Select New Fax
    Maintenance tasks from front panel:
    Running the Clean Print Cartridges Utility Click Here
    Printing setf-test page Click Here
    Evaluate test page Click Here
    Align the Cartridges: Press setup-Press 5, then press 2
    If you the work around options are not acceptable the 8600 model would most certainly meet your needs when compared with this unit.  However I encourage you to contact HP to see what upgrade options are available for this unit. It will most likely be another Photosmart model/type unit, but in many cases upgrades are offered at a discounted rate to our valued out of warranty customers.  Global contact information can be accessed Here. 
    P.S.  If you upgrade through technical support, be sure to ask about carepacks.  Extended warranties may also be available at a discounted rate for upgrading. 
    Hope this helps!
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

  • Paper Jam for HP PSC 1610 All-in-One Printer

    Paper Jam for HP PSC 1610 All-in-One Printer:
    I had a paper jam and cleared the paper from the printer.  Now every time I turn the printer "on" it picks up the top piece of paper from the tray and runs it about ½  to ¾ of the way thru the paper feed, stops, and then displays message "paper jam clear paper and then press OK".  When I do that it simply picks up the next piece of paper off the tray and does the message again.  If I push the OK button on the printer it will simply finish the ejection and then pick up the next paper from the tray, and do the same thing.  I have examined the interior (and exterior) of the printer for paper scraps and  any other obvious sign of trouble (dirty drive wheels, missing rollers, broken springs, etc...) and can not see anything unusual. I can not print a test print because of the paper jam message.  I am running Windows XP and the printer has been working fine for months (until this recent jam).  I did all the steps from the HP fix it site including clean rollers, plug and unplugged,  carriage travel OK and more. Don't know what to do now........Any help would be great!!!!   Thank you!

    Hi my printer psc 1610 hp not picking paper

  • Paper feed out of sync on HP PSC 1510 All-in-One Printer Scanner

    Paper feed out of sync on HP PSC 1510 All-in-One(SN MY59SD224W0498). Goes to flashing orange light. With Vista Home Premium 32-bit, 6.0.6002 Service Pack 2 Build 6002. USB connection to HP Pavilion GU658AA-ABU a6250.uk .
    After cleaning ink drip tray including removing & refitting the small panel in the base towards the rear RHS of the  printer and also Super Glueing a small wedge of timber to close split shaft bearing for rear print feed rollers - looking from rear with clean out door removed this is at the LHS where the cogs are - paper feed is out of sync. When turned on with paper in feed tray printer draws in paper until about 2" (5cm) of paper protrudes from delivery slot & then stops. Paper jam is indicated by flashing orange light. On pressing Cancel/Resume, paper is expelled & another sheet taken in with the same results. Have turned off & restarted. Have moved cartridge cleaner tray right from front to rear & tested & then brought it right forward again & tested. Have turned off & unplugged power & USB & restarted after more than 30 minutes. Have uninstalled driver & downloaded & installed anew. Downloaded & ran the HP Print Diagnostic Utility. All to no avail. Any suggestions anyone?

    Hi there nobster,
    This article should cover the blinking light. However, I suspect the printer requires servicing.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Hp psc 1315 all-in-one printer

    I have installed a hp psc 1315 all in one printer on my new Mac OS X version 10.9.5.
    While I can print without any problems, I don't have access to scan a document from the printer to my computer.
    Can anyone help with this?
    Thank you.

    Hello @annlf 
    Welcome to the HP Community!
    I hope to help you with the scanning concern you have today.
    Unfortunately, you will not be able to scan using HP software with your PSC 1315 (older model), on Mavericks (newer OS X), as there is no Full Feature driver (includes scanning software) available.
    However, you do have some other options to scan. See this link for your options. Scroll down when the guide loads and select "How do I scan with the driver from Apple Software Update?"
    OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
    Have a wonderful Wednesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP psc 1210 all-in-one printer and Mac OS 10.9 (Mavericks)

    I just installed the new OS X (Mavericks) on my mac yesterday, and now my printer, an old but reliable HP psc 1210 all-in-one, will not install.  I was previously running OS 10.6 (Snow Leopord) and had no problems with the printer.  Is there anything I can do to install my printer on the new OS?  My computer doesn't even recognize that there is a printer connected via USB when I try to install it... is there anything I can do?

    Hello,
    Here is a link to a support document on hp.com on how to install on OS X Mavericks.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
    Let me know if this was usefull by clicking on the Kudos button.
    I work for HP.
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

Maybe you are looking for