PSC 2355 all in one stopped printing after windows 8.1 upgrade scan is OK.

I have a HP psc2355 printer which was working happliy in Window 8. I downloaded and installed 8.1 from windows store and the printer no longer works!
With  the printer status window open (via the windows control panel) the document detail appear briefly after clicking on the print button. Nothing happens at the printer end. Theres nothing wrong with the printer as I can use it on another PC without problems.
I have uninstalled and re-installed the printer using hppiw 2012-10-31 and run the HP Print and Scan Doctor V 4.1.0.29 which gives a device error "your printer is in a busy state" after any attempt is made to print  from applications or from printer/properties print test page.
printer self test prints OK.
scanner works OK
Printer is connected via USB cable rirectly to PC USB port
windows update ran this morning
3 hours wasted so far!
This question was solved.
View Solution.

****SOLVED*** Printer Properties Advanced Tab Print Processor Change settings from Print Processor hpzpplhn to winprint check Default data type is at RAW Printing OK now HP got any support jobs going?

Similar Messages

  • HP PSC 2355 all-in-one printer cuts off bottoms of letters

    My HP PSC 2355 All-In-One Printer cuts off the bottoms of letters. Photos are fine. 3rd HP black cartrige, got worse today.
     On a Mac, 10.9.3.

    Hi @timed 
    I would like to help you with your 2355 printer. A printer reset can initiate an alignment. Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; Troubleshooting Print Quality Problems with the Diagnostic Page.
    If the issue remains unresolved after following all of the steps in the link above, I recommend contacting HP.
    Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. HP will, at HP's option, either replace products under warranty that prove to be defective or refund the purchase price.
    They could even determine after troubleshooting that it is a problem with the printer, in which case they may offer you a discount on a newer model.
    The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
    To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Connecting HP PSC 2355 All-in-One printer/scanner using USB cord

    I have a Time Capsule that I use to back up both my Mac Mini and my MacBook Pro and would like to connect my HP PSC 2355 All-in-One Printer/Scanner to the network using USB cord and plugging it into the back of my TIme Capsule. I tried this once, but was unable to find the Printer. I would like to set it up so I could use both the Printer and the Scanner from either my MacMini or my MacBook Pro. It would be really cool if I could figure out a way to use Back to My Mac to print when I am away from home and using my MacBook Pro at a WiFi Hotspot. Is this possible? How can I do it? Suggestions? Thank you!

    +would it be possible to split the USB cord coming from the Printer+
    I'm afraid not. The connection must be direct to either the TC or your computer, but not both at the same time.
    Apple's Printer Troubleshooting Guide will guide you through the process of setting up the printer. Unfortunately, Apple does not offer a printer compatibility list, so the only way to really know if your device is compatible is to try to see if it can be configured.
    Perhaps HP would could help in this regard.

  • HP PSC 2355 all-in-one Paper Jam Error

    Hi. I have an HP PSC 2355 all-in-one printer that has worked well for a long time but when i switched it on today to do some printing, it made some strange noises and when i tried to print it sent an error saying there was a paper jam - but there was not !
    It feeds a sheet of paper in about half way through then stops and the error is displayed.
    I tried doing a copy, and the exact same thing happens.
    Has anyone got an idea what has gone wrong ?
    Thanks.

    Make sure to follow all steps here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00212225&cc=au&dlc=en&lc=en&product=422000&tmp_...
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • HP PSC 2355 all-in-one Carriage Jam - No paper jam found

    HP PSC 2355 all-in-one unresolved carriage jam, with no paper jam found.  I searched with flashlight through the back. Windows 7 64bit.  Printer just out of 3 years in storage. 
    Twice I was able to bypass the problem and print a single page, but then the message returned: carriage jam.
    Followed all steps suggested - no solution
    Self Test Info: Device 35, 4
    Vertical Cartridge to Cartridge Setting: 12
    Horizontal Cartridge-to-Cartridge Setting: 0
    Black Bidirectional Printing Alignment Setting: 9, 10, -9
    Color Bidirectional Printing Alignment Setting: -2  -2, -15: 5, 6, -15
    Thanks for any help you may offer.

    Hi there,
    Double check the content in this article. If you have been through all these steps the product may need to be serviced. If not give the steps a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Lost software to HP PSC 2355 all-in-one

    Hello,
    I am trying to find out how to get another CD for my HP PSC 2355 all-in-one printer. I can print with it but I can not use the scan feature because I lost my software CD. I got a new computer and I can not find the CD to download it so that I can use the scan feature. If anyone knows how I can get another CD or maybe where I can download the software please let me know. Thanks for the help.

    Hello hispanicchyna,
    I would like to provide you with some information on this. I'm guessing that your new computer either has Windows 8, or Windows 8.1 running as an operating system.
    I recommend downloading and running the HP Printer Install Wizard for Windows. This program was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
    The following link may answer your question as well: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460648&cc=us&dlc=en&lc=en&os=4132&product=422...
    Let me know if you have any further questions!
    Thank you,
    I worked on behalf of HP.

  • Can I share HP PSC 1610 All-In-One series printer through Bonjour?

    I have an iBook G4, and a Mac Mini (10.4.11- Tiger) with a HP PSC 1610 All In One series printer connected to it by USB. On my iBook G4, the printer comes up under Shared Printers in the Printer Setup Utility but when I click on it, and press Show Info it freezes.. so I was wondering, is there a way to connect to the printer wirelessly with the correct driver (because the driver doesn't show up in the driver list... and the driver is installed.)

    Hi my printer psc 1610 hp not picking paper

  • HP psc 950 all-in-one is printing half the page...cuts off the top portion of what I am printing.

    HI!  My HP psc 950 all-in-one is printing half the page....cuts off the top portion of what I am printing.  Not sure what happened to the printer.  Came home one day and the printing wasn't the same.  Possibly the kids could have fiddled with it but no one is owning up to it.    Any solution to get the printer printing normal again?
    Thanks
    -L

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Scanning in win 8.1 for HP psc 2355 all-in-one

    I can't get my HP psc 2355v all-in-one to scan.  The printer tells me to install HP software for this feature when I try to start scan from the printer. I have installed the drivers multiple times and cannot find a way to execute the scan from my computer.

    Welcome to the HP Community @bleubeck ,
    I read about how you are having troubles with scanning to your Windows 8.1 system from your PSC 2355 printer, and I wanted to reach out. There are no drivers or software available to install with this specific printer model on Windows 8.1, as the model is older and OS is newer. I would think that your best bet would be to try running the Print and Scan Doctor to see if the diagnostic tool can detect the printer and scan. If this does not work, you can also try scanning from Microsoft Paint as a work around option.
    If all else fails, you can contact HP directly and discuss your printer options to upgrade to a new printer compatible with Windows 8.1.
    Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    Good luck, and thanks for visiting the HP Forums!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Psc 1410 all in one series Printing pink

    Printer - HP Psc 1410 all in one series
    Operating system - Microsoft windows Vista 32 bit
    Ive installed the driver and the software but when i print colour the colour is pink. When I print in black and white it prints fine jsut colour is all pink.
    Jamie

    Please click here for a possible solution to your problem:
    http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&product=441115&docname=c00313147
    Let me know if that helps.
    Please click on KUDOS if you find my solution helpful.

  • Photosmart 6180 All-in-One Wireless Connection After Windows 7 Laptop Added to Network

    I replaced a broken Vista laptop with a new Windows 7 64-bit laptop.  After I installed my Photosmart 6180 All-in-One, the printer stopped working correctly when we try to connect to it wirelessly. 
    I followed all the directions HP provides for updating the printer software and drivers for Windows 7.
    We've tried all the suggestions for resetting the printer that we can find on the HP forums. 
    The printer works properly when connected via USB cable to a Vista laptop. 
    I was not able to get the printer to work via USB cable connected to the Windows 7 laptop.
    When we try to connect via the wireless signal, regardless of Vista or Windows 7, the printer goes into an endless initialization loop.
    We need to determine whether achieving a wireless connection is hopeless.  If it is not, we need step-by-step instructions on how to resolve the issue.
    The security system for the printer is WEP.  We connect through a wireless router provided by Verizon FIOS.
    Many thanks in advance for your help.

    Some of HP's printers do not support WEP shared.  If you are using WEP shared this could be the problem.  I would suggest turning off the WEP security temporarily to see if that fixes the issue.  If it does then you can look at changing the security to WEP Open system authentication.
    Mike
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    I am an HP employee.

  • PSC 2355-All-in-one

    My All-In-One PSC 2355 stopped printing multiple copies of a page, so I decided to re-install it.  After deleting the software, I found that my old disc didn't work with Windows Vista Home.  I have re-installed the compatible drivers from the HP website and all printing seems to be working fine, but it still will print only one copy of a page. Any ideas?

    I'm not sure what might have changed to cause this issue, but you may have to set the number of copies in two different locations.  First - set the number of copies when you click File and Print (which is probably what you're already doing).  Second - When you click File and Print from the app, click Properties and go into the Basics tab of the driver and set the number of copies in there as well.
    Sometimes, either the driver or the app will overide one another.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Pcs 1610 all in one stops printing in middle of web page prints shows error-rese​t on q.

    when i try to print coupons and other web page prints printing starts then stops in the middle of page the read out on the printer shows printing when i try to either turn off or cancel print out on the printer nothing happens i can only unplug printer to get it to release. also must cancel document in q. to remove problem.  paid iyogi big bucks they say it must be hardware, and of course it is long out of warranty. XP system

    I'm having trouble finding a product for the HP 4550 all-in-one.  I can find an HP 4550 laserjet and an HP Photosmart c4500 series printers.  Can you provide more detail about the product?
    Looking at your post and the fact that the shadow appeared after you replaced the black cartridge, I wonder if this is caused because your cartridges aren't aligned.  If your product has a LCD screen, look for an option to align your cartridges - likely under 'tools' or something like that in the menu.  Try aligning the cartridges and see if that helps.
    If you can provide some more details about your product, I could point you to more detailed alignment steps. 
    I am an HP employee.

  • 5610 All in One Not printing after changing both cartridges

    I just changed both the color and the black cartridges on my Officejet 5610 Aii-in-one and now it won't print anything. I did the cartridge alighment and it completed it successfully as far as I can tell.

    Hello @Matthew2913,
    Welcome to the HP Support Forums!
    I would like to assist you today with resolving the print quality issue that you're experiencing since installing new cartridges in your HP Officejet 5610 All-in-One Printer. Thank you for including in your post that the alignment went through successfully. 
    At this point I would like you to run through some print quality troubleshooting steps. Can I please have you start troubleshooting by clicking here. Once the support document opens please run through step 1, step 2, step 3, and step 4. This includes any sub-steps under each of the steps listed. Please pay close attention to the 'Missing Colours' section under step 4.
    Please respond to this post with the result of your troubleshooting. Best of luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • PSC 2355 All In One - won't scan

    When I try to scan I now get this error message - "You need to install or run HP software for this feature". I un-installed the SW and re-installed but am still getting the same message. ANy suggestions?

    Hi pressbox,
    I understand you are unable to scan and have already began troubleshooting. I would be happy to help you with your PSC 2355.
    Please first post back with the answers to these few questions.
    Is the printer connected wirelessly or with a USB cable?
    Is the printer connected directly to a wall outlet or a surge protector? (It is best to connect directly to the wall)
    Do  you have any other HP Printers installed on this computer? If so, do you still have the printers?
    Is this an HP laptop or a different brand?
    What operating system do you have? Mac or Windows?
    While I wait to hear back from you, if you have Windows, and if you haven't already tried the HP Print and Scan Doctor, please do so and let me know the outcome. You will see a wrench, a yellow exclamation mark, a red X, or a check mark next each tested item.
    The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
    Connectivity :
     USB: Verifies that the USB connection from your computer to the HP product is working correctly.
    Network: Verifies that the network connection between your computer and your network is working correctly.
    Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
    Driver Check : Checks for missing or corrupt driver files.
    Device Manager : Checks for problems in Device Manager that would prevent printing.
    Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
    Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
    Port Match : Checks the port settings for the HP product.
    Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
    Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
    Print Settings : Checks and adjusts the print quality settings.
    Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
    Scan Tests : Checks the scan mechanism, drivers, and registry entries.
    You can also click the Printer menu to find the additional features such as cleaning printheads, aligning printheads, checking ink levels, and viewing advanced printer data for your selected printer.
    Source: Try the HP Print and Scan Doctor for Windows
    Click here to download and run the utility > HP Print and Scan Doctor
    Please let me know the outcome of the tests perform, you will see a wrench, a yellow exclamation mark, a red X, or a check mark next each tested item.
    I look forward to hearing from you. Knowing the outcome of the Print and Scan Doctor will help to point us in the right troubleshooting direction!  
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for