Psc 2350 wont power on

The on light will not come on while it's plugged in. I pulled the electric plug from the wall and waited 30 seconds re install the electrical connection. The window will show HP Invent and shows its loading, but then freezes. Keep in mind the on light is still off.
I've inspected the connection and the module light is on (green).

I found this on the FIXYA site, so I'm going to try it.
I'm not sure if this is a solution, but it worked for me. ( who knows how long it will last, but its working for now)
Below are the steps I took:
- uninstalled all the HP drives and software
- unplugged the USB cable from the computer and printer
-unplugged power supply from the outlet and printer
-plugged the USB back in to computer and printer
-unplugged the power supply from the power module. Made sure everything looked ok,
-reattached power supply cord to module ( Made sure everything looked ok,)
-plugged power supply in to outlet ( green light was on)
-proceeded to plug power module connector to printer. ( again, making sure proper connection was made.
* this time the screen came with an error and the "on" power light was blinking.:
This was the error message:
Error:
0xb9000009165:
hw_interupt_hwv.c 
-I proceeded to unplug the power and usb from the printer
-downloaded the lastest drivers and software for the PSC 2350
-After the software was loaded and installed ( I checked the box to install with out USB communication at this point)
- plugged the power and then the USB.
-It came to life at that point. (the computer recognized the "new" product)Going through what I presume were several realignments or internal configurations.
I tested a page, and ran the HP diagnostics page. Everything checked out, and its running fine for now.

Similar Messages

  • Syncing iphone and now phone is stuck and wont power off or do anything

    syncing iphone and now phone is stuck and wont power off or do anything

    Reboot the phone:  hold down the power button and the home button at the same time until you see the Apple logo.  Ignore the "slide to shut down".  When the screen has been completely black for a few minutes, press the power button again.

  • Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

    macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

    If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
    It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
    Good luck - take the issue as high up the food chain as you can and see what happens.
    Clinton

  • PSC 2350 Blue Screen Error

    Hi,
    Recently my PSC 2350 has been having a recurring error while printing.  It will print 1/4 of a page and then stop.  The printer's display screen turns blue and show an error code of 0x887929e.  I have not been able to find any references that will decode this error for me, so I have no idea what is going on.
    This problem occurs when printing from 2 Windows 7 systems, a Windows XP system, and when attempting use the printer's own copy function, so I am pretty sure the issue is with the PSC 2350.
    Can anyone offer any insight?
    Thanks,
    dkoz314

    I just realized I submitted this to the wrong sub forum.  If a moderator is able to move it I would appreciate the action.
    Thanks,
    dkoz314

  • HP PSC 2350 won't scan in windows 8.1

    Recently purchased new HP PC operating on Windows 8.1.  My printer is an HP PSC 2350, model B209a.  I can print with no problem.  Unable to scan to PC.  Tried downloading software.  Get error message that the download is blocked which means I cannot download the printer software to the PC.    Of course, the CD that came with the printer will not work with Windows 8.1.
    What else can I try?
    This question was solved.
    View Solution.

    Thank you for the tech support and response on the community forum.  Somehow, someway after receiving my response in the forum, I got my printer installed complete with wireless function operational.  

  • Iphone 4 wont power on or charge

    iphone 4 has black screen. wont power on or charge. tried the hard reboot but fails. its like its totally locked up. is there anything i can do? please help!

    Plug it into a power source for at least 30 minutes, then reset it, while still plugged in:
    Press the Sleep/Wake button & Home button at the same time, keep pressing until you(hopefully) see the Apple logo, then release.

  • Iphone 4s wont power on

    some time my iphone 4s wont power on / and it's power on just when i connect it in charger or pc cable pleaaase help me

    try a reset, hold down the home/sleep button together until you see the applee logo and then release, then wait fro the phone to boot back up.

  • Iphone 4s wont power on, im just getting a blank screen with battery charging on front screen

    iphone 4s wont power on, im just getting a blank screen with battery charging on front screen>>>>becouse it is after damage water

    At Apple Store, if you have AppleCare +, replacement iPhone 4S costs $50, if no +, then it will cost $199. Either your battery is faulty, the power management is faulty, or the charging port is faulty, or all three. Start with battery replacement. If still problem, then try charging port with flex cable replacement. If still problem, then it is very complex fix or no fix at all possible.

  • My computer wont power up.  I have unplugged it for 30 min and replugged but it will still not power up.  Can I try something else?  cant get an appt until Tuesday.

    My computer wont power up.  I have unplugged it for 30 min. and replugged and it still will not power up.  I cant get an service appt until Tuesday.  Is there something else I can do?

    Until Tuesday, the only thing you might try, if you already have and didn't state that you did, if this is the same outlet that you have used, and suddenly you lost power, try plugging your computer into another outlet and see if that works. If it works, either try another appliance in the outlet you are having trouble with, or check to see if a breaker has tripped.
    If that doesn't work, well...you will just have tro wait until Tuesday.
    Wish you the best of luck

  • ITunes crashed now Mac mini wont power back on

    iTunes crashed now Mac mini wont power back on

    You have not provided any information on which to base troubleshooting. Minimal information would include the Model Mac mini you have for example Mid 2010 Mac mini, exactly what happened when iTunes crashed, and what -- if anything -- happens when you try to restart. It is unlikely iTunes has anything to do with the failure to reboot but instead iTunes crashed because of what even caused your Man mini to fail.
    Just as a starting point, be sure and check all your connections, power, monitor, keyboard, mouse, everything. You would not be the first to have a plug come adrift unexpectedly.

  • Iphone wont power on unless on charge and itunes cannot restore iphone,, what can i do?

    I recently bought an iphone off Ebay, the seller said it was broken and described the problems too me, the phone in my view is fixable. The main problem i have is that the phone wont power on unless it is plugged in on charge. This is where it leads onto my next problem. there are a lot of ways people are describing to restore the phone if it doesnt work. (Hold down power and home, let go of power then it goes into a certain mode which it will let it restore then connect to itunes.) My problem is that to do this i have to be connected to itunes to get it to this stage.
    the battery isnt the problem I have been told as the previous owner said they had replaced the battery already to see if that was the problem but it clealy wasnt.
    If anyone can help me to restore this phone or tell me if I need to just take it to a repare shop. If there is a simple way of doing it myself and saving about £100 I would love to hear it!!!

    Ing238 wrote:
    I downloaded ios 6 on iphone 4s,
    How exactly were you able to do that? Since the only signed software, for your phone, is iOS 7.0.3, that's the only version of iOS you could install on your phone.

  • Tv wont power in takes several attempts

    Hi I got a toshiba 32" tv from carephone warehouse with my mobile contract.
    Literally for a week it was fine but since then when we power off (standby or via plug) it takes sever attemps to get it on-somes 30 mins plus. The red light will flash to green abd itstill wont power on. When we do eventually get it on it goes off as soon as I touch any button on the cable remote and we have to start again. Sometimes itll come on but with no sound and sometimes itll come on but keep going off and restarting. Ive had the tv 3 months. I contacted toshiba and tgete were useless basically was told factory reset which did nothing or call out a tech. Why should I pay a tech to fix a 3 month old tv. Ive Google'd and kniw others have had similar issues. Any advise?
    Thanks

    It does sound like it needs repairs. It should still be under warranty.
    - Peter

  • How do you transfer data from a good G5 hardrive that wont power up?

    I have an old G5 that wont power up but the hardrive is still good, I want to pull the HD and transfer the data to my new Mac Book Pro, any suggestions? thanks so much

    Reb,
    You can do your file transfers with the swiss army knife that aqua suggested.  That was my first thought.
    http://eshop.macsales.com/item/Newer%20Technology/U2NV2SPATA/?APC=XLR8YourMac09
    However, if you purchase an external firewire drive, it will give you far more options.  You can install a clean system on it using your Mac Book Pro and try to revive your G5.  The G5 will boot from an external firewire drive but not the USB adapter/swiss knife.
    You can also open the external case, swap out drives and use it as a firewire version of the swiss army knife to transfer files from the G5.
    If you get the G5 is going, you could look at Disk Utilities and see if something on the G5 drive is the reason the computer is not starting.
    Just some options to consider.
    Jim~

  • I have an iPod touch 4g that wont power on

    Hi. I just bought a iPod touch 4g second hand. It worked perfectly when i looked at it & when i got it. Ive had it for almost a month & out of the blue it wont power on or show that it is charging. How do i fix this? Is this something that can be fixed? Could it need a new battery or charging port? Please help.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • PSC 2350

    Dear readers and technician
    I have a problem with the scanner function of my HP PSC 2350 all-in-one device and the latest Mac OS X 10.9 (Mavericks) system. With previous versions of Mac OS scanning documents was not a problem, but since there has been an upgrade to Mac OS X 10.9 (Mavericks) system is scanning documents a problem. The scan output is black pages with horizontal stripes. I have checked for software updates, HP PSC 2350 printer reinstalled via the System Preferences / Printers & Drivers, but it remains a scan probleeem.
    Also on the HP site I see to find any updates from the HP PSC 2350
    Do you have a solution to this problem?
    Thanks,
    John van der Weerd from the Netherlands

    Hi JohnWeerd,
    Welcome to the HP Support Forums.   I understand that since upgrading to Mac OS X v10.9 that when you scan you are getting black pages with horizontal stripes.
    I have included a link to a post by my associate Sunshyn2005.  She has summarized the information you need into one neat and tidy post about scanning with Mavericks when there isn’t a full feature driver available.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

Maybe you are looking for