PSCS5 won't associate with .jpg files

Last night and this morning I installed PSCS5 on both my laptop and desktop after removing PSCS4. I tried to open a .jpg attachment to an email on my desktop and received a message that it couldn't find an application. I have tried right-clicking on a .jpg, selecting Open With.. I get various suggestions (Microsoft Picture and Fax Viewer, etc.), but not Photoshop CS5. When I go to Choose Program, Photoshop CS5 is not listed under "Other Programs." When I browse to program files\Adobe\Photshop CS5 and choose photoshop.exe, and press Open, the choice does not stick (i.e. This has no effect). I have the same results on both computers. I tested the Beta, but don't remember this problem, but it may not have appeared since I had CS4 on the machine. Has anyone else experienced this and is there an answer to it?

You need to follow that thread back one level to http://forums.adobe.com/message/2844567#2844567
to get the correct answer which is to make a text file with the .reg extension and merge it to your registry
The File is
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Applications\Photoshop.exe]
[HKEY_CLASSES_ROOT\Applications\Photoshop.exe\shell]
[HKEY_CLASSES_ROOT\Applications\Photoshop.exe\shell\open]
[HKEY_CLASSES_ROOT\Applications\Photoshop.exe\shell\open\command]
@="\"C:\\Program Files\\Adobe\\Adobe Photoshop CS5\\Photoshop.exe\" \"%1\""
Edit the last line as necessary to point to your copy of Photoshop.

Similar Messages

View Master mode strange behaviour with jpg files

Hy all,
I'm using Aperture, and I'm tweakin a lot the SW to discover all secrets ....
I'm really concerned about a strange behaviour of the SW in view mode.
If I open a jpg file, do not apply ANY modification, and apply the "show master" command (pressing M), there's a subtle behaviour :
*the images get sharper !!!!*
It behaves as if an "edge sharpening" was applied !!!!!!
With _RAW files this thing doesn't happen at all._
Even stranger, if I zoom to full definition (by pressing Z), and toggle between normal view and "show master" view, the immage remains the same !
The effect is not so evident with all images, but sometimes it is !!
Anyway, I expect not to have such kind of things with a professional SW.
With professional cameras and good quality files it's really annoying not to beeing sure what's the REAL content of the jpg image.
Has anyone noted this thing ? Is there a reasonable explanation ?
The only one I tried to figure out is the following : may be Aperture applies some kind of resampling algorithm with jpg files (bicubic, bilinear, etc).
May be this resampling is not applied with 100% magnification, as weel as with raw files.
But it's only my guessing. Now, I'm tweaking other viewers and other SW to understand what's the real jpg image stored in the file : the blurer one form normal view or the sharper one with "show master" mode.
I stress once again : of course, the jpg file I'm talking about have no settings at all, just imported and toggled with M button.
Thanks in advance.
Regards,
Enzo

Hy,
I'm afraid I'm not been clear.
The problem is this :
1) jpg image opened in normal view mode, no zoom, (no quick preview, of course) : image with a certain amount of blour
2) jpg image opened in show master mode, no zoom, (no quick previre, of course) : image SHARPER with respect with the previous.
No edit applied from import, so "show master" command shouln't apply any change in rendering, should it ?
The only thing I said on 100% view is that such difference (between normal mode e show mastermode) is not present with 100% magnification.
That was the issue.
Enzo

Adobe Reader does not automatically associate with PDF files in Xp Sp3

I have reinstalled Reader (twice) and it does not automatically associate with PDF files.
How do I fix this problem?
Cheers, JH

The thing is, when I right click a pdf file, and then go to properties, change default program to open with, select browse, I select it in the correct folder, when I click open, it doesnt open and the programs stay blank, so I cant select anything. There is nothing to select. And I have re-installed. But at the end of the install there are no options what file types to associate with. Any way to do it inside Reader?
I have reader 9.2.0. and Win7 up to date. When I'm opening and closing allot of files the whole time, I don't want to do inside reader. Help please?

I am unable to open scanned documents (with .jpg file extension) in my e-mail inbox, on the Mail app on my iPad. Please provide a clear answer. Thanks a lot.

I am unable to open scanned documents (with .jpg file extension) in my e-mail inbox, on the Mail app on my iPad. Please provide a clear answer. Thanks a lot.

Can you actually see that the attachment has a .jpg extension? Some mail systems strip it off (I've seen AOL do that) which makes the attachment difficult to open.

I seem to be having trouble "save" or "save as" with jpg files. Any Suggestions?

I seem to be having trouble "save" or "save as" with jpg files. Any Suggestions?

By the way, a full uninstallation and reinstallation is a bit heavy-handed and is not always necessary.
Keep in mind that with Photoshop CS6 the Plug-ins subfolder is now normally completely empty. So to undo an inappropriate copy of plug-ins generally you can just delete all the copied plug-ins and that will restore proper Photoshop CS6 operation.
Then you can reinstall your needed 3rd party plug-ins one by one.
-Noel

I seem to be having trouble "save" or "save as" with jpg files.

I seem to be having trouble "save" or "save as" with jpg files. Any suggestios?

Awol2010 wrote:
Any suggestions?
Yes. - clarify what trouble(s) you are having.

Camera Raw won't open certain JPG files from Bridge, others open in ACR with no problem.

Edit: This was orignally posted in the Photoshop > Macintosh forum, which I failed to realize was read only. Thanks to a PM headsup, I'm reposting it here. Thanks
I've searched the internet and the Adobe forums and cannot find a direct answer to what I'm dealing with.
The issue I am having is that Bridge CS5 (current version 4.0.5.11) will open some JPG images in Raw with no problem and others nothing happens at all. All the images come from the same source (Fujifilm Frontier SP2000) so I really don't understand why Bridge ignores some of them as being openable in RAW. For example, say this roll of film has 36 images. If I "Select All", right click, and select "Open in Camera Raw", it will open whichever it deems acceptable in RAW and nothing happens at all to the others (The RAW dialog will, for instance, only open 10 images instead of all 36, and the remaining images are not altered in any way).
I've made sure that Photoshop is prefering Adobe Camera Raw with Supported Raw Files and in Camera Raw Preferences I have the box ticked to Automatically open JPGs with Settings but nothing helps.
My work around is to one file at a time in the Photoshop Open dialog, selecting an affected JPG file and have it open them as Camera Raw instead of Jpeg.
Any ideas? It's done this for quite a while and I have no idea how to fix it.
Thanks.
Cary

Cary,
It could be an insufficient memory problem. Please supply details about your machine.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Also, please note that the Camera Raw forum is here:
http://forums.adobe.com/community/cameraraw
Thanks!
Wo Tai Lao Le
我太老了

File types won't associate with Photoshop CS2

I have installed Photoshop CS2 as a part of the Video Production Suite. I am having difficulty associating my image file types to PS CS2. Windows defaults to its image viewer and will not change in the Folder Options in Windows. How can I do this within Photoshop?
When I installed from the DVDs I was not presented with the File Association Window, as the the Help file indicates.
Thanks!

check edit preferences in bridge. there's some file handling prefs in there. set cs2 to handle the images that you want it to.

LV 8.2 won't associate with VIs and uses 7.1 RTE?!?!

Hi,
I'm in the process of creating a new exe of our project. A strange thing keeps happening and I don't know what's wrong. I had LV 7.1 installed on the machine, as well as LV 8.2 to transition to the new version. I created an .lvproj and built a new .exe of our application. Lo and behold, it flashes the LV 7.1 flash screen and then asks me to select the VI I want to run, when i select the main VI of the application, it simply gives me an Error 9 message and says that that vi is compiled in version 8.2 of LV and won't open. I tried right-clicking on a vi and trying to force it to associate with 8.2, that didn't work. I uninstalled 7.1 and the 7.1 RTE entirely and when I try to run my LV 8.2 built exe it STILL manages to use the 7.1 run time from somewhere.
After that I tried to re-associate them with 8.2 yet again to no avail. When i run my exe it just tries to open them in the non-existing 7.1 RTE and re-associates them all with 7.1. Please help, i think this is a bug.

Justin,
Thanks for the reply. I do understand how bizzare this must seem to you, I had the same reaction. I know perfectly well the behavior of LV built exe, been using it for 5 years. The problem here is the bizzare behavior of the .exe (any in fact, i've built several test vis and exes) on 3 different machines.
I'll try to explain what's happening:
1) I create a new project
2) I add my Test.vi to the project
3) I set my Test.vi as the startup vi (Test.vi simply calls my main vi via the vi reference).
4) I build the exe and execute it
5) Upon execution, an LV 7.1 splash screen pops up for a brief second and I get an Open VI file dialog box asking me to select a VI I want to open, all the VI files inside that window take on the appearance of LV7.1 icons, instead of 8.2. If I try to select a VI from that window, I get LabView load error 9: VI version (8.2) is newer than LabView version (7.1).
I'm used to that error after you recompile a 7.1 vi to 8.2, but I don't even have LV7.1 installed. It seems like the exe is trying to use LV7.1 RTE to run itself instead of 8.2. I though I have 8.2 RTE automatically installed by LV Dev, but I guess not since it doesn't show in Add/Remove Programs menu, but it DOES show up in MAX under software, go figure. I wish I could get someone in NI to look into this. I've never had a problem like this, it is happening on 3 PCs here and is taking up a lot of work time. I have source code I can send as well as a short video of what's happening on my machine.

Photoshop cc does not associate with psd files?

I have a simple answer to the problem of photoshop cc not being able to associate psd files and not showing in the options window when you try to associate it with the psd file? How do I get it into the forum where it belongs?

Photoshop does associate with PSD and PSB files on both platforms.
It sounds like your OS is confused about the available file associations.
Which OS version are you using?

Aperture won't recognize Panasonic JPG files

I just recently picked up a Panasonic DMC-FZ200. All of my previous photography has been with Nikon/Canon.
I took a SD card with some JPG files and when I go to import it, Aperture shows no files on the card. When I look at the card in Finder, the files are all there and readable. So I used Finder to copy the files to my hard drive.
I went into Aperture and pointed it to the hard drive directory where the JPG files were. They show up in Finder, they don't show up in Aperture.
I go into iPhoto, point it to my Aperture Library, and then I ask iPhoto to import the images from the SD card. That works fine. iPhoto has no problem. I then quit iPhoto and bring up Aperture using the same library and the pictures show up just fine. So my question is this: Why can iPhoto see these pictures and bring them into the Aperture Library, but Aperture can't see the pictures on the same card plugged into the same computer.
As an FYI, I have the latest versions of both Mountain Lion and Aperture, and the computer is a Macbook Pro mid-2012 15" retina display with 16GB of memory.

Frank,
I can't thank you enough. I normally am set to RAW + JPEG and I usually shoot both. This morning I shot some RAW only and I am guessing that the setting automatically flipped to RAW ONLY as a result? And then it stayed there when I showed up with my JPEG only?
Anyway, I've been using Aperture for several years and processed many thousands of photos through it without running into this and was at my wits end before I posted. I can't thank you enough for the help.
The people on these forums are the best. My hat is off to you, Frank Caggiano.
Mike

FCP crashes with JPG file

I've tried this on 3 different Macs so I know it's not hardware related. Anyway, I have a very large jpg file (2.7 MB, 4018 x 5206 in size). Importing the file itself is fine, but when I bring it into a sequence as a background to a keyed out piece of video, FCP will instantly crash.
I am suspecting it is because the jpg file is too big. The reason I have to import the jpg in this size is because the client wants the jpg constantly moving while it is zoomed in. Is there another way I can do this?

I wonder if there's something corrupt with the jpg file? Try doing a "Save as..." under another name and see if that file works.
You shouldn't be having these problems with FCP, so I don't think Motion is necessarily the way to go. I did a quick search ("jpeg crash") through the FCP forum and came upon this disucssion:
http://discussions.apple.com/thread.jspa?messageID=3590555&#3590555
Check this and look into other FCP discussions that might help...
Hope that helps!

InsertHTML won't work with XML files

I am trying to create a command that writes text to an open
XML file. The command I've created works fine under some
circumstances but not others.
It works if I open an XML file and apply the command without
editing the file. If I make any edits to the file manually and then
apply the command, it doesn't insert anything.
It works fine with HTML files in design view, but in code
view, if I make any edits and then run the command, nothing
happens. If I switch to design view and back again, the command
then works fine.
I tested the built-in Dreamweaver command "Flash Text" on an
XML file (after editing it so it could be used with an XML file),
and the same problem occurs with this command when using it on an
XML file. The problem didn't occur with HTML in code view, though.
Below is the .JS file for my command. The corresponding HTML
file contains only an empty form.
function canAcceptCommand() {
return(true);
function isDOMRequired() {
return false;
function commandButtons()
return new Array( MM.BTN_OK, "cmdOK(); "
, MM.BTN_Cancel, "cmdCancel();");
function cmdOK()
var theDOM = dw.getDocumentDOM('document');
theDOM.insertHTML("test", true);
window.close();
function cmdCancel()
window.close();

I need a function, though, that will insert text at the
cursor location in an open file.
I'm also discovering that the command I created above
functions erratically even when it does deign to insert the text in
an XML file. The text is usually inserted somewher other than where
the cursor is located.

BrowserLab won't work with local files in DW CS5

Any issue report you make about BrowserLab on these forums should minimally contain the following information. If it doesn't, the first response you get from us will likely just ask for the missing info anyway
Subject
A descriptive summary of the issue.
The body should contain:
Problem Description
A brief description of the bug or issue
Steps to Recreate
The steps we should follow to reproduce your issue. Minimally include all the following:
Does the issue happen every time, is it sporadic, or did it only happen once.
Are you testing on Mac or Windows?
Are you using the main BrowserLab interface, testing via Dreamweaver integration (and if so, what version of DW), or using the BrowserLab for Firebug add-on?
What is the URL you're testing against. If it's not public, let us know and let us know if you can send us the page source.
Expected Results
Based on the steps you described, what you thought should happen
Actual Results
What actually did happen
Thanks everyone,
Mark
Using BrowserLab in DW 11.0 Build 4964, BrowserLab can't seem to work. Some not very intuitive places I have checked include making sure the signon credentials are in the CSLive window in DW.
In preview local/browser, the following messages are disappointing me:
Timed Out, Failed to Authenticate with Browserlab
Session Expired, See Browser
It is on a Mac, 10.6.7, using DW integrated testing. I can log into browserlab and put a public URL, but I don't think that's going to be much better for me than having VMWare and installing free browsers on Mac and Windows, and given the failures here that would be better for local file checks too. I write this because I wonder if I will be disappointed trying to get this to work and then find out I have to pay a yearly subscription to CSLive to be able to keep using it.
This is on a private URL and I can send the page source, but I don't think its the page that is causing the issue.
Expected results:
Able to preview page in any browser of my choosing
Actual results:
Spent the last two hours navigating help, googling possible solutions, getting many errors trying to navigate the Adobe help and forums, continually signing in on each adobe page I open. Expecting to have to reauthenticate to post this message. (Updated extension manager as well).

Hi,
First, there is no charge currently for using CSLive and there won't be any charge for another year.
Second, based on what you're saying about the behavior you're seeing with BrowserLab and the issues you had with continually having to sign onto the Adobe pages, it's a strong indication that you've got cookies disabled in your browser or that something on your machine is deleting/expiring the cookies we are trying to set. What browser/version are you using and what kinds of permissions have you got set for cookies in that browser? Can you check that and change your cookie permissions for Adobe.com at least?
Let me know if that helps or not,
Mark

Help needed please.. with JPG file

Hi all,
I am a Forms developer that DOES NOT use Jdeveloper so go easy on me!
I have with the help of this forum amended the Java Bean Forms graph to create a JPG from the Graph bean. Our original problem was the need to print the graphs that were displayed, the forum very helpfully guided me through creating a JPG and i used Forms to open this and therefore user can then print it.
I have used the following:
File f = new File((String) _object,"img.gif");
FileOutputStream fos = new FileOutputStream(f);
m_graph.exportToGIF(fos);
I then use Forms to Pass the clients temp location and save the file to the local PC temp location as img.gif.
Unforunately this came up with user rights problems and in order to make this work we needed to sign the certificate. BUT by signing the certificate it meant EVERY one of our customers has to approve the changes once we give them the new JAR. Unforunately we use (as per Oracle Certification) JRE 1.4.2_13 and when the customers go to approve the changes it crashes JAVA (if they have previousely used the system). The only way to get round this (that we have found) is to clear all signitures and clear cache on the JRE. This is something that our customers will not accept doing.
I posted that initial JRE problem but not had any comeback so my next question is. Is there a way to do what we need to do without the need of signing the JAR?
The graph pre these changes did not need the approvals. So im assuming its the fact we want to place something on the Client PC is what is requiring the approval. Can we do what were doing but place the JPG on the Server and use something like webutil to get the file over. Meaning we dont need to use a different JAR?
Any help would be most appreciated

Hi,
I cannot help you much on the issue, but I can confirm some of your thought. Signing is indeed required because you're trying to access the user's PC, which is a potential security breach hence why Java requires that the user agrees to it when the application goes out of the normal sandbox. You can check out http://www.securingjava.com/chapter-two/ as an introduction on the subject.
I don't really get your use case though, you simply want to print the generated gif file right, so why do you write it on the user's hard drive?
Regards,
~ Simon

PSCS5 won't associate with .jpg files

Similar Messages

Maybe you are looking for